This makes autonegotiation on rlphy(4) at re(4)
on landisk (8139C+) select 100baseTX full-duplex
at boot time (before first ifconfig) properly,
and there is no bad side effect on rlphy(4) at nfe(4).
This may also fix PR kern/34109.
> - Don't set MIIF_NOISOLATE so rgephy(4) can be used in configurations
> with multiple PHYs and un-comment case IFM_NONE in case MII_MEDIACHG
> rgephy_service(). There doesn't seem to be a problem with isolating
> RTL8169S and their internal PHY.
and rev 1.12:
> - Fix some spelling in comments.
> - Remove superfluous returns at the end of void functions.
> - Remove unused static global rgephy_mii_model.
- remove #ifdef'ed out code whcih has also been removed in FreeBSD
- some style cosmetics
- set RGEPHY_1000CTL_AHD in rge_reset()
- reset RGEPHY_MII_BMCR register in rge_reset() too
While here, use proper macro rather than magic numbers for
ANAR and BMCR registers there.
Revision 1.9:
> Make the rgephy driver advertise both 1000_FD and 1000_HD bits in
> autoneg mode. A couple of the devices don't autoneg correctly unless
> configured this way.
Revision 1.11:
> Due to the poor PHY documentation from RealTek I can't sure but I
> think the RealTek PHY needs driver to set RGEPHY_BMCR_AUTOEN bit of
> RGEPHY_MII_BMCR register and proper ANAR register setting for manual
> media type selection.
> This fixes long standing manual media type selection bug in rgephy(4).
newer server chipsets) to wm(4), from the FreeBSD em(4) driver.
While there, add a few other Intel Ethernet controller that should work as
is.
Properly update the RX error and TX collision counters.
Add ikphy(4), a driver for the Intel i82563 Kumeran 10/100/1000 Ethernet PHYs
Sam Leffler, used in various products including AR5312-based designs. This
is not enabled in any configs yet, nor tested by anyone other than Sam. I
will be testing this more later, and adding it to appropriate configs once
I have verified (unless someone else beats me to the punch.)
as Broadcom/Serverworks HT-2000). Following the Broadcom-supplied
Linux driver, update brgphy.c to treat the bcm5780 integral copper PHY
just like the 5714/5715 PHY.
For NetBSB-3 pullup purposes, this commit includes:
src/sys/dev/mii/miidevs revision: 1.65 -> 1.66
src/sys/dev/mii/brgphy.c revision: 1.26 -> 1.27
plus a regen of src/sys/dev/mii/{miidevs.h,miidevs_data.h}.
We need to special case ciphy to ask for RGMII interface at 2.5V for nfe.
This makes Cicada/Vitesse PHYs attached to nfe work.
Many thanks to Bill Paul for diagnosing the problem and suggesting a solution.
