97f422e85b
Make pmap_changebit() take bits to set and a PTE mask, rather than a bit
...
and a boolean.
1998-12-19 23:01:47 +00:00
d36a60d9cb
G/c PMAPSTATS. It's unneeded clutter right now.
1998-12-19 21:11:14 +00:00
459052a0fb
Wire down some SCSI disk units.
1998-12-19 20:05:19 +00:00
36416d8500
Added options COMPAT_LINUX and EXEC_ELF32 as comments
...
to GENERIC configuration files.
1998-12-15 19:50:00 +00:00
c05dadc113
Added COMPAT_LINUX support.
1998-12-15 19:36:36 +00:00
ebd6430388
Add some brackes to make EGCS happy.
1998-12-11 18:46:18 +00:00
59acb69be1
Add (commented out) 'gre' pseudo device line. Feedback is welcome.
...
Inspired by Klaus Klein.
1998-11-25 20:30:44 +00:00
94696a9ac3
Add support for the BUFCACHE config option.
1998-11-24 13:19:48 +00:00
db3051d720
fix problems in many d_mmap routines:
...
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
1998-11-19 15:38:20 +00:00
cf5710c839
Added a (commented out) configuration line for the RAIDframe device driver.
1998-11-16 16:44:55 +00:00
c74d32c5fc
Updating of bdev's and cdev's to support RAIDframe.
1998-11-13 04:47:03 +00:00
49c62c4336
Changes to support fork_kthread():
...
- cpu_set_kpc() now takes void *arg third argument, passed to the
entry point.
- cpu_fork() allows parent to be non-curproc iff parent is proc0.
When forking non-curproc, assume its state has already been saved.
- Adjust various pieces of machine-dependent code to account of all of this.
1998-11-11 06:41:23 +00:00
a894e3a493
Add braces to make egcs happy.
1998-11-09 15:53:51 +00:00
b296275bb4
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:09:13 +00:00
49dd2f5055
Need <sys/device.h>
1998-10-18 18:39:43 +00:00
adc5eb3a57
Fix a thinko in previous.
1998-10-18 17:15:04 +00:00
2468738337
change handling of libkern:
...
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
(for now; should depend on actual "option LKM" or -better- functions
included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
by libcompat, but not the other way
1998-10-15 18:37:13 +00:00
8bef431273
remove unused share map code from UVM:
...
- update calls to uvm_unmap_remove/uvm_unmap (mainonly boolean arg
has been removed)
1998-10-11 23:20:59 +00:00
908cdfe4e3
Add scsibus entry points to the cdevsw[].
1998-10-10 02:00:49 +00:00
d681cf055a
configure() prototype is in <sys/device.h>
1998-10-06 20:50:15 +00:00
c01f29bdf1
Sigh, we are going to have to burn a vector for Just Sigreturn again,
...
for now, until we have a more generic {get,set}context(). Update the
comment for trap #3 accordingly.
1998-10-04 23:38:55 +00:00
ed03ee06e1
Update for signal changes.
1998-10-01 08:28:30 +00:00
d15a64c38b
Adapt to signal changes.
1998-10-01 02:53:53 +00:00
8b220e1148
Define SYS_compat_13_sigreturn13.
1998-10-01 00:29:51 +00:00
bcf14a99e2
Garbage collect trap #1 and trap #2 handlers; they're moved to
...
trap_subr.s
1998-09-30 23:47:33 +00:00
1e62485c23
If !COMPAT_13, make trap #1 produce an illegal instruction. Fix the comment
...
for trap #2 to reflect that it's the trace trap.
1998-09-30 23:13:58 +00:00
a11e6632a8
Pull in opt_compat_netbsd.h
1998-09-30 23:01:28 +00:00
35d282c8d5
Make sure SYS_exit and SYS___sigreturn14 are defined. Garbage collect
...
SYS_sigreturn.
1998-09-30 22:23:13 +00:00
38084c6615
Note that trap #1 is compat_13_sigreturn, and give trap #3 to syscalls
...
which require special handling, e.g. sigreturn on m68k.
This differs from the old sigreturn trap in that we require the syscall
number to be in register d0, just like the regular syscall entry point.
This will allow sigreturn to be versioned in the future without the need
to allocate another trap vector.
1998-09-30 22:14:11 +00:00
7b15b3b56d
Minor change.
1998-09-13 12:01:41 +00:00
70e641047c
In cpu_coredump(), use MID_MACHINE rather than MID_* (whatever it expands
...
to).
1998-09-09 11:17:24 +00:00
8abe0d6b1c
Adjust for the new "reaper" kernel thread: do not free the vmspace and
...
u-area in machine-dependent code. Instead, call exit2() to schedule
the reaper to free them for us, once it is safe to do so (i.e. we are
no longer running on the dead proc's vmspace and stack).
1998-09-09 00:07:48 +00:00
c9db84ecc9
distclean is a synonym for cleandir
1998-09-05 15:15:14 +00:00
ef1837c1ad
Fix typo in previous (!UVM case, hence insignificant).
1998-09-03 12:38:31 +00:00
56c79255db
Fix typo: dbaddr_t -> db_addr_t.
1998-08-31 19:20:17 +00:00
70b6acd9df
Use NFS_BOOT_BOOTPARAMS until we change the boot program to use DHCP
1998-08-28 04:56:15 +00:00
a6d3fb3799
vm_offset_t -> {paddr_t,vaddr_t}, vm_size_t -> vsize_t
1998-08-20 08:33:41 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
3e2efa4365
Fix a prototype tyop spotted by Bill Studenmund: s/clnintr/clnlintr/
1998-08-12 06:46:57 +00:00
005ae749a7
Oops, make a sentence added in previous commit parseable.
1998-08-02 19:42:35 +00:00
3ff8e6493a
Don't cast the null residual pointer passed to vn_rdwr().
1998-07-28 18:34:52 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
e99bc6379d
Don't deref a NULL tty pointer in the interrupt routine. This can happen
...
if we're the serial console, we have not yet been open'd, and we get an
interrupt for one reason or another.
1998-07-20 17:35:17 +00:00
e641acf153
In configure(), initialize the HIL driver's software state before enabling
...
interrupts; if there's an interrupt pending (i.e. because the user pressed
a key or moved his mice while the kernel was being loaded), the interrupt
handler may safely be run. Fixes PR port-hp300/5397.
1998-07-20 10:47:50 +00:00
d681d158c7
Remove the raw HYPERchannel kludge.
1998-07-15 17:45:52 +00:00
1b46ebe1d9
Add elf_machdep.h to the INCS list.
1998-07-12 17:53:29 +00:00
639cc899cf
Basic elf_machdep.h for m68k; doesn't include relocations, yet.
1998-07-12 01:17:58 +00:00
1ea93eea1c
Define one page free list, and put all pages on it.
1998-07-08 04:35:23 +00:00
4220ffab81
Loop until all netisrs are consumed; netisrs processed down the list might
...
cause additional netisrs to be scheduled.
1998-07-07 18:27:13 +00:00
3472ba67bb
* defopt COMPAT_{09,10,11,12,13} and COMPAT_NOMID (from unsaved buffers).
...
TODO: revisit interaction between native compat and emul compat usage.
1998-07-05 18:27:18 +00:00
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
5c0c5dd0b4
defopt ISO TPIP.
1998-07-05 04:37:35 +00:00
8db0fcdbf7
defopt CCITT.
1998-07-05 02:12:22 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
e9b40e3d85
Dont' check sysflags here... just look for NHPIB or IHPIB device IDs.
1998-07-01 22:47:12 +00:00
a1e53914d7
If sysflags tells us we have an internal HP-IB interface, don't bother
...
reading the DIO device ID at select code 7, but rather hard-wire the ID
to the IHPIB ID. This prevents us reading what might look like a valid
ID to another device when IHPIB is present. (IHPIB doesn't always return
a correct device ID, grumble.)
1998-07-01 22:46:29 +00:00
b6d050ef0f
Make use the `end' consistent.
1998-07-01 06:05:18 +00:00
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
37b378d836
defopt COMPAT_HPUX
1998-06-25 23:56:39 +00:00
8aee7782f5
defopt COMPAT_SUNOS
1998-06-25 23:40:33 +00:00
971b8956ef
defopt KTRACE
1998-06-25 21:18:11 +00:00
10370475a3
In device_register(), explicitly initialize a static local variable
...
(seen_netdevice) with 0.
1998-06-17 13:08:47 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
00ede2160e
Change ddb_init() for a.out to provision for kernels which are not booted by
...
the current 'bootblock' method, like the Shark, which preloads and preformats
the symbol table right in the boot code.
1998-06-09 01:57:41 +00:00
c1ca72eaf8
Build pmap_boostrap.o without profiling; we can't call mcount before the
...
mmu is enabled!
1998-05-31 23:18:57 +00:00
92d8ae0ee3
Specify a non-profiling C rule.
1998-05-31 23:18:05 +00:00
019443d82c
Profiling version of the BASALT kernel.
1998-05-30 17:56:08 +00:00
47391e90cb
Sync with mac68k: correct some errors if building a kernel with DEBUG.
1998-05-27 05:58:40 +00:00
7a0f63f982
Back out the defopt for M680?0. As pointed out to me, this breaks ports which
...
dont use the M680?0 the way Amiga, Atari, Mac68k, and X68k do. I must have
missed this in the past discussion about this project.
1998-05-24 19:32:34 +00:00
6a6812fd92
Move M680[2346]0 to opt_m68kcpu.h.
...
XXX Some explicit dependencies could be removed now from the individual
arch/$ARCH/conf/Makefile.$ARCH files, but this is still to be done.
1998-05-23 20:51:06 +00:00
6626878e7b
It is no longer necessary for pmap_pinit() and pmap_release() to be
...
pmap interface functions, as NetBSD no longer uses statically allocated
pmaps (except for the kernel pmap, which is special-cased anyhow).
1998-05-19 19:00:11 +00:00
a0872a3916
duh. need SYSV* stuff.
1998-05-19 15:20:40 +00:00
3e08a4a027
Spell `interrupt' correctly.
1998-05-18 17:37:38 +00:00
96ee790741
Add the HP35470A DAT drive.
1998-05-17 17:09:55 +00:00
687ea7404c
Fix some arithmetics lossage on typeless pointers.
1998-05-08 16:55:15 +00:00
aa36ad1f55
Fix some arithmetics lossage on typeless pointers.
1998-05-07 21:01:41 +00:00
09175fe9f8
options UVM no longer needed; it's standard
1998-05-04 05:01:55 +00:00
d1f4011d1d
Switch to UVM.
1998-05-04 05:01:30 +00:00
61665b7bc6
TCP_CWM option doesn't exist anymore; it's all run-time.
1998-05-01 05:24:34 +00:00
80c08c1784
Turn off TCP_COMPAT_42, turn on TCP_CWM.
1998-04-29 04:57:49 +00:00
4804060a6b
GC the old MACHINE_NONCONTIG code.
1998-04-26 21:24:27 +00:00
863ece9212
egcs warning: don't use a char for array index, cast it to int.
1998-04-20 20:41:05 +00:00
b21bfbde11
Add -Wno-main conditional on compiler being gcc 2.8 or egcs. (This adds
...
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)
1998-04-12 23:47:41 +00:00
f1821c7811
Adjust for recent ttyopen() and dialout device changes.
1998-03-28 23:49:06 +00:00
2f2b4dae56
Optimize some cycles out of the clock interrupt handler when
...
USE_LEDS is defined.
1998-03-21 08:05:37 +00:00
727b8bc7ac
Charles Hannum pointed out that if a clock interrupt was posted while
...
we were in ledcontrol(), the heartbeat twinkler would just punt on
updating the LED even though it had already updated the status. (This
was broken in v1.73 of locore.s).
Rather than resurrect the old code, simplify ledcontrol() and don't
bother with mutual exclusion. As mentioned by the comments describing
this function, we really don't need to be that precise. We do, however,
want to guarantee instructions that modify the status variable directly,
so the function is now primarily inline assembly.
1998-03-21 07:45:59 +00:00
9f50fca1fd
Add commented out "options FFS_EI"
1998-03-18 16:34:41 +00:00
7ff7b02fac
allow LDSTATIC definition to be overridden by bsd.own.mk/mk.conf
1998-03-02 20:01:05 +00:00
5ec2d93c1e
Fix a typo.
1998-02-27 19:13:04 +00:00
1ed8ea9966
note second parm of sysarch() is now void *, + trivial KNF, etc.
1998-02-25 21:41:55 +00:00
89d112dd92
Switch this kernel to UVM.
1998-02-24 11:05:37 +00:00
7027d87a18
Duh! Use uvm_km_valloc_wait(), NOT uvm_km_zalloc() to allocate user page
...
tables. (Thanks for pointing that out, Chuck!)
1998-02-24 07:42:05 +00:00
772da350d4
Disable the message buffer during crash dumps by clearing msgbufenabled,
...
not msgbufmapped.
1998-02-19 04:18:30 +00:00
3bbb7f7d45
Move pmap_map() function definition to MD headers, as appropriate. It's
...
an internal function, and the VM system shouldn't try to prototype it.
(Note that some ports _don't_ prototype it.)
1998-02-18 02:05:32 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
65e20aa9a8
Add first-cut support for UVM. NOTE! User page table allocation does not
...
currently work with UVM in this pmap! This is due to a bug in the interaction
between kernel_object and submaps which will be addressed shortly.
1998-02-16 21:01:39 +00:00
d8f3ddff17
Add support for UVM.
1998-02-16 20:54:51 +00:00
f49dd3ef30
Avoid declaring the "astpending" and "want_resched" globals in cpu.h,
...
as this breaks C++ code that happens to indirectly include this header.
Both Matthias Scheler and I noticed this, independently.
This problem notably does not affect the atari and sun3/sun3x ports,
which have already implemented a similar solution.
1998-02-13 07:41:45 +00:00
223caea788
pmap_page_index() is not used in the MACHINE_NEW_NONCONTIG case.
1998-02-08 18:47:06 +00:00
2f55a48f5c
Implement MACHINE_NEW_NONCONTIG and switch the hp300 port to use it.
1998-02-08 18:37:55 +00:00
b5c132e4d2
Prototype __flt_rounds() consistently.
1998-02-03 01:26:20 +00:00
b3fa451227
Amiga uses the common m68k/sig_machdep.c now. Also moved its definition from
...
the other 68k ports' files.${port} to arch/m68k/conf/files.m68k.
1998-02-01 21:23:24 +00:00
3a83745247
In some hp300-derived pmaps, in pmap_page_protect(), don't walk off the
...
end of the list of physical->virtual entires into NULL space if the last
entry is (mysteriously) wired in the pmap. Add a DEBUG printf on alpha.
1998-01-31 01:32:55 +00:00
15ae963bea
When dumping, print out the device number as major,minor.
1998-01-24 16:46:23 +00:00
871cf5e7ce
Update for changes to config.
1998-01-12 18:30:41 +00:00
1ac3d5db35
Put SPU options in opt_spuconf.h, add device classes.
1998-01-12 18:29:48 +00:00
1ef77e68aa
Oops, fix a printf format.
1998-01-11 23:16:04 +00:00
f522bda243
Convert the hp300 LANCE driver to use bus.h
1998-01-11 21:57:02 +00:00
5021043b13
ia->ia_addr is of type `bus_addr_t'.
1998-01-11 21:56:13 +00:00
582d47fcf0
ia->ia_addr is a physical address, not a kernel virtual address.
1998-01-11 21:55:08 +00:00
1687835b3e
Pass down bus space tags to children, and use types appropriate for
...
bus.h.
1998-01-11 21:53:04 +00:00
774d66001e
Add bus_space.c
1998-01-11 21:42:44 +00:00
77706becd7
Initial implementation of bus_space functions for hp300. Some cleanup
...
of this will be possible once some pmap changes are made.
1998-01-11 21:40:52 +00:00
b69358e4ca
bus.h for the hp300 port. Only supports bus_space for now.
1998-01-11 21:26:04 +00:00
6f57e5c573
multiple include protect machine/limits.h, fixes pr 4473 (from Mika Nystrom)
1998-01-09 22:23:44 +00:00
4deb927ee6
Regen.
1998-01-09 06:59:27 +00:00
2f3e61a54a
Put RCS IDs into generated files, in the correct place.
1998-01-09 06:59:10 +00:00
c4a3ed1697
Regen: Back out RCS ID related changes.
1998-01-08 01:02:05 +00:00
ddb3a0e478
Back out RCS ID related changes.
1998-01-08 01:01:27 +00:00
6ac24f05df
Garbage-collect VM_PMAP.
1998-01-06 08:46:11 +00:00
2317f9064e
Garbage-collect pm_stchanged.
1998-01-06 08:40:50 +00:00
07f835de1f
Garbage-collect PMAP_ACTIVATE() call here; it's no longer necessary.
1998-01-06 07:49:36 +00:00
61567b54de
Garbage-collect pm_stchanged; it's not used by anything.
1998-01-06 07:02:58 +00:00
d11b109f2b
Garbage-collect use of the PCB's copy of the user segment table pointer.
1998-01-06 06:51:40 +00:00
a8f80ad4fd
Fix a bogosity apparently inherited from when the Utah 4.3BSD code base
...
was converted to use Mach VM for Net2/4.4BSD. The user segment table
pointer was originally stored in the PCB. When Mach VM came along,
however, it was also stored in the pmap, and loaded into the PCB in
pmap_activate(). pmap_activate() would then note that the PCB's USTP
was now in sync with the pmap's USTP, and the low-level context switch
code would use the value from the PCB.
However, pmap_activate() would also load the hardware MMU context if
the pmap was the current pmap (or, in the case where pmaps can be shared,
such as in NetBSD, if the proc was the current proc). The low-level
context switch code would then reload the hardware _again_ using the
USTP from the PCB.
However, the optimization of not calling pmap_activate() if "stchanged"
was false ended up causing some processes to use stale USTP values from
the PCB when the low-level context switch code reloaded the hardware!
This was noticed by using a real vfork(2) (which worked for some time
before failing, surprisingly!)
Since I'm hard pressed to find any real optimization here (since the
hardware was always reloaded once, sometimes twice!), the code now always
calls pmap_activate(), which uses the correct USTP value (the one in the
pmap). The PCB's USTP is now ignored, and should eventually be g/c'd.
Another optimization can actually be performed, and I have added a comment
describing what it is, but have not yet implemented it.
Also note that most of the loadustp() functions where actually incomplete.
This has been corrected. These functions should probably be split up into
MMU-specific operations, and called indirectly, rather than doing constant
run-time decision making based on values that will never change during the
course of a boot's lifetime.
1998-01-05 23:16:21 +00:00
086015d681
RCSID Police.
1998-01-05 21:13:51 +00:00
e464358f5f
make script insert RCS ids into generated files
1998-01-05 21:12:34 +00:00
3e0fad1868
RCSID Police.
1998-01-05 06:28:44 +00:00
b9f1b716f3
Now that all ports have pmap_activate(), and it has an identical interface,
...
prototype it in <vm/pmap.h>
1998-01-03 01:12:59 +00:00
dd966fca05
Change an argument name to PMAP_ACTIVATE() to more accurately describe the
...
semantics of the argument.
1998-01-01 20:05:23 +00:00
9c20093835
Make pmap_activate() and pmap_deactivate() take a struct proc *.
1997-12-31 10:12:55 +00:00
fa1347ed5b
Prompt for total sectors, and calculate sane defaults for sectors per
...
cylinder and total sectors.
1997-12-29 07:15:10 +00:00
89b10b928f
Do better reporting of transmit errors.
1997-12-26 22:37:05 +00:00
ff7a4d0472
Add COMPAT_13.
1997-12-22 05:31:23 +00:00
6563f769af
update for correct SPU type and COMPAT_13.
1997-12-21 17:15:01 +00:00
a5252fc287
Fill out more file system information, from Havard Eidnes, and hacked a bit
...
by me.
1997-12-15 23:17:19 +00:00
0a558b3f1f
Standardize COMPAT_SUNOS -- remove all references to
...
sunos_exec_aout_makecmds() in machdep.c for various architectures and put
it in exec_conf.c like the other emulations; rename exec.h to
sunos_exec.h.
1997-12-04 15:33:17 +00:00
c87631771e
Add COMPAT_13.
1997-12-01 14:52:51 +00:00
315f8de9c2
add pseudo-device rnd, commented out
1997-11-20 08:11:14 +00:00
6c986561ee
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:57:23 +00:00
8b485c5962
Add a missing #if NARP > 0 around arpintr(); and add a #include "arp.h"
...
for NARP. This is for the 'new' arp system.
1997-11-13 10:43:06 +00:00
ce4c770f88
Make sure CPP, AR, AS, and RANLIB are defined.
1997-11-12 23:11:50 +00:00
a421995756
Define LORDER, NM, and TSORT here, like we do the rest of the tools.
1997-11-12 22:25:31 +00:00
ff83727926
All hail HAYDON!
1997-11-02 21:01:28 +00:00
a16fd7d74e
Make these compile after m68k/m68k.h 1.4->1.5.
1997-10-26 21:41:34 +00:00
d383eb0134
Make this compile again. From Dave Carrel.
1997-10-17 18:45:55 +00:00
254067068a
include vm/vm.h
...
move include of sysctl.h after vm.h
1997-10-16 18:16:08 +00:00
a1e0fcf246
Remove unneeded and incomplete includes of vm/vm_*.h
1997-10-16 18:02:19 +00:00
80513cb5ae
o Make usage of /dev/random dependant on
...
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
1997-10-13 00:46:08 +00:00
4dd0bf9d01
- Consolidate some pre-main initialization into an hp300_init() function.
...
- Initialize the message buffer earlier, in hp300_init(), rather than in
cpu_startup(), so that it's initialized before main() is called.
1997-10-12 18:47:51 +00:00
c3637caf77
Consolidate some pre-main initialization into an hp300_init() function.
1997-10-12 18:45:48 +00:00
f53f16dd2e
Move the prototype of hp300_calibrate_delay() to cpu.h
1997-10-12 18:37:56 +00:00
116fe63c4e
Remove extern declaration of devioc[].
1997-10-12 17:53:46 +00:00
a7aef46287
Use m68k/Makefile.inc.
1997-10-11 09:11:17 +00:00
5c8d588138
Nuke NOOBJ.
1997-10-11 08:44:42 +00:00
acf0e569a5
Update all the tags goo, and use bsd.subdir.mk.
1997-10-11 08:42:02 +00:00
017e6c7f10
Address PR 4120 by synchronizing v{,un}mapbuf() with the i386 vm_machdep.c,
...
v 1.27, pulling in changes made there by Charles Hannum. Also, incorporate
a few tweaks made by Gordon W. Ross in the sun3 version of this change.
1997-10-11 06:38:45 +00:00
4c9d6e4d9c
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 08:58:45 +00:00
1bcecdd613
Fix tipo inherited from old version of TNF copyright template.
1997-10-09 08:48:33 +00:00
6d72f0f99f
Recognize sunos binaries
1997-10-05 02:15:48 +00:00
3f5b21562b
Add missing definition needed for COMPAT_SUNOS
1997-10-05 02:12:52 +00:00
cb48a4a7e4
Bring sunos compat files in when COMPAT_SUNOS defined
1997-10-05 02:11:21 +00:00
030188061e
Copyright assigned to The NetBSD Foundation.
1997-10-04 17:36:56 +00:00
608283bedd
Copyright assigned to The NetBSD Foundation.
1997-10-04 17:22:49 +00:00
9e6a3b705f
Copyright assigned to The NetBSD Foundation.
1997-10-04 17:20:15 +00:00
bb0b21705d
Copyright assigned to The NetBSD Foundation.
1997-10-04 17:03:09 +00:00
2d397943d4
Copyright assigned to The NetBSD Foundation.
1997-10-04 09:59:35 +00:00
7d508b124f
define SIZE?=size, and use ${SIZE} instead of size. makes cross
...
compilation easier
1997-10-03 07:17:00 +00:00
6eb0c3077a
Remove duplicate inclusion of <sys/device.h>.
1997-10-01 16:28:22 +00:00
3996b53189
PR/4162: Chris Jones: make cleandir does not work properly; it does not
...
remove the object files and the .depend file in the kernel build directory.
1997-09-30 22:39:49 +00:00
376e3e6e34
Glue in memory_disk_hooks.
1997-09-21 22:53:03 +00:00
585f46558e
Add support for mounting a memory disk as the root device.
1997-09-21 22:51:29 +00:00
c6ff44d7a1
Add support for the memory disk device.
1997-09-21 22:44:46 +00:00
c5ba7a3102
Move the definition of MSGBUFSIZE up to the machine-arch level if
...
possible. Pointed out by Bernd Ernesti.
1997-09-20 12:06:37 +00:00
d4713d24c2
Implement the kernel part of pr-1891. This allows for a more flexible sized
...
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
1997-09-19 13:52:37 +00:00
a9155c5057
Set the status word as well, and remove a bogus comment.
1997-09-12 10:29:20 +00:00
cd9a968cb7
Fix a test that should be on fputype rather than cputype.
1997-09-12 08:41:55 +00:00
8a42aeac7b
GC old comment.
1997-09-12 08:35:15 +00:00
55582e5bc2
The FPCOPROC option no longer exists.
1997-09-12 08:04:12 +00:00
895a1eced4
Fix an error from when Locore.c was removed.
1997-09-12 07:56:37 +00:00
982f24e698
Always initialize all registers in setregs().
1997-09-12 07:00:30 +00:00
42c101eb00
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-12 05:48:08 +00:00
16a8787248
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-11 23:01:44 +00:00
6ac7f6248f
add a before tab to SCSIVERBOSE
1997-08-23 19:16:06 +00:00
4cb1ba2dac
Make this compile again when we only specify a machine with the
...
HP MMU (320, 350).
1997-08-21 18:12:34 +00:00
1a7afa3853
add commented out reference SCSIVERBOSE option
1997-08-20 18:38:13 +00:00
af6b181686
Fix typo in getting the 040 access fault address, noticed by
...
Allen Briggs in the mac68k locore.s
1997-08-18 17:52:48 +00:00
0755be1f84
Use optimized _splraise() implementation, from mac68k/intr.h
1997-07-24 05:43:08 +00:00
bdb232d2b6
Don't use <lib/libsa/if_ether.h> anymore. This was a copy of the
...
old (before ARP changes) <netinet/if_ether.h>, intended for
temporary use.
1997-07-22 17:41:01 +00:00
ac7da90b83
Remove old *_UNK style default defines, use standard names from locators.h.
...
Missed in "locators.h" cleanup; reported by Thorsten Frueauf in PR 3906.
1997-07-22 15:20:20 +00:00
73997cc33d
Add missing `#include "locators.h"' from last commit.
1997-07-19 11:19:05 +00:00
7be59a897b
remove old *_UNK style default defines, use standard names from locators.h
1997-07-18 03:38:33 +00:00
ca1bba150a
use locator defines in "locators.h" to index cf_loc[]
1997-07-17 03:16:39 +00:00
9ed3ea9ab3
use locator defines in "locators.h" to index cf_loc[]
...
still to be done and/or decided not to be done: replace all *UNK uses in
hpib code with the native names from locators.h
1997-07-17 01:59:12 +00:00
e296b3b344
New bus error/address error trap handlers, code lifted from mac68k
...
port, which is lifted from amiga port, plus some changes from me:
- Add support for the HP MMU to the 020/030 bus/address error handler
(mostly lifted wholesale from the old code).
- Rename addrerr and buserr to busaddrerr2030. The new name reflects that
these functions are specific to the 68020 and 68030, and that the same
handler function is used for both vectors.
The vector table is patched once we know our CPU type, before the MMU
is enabled. In the event that we're running on a CPU that we're not
configured for, simply invoke the PROM's "reboot request"; we have no
hope of running in the event of a config botch, since we need working
a working bus error handler for console initialization.
These new functions optimze for common-case page faults, eliminate
many run-time checks, and are sharable.
1997-07-14 19:18:31 +00:00
198bd713f2
Generate assym.h dependencies when making 'depend'.
1997-07-12 22:07:36 +00:00
ad1710ce1e
update comment from 1981 on memory and disk prices -- pr-2754 from Curt Sampson
1997-07-12 16:18:36 +00:00
49324f585c
Remove misplaced/unnecessary VM #include cruft; from Thorsten Frueauf
...
<frueauf@ira.uka.de> in PR port-hp300/3851.
1997-07-10 18:14:08 +00:00
1c599835b4
Restore the defines of UPAGES and NPTEPG.
1997-07-10 08:22:36 +00:00
96914606be
From sun3:
...
Correct handling for Trap #2 in SunOS executables,
now that we know it is supposed to flush the cache.
(Was thought to be "some obscure FPU operation".)
1997-07-08 16:56:31 +00:00
b1d65b1d3f
Adjust start address here, now that exec() no longer does it for us.
1997-06-28 07:20:25 +00:00
ee8581a255
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:44:03 +00:00
552af779d2
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:46:19 +00:00
dc6a98e92c
bring mrg-vm-swap2 onto mainilne.
1997-06-12 15:09:23 +00:00
a10178c21e
GC this file. It has been unused for quite a while.
1997-06-11 08:42:31 +00:00
be611a44d5
The 'Mach derived conversion macros' are now in <m68k/param.h>
1997-06-10 18:59:12 +00:00
323d575e58
s/hp300_btop/m68k_btop/
1997-06-10 18:58:19 +00:00
3360f97707
s/hp300_round_page/m68k_round_page/ s/hp300_trunc_page/m68k_trunc_page/
...
s/hp300_btop/m68k_btop/ s/hp300_ptob/m68k_ptob/
1997-06-10 18:56:50 +00:00
a969a4b6f6
s/hp300_trunc_page/m68k_trunc_page/ s/hp300_ptob/m68k_ptob/
1997-06-10 18:52:23 +00:00
6a57e397b7
s/hp300_btop/m68k_btop/
1997-06-10 18:51:31 +00:00
fb53429628
s/hp300_round_page/m68k_round_page/ s/hp300_trunc_page/m68k_trunc_page/
1997-06-10 18:49:35 +00:00
f1d4880cb5
s/hp300_trunc_page/m68k_trunc_page/
1997-06-10 18:48:47 +00:00
931d90fcee
Use the MI <m68k/param.h> include.
1997-06-10 07:54:35 +00:00
a204fb7981
Initialize machine from MACHINE.
1997-06-08 23:54:19 +00:00
cad3c2f3f0
Garbage-collected long-unused setredzone().
1997-05-26 00:27:43 +00:00
a078a4be55
Fix lossage from the latest vm_pmap changes.
1997-05-19 10:14:47 +00:00
2dc79e5c4b
Link this program statically.
1997-05-14 07:57:13 +00:00
a8af683eb9
Eliminate references to vmspace.vm_pmap
1997-05-13 18:00:49 +00:00
4d989c06dd
Add the following drivers:
...
- frodo at intio
- dnkbd at frodo (commented out until integrated)
- apci at frodo
1997-05-12 08:24:56 +00:00
f8337a2c14
Add apci driver glue.
1997-05-12 08:23:28 +00:00
286b3b171d
Add glue for APCI driver at cdev minor #31 and in console switch.
1997-05-12 08:17:53 +00:00
6cc1022d84
Garbage-collect an unneeded definition.
1997-05-12 08:14:01 +00:00
a492e1df80
Add a kernel driver for the APCI 8250-like UARTs that live in the
...
Frodo ASIC, originally contributed by Mike Smith
<mike@pressed.spam.frisbee.net.au>, but reworked by me to:
- Essentially duplicate the dca driver, modifiying where necessary
to work with the APCI.
- Deal with the different Frodo autoconfiguration model.
- Don't attach a tty to the 0th UART - it's not really useful for much
more than the Domain keyboard.
- Added a routine to check for the existence of a DCA at select code 9.
On most models, the 1'th UART is mapped to select code 9 by the PROM,
and on these models, we do _NOT_ want to attach the device as an APCI.
However, on the 425e, this mapping does not take place, so we attach
as an APCI. The 2'th and 3'th UARTs always get tty instances.
- Add console support which will only be invoked on the 425e (i.e. check
for DCA at 9, and defer console to it if it exists).
1997-05-12 08:12:36 +00:00
a155715d44
Add a driver for the Apollo Utility Chip (a.k.a. "frodo"), contributed
...
by Mike Smith <mike@pressed.spam.frisbee.net.au>, with some changes to
the autoconfiguration model and slight changes to the interrupt glue
by me.
1997-05-12 08:03:48 +00:00
2392fb2a1c
Bump version: Added APCI console support
1997-05-12 07:58:08 +00:00
83c63bd2de
- Always build a romout() stub.
...
- If kbdnmi() returns, stop cold, since it shouldn't.
1997-05-12 07:56:00 +00:00
f39885279b
- Define INTIOBASE here for use by the standalone programs.
...
- Add some extern's for "userom" and romputchar()
1997-05-12 07:54:45 +00:00
4e0ee78444
- Always build the romputchar() glue.
...
- Don't set "userom" in the trap handler (we didn't before, but we've
removed the previous CPP conditional that was used to enable it.)
1997-05-12 07:53:02 +00:00
eac0352a9e
In kbdnmi(), after we have cleared the interrupt condition, reset
...
the machine, rather than simply returning to the assembly NMI handler.
Previously, the assembly handler would simply jump back to begin:, which
would frob the stack, and re-clear the BSS. However, this is not sufficient,
as there may be state in initialized data that must be restored. Thus,
the only reasonable solution is to re-load the boot block.
1997-05-12 07:51:32 +00:00
c25bfe1365
Don't use hardcoded hex for the address of the internal HP-IB interface.
...
Instead, use definitions from <hp300/dev/dioreg.h>
1997-05-12 07:48:23 +00:00
82ae3a106e
Don't use a hard-coded hex address for the 0'th APCI port; use definitions
...
from <hp300/dev/frodoreg.h>
1997-05-12 07:47:03 +00:00
0c5b002449
Add prototypes for standalone APCI driver.
1997-05-12 07:45:41 +00:00
05333d3fa5
- Add glue for standalone APCI console driver.
...
- Make the romputchar() useage conditional only on "userom".
1997-05-12 07:44:53 +00:00
225fbfa100
Build the standalone APCI driver.
1997-05-12 07:43:18 +00:00
bbbc6052c1
Add a standalone APCI driver, adapted from the standalone DCA driver
...
by me. This driver should only be invoked when there are no other
suitable console devices present in the system. This situation currently
exists on the 425e, for which we do not have a frame buffer driver,
and who's PROM does not map the second APCI UART to select code 9,
like is done on the 4{00,25,33}{t,s}.
1997-05-12 07:41:55 +00:00
cc4a1553a1
Eliminate bogus redefinitions of standard targets.
1997-05-09 07:50:03 +00:00
84bca5d679
Don't use _SUBDIRUSE outside of bsd.subdir.mk.
1997-05-07 17:28:47 +00:00
7f69a90075
whitespacos i missed
1997-05-07 00:29:18 +00:00
3490941ddb
cleanup unecessary quotage of options
1997-05-07 00:27:33 +00:00
4abf5a1a72
be consistent with use of spaces and tabs.
...
don't need quotes around options with _'s in the name
1997-05-06 00:56:53 +00:00
3a12db07c6
Update for USELEDS changes (including: garbage-collect LED frobbing
...
code; it has moved to leds.c)
1997-05-05 21:15:41 +00:00
500498e411
Update for USELEDS changes.
1997-05-05 21:14:04 +00:00
e677b62290
Garbage-collect LED-related stuff.
1997-05-05 21:12:49 +00:00
aec958ddf3
Don't initialize the DMA controller here.
1997-05-05 21:11:59 +00:00
95bae625a2
Update for USELEDS changes.
1997-05-05 21:09:13 +00:00
9c8fdf3dad
Use dio_intr_establish().
1997-05-05 21:08:26 +00:00
9eddfbfca3
Update for USELEDS changes.
1997-05-05 21:07:31 +00:00
ff163c6424
Use dio_intr_establish().
1997-05-05 21:06:41 +00:00
thorpej