33e277929f
Typos/whitespace.
2001-06-12 14:54:19 +00:00
29a0f47f4f
Typos/whitespace.
2001-06-12 14:41:40 +00:00
3bd0afbc54
Make tracing of stack by frame argument work.
2001-06-12 13:22:06 +00:00
5335780e31
Support to get into DDB from hardclock interrupts by putting a value in
...
the RPB wait field.
2001-06-12 13:20:29 +00:00
8f96f4b21c
Fix problem where console interrupts never got enabled after RB_ASKNAME.
2001-06-12 13:18:38 +00:00
a0b4d95fd0
Typos/whitespace.
2001-06-12 12:04:22 +00:00
f34929a45f
Typos/whitespace/punctuation.
2001-06-12 12:00:19 +00:00
cb6b68a931
Mention where I got the information for writing the driver.
2001-06-12 11:52:03 +00:00
f6f3c9b35f
Add a hefty comment about the stray IR bug, so I don't forget it.
2001-06-12 11:49:18 +00:00
b50f28c38a
underrun, not underun
2001-06-12 11:48:51 +00:00
b8ce84dc0b
Typos/whitespace fixes.
2001-06-12 11:39:02 +00:00
bcc9b7d985
Typos/whitespace.
2001-06-12 11:35:03 +00:00
55e73f8bc1
I was too careless. Do not throw away the prepared string. :p
2001-06-12 11:29:31 +00:00
75dbb967a7
Typos/whitespace fixes.
2001-06-12 11:26:21 +00:00
8f68bebb7e
Detect 4000/VLC correctly + make halt/reboot work.
...
From Michael L. Hitch (mhitch@montana.edu ).
2001-06-12 11:24:50 +00:00
5d6ce3b75c
Make this compile again.
2001-06-12 10:30:04 +00:00
b1b468a365
Remove unneeded whitespace.
2001-06-12 10:03:04 +00:00
be97fea093
Remove Makefile.cats. We now use the arch/arm/conf/Makefile.arm.
2001-06-12 08:33:48 +00:00
eb541612a0
Add cats specific makefile for tags and includes.
2001-06-12 08:32:46 +00:00
f90999bd42
Cats doesn't need io.h any more as it has it's own conf.c files.
2001-06-12 08:31:53 +00:00
a7b8789da8
Add cats specific autoconf and conf.c. Also add defopt NETWINDER to files.cats, this is so a few things that include opt_netwinder compile.
2001-06-12 08:30:47 +00:00
8c53bc98ee
comment out MEMORY_DISK_HOOKS, currently cats can only use an in-kernel memory disk.
2001-06-12 08:27:08 +00:00
42a2e688fe
If the parent interface can do hardware-assisted VLAN encapsulation,
...
then propagate its hardware-assisted checksumming flags.
2001-06-12 06:16:59 +00:00
0bdd2faeed
Get the opcode mask right for almost all the Op_OE opcodes (only two were
...
correct).
2001-06-12 05:31:44 +00:00
dcb3005097
Use x_mount and x_umount.
2001-06-12 03:26:08 +00:00
1f4eee4c21
In wsfont_map_unichar: when checking that 'lo' is within 'map2' range,
...
compare 'lo', not 'hi' (only partially edited cut-n-paste it seems).
2001-06-12 00:57:10 +00:00
ba52d7a5d0
Always indirect through the "locoresw" to get the cache ops, since
...
there are just far too many combinations to handle with magic
#ifdefs in any sane way. Also, add a HitFlushDCache op to the
"locoresw", and fill it in as appropriate (it's NULL on MIPS-I,
so watch out).
These changes ensure that my R4600 Indy (with 2-way cache) gets
the correct cache ops when the kernel is built with only MIPS3
support, resulting in a kernel that is significantly more stable.
2001-06-11 23:52:38 +00:00
df452bb9b8
clean up some comments, per a request from sommerfeld
2001-06-11 22:56:26 +00:00
1825c7b68a
Move defopt FOOTBRIDGE to where it really should be in files.footbridge, which is where I should have left it.
2001-06-11 22:25:09 +00:00
ed72dec945
Remove locore dependancy on opt_netwinder and use the netwinder define from the command line.
2001-06-11 22:08:42 +00:00
8d1b187a4c
Fixed pte_print to display the correct names
...
for VME device pages.
2001-06-11 21:35:59 +00:00
6e5f704918
Now use hand-defined macros instead of relying
...
on structure layout to find registers. Added
a VME attachment.
2001-06-11 21:33:47 +00:00
33afab3251
Add a short-circuit return from wdcprobe for IDE controllers without pullup
...
resistors, which return the last value written to the bus on a read. This
makes detecting empty channels on my HCCS and D.T. Software IDE interfaces
rather faster.
2001-06-11 21:18:36 +00:00
fb2f3ce7e5
Regen; Add Level One vendor ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:13:49 +00:00
ec5280c1ed
Add Level One product ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:12:29 +00:00
0463a8a3d7
Replace magic numbers in trap code with offsetof()
...
Deal better with traps during register restore.
Explain a bit more about what's going on here.
2001-06-11 20:04:02 +00:00
bd73477f94
Parentheses around definition of PODULE_GAP.
2001-06-11 19:07:14 +00:00
95be56d2e1
Only include dependency on include-dirs if the include directory doesn't
...
exist.
2001-06-11 17:50:34 +00:00
ba4b09844f
Use command Makefile.arm. Move non-std LOADADDRESS to std.netwinder. Add
...
netwinder-specific inclusion Makefile.
2001-06-11 17:46:23 +00:00
d87a9f23c3
Add common Makefile for arm ports. Only include (for now) machine/io.h
...
if arm32 is defined. io.h is RISCPC specific and isn't needed for other
ports.
2001-06-11 17:44:38 +00:00
274629aa08
Added support for the VME `sc' SCSI board. Compiles,
...
but needs testers as the author doesn't actually have
the hardware.
2001-06-11 15:09:54 +00:00
b9e61207ff
Add nolun/nosync quirk for "IBM CDRM00201 !F"
...
See PR#13031.
2001-06-11 13:58:18 +00:00
3d85ba9ab2
include-dir: A relative 'S' is up 4-levels.
2001-06-11 13:49:28 +00:00
8b646a5273
remove IPV6FIREWALL case, which is never used
2001-06-11 13:49:18 +00:00
afd5ba073b
Defopt FOOTBRIDGE.
2001-06-11 13:48:28 +00:00
c522c18479
Use NFB from "fb.h" to include console framebuffer support.
2001-06-11 13:34:51 +00:00
bf3fad1043
Split consinit functionality out of machdep.c into platform-specific
...
files. G/c include files for machdep.c
Only include dev/cninit.c in ofw-based kernels.
2001-06-11 11:56:57 +00:00
71000126b0
The -v option actually is called -d.
...
Fixes PR 13168.
2001-06-11 11:29:22 +00:00
712d37e53b
G/C an unused parameter to isrdispatch_vectored().
2001-06-11 11:26:42 +00:00
9b0b23c664
Stack adjustment for autovectored interrupts wasn't quite right...
2001-06-11 11:24:40 +00:00
wiz