Use \*[Gt].
This commit is contained in:
tsutsui
parent
d7f9ab6a0e
commit
4ee53937d3
|
|
@ -1,4 +1,4 @@
|
|||
.\" $NetBSD: install,v 1.3 2004/08/27 16:53:13 wiz Exp $
|
||||
.\" $NetBSD: install,v 1.4 2008/09/06 22:22:39 tsutsui Exp $
|
||||
.
|
||||
.Ss2 Booting the installer
|
||||
.
|
||||
|
|
@ -11,7 +11,7 @@ and what your boot method is, but we'll include this anyways just so you
|
|||
get an idea of what to expect (user-typed commands are in
|
||||
.Ic bold ) .
|
||||
.(disp
|
||||
.No DINK32\*>\*> Ic go 90000
|
||||
.No DINK32\*[Gt]\*[Gt] Ic go 90000
|
||||
[ XXX - insert boot w/ installer on ramdisk instead of this example ]
|
||||
.disp)
|
||||
.
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
.\" $NetBSD: install,v 1.6 2008/04/30 13:10:49 martin Exp $
|
||||
.\" $NetBSD: install,v 1.7 2008/09/06 22:30:14 tsutsui Exp $
|
||||
.\"
|
||||
.\" Copyright (c) 1999-2002 The NetBSD Foundation, Inc.
|
||||
.\" All rights reserved.
|
||||
|
|
@ -58,13 +58,13 @@ entitled
|
|||
and boot the tape.
|
||||
At the PROM monitor prompt, use one of the commands:
|
||||
.Pp
|
||||
.Dl \*> Ns Ic "b st()"
|
||||
.Dl \*> Ns Ic "b st(0,8,0)"
|
||||
.Dl \*[Gt] Ns Ic "b st()"
|
||||
.Dl \*[Gt] Ns Ic "b st(0,8,0)"
|
||||
.Pp
|
||||
The first example will use the tape on SCSI target 4, where the
|
||||
second will use SCSI target 5.
|
||||
The
|
||||
.Li \*>
|
||||
.Li \[Gt]*
|
||||
is the monitor prompt.
|
||||
.Pp
|
||||
After the tape loads, you should see many lines of configuration
|
||||
|
|
@ -125,8 +125,8 @@ and if it has 3Com Ethernet, this is
|
|||
.Em ec .
|
||||
Examples:
|
||||
.Pp
|
||||
.Dl \*> Ns Ic "b ie() -s"
|
||||
.Dl \*> Ns Ic "b ec() -s"
|
||||
.Dl \*[Gt] Ns Ic "b ie() -s"
|
||||
.Dl \*[Gt] Ns Ic "b ec() -s"
|
||||
.Pp
|
||||
After the boot program loads the RAMDISK kernel, you should
|
||||
see the welcome screen as shown in the
|
||||
|
|
@ -136,7 +136,7 @@ You must configure the network interface before you
|
|||
can use any network resources.
|
||||
For example the command:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "ifconfig ie0 inet 192.233.20.198 up"
|
||||
.Dl ssh\*[Gt] Ic "ifconfig ie0 inet 192.233.20.198 up"
|
||||
.Pp
|
||||
will bring up the network interface with that address.
|
||||
The next step is to copy the miniroot from your server.
|
||||
|
|
@ -145,21 +145,21 @@ This can be done using either NFS or remote shell.
|
|||
You may then need to
|
||||
add a default route if the server is on a different subnet:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "route add default 192.233.20.255 1"
|
||||
.Dl ssh\*[Gt] Ic "route add default 192.233.20.255 1"
|
||||
.Pp
|
||||
You can look at the route table using:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "route show"
|
||||
.Dl ssh\*[Gt] Ic "route show"
|
||||
.Pp
|
||||
Now mount the NFS file system containing the miniroot image:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "mount -o rdonly,-r=1024 192.233.20.195:/server/path /mnt"
|
||||
.Dl ssh\*[Gt] Ic "mount -o rdonly,-r=1024 192.233.20.195:/server/path /mnt"
|
||||
.Pp
|
||||
The procedure is simpler and much faster if you have space for an expanded
|
||||
(not compressed) copy of the miniroot image.
|
||||
In that case:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "dd if=/mnt/miniroot.fs of=/dev/rsd0b bs=8k"
|
||||
.Dl ssh\*[Gt] Ic "dd if=/mnt/miniroot.fs of=/dev/rsd0b bs=8k"
|
||||
.Pp
|
||||
Otherwise, you will need to use
|
||||
.Ic zcat
|
||||
|
|
@ -178,15 +178,15 @@ and then run the other program in the foreground with its output to
|
|||
.Pa /dev/pipe .
|
||||
The result looks like this:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "run -bg dd if=/dev/pipe of=/dev/rsd0b obs=8k"
|
||||
.Dl ssh\*> Ic "run -o /dev/pipe zcat /mnt/install/miniroot.fs.gz"
|
||||
.Dl ssh\*[Gt] Ic "run -bg dd if=/dev/pipe of=/dev/rsd0b obs=8k"
|
||||
.Dl ssh\*[Gt] Ic "run -o /dev/pipe zcat /mnt/install/miniroot.fs.gz"
|
||||
.Pp
|
||||
To load the miniroot using rsh to the server, you would use a
|
||||
pair of commands similar to the above.
|
||||
Here is another example:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "run -b dd if=/dev/pipe of=/dev/rsd0b obs=8k"
|
||||
.Dl ssh\*> Ic "run -o /dev/pipe rsh 192.233.20.195 zcat miniroot.fs.gz"
|
||||
.Dl ssh\*[Gt] Ic "run -b dd if=/dev/pipe of=/dev/rsd0b obs=8k"
|
||||
.Dl ssh\*[Gt] Ic "run -o /dev/pipe rsh 192.233.20.195 zcat miniroot.fs.gz"
|
||||
.Pp
|
||||
Note that decompression on a sun2 is
|
||||
.Em extremely
|
||||
|
|
@ -253,11 +253,11 @@ If the miniroot was installed on partition
|
|||
of the disk with
|
||||
SCSI target ID=0 then the PROM boot command would be:
|
||||
.Pp
|
||||
.Dl \*> Ns Ic "b sd(0,0,1) -s"
|
||||
.Dl \*[Gt] Ns Ic "b sd(0,0,1) -s"
|
||||
.Pp
|
||||
With SCSI target ID=2, the PROM is:
|
||||
.Pp
|
||||
.Dl \*> Ns Ic "b sd(0,10,1) -s"
|
||||
.Dl \*[Gt] Ns Ic "b sd(0,10,1) -s"
|
||||
.Pp
|
||||
The numbers in parentheses above are:
|
||||
.(enum -compact -offset indent
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
.\" $NetBSD: install,v 1.15 2008/04/30 13:10:49 martin Exp $
|
||||
.\" $NetBSD: install,v 1.16 2008/09/06 22:31:53 tsutsui Exp $
|
||||
.\"
|
||||
.\" Copyright (c) 1999-2001 The NetBSD Foundation, Inc.
|
||||
.\" All rights reserved.
|
||||
|
|
@ -58,13 +58,13 @@ entitled
|
|||
and boot the tape.
|
||||
At the PROM monitor prompt, use one of the commands:
|
||||
.Pp
|
||||
.Dl \*> Ns Ic "b st()"
|
||||
.Dl \*> Ns Ic "b st(0,8,0)"
|
||||
.Dl \*[Gt] Ns Ic "b st()"
|
||||
.Dl \*[Gt] Ns Ic "b st(0,8,0)"
|
||||
.Pp
|
||||
The first example will use the tape on SCSI target 4, where the
|
||||
second will use SCSI target 5.
|
||||
The
|
||||
.Li \*>
|
||||
.Li \*[Gt]
|
||||
is the monitor prompt.
|
||||
.Pp
|
||||
After the tape loads, you should see many lines of configuration
|
||||
|
|
@ -126,8 +126,8 @@ and
|
|||
on the others.
|
||||
Examples:
|
||||
.Pp
|
||||
.Dl \*> Ns Ic "b le() -s"
|
||||
.Dl \*> Ns Ic "b ie() -s"
|
||||
.Dl \*[Gt] Ns Ic "b le() -s"
|
||||
.Dl \*[Gt] Ns Ic "b ie() -s"
|
||||
.Pp
|
||||
After the boot program loads the RAMDISK kernel, you should
|
||||
see the welcome screen as shown in the
|
||||
|
|
@ -137,7 +137,7 @@ You must configure the network interface before you
|
|||
can use any network resources.
|
||||
For example the command:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "ifconfig le0 inet 192.233.20.198 up"
|
||||
.Dl ssh\*[Gt] Ic "ifconfig le0 inet 192.233.20.198 up"
|
||||
.Pp
|
||||
will bring up the network interface with that address.
|
||||
The next step is to copy the miniroot from your server.
|
||||
|
|
@ -146,21 +146,21 @@ This can be done using either NFS or remote shell.
|
|||
You may then need to add a default route if the server is on
|
||||
a different subnet:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "route add default 192.233.20.255 1"
|
||||
.Dl ssh\*[Gt] Ic "route add default 192.233.20.255 1"
|
||||
.Pp
|
||||
You can look at the route table using:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "route show"
|
||||
.Dl ssh\*[Gt] Ic "route show"
|
||||
.Pp
|
||||
Now mount the NFS file system containing the miniroot image:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "mount -r 192.233.20.195:/server/path /mnt"
|
||||
.Dl ssh\*[Gt] Ic "mount -r 192.233.20.195:/server/path /mnt"
|
||||
.Pp
|
||||
The procedure is simpler if you have space for an expanded
|
||||
(not compressed) copy of the miniroot image.
|
||||
In that case:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "dd if=/mnt/miniroot.fs of=/dev/rsd0b bs=8k"
|
||||
.Dl ssh\*[Gt] Ic "dd if=/mnt/miniroot.fs of=/dev/rsd0b bs=8k"
|
||||
.Pp
|
||||
Otherwise, you will need to use
|
||||
.Ic zcat
|
||||
|
|
@ -178,15 +178,15 @@ and then run the other program in the foreground with its output to
|
|||
.Pa /dev/pipe .
|
||||
The result looks like this:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "run -bg dd if=/dev/pipe of=/dev/rsd0b obs=8k"
|
||||
.Dl ssh\*> Ic "run -o /dev/pipe zcat /mnt/install/miniroot.fs.gz"
|
||||
.Dl ssh\*[Gt] Ic "run -bg dd if=/dev/pipe of=/dev/rsd0b obs=8k"
|
||||
.Dl ssh\*[Gt] Ic "run -o /dev/pipe zcat /mnt/install/miniroot.fs.gz"
|
||||
.Pp
|
||||
To load the miniroot using rsh to the server, you would use a
|
||||
pair of commands similar to the above.
|
||||
Here is another example:
|
||||
.Pp
|
||||
.Dl ssh\*> Ic "run -b dd if=/dev/pipe of=/dev/rsd0b obs=8k"
|
||||
.Dl ssh\*> Ic "run -o /dev/pipe rsh 192.233.20.195 zcat miniroot.fs.gz"
|
||||
.Dl ssh\*[Gt] Ic "run -b dd if=/dev/pipe of=/dev/rsd0b obs=8k"
|
||||
.Dl ssh\*[Gt] Ic "run -o /dev/pipe rsh 192.233.20.195 zcat miniroot.fs.gz"
|
||||
.
|
||||
.Ss2 Installing from SunOS
|
||||
.
|
||||
|
|
@ -237,11 +237,11 @@ If the miniroot was installed on partition
|
|||
of the disk with
|
||||
SCSI target ID=0 then the PROM boot command would be:
|
||||
.Pp
|
||||
.Dl \*> Ns Ic "b sd(0,0,1) -s"
|
||||
.Dl \*[Gt] Ns Ic "b sd(0,0,1) -s"
|
||||
.Pp
|
||||
With SCSI target ID=2, the PROM is:
|
||||
.Pp
|
||||
.Dl \*> Ns Ic "b sd(0,10,1) -s"
|
||||
.Dl \*[Gt] Ns Ic "b sd(0,10,1) -s"
|
||||
.Pp
|
||||
The numbers in parentheses above are:
|
||||
.(enum -compact -offset indent
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
.\" $NetBSD: install,v 1.16 2008/04/30 13:10:49 martin Exp $
|
||||
.\" $NetBSD: install,v 1.17 2008/09/06 22:32:07 tsutsui Exp $
|
||||
.\"
|
||||
.\" Copyright (c) 1999-2002 The NetBSD Foundation, Inc.
|
||||
.\" All rights reserved.
|
||||
|
|
@ -62,7 +62,7 @@ of which VAX you have.
|
|||
To just boot from a device, type
|
||||
.Sq Ic B
|
||||
at the
|
||||
.Li \*>\*>\*>
|
||||
.Li \*[Gt]\*[Gt]\*[Gt]
|
||||
prompt.
|
||||
Device naming in the console monitor differs a lot from the
|
||||
.Ux
|
||||
|
|
|
|||
Loading…
Reference in New Issue