and link it directly to db_command_table[] so that it's not necessary
to do this at runtime. Make db_machine_command_table[] const on all ports.
g/c now unneded stuff, like db_machine_commands_install(), db_machine_init()
Patch written by enami.
the link level name for the interface (ifp->if_sadl) is allocated
before ifp->if_addrlen is initialized, which could lead to allocating
too little space for the link level address.
Do this by splitting allocation of the link level name out of
if_attach() and into if_alloc_sadl(), which is normally called
by functions like ether_ifattach(). Network interfaces which
don't have a link-specific attach routine must call if_alloc_sadl()
themselves (example: gif).
Link level names are freed by if_free_sadl(), which can be called
from e.g. ether_ifdetach(). Drivers never need call if_free_sadl()
themselves as if_detach() will do it if it is not already done.
While here, add the ability to pass an AF_LINK address to
SIOCSIFADDR in ether_ioctl() (this is what caused me to notice
the problem that the above fixes).
and place the definition in <machine/types.h>. This can now be used
as a flag to indicate whether or not <machine/intr.h> can be included
to get the generic soft interrupt API.
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
at tcds in files.alpha for now, and add a new `xasc at tcds' to files.pmax.
after pmax has moved fully to MI scsi (and `asc' is MI scsi), we should move
the device asc, etc., lines to files.tc.
> PCMCIAVERBOSE (commented out)
> isapnp at isa (commented out)
> midi at pcppi
> ep at isapnp (commented out)
> ix at isa (commented out)
> iy at isa (commented out)
> wdc at isapnp (commented out)
> wss at isapnp (commented out)
>
> The isapnp stuff is commented out because it may crash due to unimplemented
> alloc methods on some machines with some devices. This should really get
> fixed.
PCMCIAVERBOSE (commented out)
isapnp at isa (commented out)
midi at pcppi
ep at isapnp (commented out)
ix at isa (commented out)
iy at isa (commented out)
wdc at isapnp (commented out)
wss at isapnp (commented out)
The isapnp stuff is commented out because it may crash due to unimplemented
alloc methods on some machines with some devices. This should really get
fixed.
pci_attach_args *" instead of from four separate parameters which in
all cases were extracted from the same "struct pci_attach_args".
This both simplifies the driver api, and allows for alternate PCI
interrupt mapping schemes, such as one using the tables described in
the Intel Multiprocessor Spec which describe interrupt wirings for
devices behind pci-pci bridges based on the device's location rather
the bridge's location.
Tested on alpha and i386; welcome to 1.5Q
XXX if you have libc after citrus locale import, please recompile libc,
and your applications that use mbstate_t (rather rare). really sorry
for the mess.
only signal handler array sharable between threads
move other random signal stuff from struct proc to struct sigctx
This addresses kern/10981 by Matthew Orgass.
(Lynx), written from scratch by me over a year ago, but never committed
to the tree because there was a bug I could never quite find. I have
fixed a few problems in the code, but still don't know if that bug is
quite fixed. Since I don't have access to the hardware directly, I'll
have to call for testers again.
work-around. It's required in order for the DEC Multia (a very
brain-damaged little machine) to work properly.
Submitted by Juergen Weiss <weiss@uni-mainz.de>, addresses
port-alpha/11202.
constructed L1 PT page, this saves us from having to copy the kernel
L1 PTEs into the user L1 PT page at fork time (it's already set up).
A simple test shows a 1 second improvement of a rapid fork/exit operation
10000 times on a 533MHz 21164A (12s to 11s).
multiprocessor support:
- Implement MP-safe halt.
- Make the FPU saving code more like Bill's on the i386 MP branch.
XXX This code will no doubt be revisited again.
- Pass the cpu_info and trapframe to IPI handlers, saving some work
in the handlers themselves, and also making it possible for the
"pause" handler to reference register state for DDB.
- Add "machine cpu" to DDB, making it possible to reference other
CPUs registers (and thus get e.g. a traceback) from whichever
CPU is actually running the debugger.
- Garbage-collect "machine halt" and "machine reboot" DDB commands.
They don't have a prayer of working properly in multiprocessor
kernels, and didn't really work all that well in uniprocessor kernels.
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
as normal device interrupts. Because of this, we won't get IPIs while
servicing such interrupts. This can lead to the following deadlock
scenario as reported by Bill Sommerfeld:
- Process runs on cpu1, but has FP state on cpu0.
- Process executes FP-using insn, causing an FP trap, which causes
the kernel lock to be acquired.
- At roughly the same time, cpu0 receives a device interrupt, and attempts
to acquire the kernel lock, which blocks since cpu1 already has it.
- cpu1 sends cpu0 a SYNCH FPU IPI, and waits for cpu0 to release its
FP state.
- Since cpu0 cannot notice the IPI until it has processed the device
interrupt, which it cannot do because it cannot acquire the kernel
lock, we have deadlock.
Solve the problem by adding a spinlock interlock release hook which
checks for pending IPIs and processes them.
Idea from Bill Sommerfeld.
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
CPU to handle interrupts, but prevents a whole slew of things
from working properly on the second CPU. It is no longer
necessary now that several other bugs have been fixed.
on it, and make sure to deactivate the old process's address space,
as this will not otherwise be done by cpu_switch() later once we're
on the idle PCB.
Also, update some comments related to when s0 (i.e. the old process)
is NULL in the context switching code.
Drochner's work made in nisimura-pmax-wscons branch. Still a little
to do before useful for DECstation. MI softintr required.
- allow wildcard matchs to have zstty/zskbd/zsms in default hardware
configuration.
- abandon to check zs_ioasic_cnattach() return value; it doesn't fail.
- have zs_ioasic_cnattach() serial line parameters hardcoded inside, in
symmetry with zs_ioasic_lk201_cnattach().
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
Check the first partition type in devopen(), and if it is of type
FS_RAID, add 64 to blkdev_part_offset.
NOTE: This brings the size of the alpha first-stage bootblocks up to
close to the maximum. RAID1 support is controlled by the
BOOTXX_RAID1_SUPPORT define, and is easy to disable if size
becomes an issue.
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
indeed tagged with ASM and the ASN, "per the Alpha architecture".
It is therefore safe to cancel any pending lazy I-sync on a
given CPU when a new ASN is assigned on that CPU.
w/ Chuq Silvers. Fixes a panic when a program with wired pages that
has run for a long time when the system is under heavy memory load
exits (specific case was ntpd, reported by Simon Burge).
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
in the non-MULTIPROCESSOR case (LOCKDEBUG requires it). Scheduler
lock is held upon entry to mi_switch() and cpu_switch(), and
cpu_switch() releases the lock before returning.
Largely from Bill Sommerfeld, with some minor bug fixes and
machine-dependent code hacking from me.
itojun