2 reasons:
-no need to keep a list of all known parts
-there is at least 1 bridge (ACC micro 2051) which reports the same
device ID for its various subfunctions; this would require an additional
check in the match function
(keep the old list inside #if 0 in case one of the historical bridges
doesn't report the right class/subclass - I can't check them all)
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
display. The display now looks like this:
bishop:thorpej 35$ obj.alpha/ifconfig -m fxp0
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet autoselect (100baseTX full-duplex)
status: active
supported Ethernet media:
media autoselect
media 100baseTX mediaopt full-duplex
media 100baseTX
media 10baseT mediaopt full-duplex
media 10baseT
media 100baseTX mediaopt loopback
inet 129.99.50.41 netmask 0xffffff00 broadcast 129.99.50.255
bishop:thorpej 36$
The intent here is to allow cut'n'pasting of the output to a command
line, or allow easier automatic extraction from scripts, etc.
XXX Still at issue is what to do about non-0 media instances.
fix last two fixes one more time, this time dealing with ugly
prototype issues, including the fact that the bcopy returns nothing,
but memcpy returns a void *. Never mind that we don't use it...
This was semi-nontrivial, since a function pointer to bcopy gets used
in this file.
Note #1: The catchpacket routine, which takes a function pointer to
bpf_mcpy or memcpy, should probably be converted to take a
flag that just says which is used, so memcpy can be inlined.
Note #2: The code is heavily #ifdef'ed to run on older operating
systems. We probably want to clean that cruft out, unless
someone is planning a new release of the code at LBL (doubtful.)
data structure is used, but a much saner matching mechanism is used, one
which allows greater ease in adding new types.
Also, rewrite the way media words are displayed. The status display now
looks like this:
bishop:thorpej 137$ ifconfig -m fxp0
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet autoselect (10baseT)
status: active
supported media:
Ethernet autoselect
Ethernet 100baseTX <full-duplex>
Ethernet 100baseTX
Ethernet 10baseT <full-duplex>
Ethernet 10baseT
Ethernet 100baseTX <loopback>
inet 129.99.50.41 netmask 0xffffff00 broadcast 129.99.50.255
bishop:thorpej 138$
This makes it more clear which media type (e.g. Ethernet) is currently
in-use, handy for devices such as the TI ThunderLAN which can also have
both Ethernet and Token Ring PHYs attached.
kleink