32d1d2b36a
1 pounds of coffee, 6 packs of smokes and a couple pizzas.
...
This is for backup purposes only. It works in a hacked up
user-mode setting. I have to get ddb working with amiga's to
test this any further though. I tested the main opcodes pretty
much, not too much testing on the fpu ops and it printed pflusha :^)
major externally visible changes still planned.
1994-03-04 13:44:30 +00:00
ef3c1bf7e6
Start the timeout loop *after* we've decided there is a disk there.
1994-03-04 04:15:24 +00:00
220512c2a8
De-ANSIfy. Move the timeout counter into struct disk. Remove unneeded args
...
to wd[gs]etctlr(). Other minor changes.
1994-03-04 03:43:48 +00:00
499a02a6a9
New probe for 3c579's (EISA). EISA cards still don't work but I
...
have no idea when I'll be able to work on this next.
1994-03-04 01:31:50 +00:00
c1c5482f3f
Do the right thing if the pattern has an escaped escape character followed
...
immediately by a delimiter.
1994-03-03 23:26:31 +00:00
9fc021a30e
Add a magic DELAY() in the reset sequence which causes the ITT 387 to not.
...
From Brian de Alwis.
1994-03-03 22:22:51 +00:00
2a6abdae04
netname() takes a struct in_addr, not an int. Breaks on sparc.
...
fix from Chuck Cranor <chuck@maria.wustl.edu>
1994-03-03 22:03:33 +00:00
108cc16061
Move some code, but no functional difference.
1994-03-03 20:48:16 +00:00
16d4233622
Add some comments explaining this ridiculous interface, and enable the reset
...
code by default.
1994-03-03 19:28:04 +00:00
3bf0631a5e
Flush the keyboard buffer before and after the reset. This should now work
...
on all machines and keyboards.
1994-03-03 19:11:59 +00:00
39abd30929
Don't determine byte order at run time.
...
This also "solves" the problem of GCC optimization leading to incorrect
results.
1994-03-03 17:04:03 +00:00
d16ac2d7d6
undo last change; bug was already fixed
1994-03-03 16:14:57 +00:00
34115459a4
Upload the ether address to the card after a reset, per Matt Kimmel.
1994-03-03 15:30:27 +00:00
8aee50b714
add -DDYNAMIC
1994-03-03 14:27:34 +00:00
fd0320c5dc
update to syscall.master (for sysconf)
1994-03-03 14:15:53 +00:00
d6976aca70
DoH!
1994-03-03 14:15:25 +00:00
ae535bfeb6
first cut at a SUNOS_COMPAT sysconf() system call.
1994-03-03 14:08:25 +00:00
c0cf4434ea
kbd is now a pseudo-device
1994-03-03 13:17:14 +00:00
d4bbe75640
delete unneeded printf
1994-03-03 12:23:26 +00:00
49adc2f4c2
bug fix torek sent me ages ago
1994-03-03 12:23:00 +00:00
afbbc16f69
fix rcsid
1994-03-03 12:22:04 +00:00
e592a9cb39
fix comment
1994-03-03 12:19:13 +00:00
bae64c2801
Fix from <law@snake.cs.utah.edu> to save address register # 5 when used
...
for PIC addressing.
1994-03-03 10:35:50 +00:00
a5d3e918bd
Fixes from <thomas@mathematik.uni-Bremen.de> + some minor cleanup:
...
> re-initialize for before processing each archive.
> release memory.
> get temp file creation right.
1994-03-03 10:20:06 +00:00
db651dca40
bring in limits.h
1994-03-03 03:07:24 +00:00
fa396ad402
Watch `seek complete' bit per IBM documentation. Clean up wdioctl(). Other
...
minor cleanup.
1994-03-03 01:58:21 +00:00
a6bf31a35c
undef P_tmpdir for NetBSD, because as the header says, it should be used.
1994-03-03 01:12:06 +00:00
7c687a255f
msdos filesystem now works on big-endian machines.
1994-03-03 00:51:30 +00:00
7b734f94ec
Be more careful about clearing the controller and drive active flags.
1994-03-02 23:27:13 +00:00
51a49b06ae
fix Id header
1994-03-02 23:23:04 +00:00
37135f9686
Add 8003W and 8003EB, per David Greenman.
1994-03-02 22:47:36 +00:00
21118b1bc4
Don't busy-wait for read or write completion.
1994-03-02 22:07:00 +00:00
469206981a
Fix prototype of wdintr().
1994-03-02 21:43:42 +00:00
e9326b3ba7
Make wdc_wait() do an implicit wait_for_unbusy(). Pass structure pointers
...
rahter than unit numbers where appropriate. Fix conflict if two drives have
I/O pending at the same time. Add some more sanity checks. Some other minor
cleanup.
1994-03-02 21:42:31 +00:00
da17512980
make vn driver work either way
1994-03-02 20:05:58 +00:00
442e944127
Correct handling of ST field (+some minor reformatting)
1994-03-02 19:05:20 +00:00
ae33a75671
Correct (de-)blocking in readlink
1994-03-02 19:04:29 +00:00
d80b7ef7c7
Changing the ns32000 to ns32k as used in other places.
1994-03-02 18:45:22 +00:00
81de6fa982
Increment outbound packet count, per Matt Kimmel.
1994-03-02 16:23:23 +00:00
a37cf2aecc
Make probe routines return amount of space used. Still needs some
...
work to determine difference between SB/SB-pro.
1994-03-02 16:23:10 +00:00
b1ec7fd1c9
Add an IDE drive.
1994-03-02 10:40:16 +00:00
a9e3e0dd28
Add more experimental probe gunk, not enabled.
1994-03-02 08:03:02 +00:00
04d67df50c
Add mouse gunk.
1994-03-02 08:02:27 +00:00
2292eadf37
Set the keyboard to scancode table 1 rather than having the 8042 convert.
1994-03-02 06:46:11 +00:00
ab1474a681
Remove scantokey[] and extscantokey[], as they are not used.
1994-03-02 05:44:10 +00:00
6ba1208b1d
Add code to set the translation table number, but disabled for now.
1994-03-02 04:38:26 +00:00
2542f2a4a4
Clean up deleted files.
1994-03-02 04:19:12 +00:00
165d9e602c
Fix the 790 interrupt table, per Christoph Robitschko.
1994-03-02 03:40:46 +00:00
8a2551e497
fix to misc/130, from Christos Zoulas <christos@deshaw.com>. don't do
...
stuff to the controlling tty if we don't have one!
1994-03-02 01:54:04 +00:00
6902746df6
Attempt to insure the keyboard is enabled after reset, but turn off the entire
...
reset sequence by default since it causes some keyboards to become catatonic.
1994-03-02 00:57:35 +00:00
chopps