mikel
31cff31e63
use correct name for default accounting file; from Hubert Feyrer in
...
PR bin/4063.
1997-09-01 23:32:45 +00:00
mikel
b3f39d1b48
fix typo; from Hubert Feyrer in PR bin/4070
1997-09-01 23:26:11 +00:00
is
4f1f662f6c
Fix type (_fstype vs. _filesystem); and use partition "a" on CD as default.
1997-09-01 21:16:01 +00:00
is
bf9cc7d6ed
We dont need to mention 'sd0*' any longer.
1997-09-01 19:21:46 +00:00
fair
8f86045553
add intro.4
1997-09-01 09:12:50 +00:00
fair
26e7677c8e
sun 4/400 is *not* supported yet.
1997-09-01 09:11:55 +00:00
jonathan
f6914cd0c8
Remove '#ifdef alpha' around bus_space_tag_t uses and includes.
1997-09-01 08:09:28 +00:00
jonathan
034f64c0da
Set fixtick to (1000000 % hz) when NTP is configured.
1997-09-01 08:05:05 +00:00
pk
240f9f0804
Bring db_{read,write}_bytes() prototypes in scope.
...
Move Debugger() within `#ifdef DDB'
1997-09-01 00:16:31 +00:00
perry
f7e639f48f
sync to reality
1997-08-31 23:49:15 +00:00
pk
46ac7ce9eb
Don't copy files which are no longer here.
1997-08-31 23:22:02 +00:00
pk
d4afe94f7c
Finish work-around for the re-select bug on ESP100s by dealing with
...
"illegal command" interrupt apparently caused by writing to the chip
while a re-selection is in progress.
1997-08-31 23:09:58 +00:00
pk
7d7a8e5773
Switch to MI kgdb code.
1997-08-31 21:29:16 +00:00
pk
84877e89f6
Allow a BREAK to cause a kgdb_connect().
1997-08-31 21:26:37 +00:00
pk
7950e785f9
Switch to MI kgdb code.
1997-08-31 21:22:44 +00:00
pk
2b1e7bab51
pmap_writetext(): use context 0.
1997-08-31 21:08:03 +00:00
is
7a5cd3368f
We may not open the 'a' partition here, as there are Amiga partition tables
...
without an 'a' partition. We open the RAW_PART partition instead.
Without this, a boot partition on the 'b' or later partition of such a disk
won't be found.
1997-08-31 16:33:13 +00:00
scottr
59d6043196
Do run-time determination whether to save the TC value for AV
...
Macs; this way at least those models can configure intvid0.
From Dave Huang.
1997-08-30 22:29:10 +00:00
augustss
420b75952f
Insert a sanity check so we get a panic instead of a kernel page
...
fault if the DMA map is missing.
1997-08-30 17:33:49 +00:00
augustss
7886f60e81
Make SB full duplex. Ooops, I forgot this in the last commit.
1997-08-30 10:45:32 +00:00
mycroft
8c578dc960
Pass down bus_dma_tag_t's as appropriate (per Jason's bus_dma code).
1997-08-30 06:53:57 +00:00
mycroft
d4b3029855
Set the I/O and memory enable flags for the main PCI bus.
1997-08-30 06:52:55 +00:00
mycroft
73e975d161
Pass the I/O and memory enable flags through the bridge.
1997-08-30 06:51:07 +00:00
mycroft
f77eaf96e2
Pull in new file.
1997-08-30 06:48:57 +00:00
mycroft
aae78d29c3
Don't export pci_*_find() any more.
1997-08-30 06:48:24 +00:00
mycroft
e2bb22033b
Remove pci_*_find() from here.
1997-08-30 06:47:44 +00:00
mycroft
5da739c6b8
* Rewrite pci_io_find() and pci_mem_find() using my original pci_map_io() and
...
pci_map_mem(), with appropriate changes for bus_space.
* Add extra arguments for use by pci_mapreg_*(), and make the functions
static.
* Rewrite pci_mapreg_info() and pci_mapreg_map() as wrappers around
pci_*_find(), using the documented interface.
1997-08-30 06:46:58 +00:00
cjs
ebb2301a41
Prune unused function.
1997-08-30 03:34:29 +00:00
jonathan
5342b11519
Replace copyright notice.
1997-08-30 01:51:02 +00:00
thorpej
3220411801
Define PAL_cflush, PAL_ipir, and PAL_OSF1_wrperfmon PALcode operations.
1997-08-29 23:17:37 +00:00
augustss
e72ff15736
Substantial rewrite of the SB driver to make it do full duplex on an SB16.
...
Because of the braindead design of the SB the input and output have to
use different precisions (8 and 16 bits). It is possible to set the driver
to use 8 bits on both and it will the emulate 8 bits on the output by
expanding it to 16 bits.
1997-08-29 21:41:36 +00:00
leo
42c4123e4d
Define 2 md devices.
1997-08-29 19:52:08 +00:00
leo
16bdafc3a5
Pull in Scott Reynolds' version of _splraise(). Also do a bit of typographic
...
cleanup while visting this file.
1997-08-29 19:47:52 +00:00
thorpej
417cce7c06
Fix typo(?) in dlmiss handler ("store" bit erronenously set). From
...
Kazuki Sakamoto <sakamoto@cec.co.jp>, PR #3583 .
1997-08-29 19:11:07 +00:00
gwr
2d672c5c0e
Add: nfs_bootdhcp.c nfs_bootparam.c
1997-08-29 16:29:21 +00:00
gwr
2f81e6c9c1
Supporting changes for the new BOOTP support in nfs_mountroot.
1997-08-29 16:12:49 +00:00
gwr
79c1e7ca6b
Add support for nfs_mountroot using BOOTP based on the contributions
...
of Tor Egge (closes PR kern/2351).
1997-08-29 16:10:31 +00:00
gwr
78e695f5b3
Support for RARP,RPC/bootparam moved from nfs_boot.c to here.
1997-08-29 16:07:46 +00:00
gwr
e25a1c17c1
The nfs_boot_xxx functions are declared in nfsdiskless.h
...
so remove the duplicate declarations here.
1997-08-29 16:06:41 +00:00
gwr
c74236bfc9
Tweaks to allow operation with an interface address of 0.0.0.0
...
(needed for NFS mountroot using BOOTP to get boot parameters)
1997-08-29 16:02:41 +00:00
kleink
fbc082b4e5
Tyops; from maximum entropy <entropy@tardis.bernstein.com> in PR kern/4057.
1997-08-29 10:38:02 +00:00
veego
fb559c8dc2
Add a check if sshd exists and comment out the sshd startup and the test.
...
Not everyone has a sshd on his system.
1997-08-29 10:29:07 +00:00
veego
fb251b85eb
Only start programms which we started in the previous version (1.15)
...
and also don't use the PATH with /usr/local/sbin:/usr/local/bin .
1997-08-29 10:22:24 +00:00
veego
61cf6ecccc
s/rc.func/rc.subr/
1997-08-29 10:09:38 +00:00
veego
d1307e8424
Curt, what is in rc.func ?
...
I only see rc.subr so I renamed rc.func to rc.subr.
1997-08-29 09:33:34 +00:00
veego
08b399c5ce
Add rc.subr to BIN1
1997-08-29 09:28:50 +00:00
phil
a25ce426d4
Remove the flag test when seeing if _double is zero or not. We
...
are only testing for the cvt problem, not for alternate forms.
This change makes %#e and %e both correctly print 0. It is just
a question of is it the proper number of zeros or not?
1997-08-29 05:31:11 +00:00
cjs
c3b0e18db8
Split rc.conf variables for starting programs into two: an on/off
...
switch and a set of flags. Get rid of DEFAULT flags entirely. Print
warnings if on/off switches are not set, or are set incorrectly.
Add a shell function to simplify this on/off switch testing.
1997-08-29 02:24:04 +00:00
thorpej
ff970dc9c5
Garbage-collect.
1997-08-29 00:57:54 +00:00
thorpej
0eee106cc2
Bring changes from marc-pcmcia branch down to the trunk.
1997-08-29 00:57:28 +00:00