jmmv
42390b383a
Install both netbsd and netbsd.aout into / when running a "make install" in
...
the kernel's compilation directory.
Fixes PR port-shark/17569.
2007-03-12 15:09:35 +00:00
jmmv
465d2fa6dc
Add the ability for platform-specific Makefiles to indicate which kernel
...
images to install into / (which might be more than just "netbsd").
Addresses PR port-shark/17569.
2007-03-12 15:09:01 +00:00
jmmv
af7d74f692
If running the installer from a serial console, ask the user for the
...
appropriate TERM value. Otherwise use 'pc3' for local consoles (pccons
or wscons). Based on code from hp300, although that port asks the user
unconditionally.
Fixes PR port-shark/18355.
2007-03-12 14:47:15 +00:00
liamjfoy
41fd192693
ip6.maxflows default value is 256 - document
2007-03-12 14:37:28 +00:00
liamjfoy
8c4318e7ce
GATEWAY also builds IPv6 Fast Forwarding
2007-03-12 14:35:22 +00:00
kiyohara
4ecba574db
Not KAUTH_DEVICE_TTY_OPEN but KAUTH_GENERIC_ISSUSER is used.
2007-03-12 14:12:13 +00:00
tsutsui
0b5d7fc8ba
IRL line connected to each device on sysasic is not always corresponding
...
with MI IPL_* definitions, so add an independent arg to pass IRL lines
to sysasic_intr_establish() and use appropriate macro for them.
2007-03-12 14:03:47 +00:00
mjf
0fa0fcc9ed
mbe(4) also works on the g2bus on the dreamcast.
...
Closes PR/35974.
2007-03-12 13:55:24 +00:00
rmind
1e26039813
yamt-idlelwp: updated base
2007-03-12 13:13:19 +00:00
skrll
f99245a3c5
Correct the struct name for PT_LWPINFO
2007-03-12 12:50:42 +00:00
tsutsui
2ab13d3a78
Use vaddr_t casts rather than pointer arithmetic (in #ifdef DIAGNOSTIC).
2007-03-12 12:09:34 +00:00
tsutsui
736b47b76e
Fix printf formats in #ifdef DEBUG.
2007-03-12 12:03:18 +00:00
jmmv
4233342b6f
Clear the first sector of the disk so that OpenFirmware recognizes it and
...
can load a kernel from its file system.
Also tell the user what command he needs to run from the OpenFirmware shell
to configure automatic booting of the system.
Closes PR port-shark/35576.
2007-03-12 11:19:37 +00:00
kiyohara
b02917f2f9
Oops...
...
bruartd works as foreground mode when '-d' option is specified.
2007-03-12 08:10:31 +00:00
kiyohara
14b6387020
Remove '*' in argument [-t type], that causes confusion.
2007-03-12 08:01:38 +00:00
enami
1e59139e04
Make -DINTREE (a flag to tell make(1) to build the test program
...
with using in tree humanize_number.c) works again.
2007-03-12 03:39:57 +00:00
enami
1a453a687f
Add failure case reported by Greg Troxel.
2007-03-12 03:38:21 +00:00
thorpej
8f326e8290
- Define LOCK_CAS_CHECK() in m68k/frame.h (there because it operates on
...
a clockframe).
- Call LOCK_CAS_CHECK() in clock_intr() (noted by Izumi Tsutsui).
2007-03-12 02:51:03 +00:00
matt
b3cd0abcf6
Shrink VAX kmutex from 12 bytes to 8. Fix various LOCKDEBUG/DIAGNOSTIC
...
problems.
2007-03-12 02:22:43 +00:00
matt
0b7ea235a3
Fix softintrs (boolean test problem). Spotted by mhitch.
2007-03-12 02:21:22 +00:00
matt
57257364a0
Define/use MUTEX_COUNT_BIAS for those implementations that need one (like
...
vax).
2007-03-12 02:19:14 +00:00
uwe
11957bf405
Note in that TAS.B in inline asm clobbers "cc".
...
Use MOVT instead of clear+rotate with carry in __cpu_simple_lock_try.
2007-03-12 01:33:50 +00:00
uwe
d96c2a32bc
Use simple mutexes. This file is effectively a copy of arm's one now.
2007-03-12 00:57:13 +00:00
uwe
7983f30ad7
Do cpu_exit with proper locking.
...
Rename assembly cpu_exit to cpu_do_exit and make a C version of
cpu_exit() to do proper locking. While here, g/c switch_exit entry
point and don't call lwp_exit2 from cpu_exit.
From ad@
Completes PR port-sh3/35971 - my Jornada now boots to multiuser with a
LOCKDEBUG kernel.
2007-03-12 00:32:56 +00:00
uwe
f3c67932b4
Cosmetic. Group function declarations and variable definitions.
2007-03-12 00:12:29 +00:00
uwe
c24277d5f4
Factor out code to save processor state to pcb->pcb_sf switchframe
...
into a macro. While here, clarify l->l_md.md_pcb->pcb_sf
vs. l->l_md.md_pcb confusion with proper naming and some comments.
Idea from OpenBSD.
2007-03-11 23:54:03 +00:00
ad
a3128f66df
Adjust previous: move the release of specificdata after the very last
...
file system operation.
2007-03-11 23:40:58 +00:00
ad
1bf149ba4c
exit1: destroy the proc/lwp specificdata after calling uvm_proc_exit, as
...
file systems can still be using it.
2007-03-11 23:19:49 +00:00
christos
31b5ea99cb
fix missing initializers.
2007-03-11 22:25:48 +00:00
ad
5941740892
Remove a use of lockmgr/LOCK_INITIALIZER.
2007-03-11 22:16:32 +00:00
ad
2dc89bb0bd
Remove #include <machine/vmparam.h>.
2007-03-11 22:11:02 +00:00
ad
0b43c20288
Remove useless cast.
2007-03-11 22:07:32 +00:00
xtraeme
25b63d499e
Forgot to bump year too.
2007-03-11 22:03:09 +00:00
xtraeme
2fdb9c6dc1
Mention new supported chips, bump date.
2007-03-11 21:59:09 +00:00
ad
f96f2e2a7f
Add the LWP's runtime to kinfo_lwp.
2007-03-11 21:38:38 +00:00
ad
9a92ddadc8
Put back mtsleep() temporarily. Converting everything over to condvars
...
at once will take too much time..
2007-03-11 21:36:48 +00:00
xtraeme
f8fabb9a9e
Explicitly initialize lm_sensor->rfact for every sensor's chip.
2007-03-11 21:23:22 +00:00
rmind
fd58eec0ea
Sync scheduler with reality:
...
- Separation of context switching and thread scheduling
- Generic scheduler API for modular implementations
- New scheduler supporting
OK by matt@
2007-03-11 21:05:57 +00:00
ad
7a902dfca5
PR port-sh3/35971: Mutex error on SH3 DIAGNOSTIC kernels
2007-03-11 20:09:03 +00:00
dsl
6803111cb3
Fix amd64 build for compat sys_stat() changes.
...
This file isn't included in amd64:GENERIC
2007-03-11 19:36:37 +00:00
dsl
5959b4cbc7
Add a tentative definition for 'struct statvfs'.
2007-03-11 19:34:55 +00:00
apb
7c0e506d3c
Adapt to the new MAKEDEV interpretation of -M by passing -MM.
...
Also pass "-ppax" in an attempt to get improved performance,
but this doesn't really work in the typical case, because the
install ramdisk image contains a version of pax(1) that doesn't
support the -M flag. (MAKEDEV detects the failure and falls back
to using mknod(8) as usual.)
2007-03-11 19:02:04 +00:00
christos
b127b0cff4
more caddr_t lossage
2007-03-11 18:37:46 +00:00
he
881084c9ed
Well, as pointed out by is@ for the amiga port, the added indirection
...
is wrong. Restore previous behaviour, and add the now appropriate cast.
2007-03-11 17:39:02 +00:00
he
228e24a143
Correct a thinko of mine in the previous change, pointed out by
...
is@. Even though the argument type changes as an effect of the
caddr_t removal, there really is no need to indirect where we didn't
before. Instead, add the appropriate cast.
2007-03-11 17:34:37 +00:00
thorpej
62509c00e0
Actually store the new value in the RAS _lock_cas(). Noticed by Izumi Tsutsui.
2007-03-11 16:46:52 +00:00
apb
1f33f6e66f
Test whether pax works; if not, fall back to mknod.
...
This is intended for use on install media that might not have pax.
2007-03-11 16:08:11 +00:00
apb
b76e2d3d5a
Document lack of support for -M and -p flags.
2007-03-11 15:54:54 +00:00
apb
76426884d4
Document "-p pax" and "-M -M".
2007-03-11 15:54:10 +00:00
apb
f5b5e05c27
* Add "-p pax" flag, to create all device nodes at once using pax,
...
instead of one by one using mknod. This is much faster (speed
increases of up to 20 times have been observed, but 3 to 5 times is
more common).
* One "-M" flag will create the mfs file system but not redirect output
to a temporary console; "-M -M" will also redirect output.
* Change the way we accumulate options to pass to MAKEDEV.local.
2007-03-11 15:52:30 +00:00