"Add support for Realtek ALC883. This is the "value" edition of the
ALC882, and differs only by lacking an ADC and a mixer, so have it use
ALC882's get_port(), set_port() and a slightly modified version of its
mixer init."
- Allow callers to try and release an unheld rwlock. Just return EPERM
as mandated by IEEE Std 1003.1.
- Use pthread__atomic_swap_ptr() to set in the new lock value. At this
point the lock word can't have changed.
pthread__rwlock_wrlock, pthread__rwlock_rdlock:
- Mask out the waiter bits in the lock word before checking to see if
the current thread is about to lock against itself.
file system safe, but less performant as the kernel, as it syncs
*all* outstanding dirty buffers. However, we don't have much choice
in userspace currently.
MHz value as suggested by Alan Barret (apb@).
While I'm here make it report the correct type, it should be PC2 not PC
for DDR2.
spdmem0 at iic0 addr 0x50
spdmem0: DDR2 SDRAM memory, no parity or ECC, 1024MB, 800MHz, PC2-6400
spdmem0: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 2.50ns cycle time
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: DDR2 SDRAM memory, no parity or ECC, 1024MB, 667MHz, PC2-5300
spdmem1: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time
spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
http://www.ludd.ltu.se/~ragge/pcc/
This is based on the original Portable C Compiler by S. C. Johnson,
written in the late 70's. Even though much of the compiler has been
rewritten, some of the basics still remain.
The goal of pcc is to produce a small, simple, fast and understandable
C99 compiler under a BSD licence.
(for booth the tool build and mknative). gcc's "config.gcc" sets
it if the target is netbsd[2-9], but since the target is w/o version
number in our builds, it has no effect. Found by Nick Hudson,
patch approved by mrg.
defined by the C library for the various m68k ports by borrowing
some #ifs from the i386 port.
Also, align sun2 with the other m68k ports as to whether they
define __bswap{16,32} or bswap{16,32} in their C library (all
now define the __ variants).
This should make the m68k ports build sys/rump again, except
for sun2 which hits another problem later on.
