fvdl
44954feab8
Add a driver for the Intel IGPE1000 PHY as found on 82541 and 82547 chips.
...
Not yet enabled anywhere.
2003-10-28 00:15:40 +00:00
fvdl
4784db999a
Regen after clarifying IGPE1000 name.
2003-10-26 22:25:53 +00:00
fvdl
4589fc061f
Make the name of the IGPE1000 a bit clearer.
2003-10-26 22:24:58 +00:00
fvdl
7ec692e7d5
Regen after adding IGP01E1000.
2003-10-26 21:35:13 +00:00
fvdl
065b2aa956
Add Intel IGP01E1000 phy.
2003-10-26 21:34:44 +00:00
tron
9340e9d695
Fix build problem caused by integration of new I2C framework.
2003-09-30 09:35:15 +00:00
briggs
7f9445d14a
It is best to allow a little time for the reset to settle in before
...
we start polling the BMCR again. Greg Woods noted on tech-net@
that the DP83840A manual states that there should be a 500us delay
between asserting software reset and attempting MII serial operations.
I've also noted that a DP83815 can get into a bad state on cable
removal and reinsertion if we do not delay here.
This may well address PR/16346, and I seem to recall occasional
reports of auto-negotiation and flaky kinds of errors that this
might also alleviate.
2003-09-10 05:25:22 +00:00
tsutsui
4189ddf652
Remove advertising clauses from code written by Shingo WATANABE.
...
He has kindly consented it.
2003-09-04 15:17:38 +00:00
hannken
b32066575d
Regen.
2003-07-17 12:40:56 +00:00
hannken
7b247f3812
Add support for the BCM5705:
...
- Only BCM5705M asic rev A1 was tested.
Thanks to Bill Paul (wpaul@freebsd.org ) for help and support.
Approved by: Frank van der Linden <fvdl@netbsd.org>
2003-07-17 11:44:26 +00:00
msaitoh
74b3acef2e
- last commit (rev. 1.36) add a entry to keep model number of the PHY in
...
mii_softc. There are some situations to want to check model number.
- add comment
2003-07-01 22:58:48 +00:00
msaitoh
d8a4a08a24
- last commit (rev. 1.32) fixes icsphy_reset()'s problem. ICSphys don't
...
restart auto negotiation, so it kick.
- add comment in icsphy_reset()
2003-07-01 22:51:13 +00:00
msaitoh
5af1b6934b
Add ICS1889 and 1892
2003-07-01 22:46:08 +00:00
martin
b464a5b71f
Only read media status bits when they are valid.
...
From Makoto Fujiwara in PR kern/21810.
2003-06-06 23:22:56 +00:00
scw
37a9b25563
Match Broadcom's BCM5214 Quad 10/100 media interface.
2003-05-02 19:42:35 +00:00
scw
4c6f8bfaa7
Regen
2003-05-02 19:39:47 +00:00
scw
5f24295efa
Add entry for Broadcom's BCM5214 Quad 10/100 media interface.
2003-05-02 19:39:29 +00:00
thorpej
c31f87a5cb
Use aprint*().
2003-04-29 01:49:33 +00:00
kristerw
b8943cbf89
Save some text segment space by not defining URLPHY_DEBUG.
2003-04-04 22:21:39 +00:00
drochner
ba0f309a91
Before checking the (Intel specific) SCR_T4 register, make
...
sure the chip implements 100T4 (in BMSR).
The 82562 (which doesn't implement 100T4) has the SCR_T4 bit
(always?) set, which led to wrong media status reports.
approved by thorpej
2003-03-27 19:36:49 +00:00
matt
52f7db1beb
Fix C&P tpyo.
2003-03-07 00:14:38 +00:00
matt
c4d8a6226e
Make the intel phy match the i82562 phys.
2003-03-06 22:38:09 +00:00
matt
4630a8e7f3
Add a MIIF_FORCEANEG flag to be passed to mii_attach. This forces an
...
autonegotiation to take place if IFM_AUTO is selected in mii_media_set.
Make the gem driver use it. (XXX hme probably should use it but I can't
test that).
2003-02-20 00:55:21 +00:00
matt
ee04df9a4d
Add support for Am79C87[45].
2003-01-26 06:25:08 +00:00
matt
5ade701481
Regen.
2003-01-26 06:21:03 +00:00
matt
b9f79bf02f
Add AMD Am79C87[45] (which use the Altima OUI).
2003-01-26 06:20:30 +00:00
gendalia
1f71c142cd
Add altima (broadcom) AC101L, phy for 3com 3c905cx-tx on nForce2 MCP-T
2003-01-17 06:23:52 +00:00
gendalia
6672d83048
regenerate to match miidevs, added ac101L phy
2003-01-17 06:21:13 +00:00
gendalia
3f50762f0c
Add altima (broadcom) AC101L, phy for 3com 3c905cx-tx on nForce2 MCP-T.
2003-01-17 06:20:07 +00:00
jonathan
1556fd569d
Update first 16-bit word of 5401 DSP patch to match latest Linux drivers.
...
Add comment saying what the magic values do: disable tap power management.
2003-01-16 20:02:05 +00:00
jonathan
0ecaf20a9d
regen machine-generated files from miidevs rev 1.44 (bcm5704 phy)
2003-01-16 18:46:08 +00:00
jonathan
4b1bc17628
Add PHY entry for bcm5704c (copper) integral phy to miidevs.
...
Add 5704 phy and dsp patch, and untestsed dsp patch for 5703, to brgphy.c.
2003-01-16 18:43:40 +00:00
thorpej
72a7af27b0
Use aprint_normal() in cfprint routines.
2003-01-01 00:10:15 +00:00
matt
78b64fd232
Recognize BCM5703 phy. (with this and the bge changes, the bge0 on my
...
ASUS P4PE m/b is now working)
2002-12-27 03:15:52 +00:00
matt
9d04e25e82
Regen.
2002-12-27 03:14:23 +00:00
matt
2860168d98
Add BCM5703.
2002-12-27 03:14:06 +00:00
martin
e750674637
Regen (MYSON MTD803 added)
2002-11-07 20:37:03 +00:00
martin
d407db9cfd
Add MYSON MTD803
2002-11-07 20:35:55 +00:00
thorpej
d52f5f8ecb
Make mii_media_active unsigned.
2002-11-07 07:45:03 +00:00
thorpej
499a491929
Fix signed/unsigned comparison warnings.
2002-11-07 07:41:22 +00:00
perry
43ed640ca5
fix lint warnings about things being stringified under cpp -traditional
2002-10-23 01:50:11 +00:00
fair
03f1a009cb
If pnaphy attaches, make sure the mii_flags has MIIF_IS_HPNA in it.
2002-10-13 06:28:01 +00:00
thorpej
c9b3657ce9
Add trailing ; to CFATTACH_DECL.
2002-10-02 16:33:28 +00:00
thorpej
71adb76f75
Use CFATTACH_DECL().
2002-09-30 21:57:46 +00:00
wiz
b1c7ac0e6d
"definitions" has lots of 'i's, but that's not reason to leave one out.
2002-09-29 23:23:56 +00:00
thorpej
0720e04052
Remove a debugging printf.
2002-09-28 19:07:43 +00:00
scw
cbc5db835b
Try a little harder to work around the "Isolated After Reset" lossage.
2002-09-28 10:27:21 +00:00
thorpej
f818766afe
Declare all cfattach structures const.
2002-09-27 20:31:45 +00:00
provos
0f09ed48a5
remove trailing \n in panic(). approved perry.
2002-09-27 15:35:29 +00:00
thorpej
6c88de3b53
Introduce a new routine, config_match(), which invokes the
...
cfattach->ca_match function in behalf of the caller. Use it
rather than invoking cfattach->ca_match directly.
2002-09-27 03:17:40 +00:00
