* If -pthread is specified, add -lpthread and -D_PTHREADS.
More thread support to come; this is just a start (sigh, it's
handled so much nicer in 3.3...).
file name rather than relying upon "$@", since the latter might be the
path to an older version of the "stamp" file located in (possibly read-only)
source.
Fixes an annoying-to-debug build problem I hit in tools/texinfo...
- add '-D ${DESTDIR}' to INSTPRIV, so install(8) removes the leading
${DESTDIR} from the metalogged path
- provide ${METADB.add} variable (for "${CAT} -l >> ${METALOG}"), to make
it easier to replace manual metalog manipulation in the future.
- with manual metalog additions, don't add the leading ${DESTDIR} in the path
- in maketars, use "mtree -C ..." instead of
"mtree -D ... | sed -e 's,\(.*\) \(\..*\),\2 \1,";
Benefits:
- maketars "Parsing METALOG" step speeds up from 29 seconds to 1.2 seconds
on a P3-600.
(This also benefits "make installworld" at the top level.)
- ${DESTDIR}/METALOG is easier to read without the leading "${DESTDIR}"
on all the pathnames, and it's smaller as well.
Background:
Originally, the EH labels were placed on the permanent obstack, which
could end up using a lot of memory (for heavy inlining) since inlined
labels also needed to be permanent as a result of this.
This was changed in
Wed Dec 9 09:12:40 1998 Andrew MacLeod <amacleod@cygnus.com>
* except.h (struct handler_info): Add handler_number field.
* except.c (gen_exception_label): EH labels no longer need to be
on the permanent obstack.
(get_new_handler): Set the label number field.
(output_exception_table_entry): Regenerate handler label reference
from the label number field.
(init_eh): Remove a blank line.
* integrate.c (get_label_from_map): Labels no longer need to be
on the permanent obstack.
by using the label numbers instead of the label structures in most cases.
The operative word here is "most" cases. Addresses to the EH RTX was still
used in (at least) flow.c, that now used freed memory. Oops.
For this to happen, the freed address of the RTX representing a EH label
must be reused for a new label that is located in dead code. delete_block()
will then see that this RTX is mentioned in the EH table, and (incorrectly)
remove the exception handler.
This might be seen when, for example, compiling
src/gnu/dist/groff/src/roff/troff/node.cc for m68k.
sections with .text if the following 3 conditions are true:
1. Section has file contents and is read-only.
2. The VMA of the section is after the end of .text and before
the start of .data.
3. The image is demand-pageable (otherwise, a_text in the header
will not reflect the gap between .text and .data).
Fixes PR 19164.
* If -mhard-float is passed to the compiler, pass -mfpa10 to the assembler.
* If -msoft-float is passed to the compiler, pass -mfpu=softvfp to the
assembler.
* If neither -mhard-float nor -msoft-float are passed to the compiler,
pass -mfpu=softvfp to the assembler.
These changes properly mark objects as using soft-VFP, as is the default
code generation for NetBSD ARM ELF.
* FPU_MEMMULTI -- only include the FPU_FPA10 bit.
* FPU_ARCH_VFP -- define, meaning "uses VFP-format layout".
* FPU_FPA -- define short-hand for (FPU_CORE|FPU_FPA10).
* FPU_DEFAULT -- FPU_ALL -> FPU_FPA.
* Floating point instructions -- FPU_ALL -> FPU_FPA.
* Also set F_SOFT_FLOAT if FPU_ARCH_VFP.
* Set F_VFP_FLOAT if FPU_ARCH_VFP.
* md_atof: lay out bytes properly if using VFP.
* Accept -mfpu=softvfp.
* For -mall, set the FPU part of cpu_variant to FPU_FPA, instead of
FPU_ALL.
C-referenceable names, i.e. "link sets") that happens with explicit
LMAs in the linker script:
* As orphans are sorted after sections, the effective
size of the section is changed. Record a size ajustment
for each orphan that is sorted after the section.
...and for sections which have an explicit load address expression:
* The first time an orphan is sorted after a section,
copy the load_base expression to the orphan, adding
the _unadjusted_ size of the parent section. We need
to use the unadjusted size because by the time the
expression can be folded, all of the orphan size
adjustments will have accumulated, resulting in misplacing
the orphan.
* For each subsequent orphan sorted after a section,
set the load_base of the orphan to the load address
of the previous orphan plus the size of the previous
orphan (actually, the unadjusted size, but for orphans,
size and unadjusted size are always equal).
function to include crti.o/crtn.o in the STARTFILE and ENDFILE
specs, respectively.
Corresponding GCC ChangeLog entry:
2002-11-19 Jason Thorpe <thorpej@wasabisystems.com>
* gcc.c (The Specs Language): Document spec functions.
(static_spec_functions, lookup_spec_function)
(eval_spec_function, handle_spec_function)
(if_exists_spec_function, alloc_args): New.
(execute): Abort if processing_spec_function is true.
(do_spec_1): Hand off spec to handle_spec_function if %:
is encountered. If processing_spec_function is true,
end any pending argument when the end of the string is reached.
(main): Use alloc_args to allocate the initial argument vector.
* gcc.h (struct spec_function): New.
(lang_specific_spec_functions): New extern.
* config/netbsd-elf.h (STARTFILE_SPEC): Add if-exists(crti%O%s).
(ENDFILE_SPEC): Add if-exists(crtn%O%s).
* config/alpha/netbsd.h (ENDFILE_SPEC): Likewise.
unless one of the following flags are passed to the compiler:
-mno-abicalls
-fno-pic
-fno-PIC
Based on the following change in gcc-current:
2002-09-22 Jason Thorpe <thorpej@wasabisystems.com>
* config/mips/netbsd.h (SUBTARGET_ASM_SPEC): Always pass -KPIC
unless -fno-pic or -fno-PIC is specified.
The -mno-abicalls handling is new to this patch, and will be checked
into gcc-current shortly.
2002-09-28 Matt Thomas <matt@3am-software.com>
Jason Thorpe <thorpej@wasabisystems.com>
* config/tc-vax.c (md_estimate_size_before_relax): Only try to
convert undefined references to GOT32/PLT32 if PIC code is
requested. Fix comment.
with bfd_elf_set_dt_needed_soname(). Fixes the "NEEDED crtend.o"
problem reported on tech-toolchain/current-users.
Problem spotted by Ryo HAYASAKA <ryoh@jaist.ac.jp>.
<string>" message if the stars were aligned incorrectly due to fast-and-
loose list handling.
The list handling code didn't discriminate between list nodes and list
heads, resulting in string comparisons using memory in the "list heads
by length" array as the target of the comparison; if the string being
handled was short enough and the pointers present in the list heads
array were just the right form the tool would get spurious matches and
exit with the above message.
PR toolchain/18858
change INITIALIZE_TRAMPOLINE() to use it, and apply the following
patch to it (which I have already submitted to GCC 3.3):
* config/i386/i386.c (x86_initialize_trampoline): Emit a call
to __enable_execute_stack with the address of the trampoline
if TRANSFER_FROM_TRAMPOLINE is defined.
Define a TRANSFER_FROM_TRAMPOLINE suitable for NetBSD targets, to enable
stack execution on target machines which can separate exec permissions for
a region:
* config/netbsd.h (NETBSD_ENABLE_EXECUTE_STACK): Define.
* config/alpha/netbsd.h (TRANSFER_FROM_TRAMPOLINE): Define
as NETBSD_ENABLE_EXECUTE_STACK.
* config/i386/netbsd-elf.h (TRANSFER_FROM_TRAMPOLINE): Ditto.
* config/i386/netbsd.h (TRANSFER_FROM_TRAMPOLINE): Ditto.
* config/sparc/netbsd-elf-common.h (TRANSFER_FROM_TRAMPOLINE): Ditto.
* config/sparc/netbsd.h (TRANSFER_FROM_TRAMPOLINE): Ditto.
(A similar patch will be submitted to GCC 3.3.)
2002-10-17 Jason Thorpe <thorpej@wasabisystems.com>
* config/alpha/alpha.c (alpha_initialize_trampoline): Use
tramp, not addr, to pass the trampoline address to
__enable_execute_stack.
Otherwise, incorrect behavior would result if the trampoline happend
to stradle a page boundary.
anything includes <fnmatch.h>. Using our native /usr/include/fnmatch.h is
no good idea, they are incompatible.
XXX - why is tar using it's own implementation?
I'm not sure this is the right way to handle the problem, but it made
a "make cleandir && make" here possible again.
we saved the GOT pointer register.
Note: This is already fixed in the GCC 3 sources, but GCC 3 uses a different
condition to determine whether to save and restore the register, so the patch
cannot be the same.
large functions for ARMv4):
Fri Nov 12 13:31:54 1999 Bernd Schmidt <bernds@cygnus.co.uk>
* config/arm/arm.h (LEGITIMIZE_RELOAD_ADDRESS): Treat QImode
addresses the same way GO_IF_LEGITIMATE_INDEX does.
two variables:
TOOLCHAIN_MISSING -- set to "yes" on platforms for which there is
no working in-tree toolchain (hppa, ns32k, sh5, x86_64).
EXTERNAL_TOOLCHAIN -- if defined by the user, points to the root of
an external toolchain (e.g. /usr/local/gnu). This enables the cross-build
framework even for TOOLCHAIN_MISSING platforms.
If TOOLCHAIN_MISSING is set to "yes", MKGDB, MKBFD, and MKGCC are all
unconditionally set to "no", since the bits are not there to build.
If EXTERNAL_TOOLCHAIN is set, MKGCC is unconditionally set to "no",
since the external toolchain's compiler is not in-sync with the
in-tree compiler support components (e.g. libgcc).
* Set MACHINE_CPU much earlier in bsd.own.mk, so that more tests in
that file can use it.
local_got_offset cruft that's was still there. Change the way
got_entries were assigned. Now do it in elf_vax_size_dynamic_sections.
Add a routine elf_vax_instantiate_got_entries which assigns space in
the GOT or changes to normal PC32 references for static or symbolic links.
* Rename TARGET_ATPCS_STACK_ALIGN to TARGET_ATPCS.
* Move APTCS aggregate return rules to arm_return_in_memory(), conditional
on TARGET_ATPCS, and make it also return true for variable-sized aggregates.
be changed in the future to "yes".
If MKDYNAMICROOT == "no", there is no change from existing behaviour
of a static /bin and /sbin (and a few programs in elsewhere).
If MKDYNAMICROOT == "yes", the following changes occur:
in <bsd.own.mk>:
SHLIBDIR?= /lib
SHLINKDIR?= /lib
in various Makefiles, the following entry is DISABLED.
LDSTATIC?=-static
This results in all programs (except those "standalone" programs built
in sys/arch/*/stand) are linked dynamically, the shared linker is moved
from /usr/libexec to /lib (with a compat symlink), and the shared
libraries used by /bin and /sbin programs are moved from /usr/lib to
/lib (with compat symlinks).
* Declare arm_arch5 and arm_arch5e. Set arm_arch5 for if -mcpu=arm10tdmi,
-mcpu=arm1020t, -mcpu=xscale, -march=armv5, -march=armv5e, -march=armv5te.
Set arm_arch5e for -mcpu=xscale, -march=armv5e, -march=armv5te.
arm.md:
* Define the "clz" insn for arm_arch5.
* Define an "ffssi2" expander for arm_arch5 which uses "clz".
The GCC ChangeLog does not have a complete description to quote here,
so:
arm.c:
* arm_override_options(): Set arm_is_scale according to the the
-mcpu=xscale option. Set arm_constant_limit to 2 if arm_is_xscale.
* arm_adjust_cost(): If arm_is_xscale, account for stalls that can
occur due to shifted operands.
* arm_gen_load_multiple(): Account for the cost of ldm vs. ldr if
arm_is_xscale.
* arm_gen_store_multiple(): Likewise for stm vs. str.
arm.h:
* CONSTANT_ALIGNMENT(): Use a constant alignment factor of 2 if
arm_is_xscale.
* MOVE_RATIO: Set to 4 if arm_is_xscale.
arm.md:
* Add XScale scheduling parameters.
* Define a "shift" attribute (used by arm_adjust_cost()) and give it
to the appropriate operands on andsi_not_shiftsi_si, *shiftsi3,
*shiftsi3_compare0, *shiftsi3_compare0_scratch, *notsi_shiftsi,
*notsi_shiftsi_compare0, *not_shiftsi_compare0_scratch,
abssi2, *neg_abssi2, extendsidi2, *cmpsi_shiftsi, *cmpsi_shiftsi_swp,
*cmpsi_neg_shiftsi, *arith_shiftsi, *arith_shiftsi_compare0,
*arith_shiftsi_compare0_scratch, *sub_shiftsi, *sub_shiftsi_compare0,
*sub_shiftsi_compare0_scratch, *if_shift_move, *if_move_shift,
and *if_shift_shift.
treated like -march=armv4t, but which generate __ARM_ARCH_5__,
__ARM_ARCH_5T__, and __ARM_ARCH_5TE__ defines, respecitively.
* Add -mcpu=xscale, which is internally treated like -mcpu=strongarm,
but which generates __ARM_ARCH_5TE__ and __XSCALE__ defines.
These command-line options and definitions are consistent with gcc 3.x,
and allow NetBSD Makefiles to use them in a forward-compatible way, and
also give hand-tuned source code (e.g. assembly) a chance of tuning for
XScale.
reasons:
1) There is already a destructor that does this. The atexit() is superfluous.
2) If libstdc++ is loaded dynamically by dlopen() and then is removed by
dlclose(), the pointer is no longer valid and the program would core dump
at exit() time. (This caused xmms to core dump at exit when xmms-sid was
installed, for example.)
to build full-feature libbfd, do the following:
- add "--enable-targets=all --enable-64-bit-bfd" to
src/tools/toolchain/Makefile configure arg
- invoke nbmake-<platform> native, to regenerate files under src/gnu
also comment out continuation lines. Fixes Linux->NetBSD
cross-gdb when built using NetBSD's make(1) (a'la build.sh -t).
toolchain/16713, Christian Limpach <chris@Pin.LU>.
Patch also submitted up-stream to GDB.
2002-02-07 Daniel Jacobowitz <drow@mvista.com>
* bfd-in.h: Update <stdbool.h> check to only see if <stdbool.h> has
been included, not drag it in.
* bfd-in2.h: Regenerate.
Fixes toolchain/16709, from Christian Limpach <chris@Pin.LU>.
wiz