e8d81bad46
Remove attribution for Gordon W. Ross and Leo Weppelman.
2009-10-22 20:31:24 +00:00
596e03f685
Remove soren@ and Onno van der Linden's acknowledgements.
2009-10-22 18:59:30 +00:00
a7f7ede450
Remove Todd C. Miller's acknowledgement.
2009-10-22 01:38:53 +00:00
5821fa1147
Remove acknowledgements for leo@ and thomas@.
2009-10-21 22:10:45 +00:00
5455170368
jmcneill's ad clause is gone.
2009-10-21 16:13:36 +00:00
23b867cb21
Remove one of christos' ad clauses.
2009-10-21 05:45:35 +00:00
102ff8abb7
reed@ no longer has any ad clauses in the tree.
2009-10-21 05:42:11 +00:00
4933e803dc
nisimura and reinoud's ad clauses are no more.
2009-10-21 00:35:35 +00:00
9aea77f19b
Mats O Jansson's ad clause is no more.
2009-10-21 00:03:42 +00:00
2efebb6654
Mark Brinicombe's acknowledgement (well, this variety of it) is in
...
legal.common, where it belongs.
2009-10-20 01:41:44 +00:00
fa54d41099
Remove the "Mats O Jansson and Charles D. Cranor" acknowledgement.
2009-10-20 00:32:11 +00:00
f34f162dd3
David Miller's entry is already in ../sparc/legal, where it belongs.
2009-10-19 19:13:13 +00:00
06ceccf7ec
Remove duplicates of ad clauses from the Alice Group (which is already
...
in legal.common, where it belongs).
2009-10-19 19:07:39 +00:00
95ce14f35a
bouyer's ad clause is no more.
2009-10-19 19:02:21 +00:00
e8bef1ce03
Eduardo Horvath's ad clause is no more.
2009-10-19 18:23:28 +00:00
97b1a7252f
Prune Pfaller.
2009-10-18 18:23:29 +00:00
83085f01e5
adrianp's ad clause is no more.
2009-10-18 14:24:17 +00:00
d510cc4c2e
agc's ad clause is no more.
2009-10-18 14:22:39 +00:00
e8f6e7d7c7
Kill two duplicate lines.
2009-10-18 01:40:44 +00:00
8e88c7b893
Move Microsoft out of legal.common and into evbarm, where it belongs.
...
I forgot to do this when I added it in 1.52.
2009-10-17 22:33:55 +00:00
792e83fe67
Sync evbppc contents with reality.
2009-10-08 05:28:22 +00:00
65817d0cbb
Build the "MONOLITHIC" kernel configuration by default and include
...
in the release.
Using the modularise "GENERIC" kernel on an existing NetBSD 5.0 system
is difficult and error-prone. The "MONOLITHIC" kernel provides an
easy way to test a new kernel or to upgrade an existing system.
2009-10-01 11:51:03 +00:00
998ba1c3ac
Fix typo in name.
2009-09-19 08:05:24 +00:00
f2a7edf211
Only generate SHA512 and MD5 checksums for releases.
2009-09-19 07:09:53 +00:00
7bc03db112
Update core group membership.
2009-09-19 06:18:01 +00:00
0613fdcb3f
Kill an incorrect bit of text about creating device nodes that had been hiding
...
under a macppc conditional. Update for today's progress bar world.
2009-08-23 22:17:18 +00:00
78b680c5cf
Revert previous per comment from ad@ in PR 41668, which is no longer orphaned.
2009-07-16 10:43:22 +00:00
73cf34a890
Add MONOLITHIC kernel to i386 release binaries. PR#41668
2009-07-15 14:11:02 +00:00
7880601279
Add myself as requested in the welcome mail.
2009-06-24 12:15:43 +00:00
11f59e32e4
Fix warning, s/.lt/.It/ for list item.
2009-05-27 09:40:01 +00:00
0cd2869469
Add necessary files for build.sh -m rs6000 release.
...
Based on PR port-powerpc/40421 from Wojciech Galazka,
with misc tweaks by me.
Note sysinst part is not pulled because there is
no supported storage device yet on this port.
2009-04-30 12:47:39 +00:00
7548a3a557
Nuke some 5.0 stuff in preparation for 6.0. Sigh.
2009-04-27 00:07:06 +00:00
ae2bdcdb20
Fix a lot more grammatical errors and inconsistencies (e.g. RiscOS -> RISC
...
OS).
2009-04-26 16:58:30 +00:00
d0ea34baab
!SparkPlug, not !SparcPlug
2009-04-26 16:44:51 +00:00
54a18014ee
Final round of INSTALL cleanups for 5.0.
2009-04-25 21:21:47 +00:00
0e48057f61
Yet another round of INSTALL fixes.
2009-04-25 10:34:42 +00:00
059a9b4ae1
Sync with (a close approximation of) reality.
2009-04-25 09:10:55 +00:00
cbd498a0a1
Another round of INSTALL improvements big and small.
2009-04-25 01:33:12 +00:00
1344cedef1
Remove some rubbish
2009-04-24 23:11:07 +00:00
ca3c228f9e
Note that SMP is broken on sparc.
2009-04-23 23:54:10 +00:00
5c8a8d50a8
Various updates to the INSTALL notes in preparation for 5.0. Changes
...
are still to come.
2009-04-23 01:56:48 +00:00
ec72b79806
Add myself to the list of developers.
2009-04-22 22:47:21 +00:00
cf205e4612
Add ver@ to the list of NetBSD developers.
2009-04-16 02:44:18 +00:00
1ce31322a1
Added myself to the list of developers
2009-04-10 10:26:24 +00:00
77737913e5
Add myself to the list of developers.
2009-04-07 19:52:04 +00:00
e0297c9429
Note that sgimips switched to X.Org, and drop the "7.3" as what we have
...
doesn't really follow any X.Org release.
2009-03-01 01:13:28 +00:00
8bbd581ff8
restore alphabetically order for my last entry
2009-02-25 17:51:25 +00:00
d41d0a631e
Add myself (Jens Rehsack <sno@NetBSD.org>)
2009-02-25 17:50:32 +00:00
5c0772df92
added myself to the list of developers
2009-02-23 16:42:58 +00:00
3578465a0d
Under "The following issues need to be resolved manually", say that
...
unprivileged use of mount(8) now needs the nosuid and nodev flags.
2009-02-22 14:32:54 +00:00
bdc237349e
Under "Features to be removed in a later release", try to explain what
...
softdep is, as well as saying that it will be removed. Say that the
WAPBL in netbsd-5 is a "preview", not an "experimental preview".
2009-02-22 14:21:48 +00:00
31cb0781a5
Added myself.
2009-02-17 21:41:20 +00:00
7e2b3238db
Various updates to the install notes.
2009-01-26 00:14:42 +00:00
f59480d8df
Switch evbpcc sysinst and install notes to referencing WALNUT/OPENBLOCKS266
...
kernels, rather than (nonexistant) GENERIC
from KIYOHARA Takashi
2009-01-25 17:48:05 +00:00
7896e124da
Move ATARITT and FALCON to the main list of kernels
2009-01-24 22:33:39 +00:00
1f13a9d79a
- Sync atari sysinst install kernel list with reality:
...
- BOOT reanamed to SMALL030
- ATARITT and FALCON were missing
- Update release notes to kernel list and also clarify Milan kernels
2009-01-24 21:20:22 +00:00
0dc03e2d81
Follow up the rename of BOOT to SMALL030, and the removal of BOOTX.
2009-01-24 18:15:16 +00:00
6ad7662725
Pare down the size of the INSTALL kernel images. This was done by:
...
1) Removing chio, rcmd, restore, scsictl, shutdown and slattach
from the ramdisk images
2) Removing the isp* driver from the INSTALL kernel configs
3) Reducing the memory disk and ramdisk size back from 4400 to 4200 blocks
As a result, also remove mention as QLogic ISP controllers as being
supported by the installation.
With this, the INSTALL kernel images should once again be usable;
the firmware apparently imposes a size limit around 5MB on the files
it will load.
Longer-term, this port probably ought to get it's own stand-alone boot
loader, so that it might use e.g. loadable modules.
2009-01-21 14:43:14 +00:00
bf788f2d48
Add my name to the list of developers.
2009-01-03 12:01:24 +00:00
29221b9676
Add myself.
2008-12-09 00:50:27 +00:00
1588416646
Added myself.
2008-11-30 21:13:03 +00:00
445a0ac38f
Hand over copyright to TNF
2008-11-29 10:27:03 +00:00
a77a42969d
Note that re(4), ath(4), and puc(4) are known to work on sparc64.
2008-11-28 23:38:04 +00:00
7c6c93a6fb
Note root partition size limitations on certain sparc and sparc64 models
...
(taken from the boot(8) manual pages).
2008-11-20 20:52:17 +00:00
f5307d8be7
Fix a typo in an Xref to apropos.
2008-11-19 00:56:53 +00:00
fbd92dfb9a
Fix a spelling error.
2008-11-19 00:56:38 +00:00
987a8f6dde
Update for Xorg, add 'z' to a tar command, and remove a sentence that
...
shouldn't have escaped its conditionalized branch.
2008-11-15 04:11:51 +00:00
36019ecef8
Two wording fixes.
2008-11-15 03:47:49 +00:00
25103e865f
Slight update for Xorg, a couple devices, and size requirements. Needs
...
some more changes.
2008-11-15 03:46:32 +00:00
fea18d62f5
Add myself.
2008-11-10 11:30:59 +00:00
153daecc08
Add self.
2008-10-30 23:51:38 +00:00
9c005fd476
Update an URL for David Pilling's !SparkPlug. From prep.RISCOS rev 1.19.
2008-10-29 17:07:33 +00:00
1495bb47dc
Update MACHINE_LIST and MACHINE_ARCH_LIST.
2008-10-29 17:02:54 +00:00
27d3317a9d
Use \*[Lt] and \*[Gt] rather than '<' and '>' directly.
2008-10-29 17:01:50 +00:00
ac5762adf2
- remove rarely maintained whatis files
...
- wipe out changes lists for 4.0 (newer ones might be pulled from doc/CHANGES)
- list some updated 3rd party programs
2008-10-29 13:09:25 +00:00
f46c1de7cb
Use ${TOOL_SED} instead if plain sed in Makefiles.
2008-10-25 22:27:34 +00:00
57b165483e
Add self.
2008-10-18 20:20:01 +00:00
540cab1ec8
jme(4), a driver for JMicron Technologies JME250 Gigabit Ethernet and
...
JME260 Fast Ethernet PCI Express controllers.
Written with a lot of cut-n-paste from the FreeBSD jme(4) driver.
No support for jumbo ethernet frames yet (but should come soon).
Thanks to JMicron Technologies for providing me sample boards and
documentation for this work.
2008-10-11 21:54:11 +00:00
9957bf949d
Use `\*[Am]' rather than `\*&' for ampersand.
2008-09-27 23:15:21 +00:00
d1a2dd9a18
Use a 192.0.2.0/24 address in example per RFC 3330. Suggested by tron@.
2008-09-27 01:26:28 +00:00
12cf7a7189
- use appropriate IFnames for each port
...
- use le0 as the default IFname for our favorite but orphaned antique ports,
rather than modern but obsolete de0
- use a private IP address in example
2008-09-26 12:42:48 +00:00
b8968a60a8
Remove useless contents.
2008-09-25 15:41:52 +00:00
c25b4d193d
Add a note about a version mismatch warning of pkg_add(1) command.
2008-09-21 14:24:00 +00:00
c5424a41b2
Update URLs for packages PKG_PATH from obsolete one:
...
ftp://ftp.NetBSD.org/pub/NetBSD/packages/{VERSION}/{MACHINE}/All
to newer one:
ftp://ftp.NetBSD.org/pub/pkgsrc/packages/NetBSD/{MACHINE}/{VERSION}/All
which is documented in the pkgsrc guide, and also note the alternative path:
/pub/NetBSD/packages/current-packages/NetBSD/{MACHINE}/{VERSION}/All
for mirrors which don't mirror /pub/pkgsrc but have only /pub/NetBSD.
2008-09-20 08:34:28 +00:00
cbda6f9085
Use proper .Pq macro to restore parentheses removed by my wrong fix
...
in rev 1.90.
2008-09-14 23:39:02 +00:00
d58de8d3e7
Reformat port-maintainers list and use @NetBSD.org address as other lists.
...
XXX: list-portmasters.pl needs to be updated.
2008-09-13 15:54:57 +00:00
c07124b6d6
First cut at INSTALL notes for NetBSD/arc.
...
Finally we could close another ancient PR port-arc/11443.
After several years, we got the native bootloader and then had
sysinst which would do apprpriate partitioning for the bootloader,
so I've noted the last difficult part, how to specify boot commands
on the ARC BIOS.
I still wonder how many possible users of NetBSD/arc are there
who will need this topic though... ;-p
2008-09-13 15:43:07 +00:00
3c17f72932
I guess it is about time that I added my name.
2008-09-09 15:44:10 +00:00
ba80934542
Add myself.
2008-09-09 15:39:04 +00:00
1109e74808
Remove obsolete description for old xen-i386 port. Ok'ed by bouyer@.
2008-09-08 16:10:14 +00:00
eecd5c0366
Add self.
2008-09-08 14:54:09 +00:00
682dda6a54
Suppress the whitespace after parenthesis.
2008-09-07 05:11:55 +00:00
dede91a20b
Use \*[Lt] and \*[Gt].
2008-09-07 05:09:12 +00:00
cd77da4958
Fix empty line warning.
2008-09-07 05:08:42 +00:00
6776e6b202
Fix a typo in previous.
2008-09-07 04:45:18 +00:00
4ee53937d3
Use \*[Gt].
2008-09-06 22:22:39 +00:00
d7f9ab6a0e
Use \*[Lt] and \*[Gt].
2008-09-06 22:19:03 +00:00
1091a34f7b
Use \*[Lt] and \*[Gt].
2008-09-06 22:14:45 +00:00
858eeff6b3
Use \*[Gt].
2008-09-06 22:11:44 +00:00
1fd8e62a1e
Use \*[Lt] and \*[Gt].
2008-09-06 22:05:36 +00:00
snj