8a210e82b2
fix mixer goof on GUS max
1997-07-09 03:03:21 +00:00
2252d1317b
Add support for remote serial KGDB.
1997-07-05 20:52:40 +00:00
efde490942
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:20:44 +00:00
d152627095
Make this work again; the code to avoid attaching a 3c509 in P&P mode
...
didn't map in the port properly, and it was only luck that it worked
on anything at all.
1997-06-23 05:25:40 +00:00
5d4e140e53
Remove spurious line left over in previous commit.
1997-06-18 22:17:14 +00:00
f5bf0d3701
wdsize(): only call wdopen()/wdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:39:55 +00:00
09cad93ce8
Implement a better backpressure mechanism so that data is collected
...
in the driver's buffer if the tty buffer is full. If the driver's buffer
becomes full, turn off receive interrupts until it drains a bit.
1997-06-15 11:18:59 +00:00
47fab5e3ae
Make this compile again in light of recent changes to cdio.h
1997-06-14 08:55:14 +00:00
86ad297c12
Fix a braino in record source selection and a pasto in detecting
...
16 bit mode recording.
1997-06-13 19:21:59 +00:00
11e78a6b0d
Pull thorpej-bus-dma branch into mainline.
1997-06-06 23:43:45 +00:00
9d52c4bb31
4th arg to bus_space_{read,write}_multi_2() is a u_int16_t *, and should be
...
cast if it isn't. (These casts aren't necessarily safe, because of
alignment issues, but they allow the code to compile with prototyped versions
of bus_space_{read,write}_multi_2().)
1997-06-04 20:42:56 +00:00
5759a768d7
add software emulation stub for ulinear_be
1997-05-31 15:30:22 +00:00
9a7f1bfa84
Use single mode, not demand mode, for auto-initialize transfers.
1997-05-29 21:46:07 +00:00
8551fb607a
fix popping noises on 16-bit ulinear output.
...
add big-endian support
XXX ULINEAR_BE still needs ad1848 emulation on gusmax
1997-05-29 05:33:15 +00:00
1b429137ae
make Jazz16 16-bit output work properly again. Still hangs somewhere
...
(not yet diagnosed) on occasion in high-speed mode, but a ^C will exit
immediately--no 30-second drainage timeout.
1997-05-29 04:57:02 +00:00
e9028468cd
Don't use the TC bit to check for wraparound in isa_dmacount(); remember the
...
transfer length and use that.
1997-05-28 20:02:39 +00:00
1bd32f9cad
Add Alaw encoding emulation.
1997-05-28 00:07:46 +00:00
1616170859
A cosmetic name change.
1997-05-27 23:37:53 +00:00
6756ff7858
Minor corrections to previous. Notably, make recording work on SBPro again.
1997-05-26 16:13:59 +00:00
6bfd7b7d45
Remove unneeded call to comstop() in commsrint(). This fixes a problem
...
where the driver would sometimes retransmit bytes.
1997-05-26 14:54:46 +00:00
97c6a307e3
Where _is_ that brick when you need it?!
1997-05-24 03:45:40 +00:00
72b5ba3901
Redo the way selecting the mode for SB cards is done completely.
...
It is now table driven since there are so many different variations
of SB cards out there.
Also fix a bug that stopped SB2 and SBPro from working.
1997-05-23 21:19:59 +00:00
c612a6fca7
Check that setting IRQ and DRQ on SB16 actually succeeds.
1997-05-23 09:45:40 +00:00
1fd29f4172
Make the audio default parameters into a globally accessible constant.
1997-05-20 12:51:43 +00:00
0db08d11e6
Redo the SB mixer code. The driver can now distinguish between the
...
four different mixer options: none, CT1335, CT1345, and CT1745.
It should now be possible to access most of the SB16 functionality.
1997-05-19 23:14:29 +00:00
50a39a3334
Add NetBSD RCS IDs.
1997-05-18 06:08:02 +00:00
8d6f509439
Mask the level registers as the documentation suggests.
1997-05-18 00:36:03 +00:00
d7a82223f4
Change lowater calculation a little.
...
Fix mixer setting bug and add some missing splaudio().
Set SB drq16 to 5 and don't pretend to be SB v1.0.
1997-05-17 23:26:33 +00:00
d3844873e8
Mods for ESP406/FAS408 ISA SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:47 +00:00
7f4962f3f3
An ESP406/FAS408 ISA SCSI adapter driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:12 +00:00
abdd4ddbea
Back to pretending to be a SB v1.0 again, the mixer code for higher
...
versions is buggy.
1997-05-16 07:07:22 +00:00
37be371415
Clean up emulation code, SB, and GUS drivers and add some more encoding
...
emulation to SB.
1997-05-13 19:02:11 +00:00
877dcf7fc9
restore accidentally-lost set of nchannels in driver layer
1997-05-12 04:11:43 +00:00
9734adc67f
use normal linear names/values for 8-bit encodings
...
mark mulaw as emulated (it's done via a mapping table)
use GUS query encoding routine, even on GUS max, since the encoding
stuff is handled by the GF1.
XXX might not be right for recording, but it's correct for playback.
1997-05-10 18:58:33 +00:00
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
383d8e6f79
update sb_printsc() to match current reality.
1997-05-07 04:36:00 +00:00
8f6ec1a681
wds_find has the sense of its return value backwards (0 vs 1). This
...
caused the probe to succeed when there was no device present.
1997-05-01 20:10:57 +00:00
2fb1d088c5
XXX Pretend that all SB cards are of model 1.
...
XXX This way you can at least use SB cards until the real fixes go in.
1997-04-30 02:08:12 +00:00
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
bc66bb3e6e
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, remove the internal mbuf queue, which is not needed by this driver.
1997-04-28 18:30:20 +00:00
103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
b3192632db
On alpha, sizeof (long) != sizeof (int) and sizeof (int) != sizeof (ptr_t)
1997-04-28 15:52:44 +00:00
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
91a808523c
Fix typo in previous.
1997-04-24 08:05:13 +00:00
030c7010ee
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:04:33 +00:00
5cfcabc2fe
compile when __BROKEN_INDIRECT_CONFIG isn't defined.
1997-04-18 00:50:33 +00:00
f2746e9620
Update for new com driver.
1997-04-09 16:44:21 +00:00
73cfcd9f66
fix compile error if AUDIO_DEBUG
1997-04-06 17:21:45 +00:00
7dcb9bed4c
Make sure the bus tag is set where we need it.
1997-04-06 00:54:22 +00:00
jtk