a7e4d3ac4d
Add the Sbus front-end for the HME driver.
1999-06-27 12:47:52 +00:00
4f2e48c4d2
Don't turn on the engine too early.
...
Add and use QEDEBUG.
1999-06-24 19:59:14 +00:00
9335333dee
Issue a reset command when initializing.
1999-06-24 19:56:51 +00:00
67cbdf5623
split sbus audiocs code up so we can share it with the ebus. XXX ebus DMA is probably different.
1999-06-05 14:29:10 +00:00
61e5d73035
Fix bus_size_t/size_t/int confusion.
1999-05-27 14:22:28 +00:00
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
f5af676456
white space.
1999-05-16 14:47:52 +00:00
569836a986
It is no longer necessary to protect bus_dma_[un]load() at splbio, since
...
sparc bus_dma*() functions now protect their own internals..
1999-04-25 10:40:53 +00:00
52db3a158e
Correct QESTAT `%b' format string.
1999-04-20 20:24:39 +00:00
401d03761f
Initialize automatics in stp4020print(); noticed by Jonathan O'Brien.
1999-03-29 21:30:48 +00:00
5ecfcfbb96
Make `sun4m DMA not supported yet' message print only for this device,
...
rather than every sbus device probed.
1999-03-29 12:04:43 +00:00
d8aa229a12
roll internal release tag
1999-03-26 22:45:17 +00:00
3cafeadabd
Add support for the PTI SBS430. It's a FAS200 type chip- it's a bit funky
...
in that the registers aren't spread by a longword like all the other SBus/ESP
cards. Otherwise it's much the same. It'll make Brad Salai happy.
1999-03-26 06:48:40 +00:00
54ae4d24b8
Call bus_dma_[un]load() at splbio.
1999-03-23 00:38:15 +00:00
d86e93c62a
Fix promiscuous modes - patches from Jason Wright.
1999-03-23 00:27:09 +00:00
b71ea6aad4
Use correctly bus_space_*() macros to access device registers.
1999-03-19 02:32:48 +00:00
c312dfb410
prototype 1080/1240 support caused register offset rewhack
1999-03-17 06:17:16 +00:00
fbda6bed6d
make this compile on SUN4U. XXX icky, reader beware.
1999-03-09 00:42:20 +00:00
87ae97e3f0
Fix what is probably a past-o.
1999-02-28 17:01:49 +00:00
5c062abb64
Fix the bus print function.
1999-02-27 22:21:13 +00:00
331694119a
Our device name differs from the PROMs node name.
1999-02-27 13:17:08 +00:00
c6c74098d0
Don't try to use the MII routines for the internal PHY.
1999-02-19 14:57:00 +00:00
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
1a911bb798
roll internal release level
1999-02-09 00:54:07 +00:00
4553ce553c
use <dev/sbus/sbusvar.h> not <sparc/dev/sbusvar.h>
1999-02-03 06:03:37 +00:00
5c5ac2958f
roll internal release tag and finally use bus_space I/O
1999-01-30 07:10:38 +00:00
2fa7bdbccd
Fix AF_NS code.
1999-01-18 13:29:01 +00:00
fb846bde24
Share ring buffer code and data structure for `be' and `qe' in
...
the QEC module. Adapt the QEC interrupt establish code to suit the
needs of the `qe' device.
1999-01-17 20:47:50 +00:00
ad3176f350
Add `qe' network interface device.
1999-01-17 20:44:58 +00:00
5e8fcd9428
Import Jason Wright's Sbus Quad ethernet (`qe') driver as found in OpenBSD.
...
Heavily pounded on by me to make it fit our driver model.
Also added: auto media selection; shared ring buffer code with `be'.
1999-01-17 20:44:18 +00:00
6d1f55bc7a
Initial revision
1999-01-16 13:19:11 +00:00
c830c88dd2
Convert to bus_space(9).
...
Add buffer allocations needed by the be driver.
1999-01-16 12:46:08 +00:00
e0e761e420
Import Jason Wright's Bigmac driver, written for OpenBSD.
...
Heavily pounded on by me to make it fit our driver model.
1999-01-16 12:43:09 +00:00
a9b05361c1
Avoid arithmetic on void *.
1999-01-12 02:28:55 +00:00
e618c0c7d7
turn on SBUS bursts
1999-01-10 06:22:12 +00:00
d6cab14b00
clean up headers
1998-12-28 19:12:26 +00:00
bb12def997
Use `pcmciabus' to attach the Sbus to PCMCIA bridge.
1998-11-26 15:33:29 +00:00
2814b02ec8
Define STP4020 chipset driver by its nickname `nell'.
...
XXX - also define a `pcic' attribute here, so we can attach a pcmcia bus
1998-11-22 22:17:27 +00:00
5e4ad115c3
The beginnings of a driver for the Sbus <=> PCMCIA bridge chipset STP4020.
1998-11-22 22:14:35 +00:00
3b068a6c78
Adapt to the new scsipi_adapter interface.
1998-11-19 21:53:32 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
1338a7e982
hwreset(): delay required after diddling the medium selection bit.
1998-09-26 08:31:20 +00:00
ed652e2a09
Fix a silly yank-o.
1998-09-25 14:19:20 +00:00
6da4cd8aac
Make dma_sbus.c dependent on dma_sbus attribute.
1998-09-23 08:48:25 +00:00
f9e261c5e4
LSI63854 based parallel port driver skeleton.
1998-09-21 21:20:47 +00:00
fa25d48556
Add `bpp' device: the parallel port glued onto the LSI64854 DMA controller.
1998-09-21 21:02:23 +00:00
8fdc5aee4b
Make changes as required for new return values from dma setup routine
...
for isp. Unable to test in running kernel because they're not buildable today,
but should be okay.
1998-09-18 00:26:11 +00:00
cf10308f5f
bootpath check needs to keep checking for two formats.
1998-09-15 20:26:25 +00:00
8fec1fd696
add bustype tag to softc
1998-09-08 07:36:26 +00:00
pk