9c93a8b8ff
add PCI_CONFIG_DUMP as a defopted option
2000-03-22 00:43:47 +00:00
7990787b1b
opt_pciverbose.h -> opt_pci.h (it's gonna be used by more things, soon)
2000-03-22 00:36:29 +00:00
1e0edbf862
regen
2000-03-21 18:51:43 +00:00
1173b4b28d
add two VIA VT8371 devices
2000-03-21 18:51:08 +00:00
95a8d1bfcd
Try to use memory mapped I/O on everything but the SMART-2/E.
2000-03-21 13:45:16 +00:00
979d79d931
Use sc_cfg4 for the Am53c974.
2000-03-20 05:48:28 +00:00
2d937cc876
Make it a bit more clear which functions are specific to which models.
...
Split off register definitions into eapreg.h.
Remove duplicate codec reset.
2000-03-19 17:11:50 +00:00
638726b0db
* rework the quirk table ('device_tab'):
...
* QUIRK_NOMSG only has any meaning when NCR_GETCC_WITHMSG
is defined. Therefore, there's no harm in using it when
NCR_GETCC_WITHMSG is not defined. so, simplify the table
by removing the #ifdef.
* there's really no point in having table entries after
an entry which will match everything.
* add some comments, clean up spacing.
* add an entry for "QUANTUM"/"ATLAS IV" drives with flags
QUIRK_NOTAGS|QUIRK_NOMSG. (I included the latter flag only
because everything else had it before! ... which means that
all the functionality added with the NCR_GETCC_WITHMSG define
would never get used! *sigh*) The latter fixes the problems
I was having on an Atlas, and should fix the problems mentioned
by Hans Hoppe <hopha@casema.net> in comments on PR#7694.
2000-03-18 06:59:02 +00:00
52b7212c58
undo the non-script changes from rev 1.87. They caused problems in
...
1.4.x and i have concerns (but no concrete proof) they will cause/have caused
problems in -current as well. Really, the right way to fix this is to
rewrite the driver, and push up tagged queueing handling into a common
middle layer that'll do it right in a low-level-driver-independent manner.
I'll fix my particular issues by using the ncr driver quirk mechanism.
2000-03-18 06:47:28 +00:00
bd1cc85c63
Use a kvtophys() hack for mips like for alpha. No idea if it actually works..
2000-03-17 11:30:14 +00:00
5c0cae7a28
Fix botched merge in previous.
2000-03-17 09:25:22 +00:00
0bf221f2d9
- remove leftovers of FreeBSD code in #if 0/#endif
...
- fix a bug in ti_encap() where a NULL pointer could be used if we run out
of tx descriptors (return ENOMEM instead, and let the caller assert OACTIVE)
- sync boot messages with NetBSD's pci standart (print ti_name and irq
line)
- add a shutdown hook to stop the board, so that the board will not DMA at
random places while we're rebooting
- convert all but TIGON 1 transmit descriptors to use bus_space
(this last one isn't trivial to get rigth and I don't have the hardware to
test)
- If we can't map the mem space linar, retry to map it nolinear. Punt if
we couldn't map the mem space linear and we found a Tigon 1 chip.
With these changes a Tigon 2 board (netgear BA620 at last) can be used in
my DS20.
2000-03-17 09:20:16 +00:00
93eb82ff2f
Recognize the Intel InBusiness.
2000-03-16 23:41:40 +00:00
56460ec830
Regen.
2000-03-16 23:41:30 +00:00
3f182de5c6
Add product ID for the Intel InBusiness 10/100 Ethernet adapter (which
...
is an i82559 with a different product ID).
2000-03-16 23:36:44 +00:00
70063dc527
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 14:52:22 +00:00
1a774a9979
Set bus_intr to ahc_pci_intr.
2000-03-16 10:34:33 +00:00
c38405d33d
Add power management support to the `tlp' driver. The battery on my
...
laptop lasts a whole lot longer now.
2000-03-15 18:39:50 +00:00
14620f1eee
PCI frontend for new ahc driver.
2000-03-15 02:33:52 +00:00
b6f22443bb
Remove ancient code.
2000-03-15 00:38:40 +00:00
60ed7cfb2b
Simplify the code a bit.
2000-03-14 10:26:10 +00:00
70b8e188ee
Don't think that a card is inserted if there is a card already in the slot.
...
Note that powerdown hook calls pccbbintr so that it detect card insertion or
removal during suspension.
2000-03-14 10:23:16 +00:00
d454505125
Cosmetic change.
2000-03-14 10:20:09 +00:00
e58bd0c365
Regen
2000-03-14 01:46:56 +00:00
67027b1103
Add product ids for some VIA Technologies VT82C686A southbridge devices.
2000-03-14 01:45:11 +00:00
b3cf850817
Fix typos in comments.
2000-03-14 01:29:30 +00:00
f91ce51084
Regen.
2000-03-13 17:24:14 +00:00
e22c4b3d1f
Add a bunch of Compaq array controllers.
2000-03-13 17:23:26 +00:00
e750135b5e
A few things:
...
* Initialize PCIC_INTR and PCIC_CSC_INTR on all chips, not just TI.
* Leave card detect interrupts enabled in PCIC_CSC_INTR. (This requires
reading PCIC_CSC in the interrupt handler on some chips, so do that too.)
* Leave PCIC_INTR_ENABLE set, as some chips require this to post card detect
interrupts while in PCMCIA mode.
* Leave PCIC_INTR_RESET (which is inverted) set at all times *except* when
powering up a socket, as some chips will use it to drive RESET# low even
while a CardBus card is in the slot.
This makes PCMCIA and CardBus cards works with some TI chips. Cross-checked
with a Toshiba ToPIC 95B.
2000-03-12 11:31:53 +00:00
30f73f1831
support bus probes a la "badaddr" and VME interrupts, fix error handling
...
after mapping problems
2000-03-12 11:23:06 +00:00
e135f943fa
add support for DMA mapping, bus probes ala "badaddr" and VME interrupts,
...
improve diagnostic output
2000-03-12 11:21:02 +00:00
1203bdcbb3
Bus_space-ify TGA register accesses.
...
(raster operations are still using pointer-based access)
2000-03-12 05:32:29 +00:00
602faa83a8
Do *not* fiddle with the serial/parallel IRQ mode selection on TI chips.
...
Without extensive probing, we cannot possibly know that we're doing the right
thing.
Also some stylistic changes.
2000-03-12 04:34:29 +00:00
781b535703
Revert the previous change.
2000-03-12 04:27:12 +00:00
c7a13f6116
Revert the previous change. It does not match the commit message *and* was
...
incomplete (and probably quite broken).
2000-03-12 04:25:57 +00:00
5c64f2064d
Add missing sc_pil_intr_enable member to pccbb_softc.
...
XXX Double check this, please. The code appears to only use it as a
boolean, but...
2000-03-12 01:15:04 +00:00
27fe6c0aee
regen
2000-03-11 16:13:39 +00:00
d01b78affd
Add id for Alliance AT25, as sent by Dave Sainty in kern/9596.
2000-03-11 16:13:14 +00:00
2d525b16dd
The shortened 1371 reset delay in revision 1.32 doesn't seem to be
...
quite enough for my 1373, so increase it some.
2000-03-11 06:42:37 +00:00
b58bf3c7bb
Don't reset cp->hw_ok ro 0 when cp isn't initialised in cy693_chip_map()
...
(used only in failure case). Pointed out by Wolfgang Solfrank.
While I'm here correct indentation.
2000-03-10 21:21:48 +00:00
173f823e3a
Only apply power on 3.3 V CardBus card (there are no 5 V CardBus card.)
2000-03-10 11:08:49 +00:00
c70220f2a2
Move PCIIDE_CHANNEL_NAME macro to pciidereg.h.
2000-03-09 20:26:31 +00:00
0542cec055
put "#ifdef __alpha__" around "alpha_mb()" calls
...
(I know the driver is useless without console initialisation, but it
should at least compile.)
2000-03-09 18:40:36 +00:00
24ea2caf14
regen
2000-03-09 09:53:03 +00:00
3abb87c0f5
Add Conexant SoftK56 PCI Software Modem, Sony CXD3222 OHCI i.LINK(IEEE 1394)
...
PCI controller, Sony Memory Stick I/F Controller
Ids send by John Hawkinson in kern/9588
2000-03-09 09:50:49 +00:00
5eee9ca94c
Determine the size of the SROM by probing the chip using the standard Microwire
...
protocol. Eliminates the need for srom_quirks and some other trash.
2000-03-07 00:39:17 +00:00
91c44a72b8
Set ifp->if_baudrate as appropriate.
2000-03-06 21:02:37 +00:00
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
c34cce88c4
Add support for the AMD 756 DMA/UDMA IDE controller, provided in
...
PR kern/9536 by Dave Sainty.
2000-03-06 18:02:26 +00:00
d97becf28e
Make Creative Soundblaster PCI 128's work -- from Masahiro Ishiyama
...
Note that on device close, there's a sharp pop that probably should be fixed.
Note also that the device is hanging the machine at times for brief
periods inside audio.c::audiogetinfo(), but I haven't yet figured out
why.
2000-03-06 03:18:11 +00:00
c74ea28746
Support the W89C940F alternative ID.
2000-03-06 03:07:08 +00:00
9e870c5a88
Regenerate from pcidevs.
2000-03-06 02:32:31 +00:00
1a0eab6fa3
Add SYMPHONY 83C553 PCI-ISA bridge.
...
Add alternative ID for Winbond W89C940F.
2000-03-06 02:31:19 +00:00
23af6e53fd
Moved things around a bit so that TGA2 can be used as a console.
...
Addresses PR: port-alpha/9542
2000-03-05 07:57:52 +00:00
1dfdd10eae
I got the mode sense bits of the monitor wrong they needed a twiddle (~).
2000-03-05 02:30:57 +00:00
c98328e9df
Regen from "pcidevs".
2000-03-04 13:24:24 +00:00
947ec630de
Add AMD Athlon chipset related devices. Patch supplied by Dave Sainty in
...
PR kern/9533.
2000-03-04 13:23:26 +00:00
f939818426
Added basic TGA2 support to the TGA driver. Abstracted the RAMDAC
...
code out into ../ic/bt485.c. Disabled tga_bt463.c, which we don't
currently support.
2000-03-04 10:27:59 +00:00
285a315e99
Simplify the winlist code.
2000-03-01 23:40:26 +00:00
7da6407d04
add (minimal, PIO only) support for the popular "Tundra Universe"
...
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
2000-02-25 18:22:39 +00:00
c86b7572f9
Cosmetic change.
2000-02-25 00:23:57 +00:00
5ed29fa2d6
Delete a superfluous newline in attach message.
2000-02-24 03:42:44 +00:00
7f8cdf038f
Fix a missing closing parenthesis in an error diagnostic
2000-02-23 08:31:25 +00:00
d94804a788
Pccbb maintains the interrupt handlers for 16-bit PC Cards
...
by itself.
Add some comments.
2000-02-23 07:28:54 +00:00
347823e807
Include dev/isa/isavar.h so that this file compiles again.
2000-02-22 22:46:16 +00:00
3f9cf7572c
Don't use void * for chipset tags. Bad hacker, no biscuit.
2000-02-22 16:04:44 +00:00
b785bb47a0
Establish a powerhook and make sure the card detect interrupt is enabled
...
after resume from suspend, as i82365.c does.
This is a workaround for newer Sony VAIO notebook.
Patch is submitted by Atsushi Onoe (onoe@sm.sony.co.jp ) in PR#9463.
2000-02-22 02:35:26 +00:00
70bbb1b84e
Sync PCMCIA memory mapping with a change from rev 1.47 of i82365.c:
...
always map attr memory 8 bit, since its defined that way. (chopps)
2000-02-21 01:44:36 +00:00
3a76270201
deal with a DELAY vs. delay issue
2000-02-20 22:19:29 +00:00
717d5b1cc3
Support for > 12 byte commands for parallel SCSI.
2000-02-19 01:54:42 +00:00
4331d2bcaa
Regen.
2000-02-16 04:29:32 +00:00
021ff75015
Add Toshiba ISA bridge.
2000-02-16 04:29:20 +00:00
6eba47aa8f
add (untested in NetBSD yet) Qlogic 12160 (Ultra3) suppot
2000-02-12 02:22:37 +00:00
f522d6f1ee
Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk.
2000-02-08 16:26:23 +00:00
b3cffb232f
regen
2000-02-08 16:24:00 +00:00
b614c6a569
Add US Robotics vendor ID, and USR 3CP5609 PCI 16550 Modem product ID.
...
From Kent Polk.
2000-02-08 16:22:37 +00:00
dbeafc9dbe
clean up some printfs
2000-02-06 08:14:13 +00:00
6d8c9583a7
indent this file
2000-02-05 18:42:37 +00:00
101848d272
run this through indent with some comment cleanup -- more knfing needed.
2000-02-05 18:20:08 +00:00
29be498635
Add a list of all the currently supported boards
2000-02-04 13:16:22 +00:00
cbacaf54d7
Add AdvanSys U2W (LVD) boards support
2000-02-03 20:28:26 +00:00
fd2fd888ef
Add AdvanSys U2W host adapters
2000-02-03 16:56:23 +00:00
787999d9e4
Add AdvanSys U2W boards
2000-02-03 16:51:42 +00:00
5b67628108
regen
2000-02-03 13:58:55 +00:00
1533d39d9e
2 Micro -> O2 Micro
2000-02-03 13:58:28 +00:00
eed75dbc26
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:09:38 +00:00
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00
d8e72e215d
implement probing for available irqs on non-cirrus pcmcia controllers
...
including cardbus controllers running in pcic mode
2000-02-01 22:39:51 +00:00
547bd53f89
Add support for the SiS 7016.
2000-01-31 18:36:12 +00:00
f457f7c969
Regen.
2000-01-31 18:34:51 +00:00
a2efc77ee1
Add SiS 7016 10/100 Ethernet.
2000-01-31 18:34:19 +00:00
b1ec3fa901
Give the ISV filter a chance to verify 21143 pass 4.1 SROMs before running
...
them through the quirk table.
2000-01-26 16:51:11 +00:00
063cb5e5dc
Additional hackery for the Cobalt interfaces. Even though these are
...
pass 4.1 21143s, they have a 128-byte SROM, and thus use a different
SROM address size than all other pass 4.1 21143s.
A plea to hardware designers -- *please* read application notes for
the components you're using before putting your hardware together. Thanks.
2000-01-26 15:50:52 +00:00
639bd74d21
Pccbb manages interrupt handlers by itself for its child device.
2000-01-26 09:02:41 +00:00
4656f0ba52
Remove the FreeBSD support from this file. It hasn't worked in FreeBSD
...
for some time, and only made the code harder to read.
2000-01-26 06:41:11 +00:00
494b4a9ed3
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 06:27:32 +00:00
8949eab0cb
Split the code that reads the SEEPROM into its own file.
2000-01-26 06:04:37 +00:00
2bd8866643
"i/o" -> "memory"
2000-01-25 23:23:48 +00:00
7360584deb
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
(XXX is the hack still necessary?)
2000-01-25 22:31:06 +00:00
4f1e715248
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
2000-01-25 22:30:04 +00:00
6dc0e3435d
IFM_1000_FX -> IFM_1000_SX
2000-01-25 20:19:14 +00:00
02af3f45b6
Clean up the SROM addrbits code a little.
2000-01-25 19:53:34 +00:00
6aca67041c
Add a chip type for the Xircom X3201-3, and centralize the declaration
...
of the chip names array.
2000-01-25 19:29:17 +00:00
492bfe70f3
get the device name from pcidevs instead of having a list here
2000-01-25 14:34:24 +00:00
73ce2abd33
Make sure PIRQD enable bit is set. From FreeBSD.
2000-01-25 11:26:06 +00:00
dccf05f858
Do pccbb_chipinit() after YENTA register space allocation.
...
Add TI PCI 1451 PCI-CardBus entry.
2000-01-25 09:36:43 +00:00
f18e32d670
Regen.
2000-01-25 09:06:50 +00:00
7b4d7aaba1
Add TI PCI 1451 PCI-CardBus bridge.
2000-01-25 09:04:03 +00:00
b50b01e020
Don't enable the interrupt until after we cycle the power, disable
...
interrupt at disable, and make this code look more like the std pcic
code. From Mycroft and I.
2000-01-25 06:16:34 +00:00
c4d8a60bac
Handle Cobalt Networks interfaces, which are 21143 pass 4.1 devices
...
with a simple (MAC address only) SROM format.
From Soren S. Jorvang <soren@wheel.dk>
2000-01-25 03:23:56 +00:00
7ac1ad97ba
The TI 2030 is a PCI-PCI bridge and doesn't belong here
2000-01-24 15:51:59 +00:00
4b45d02e15
regen
2000-01-24 15:50:16 +00:00
a8308ddfd4
TI PCI2030 is a PCI-PCI bridge
2000-01-24 15:49:50 +00:00
1ef6ee50b9
Regen.
2000-01-23 09:55:40 +00:00
9aa167f517
Add Apple KeyLargo and UniNorth.
2000-01-23 09:54:28 +00:00
901082bf1e
Remove code that should not have been added.
2000-01-23 04:02:19 +00:00
75e8c400fa
Add parens so a ?: expression binds correctly.
2000-01-23 00:10:03 +00:00
dc59bc1db3
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:39:55 +00:00
e716b4ba71
Fix register offset problem. This should make EISA boards work correctly,
...
and is also needed for the ISA frontend (some time this week).
2000-01-18 16:50:38 +00:00
0016706a70
Clean up revision stuff for the sis. Suggested by Chris Cappuccio.
2000-01-18 13:58:07 +00:00
a569e4a38f
Correct URLs.
2000-01-18 13:30:32 +00:00
762741c71d
Fix the size of the playback buffer. Patch from Dave Sainty <dave@dtsp.co.nz>.
2000-01-18 04:48:47 +00:00
2367ad5f3d
add shutdown hook
2000-01-17 12:57:26 +00:00
9156026f0f
From chris@openbsd.org:
...
"Don't enable UDMA modes for revisions of SiS 5513 < 0xd0
The only revisions I know which don't actually support UDMA are 0x09 and below..
But the only revision I know which does support UDMA is 0xd0 (and presumably
above that)"
2000-01-16 21:31:28 +00:00
a9e57ac54d
Fixes for 21143 and MII in full-duplex mode.
2000-01-15 18:39:31 +00:00
a30f6c8ad9
Apply patches from Tatoku Ogaito (the author of the code).
2000-01-14 14:39:13 +00:00
7fcb8a3a8c
minor cosmetic
2000-01-14 13:20:17 +00:00
1ee1632a02
Remove EX_CONF_MII for the 3c980. At least 2 people need this for the card
...
to work.
2000-01-13 23:26:35 +00:00
87414deb1e
remove stale comment
2000-01-13 09:05:41 +00:00
8430609055
(pccbb_pcmcia_do_mem_map): handle 8-bit memory
2000-01-13 09:01:17 +00:00
e8937eb4e5
make this slightly more inline with other code; and while at it, fix
...
some oddities in pccbb_winset
2000-01-13 08:54:20 +00:00
69034619d0
add %b strings for sockevent and sockstate registers
2000-01-13 08:46:46 +00:00
27214a2c93
Add an entry for Toshiba ToPIC100 CardBus-PCI bridge.
...
Maintainance for 3Com multi-function, 16-bit pcmcia card.
2000-01-12 09:23:26 +00:00
d978274ade
Regen.
2000-01-12 09:11:42 +00:00
6a0979928c
Add an entry for Toshiba ToPIC100 CardBus-PCI bridge.
2000-01-12 09:08:36 +00:00
3a0141108b
Regen.
2000-01-11 17:21:02 +00:00
d8c0efec1b
Add CompuModules DVB receiver and transmitter boards.
2000-01-11 17:20:24 +00:00
18bb5846c7
Regen.
2000-01-09 09:20:01 +00:00
2c073c654d
Add MPC105.
2000-01-09 09:19:26 +00:00
8f3fd0d6b3
Spelling.
2000-01-05 16:28:39 +00:00
6f64d1e85f
regen
2000-01-05 11:32:43 +00:00
2abcb85b5f
add some stuff which was mentioned on the mailing lists recently
2000-01-05 11:32:06 +00:00
a4d9bd9484
Add support for setting the clock and adapt the code to the new more
...
generic ic/hd56470.c core which now supports the isa version of the
same card.
2000-01-04 06:31:39 +00:00
e9e9f381a1
Add an entry for the Trident Microsystems CYBER 9525
...
(as found in an Toshiba Satellite 2650 XDVD).
1999-12-31 00:12:41 +00:00
ac50ee0e91
Add an entry for the Trident Microsystems CYBER 9525
...
(as found in an Toshiba Satellite 2650 XDVD).
1999-12-30 23:53:42 +00:00
1e9bb239a3
Off-by-one error in limiting the DMAC buffer size for Audio 2 to 64K (actually
...
64K - 1); from Dave Sainty in PR kern/9064.
1999-12-28 19:26:26 +00:00
f6655d0f7e
Fix a buffer KVA comparison botch in eso_mappage(); from Dave Sainty in
...
PR kern/9062.
1999-12-28 01:39:38 +00:00
841d4966c3
Lower-case Bus-Master for consistency.
1999-12-26 21:46:23 +00:00
f1a6ac445d
Use htole32() and le32toh() instead of SCR_BO().
...
XXX Should we still keep non-NetBSD part?
1999-12-26 10:41:22 +00:00
35a9d47da9
Maintanance for Ricoh RL5C475. VAIO 505TX uses this chip.
1999-12-20 08:11:42 +00:00
2f3ba68db9
Add more SCR_BO(). NCR53c875 now works on macppc.
...
XXX All SCR_BO() macros should be replaced with htole32() or le32toh().
1999-12-20 03:37:06 +00:00
be6fe10ee6
get back to looking at config flags
1999-12-20 00:33:17 +00:00
7374a44f77
Use bswap32() as SCR_BO() macro to avoid unexpected side effects.
...
SCR_BO(*src++) caused some trouble.
1999-12-18 07:57:03 +00:00
5257d9712e
regen
1999-12-17 17:19:11 +00:00
289c969284
add Intel 450NX stuff
1999-12-17 17:18:48 +00:00
b7b9264da6
Regen.
1999-12-17 14:00:12 +00:00
78ba345df3
Change the Galileo entries so the generated code can be compiled.
1999-12-17 13:59:44 +00:00
3017275313
Regen.
1999-12-17 01:04:47 +00:00
fd4557865d
Fix comment.
1999-12-17 01:04:29 +00:00
bf75bd8856
Regen.
1999-12-17 01:03:45 +00:00
fdab32f446
Add Galileo Technology system controllers.
...
Remove obsolete ID database URL.
1999-12-17 01:02:03 +00:00
edf809c8b6
Dual LVD (1280) support.
1999-12-16 05:35:42 +00:00
5dc4b19d4d
Report the Capability List support bit of the SR and, if set, print the
...
the Capability list pointer register as such as well as the capabilities
implemented in the list.
1999-12-15 12:27:26 +00:00
6a318fe223
Regen.
1999-12-15 11:55:35 +00:00
eec28e9605
* Add ESS Maestro2 product ID.
...
* Add TerraTec vendor ID.
1999-12-15 11:52:55 +00:00
3c1b8138f7
Add a device driver for the Cirrus Logic CS4280 sound chip.
...
The code has been contributed by Tatoku Ogaito.
1999-12-13 20:19:23 +00:00
821c7a01f8
As suggested by Jason Thorpe back out revision 1.27 because it broke
...
PHY probing for the ThunderLan driver.
1999-12-12 17:55:21 +00:00
014cd3fcc1
Take a stab at making this work on big-endian systems.
1999-12-12 17:46:36 +00:00
afbb07a0e5
Use htole32() and le32toh().
1999-12-12 02:53:56 +00:00
3716f21b7e
Use htole32().
1999-12-12 02:50:40 +00:00
caae0e1aa1
- Don't try to run the chip in big-endian mode. Not all chips support
...
this consistently, and it doesn't always work even when the chip
supports it.
- Make sure things DMA'd to the chip that the chip interprets are in
little-endian mode.
1999-12-11 00:32:59 +00:00
c88b5146dc
Add support code to have the Hardware Volume Control interact with the
...
software mixer Master Volume state in a defined way by lazily updating the
latter if input from the former was processed.
1999-12-10 19:13:00 +00:00
6d1d09f757
Add a symbolic name for the ES1946 rev. E in this place, too.
1999-12-10 16:50:52 +00:00
546480874c
After reading the 21143 manual again, make sure SNOOZE is cleared in
...
the CFDA register, too.
1999-12-07 07:36:19 +00:00
747d454ffe
Add the PMCSR offset for the 21143, and make sure to bring the 21142
...
and 21143 out of sleep mode. From Masanori Kanaoka.
1999-12-07 07:32:58 +00:00
f773270d0d
If, on the 21143, we find that we don't have an ISV SROM, try reading
...
it again, with 8 address bits. 21143 Pass 4.1 has a larger SROM,
for storing the CIS when used in a CardBus application.
1999-12-07 07:20:17 +00:00
0893832078
update for changed struct wsdisplay_accessops:show_screen signature.
...
no functional changes
1999-12-06 19:25:56 +00:00
9eea13a674
Mark exactly 3 uses of the SCR_BO() macro as being bogus; these 3 uses
...
already involve byte swapping on big-endian systems due to bus_space_*().
However, the use is self-consistent, and the value is not interpreted
by the chip, so it probably does not matter. Leave them in for now; we
can always look at their removal later.
1999-12-05 19:40:18 +00:00
8c1cbdbed5
Slight change to previous, to make it more obvious as to what's going on.
1999-12-05 19:33:13 +00:00
d06db4b7da
I have the feeling that OpenBSD has never tried the 53c825a, 53c875, 53c875j,
...
53c885, 53c895, or 53c896 on big-endian systems.
1999-12-05 18:40:46 +00:00
389c599f35
Changes from the OpenBSD `ncr' driver to byte-swap the script on big-endian
...
systems. Should make this go on e.g. the Apple Network Server.
1999-12-05 18:25:18 +00:00
6aabd4d0c2
CL* discarding.
1999-12-04 12:11:13 +00:00
b8a6774e36
Add support for Lava Computers MFG 2sp-pci and quattro cards.
1999-12-04 05:43:44 +00:00
165dc789fb
Regen
1999-12-04 05:43:02 +00:00
fce37d6113
Add vendor ID for Lava Semiconductor ( http://www.lavalink.com )
1999-12-04 05:41:08 +00:00
111b1dc2ee
Regen.
1999-12-04 04:41:40 +00:00
ddbe03436b
Add some of the Compaq RAID controller IDs.
1999-12-04 04:40:57 +00:00
e5835e36c3
request/response queues now indexed via u_int16_t. Add back in f/w inclusion
...
and clean up it's compilation. get chip rev out of pci header.
1999-12-04 02:54:54 +00:00
eab9ce05b7
A PCI Revision ID of 0x02 is what ESS happens to be calling ES1946 Revision E.
1999-12-03 22:34:28 +00:00
229f631a84
regen
1999-12-01 15:08:17 +00:00
1657f687be
add Cyclades 4Y and 8Y
1999-12-01 15:07:44 +00:00
a7ee57948b
-support 3c905B-COMBO - somewhat preliminary: the chip has both an internal
...
MII PHY capable of NWAY (according to the Linux driver) and plain BNC/
transceiver connectors. The shared code can't handle this yet, so leave
out MII/NWAY for now.
-print out revision number from PCI config header, this has been useful to
identify buggy chips
1999-11-30 19:16:51 +00:00
9faac4111e
regen
1999-11-30 19:10:38 +00:00
b5db34e4d5
add 3c905B-COMBO
1999-11-30 19:09:54 +00:00
0c3ecf8e5e
Improve Ultra/66 support now that I've got some docs from Promise.
1999-11-28 20:05:18 +00:00
7b92ed07bd
Propagate the USB revision number to the usb driver.
1999-11-20 00:57:08 +00:00
7479d29f00
Make the ThunderLAN and VIA Rhine drivers use the common MII bit-bang module.
1999-11-19 18:27:18 +00:00
9ed17102f4
- Use the common MII bit-bang module.
...
- Add support other than 128-byte SROMs.
- Add support for the 21142/21143 MII.
1999-11-19 18:22:42 +00:00
ef8e85f177
Regen.
1999-11-17 00:09:48 +00:00
62058f9f6b
Add the SBLive! joystick device.
1999-11-17 00:09:17 +00:00
cgd