The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.
No functional change.
- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
- kern/48308
- uhub status notification improvements
- umass(4) probe fix (applied to HEAD already)
- ohci(4) short transfer fix
This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.
This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.
To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.
Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html
Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!
- Add PCI Extended Configuration Space support into x86.
- Check register offset of pci_conf_read() in MD part. It returns (pcireg_t)-1
if it isn't accessible.
- Decode Extended Capability in PCI Extended Configuration Space.
Currently the following extended capabilities are decoded:
- Advanced Error Reporting
- Virtual Channel
- Device Serial Number
- Power Budgeting
- Root Complex Link Declaration
- Root Complex Event Collector Association
- Access Control Services
- Alternative Routing-ID Interpretation
- Address Translation Services
- Single Root IO Virtualization
- Page Request
- TPH Requester
- Latency Tolerance Reporting
- Secondary PCI Express
- Process Address Space ID
- LN Requester
- L1 PM Substates
The following extended capabilities are not decoded yet:
- Root Complex Internal Link Control
- Multi-Function Virtual Channel
- RCRB Header
- Vendor Unique
- Configuration Access Correction
- Multiple Root IO Virtualization
- Multicast
- Resizable BAR
- Dynamic Power Allocation
- Protocol Multiplexing
- Downstream Port Containment
- Precision Time Management
- M-PCIe
- Function Reading Status Queueing
- Readiness Time Reporting
- Designated Vendor-Specific
1) Move core entropy-pool code and source/sink/sample management code
to sys/kern from sys/dev.
2) Remove use of NRND as test for presence of entropy-pool code throughout
source tree.
3) Remove use of RND_ENABLED in device drivers as microoptimization to
avoid expensive operations on disabled entropy sources; make the
rnd_add calls do this directly so all callers benefit.
4) Fix bug in recent rnd_add_data()/rnd_add_uint32() changes that might
have lead to slight entropy overestimation for some sources.
5) Add new source types for environmental sensors, power sensors, VM
system events, and skew between clocks, with a sample implementation
for each.
ok releng to go in before the branch due to the difficulty of later
pullup (widespread #ifdef removal and moved files). Tested with release
builds on amd64 and evbarm and live testing on amd64.
<20111022023242.BA26F14A158@mail.netbsd.org>. This change includes
the following:
An initial cleanup and minor reorganization of the entropy pool
code in sys/dev/rnd.c and sys/dev/rndpool.c. Several bugs are
fixed. Some effort is made to accumulate entropy more quickly at
boot time.
A generic interface, "rndsink", is added, for stream generators to
request that they be re-keyed with good quality entropy from the pool
as soon as it is available.
The arc4random()/arc4randbytes() implementation in libkern is
adjusted to use the rndsink interface for rekeying, which helps
address the problem of low-quality keys at boot time.
An implementation of the FIPS 140-2 statistical tests for random
number generator quality is provided (libkern/rngtest.c). This
is based on Greg Rose's implementation from Qualcomm.
A new random stream generator, nist_ctr_drbg, is provided. It is
based on an implementation of the NIST SP800-90 CTR_DRBG by
Henric Jungheim. This generator users AES in a modified counter
mode to generate a backtracking-resistant random stream.
An abstraction layer, "cprng", is provided for in-kernel consumers
of randomness. The arc4random/arc4randbytes API is deprecated for
in-kernel use. It is replaced by "cprng_strong". The current
cprng_fast implementation wraps the existing arc4random
implementation. The current cprng_strong implementation wraps the
new CTR_DRBG implementation. Both interfaces are rekeyed from
the entropy pool automatically at intervals justifiable from best
current cryptographic practice.
In some quick tests, cprng_fast() is about the same speed as
the old arc4randbytes(), and cprng_strong() is about 20% faster
than rnd_extract_data(). Performance is expected to improve.
The AES code in src/crypto/rijndael is no longer an optional
kernel component, as it is required by cprng_strong, which is
not an optional kernel component.
The entropy pool output is subjected to the rngtest tests at
startup time; if it fails, the system will reboot. There is
approximately a 3/10000 chance of a false positive from these
tests. Entropy pool _input_ from hardware random numbers is
subjected to the rngtest tests at attach time, as well as the
FIPS continuous-output test, to detect bad or stuck hardware
RNGs; if any are detected, they are detached, but the system
continues to run.
A problem with rndctl(8) is fixed -- datastructures with
pointers in arrays are no longer passed to userspace (this
was not a security problem, but rather a major issue for
compat32). A new kernel will require a new rndctl.
The sysctl kern.arandom() and kern.urandom() nodes are hooked
up to the new generators, but the /dev/*random pseudodevices
are not, yet.
Manual pages for the new kernel interfaces are forthcoming.
pci_find_rom(), pci_intr_map(9), pci_enumerate_bus(), nor the match
predicate passed to pciide_compat_intr_establish() should ever modify
their pci_attach_args argument, so make their pci_attach_args arguments
const and deal with the fallout throughout the kernel.
For the most part, these changes add a 'const' where there was no
'const' before, however, some drivers and MD code used to modify
pci_attach_args. Now those drivers either copy their pci_attach_args
and modify the copy, or refrain from modifying pci_attach_args:
Xen: according to Manuel Bouyer, writing to pci_attach_args in
pci_intr_map() was a leftover from Xen 2. Probably a bug. I
stopped writing it. I have not tested this change.
siside(4): sis_hostbr_match() needlessly wrote to pci_attach_args.
Probably a bug. I use a temporary variable. I have not tested this
change.
slide(4): sl82c105_chip_map() overwrote the caller's pci_attach_args.
Probably a bug. Use a local pci_attach_args. I have not tested
this change.
viaide(4): via_sata_chip_map() and via_sata_chip_map_new() overwrote the
caller's pci_attach_args. Probably a bug. Make a local copy of the
caller's pci_attach_args and modify the copy. I have not tested
this change.
While I'm here, make pci_mapreg_submap() static.
With these changes in place, I have tested the compilation of these
kernels:
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-eb NSLU2
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE GUMSTIX
HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321 IXDP425 IXM1200
KUROBOX_PRO LUBBOCK MARVELL_NAS NAPPI SHEEVAPLUG SMDK2800 TEAMASA_NPWR
TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sgimips GENERIC32_IP2x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC
As of Sun Apr 3 15:26:26 CDT 2011, I could not compile these kernels
with or without my patches in place:
### evbmips-el GDIUM
nbmake: nbmake: don't know how to make /home/dyoung/pristine-nbsd/src/sys/arch/mips/mips/softintr.c. Stop
### evbarm-el MPCSA_GENERIC
src/sys/arch/evbarm/conf/MPCSA_GENERIC:318: ds1672rtc*: unknown device `ds1672rtc'
### ia64 GENERIC
/tmp/genassym.28085/assym.c: In function 'f111':
/tmp/genassym.28085/assym.c:67: error: invalid application of 'sizeof' to incomplete type 'struct pcb'
/tmp/genassym.28085/assym.c:76: error: dereferencing pointer to incomplete type
### sgimips GENERIC32_IP3x
crmfb.o: In function `crmfb_attach':
crmfb.c:(.text+0x2304): undefined reference to `ddc_read_edid'
crmfb.c:(.text+0x2304): relocation truncated to fit: R_MIPS_26 against `ddc_read_edid'
crmfb.c:(.text+0x234c): undefined reference to `edid_parse'
crmfb.c:(.text+0x234c): relocation truncated to fit: R_MIPS_26 against `edid_parse'
crmfb.c:(.text+0x2354): undefined reference to `edid_print'
crmfb.c:(.text+0x2354): relocation truncated to fit: R_MIPS_26 against `edid_print'
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
struct timeval passed to todr_gettime(9) and todr_settime(9).
We no longer have an ancient and volatile struct timeval `time'
global since we have switched to MI timercounter(9) on all port.
XXX1: some of these RTC drivers still assume 32bit time_t
XXX2: some of these should be rewritten to use todr_[gs]ettime_ymdhms()
XXX3: todr(9) man page doesn't mention todr_[gs]ettime_ymdhms()
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)
mips struct cpu_info and related macroes.
The member was prepared for a hack in MD microtime(9) implementation
but it has been superseded by MI timecounter(9).
handling, ether_mediastatus() and ether_mediachange(). Check for
a non-ENXIO error return from mii_mediachg(). (ENXIO indicates
that a PHY is suspended.)
This patch shrinks the source code size by 979 lines. There was
a 5100-byte savings on the NetBSD/i386 kernel configuration, ALL.
I have made a few miscellaneous changes, too:
gem(4): use LIST_EMPTY(), LIST_FOREACH().
mtd(4): handle media ioctls, for a change!
axe(4): do not track link status in sc->axe_link any longer
nfe(4), aue(4), axe(4), udav(4), url(4): do not reset all PHYs
on a change of media
Except for the change to mtd(4), no functional changes are intended.
XXX This patch affects more architectures than I can feasibly
XXX compile and run. I have compiled macppc, sparc64, i386. I
XXX have run the patches on i386 boxen with bnx(4) and sip(4).
XXX Compiling and running on evbmips (MERAKI, ADM5120) is in
XXX progress.
