18e2c3aaad
Add a maintenance note. Minor change in some logic in the DMA mapping.
2000-08-14 06:58:45 +00:00
23830f1e6c
- Check CR_RST rather than ISR_TXRCMP and ISR_RXRCMP in sip_reset()
...
- Add more delay after reset
- "Big endian mode" on SiS 900 seems broken so don't enable it;
use htole32()/le32toh() instead
- Don't cast u_int16_t array to u_int8_t pointer
- Add some delay() to FILTER_EMIT macro in sip_set_filter()
Now SiS 900 works on my macppc.
2000-08-12 07:38:40 +00:00
363910c22b
s/Toshiba America Info Systems/Toshiba/ since they are the main PCI issuer.
...
Add new version of the Oboe FIR device.
2000-08-10 01:55:57 +00:00
a1b037bc3a
recognize the i440MX mobile chipset's IDE interface
2000-08-09 13:23:07 +00:00
91537bce4a
sizeof(fmtstring) + 8 wasn't enough for the string; that won't cope with the
...
printed version. Make a little more room for the bitmask_snprintf() call.
2000-08-08 19:59:41 +00:00
87ab5c42c5
%b -> bitmask_snprintf()
2000-08-08 19:42:40 +00:00
aac52686f0
Manually edit the headers to show which version of pcidevs this was
...
generated from.
XXX - this really should be automated
2000-08-07 08:27:11 +00:00
7ba2890ab8
Added PCI IDs for 3Com's Home Connect (3c450) and Office Connect (3cSOHO100).
...
They both are register compat with later versions of the 3c905 (tornado/
vortex) series.
2000-08-07 04:08:35 +00:00
8d37a29277
Regen.
2000-08-04 14:32:05 +00:00
fc2908cf8a
Vortex Computer Systems changes, from OpenBSD:
...
- Add product ID for GDT6518RS.
- Fix bogus product IDs.
2000-08-04 14:31:40 +00:00
ef86d29308
Add one more delay() to sip_read_eeprom().
2000-08-04 09:30:56 +00:00
fb20241fda
When performing pci_config_dump:
...
- Display the full value of 64-bit BARs.
- Avoid displaying the upper 32 bits of 64-bit BARs as a separate 32-bit BAR.
2000-08-03 19:58:55 +00:00
b6dd28b4ce
Support some differences in the Macronix 98715AEC-C and E chips from the other
...
98715* series.
The MX98715AEC-[C,E] use a different location in the serial eerom for
LED control, and programming it with the original location's values
caused unpredictable behavior.
Also, start integrating fixes where media changes on an adapter
under load may fail. There's more work to be done here, but I need
to sort out our internal changes a little more carefully.
2000-08-03 03:07:30 +00:00
cb4d63d57c
More compilation breakage in the non-DEBUG case
...
(from Castor Fu <castor@geocast.com>)
2000-08-03 03:00:04 +00:00
46c3f0204d
PCIIDE_CMD0646U_UDMA->PCIIDE_CMD0646U_ENABLEUDMA for consistency with
...
PCIIDE_AMD756_ENABLEDMA
defopt PCIIDE_CMD0646U_ENABLEUDMA, PCIIDE_AMD756_ENABLEDMA,
PCIIDE_CMD064x_DISABLE
Fix a typo pointed out by John Hawkinson
2000-08-02 21:49:09 +00:00
bd0766459c
Add support for the CMD PCI646U. Linux claims that this driver is brocken
...
with UDMA, so enable Ultra-DMA only if "options PCIIDE_CMD0646U_UDMA" is set.
2000-08-02 20:23:45 +00:00
1ae072f471
Fix bonehead bug for compiles w/o DEBUG set
...
(thanks to KANETA Shin'ichi <kaneta@cr.chiba-u.ac.jp>)
2000-08-02 17:39:50 +00:00
068c76fc80
Core version 2.0 (platform version 1.0) rewrite of ISP driver. Some
...
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
2000-08-01 23:55:09 +00:00
76c77aca38
Add support for the CMD PCI0646U2, an Ultra/33 version of the 0646.
...
Note: there's also a PCI0646U, for which I don't have docs for now.
2000-08-01 21:02:55 +00:00
d569dc2fb5
Whitespace fix (space rather than tab after #ifdef)
2000-07-29 17:49:08 +00:00
cbd3022e31
Make this compile without PUCCN defined.
2000-07-29 17:43:38 +00:00
b2bf026f39
Guard the console code in puc.c with the defopt PUCCN so we can
...
use the puc driver without having the com drivers.
2000-07-28 20:43:45 +00:00
081f57c846
Handle booting without a serial expander box connected.
2000-07-28 06:10:54 +00:00
0154cbce36
Ops, forgot this one: Add interrupt disable bit #define for HPT370
2000-07-27 15:26:16 +00:00
aa0d4a41d5
HPT370: clear disable interrupt bit; make it works in Ultra/66 mode.
2000-07-27 14:28:45 +00:00
fa8ff381d8
Add code to allow the PCI com serial ports to be used as the system
...
console. This is not enabled by default, and is turned on with
options PUCCN. Done by castor@netbsd.org .
2000-07-25 23:18:42 +00:00
5f7778cd1e
* Add entries for older Yamaha YMF chips (724, 740) plus the
...
newer steppings (740C, 724F) which use the same microcode as the
DS-1S/DS-1E.
Regen.
2000-07-23 00:18:24 +00:00
2169753fc5
* Add entries for older Yamaha YMF chips (724, 740) plus the
...
newer steppings (740C, 724F) which use the same microcode as the
DS-1S/DS-1E
2000-07-23 00:14:15 +00:00
b60bcd873d
Regen.
2000-07-20 14:47:35 +00:00
d3b42c18e4
Add what is apparently ESS's old vendor ID and corresponding product ID for
...
the Maestro 1.
2000-07-20 14:46:51 +00:00
6e88d58524
Make it compile when PCIIDE_AMD756_ENABLEDMA is defined. From kern/10555
...
by MURATA Shuuichirou.
2000-07-20 12:19:41 +00:00
00cafd0569
Add MIDI support. From Tatoku Ogaito.
2000-07-19 09:58:45 +00:00
c41ca10d33
add "#define PCI_INTERRUPT_PIN_MAX 0x04"
2000-07-18 10:59:04 +00:00
5446d3c92e
Don't make assumptions of the actual value of PCI_PMCSR_STATE_D0.
...
Problem noted by John Hawkinson.
2000-07-17 18:12:00 +00:00
cfae3184d8
Don't clobber bits from 2 to 31 when trying to change the power state.
...
Problem noted by John Hawkinson.
2000-07-17 17:53:44 +00:00
114bb7f9d9
If card is in power state D3 put it into power state D0 so that it will
...
at least work after the next reboot.
2000-07-16 20:18:48 +00:00
859057e6b3
Fix uninitialized variable (reg) in fxp_pci_confreg_restore();
...
this could result in garbage being written to the PCI status register,
which is unlikely to have had a serious effect. This was with us from
an #if 0 added in rev 1.6.
2000-07-15 21:36:19 +00:00
9feae259a4
Avoid printing duplicate colon when card is waked up.
2000-07-15 20:57:24 +00:00
cfe61a3025
Un-__P'ify kernel prototypes.
2000-07-15 19:59:27 +00:00
61c607b9fe
Improve kernel message when card is in power state D3. Instead of...
...
epic0 at pci0 dev 11 function 0 epic0: unable to wake up from ...
... print this:
epic0 at pci0 dev 11 function 0: unable to wake up from power state D3
2000-07-15 10:32:36 +00:00
498310f5be
Check if card was put into sleep mode using PCI/ACPI power management
...
and try to restart it. This patch based on hints by Jason Thorpe.
2000-07-14 22:00:32 +00:00
b71bddab49
Regen.
2000-07-10 16:32:07 +00:00
5a5452c95d
Add ICP Vortex RAID controllers.
2000-07-10 16:14:02 +00:00
469c88cc11
Clarify that the RX5C47X requires writes to the PCI_LEGACY to
...
disable and not PCI_BCR_INTR; this is what rev 1.9 did under
the label of "Maintenance."
2000-07-09 22:06:02 +00:00
e6e9cc5c41
Move legacy pcic-mode disabling code from pccbb_chipinit() to
...
pccbbattach(). This is necessary as pccbb_chipinit() is deferred, and
may not run until after the pcic is already attached.
Now pcics are properly disabled on Sony VAIO, f'rinstance.
2000-07-09 21:58:30 +00:00
bd8f07c394
Recognize the i82559ER.
2000-07-09 00:46:26 +00:00
5cdb782283
Regen.
2000-07-09 00:45:56 +00:00
9d0e35cc63
Add ID for i82559ER.
2000-07-09 00:45:14 +00:00
6421cc8af8
regen
2000-07-08 04:39:50 +00:00
d74c0a2e3e
add microSPARC IIep PCI controller
2000-07-08 04:38:55 +00:00
2646cf1612
Use the CMD PCI0648/9 IRQ ACK code for the 0646 too, makes the 0646 works
...
in native mode.
2000-07-07 13:54:25 +00:00
e2aaf9ef7f
Work around a bug in AMD756 rev D2, from patches provided by David Sainty:
...
disable multiword DMA for these chips. multiword DMA can be forced with
options PCIIDE_AMD756_ENABLEDMA on rev D2 chips, but use at your own risk !
While I'm there remove a duplicate allocation of sc_wdcdev.nchannels in HPT
code.
2000-07-06 15:08:11 +00:00
c466b99a9a
Use new isp_handle_index function. Redo how firmware is checked for
...
and loaded. Remember to enable interrupts after isp_reset but before
isp_attach. Return CMD_EAGAIN on request queue overflow so we can retry
the command when there's more queue space.
2000-07-05 22:12:23 +00:00
3c5afc2677
Back out previous, it has to be done in a different way.
2000-07-05 19:05:31 +00:00
838676ce64
Apply patch from David Sainty <David.Sainty@optimation.co.nz>:
...
Some AMD controllers have a bug which can look up the machine when using DMA, so
disable DMA for some revisions (info provided by AMD).
"options PCIIDE_AMD756_ENABLEDMA" can be used to force DMA on these chips.
2000-07-05 18:58:41 +00:00
fa436f165c
HPT: use pciide_channels[i] not pciide_channels[0]. My HPT370 now probes
...
both channels (but still doesn't work properly; I suspect I got a broken one).
2000-07-05 16:11:35 +00:00
88a0f6ee93
Match with promise ultra100/ata contoller. I haven't actually test this
...
contoller with ultra100 drive, but it works at least with ultra66 or more
older drive
2000-07-04 16:34:33 +00:00
fa92d1c635
Regen.
2000-07-04 16:30:42 +00:00
a710a5e35e
Add device ID of promise ultra100/ata controller.
2000-07-04 16:27:32 +00:00
cc05a49fb0
Regen.
2000-07-03 06:05:44 +00:00
72cbe1224d
Devices found in NEC Versa Note VX
2000-07-03 06:01:17 +00:00
235a799246
re-add README that got lost in 2.12-to-2.14 merge.
2000-07-01 01:59:54 +00:00
c01704a9db
remove unnecessary #ifdef __NetBSD__'s in #ifdef __FreeBSD__;
...
move one #include <vm/vm.h> into #ifndef __NetBSD__
2000-07-01 01:53:37 +00:00
d307475c33
resolve conflicts.
2000-07-01 01:38:58 +00:00
5457abf9cb
Import release 2.14 of the bktr driver. Changes: mostly integration
...
of NetBSD changes; support for new Hauppauge tuner types.
2000-07-01 01:30:43 +00:00
a9d80391d0
Move the include of <vm/vm.h> into the ifndef __NetBSD__ part.
2000-06-30 08:12:10 +00:00
7b0ccbb669
need uvm_extern.h for a function definition
2000-06-30 00:01:22 +00:00
0b82c9610f
Don't check for a BAR address past PCI_MAPREG_END; some devices
...
have BARs way out in left field.
2000-06-28 17:32:48 +00:00
7c15053eed
remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-28 16:08:42 +00:00
bddc013764
Add special IRQ handler for CMD PCI0648 and PCI0649 taken from the
...
experimental version of Manuel Bouyer's driver.
2000-06-27 05:57:05 +00:00
bfc5613f54
Revert some of the previous mmap() changes that were in "#ifdef FreeBSD"
...
parts of this file.
2000-06-27 05:14:31 +00:00
f4e210fb2c
remove redundant vm includes
2000-06-26 15:26:35 +00:00
2f159a1bac
remove/move more mach vm header files:
...
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
2000-06-26 14:20:25 +00:00
8a0d96e59e
Add support for the CMD PCI0648 and PCI0649 IDE controllers.
...
Thanks to Matthias Scheler for testing.
2000-06-26 10:07:52 +00:00
2e861ca3ce
Correct 80 pin handling for promise Ultra/66: when the bit is set
...
we *don't* have a Ultra/66 cable.
2000-06-26 09:55:26 +00:00
889c658b5b
Change the kernel mmap interface so that the offset to map is an
...
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
2000-06-26 04:55:19 +00:00
10eccb55ca
cmpci requires mulaw dependency.
2000-06-25 23:34:27 +00:00
fda426af2c
Defopt TLP_MATCH_*
2000-06-25 18:49:22 +00:00
3628d5523b
printf argument was in wrong position. Noted by Roger Hardiman
...
<roger@cs.strath.ac.uk>. (This code was ifdef'd out by default.)
2000-06-25 17:47:39 +00:00
79dffec702
Get PCI HME working.
2000-06-25 01:05:16 +00:00
1e343745fc
regen
2000-06-24 12:16:55 +00:00
103a704990
add Intel 82801BA devices
2000-06-24 12:16:21 +00:00
f82e306928
Add a clearing-house pseudo-device for system monitoring devices
...
such as the LM78 and VT82C686A (and eventually ACPI). Multiple
sensor devices can be hooked registered with `sysmon', and eventually
sysmon will also handle hardware (and software) watchdog timers.
Convert the `lm' and `viaenv' drivers to the new interface.
2000-06-24 00:37:19 +00:00
bc83dce0c6
Regen.
2000-06-21 09:16:16 +00:00
0273966f04
Add CMD PCI0649 product ID.
2000-06-21 08:58:57 +00:00
eee18e1f6c
beat back the undead: __BROKEN_INDIRECT_CONFIG had risen, and was
...
terrorizing innocent hackers...
2000-06-16 23:41:33 +00:00
0011842ea8
Regen.
2000-06-16 08:13:50 +00:00
567c710f2b
Add some S3 chips.
2000-06-16 08:13:25 +00:00
17de155949
Make sure we use firmware->host communication channel in cz_intr(), from
...
Bill Studenmund.
2000-06-14 17:54:33 +00:00
c521ba58c1
yet another change for NEC RISCstation 2250 of arc port.
2000-06-14 00:34:33 +00:00
3e3d2d7344
Regen.
2000-06-13 22:44:51 +00:00
d643d25eb9
Add CMD PCI0648.
2000-06-13 22:44:19 +00:00
3553879fc2
Use my proper name.
2000-06-13 13:36:42 +00:00
31c0cc5f46
Regen.
2000-06-12 22:33:41 +00:00
72d31d8d37
Add AMD 79c978 PCnet-PCI Home.
2000-06-12 22:33:06 +00:00
26bbb4f200
Regen.
2000-06-12 21:25:20 +00:00
034590578d
Shorter description for the HPT366
2000-06-12 21:25:01 +00:00
b21bc1b5b6
- add a pciide_irqack() callback, which clears the IDE DMA status bit once
...
the IRQ has been cleared on the drive.
- use pa->pa_class instead of re-reading PCI_CLASS_REG when possible
- Add support for Highpoint HPT366 and HPT370 (370 untested), based
on patches from Roger Brooks <R.S.Brooks@liverpool.ac.uk> posted on
current-users Mach, 15. Given how Highpoint docs have been wrong for the
366, the 370 is likely to not work.
Thanks to Chris Cappuccio <chris@dqc.org> for sending me the Highpoint
docs, and to Total Archive (http://www.totalarchive.com/ ) for sending
me hardware.
2000-06-12 21:20:51 +00:00
8642ac97bf
Regen.
2000-06-12 21:12:59 +00:00
1970e14b93
Add HPT366/370 device ID.
...
XXX Is 'TRIONES' the rigth vendor name ?
2000-06-12 21:12:30 +00:00
eb21ed4746
Adapt to going back to decemal device numbering.
2000-06-09 18:00:45 +00:00
8d04cd3f90
Rather than assinging 64 tty's per pci card, assign tty's as found.
...
Cyclades says driver should work with up to 128 tty's per pci card
even though they only support 64 now. Also matches FreeBSD behavior.
Print located tty's using new tty naming scheme - ttyCZ?? where ?? are
two hex letters.
Make firmware load on macppc - one le32toh() was missing.
2000-06-09 16:53:23 +00:00
8ac7bdd00c
changes for NEC RISCstation 2250 of arc port.
2000-06-09 04:48:12 +00:00
77625cf7ec
long long constant needs "LL" suffix.
2000-06-09 04:45:53 +00:00
b8f4f2be87
Regen.
2000-06-09 00:21:08 +00:00
def28a5cd2
Add some PCI devices found in the IOpener (commited from the IOpener itself :).
2000-06-09 00:20:18 +00:00
6dd21e55a9
Make attach messages consistent with PCI drivers. Make function pointer
...
usage consistent with other drivers.
2000-06-08 22:15:52 +00:00
b6a821f042
Change IPL when bridge's interrupt handler calls child device's
...
interrupt handler (This solution is not very good).
2000-06-08 10:28:28 +00:00
295ed77595
The OPTi controller supports a 32-bit dataport after all.
...
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
2000-06-07 20:42:52 +00:00
887d4555cd
Regen.
2000-06-07 19:53:17 +00:00
4837200a8c
Add vendor/device ID for 3ware Escalade IDE RAID controller.
2000-06-07 19:52:07 +00:00
a67130a218
regen.
2000-06-07 09:55:22 +00:00
09b843b7f6
fix a couple of the sun entries.
2000-06-07 09:52:16 +00:00
dca97557cd
Add CB_BCR_RESET_ENABLE in bridge control resister's bit definition.
2000-06-07 09:02:46 +00:00
b15bbb90f9
Add missing break;
2000-06-07 04:31:49 +00:00
13ed0863f8
Regen.
2000-06-07 01:58:17 +00:00
e2c1012576
Add Trident 9397DVD.
2000-06-07 01:57:30 +00:00
c85d6d7ca3
Improve the Cypress name a little.
2000-06-06 22:56:06 +00:00
a452638f06
In pciide_mapreg_dma(), check to see what type the BAR is before
...
mapping the registers, as suggested by a comment in that function.
2000-06-06 22:47:22 +00:00
ba5df2479b
Shorten names of VIA controllers to fit in 80 columns with versions.
2000-06-06 17:48:12 +00:00
c40fa3c4d4
Actually program the DMA mode of the drives into the Cypress
...
controller. Fixes a long-standing problem where IDE DMA wasn't
working on the AlphaPC 164SX.
2000-06-06 17:34:22 +00:00
05d7f969b9
Regen.
2000-06-06 07:55:50 +00:00
aed5858e8b
Add the product ID for the ESS Maestro 3 modem function as well.
2000-06-06 07:55:17 +00:00
21d9669e4f
Common routines for read/writing Cypress 82c693 control registers. Needed
...
by `pciide' and the Alpha `sio' (PCI-ISA bridge) driver.
2000-06-06 03:07:39 +00:00
8c4d1bf1f9
Adapt MI ncr53c9x changes.
2000-06-05 15:08:00 +00:00
ca3d9c7fa7
Regen.
2000-06-05 11:34:07 +00:00
428a7ca4e3
Add the ESS Maestro 3 product ID as well.
2000-06-05 11:33:35 +00:00
9b40e3731a
Regen.
2000-06-05 11:31:15 +00:00
be40495bb0
ESSTECH:
...
* add what's allegedly the Maestro 1's product ID.
* align product names with data sheets.
2000-06-05 11:29:28 +00:00
745e3fef63
pciiide -> pciide
2000-06-04 22:22:12 +00:00
f44619d89d
KNF some lines.
2000-06-02 18:34:05 +00:00
87a5ae384c
Update URLs.
2000-06-01 09:58:19 +00:00
f1b4af5ba1
Make this compile too.
2000-05-30 08:36:27 +00:00
e78793c612
Beginning of a IEEE 1394 framework. An attachment for PCI OHCI controllers
...
and bus-independent module that just begins to print things out. No real
code behind it. THIS IS A WORK IN PROGRESS. The *reg.h are woefully
incomplete.
2000-05-30 06:56:13 +00:00
c7326acd04
Add the PCI attachment for IEEE 1394 OHCI controllers. Files to follow later.
2000-05-30 00:53:14 +00:00
fd1991294f
Regen
2000-05-30 00:21:07 +00:00
adaaa34784
Add the TI 1394 controllers. Makes all the 1394 controller descriptions
...
similar.
2000-05-30 00:20:41 +00:00
8cde93a435
* Support (not so) new cards. (only Cyclom-8YsP+ is tested)
...
* Make compilable with CY_DEBUG.
2000-05-29 12:05:41 +00:00
c461529353
regen
2000-05-28 10:25:25 +00:00
f8091908b5
-correct description for 3c905b-FX (100 Mb only)
...
-add Neomagic 256ZX
2000-05-28 10:24:57 +00:00
3a4393ff92
While DM9102A boards tend to have ISV-format SROMs (likely to describe
...
the HomePNA PHY typically connected to the external MII interface),
DM9102 implementations (often found on motherboards) do not. Handle
this.
2000-05-27 19:42:06 +00:00
46807640c7
Add support for the OPTi 82c621 PCIIDE controller and its derivatives.
...
I only have a Compaq laptop on which to test this, so reports of
success/failure in other systems would be welcomed.
2000-05-27 17:18:41 +00:00
1d2a3e79a9
Regen.
2000-05-27 17:12:36 +00:00
713621eb0e
Add entries for a couple of OPTi PCI-IDE controllers.
2000-05-27 17:11:37 +00:00
00369993f9
Whitespace police.
2000-05-27 16:38:02 +00:00
ed0572ca92
Regen.
2000-05-27 11:40:04 +00:00
eaef48d317
Add a few devices.
2000-05-27 11:38:31 +00:00
8a3725612d
Add support for the Davicom DM9102 and DM9102A 10/100 Ethernet chips.
...
Partially based on diffs submitted by Matthew Orgass <darkstar@pgh.net>
and IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>.
2000-05-26 16:38:13 +00:00
3d7bdc4c94
Fix a bug introduced in last commit which caused a painc due to
...
re-enqueueing an already free ccb.
Prepare the background to have a unique initialization function for
all of the supported host adapters.
Rename a lot of #define in a more sane way.
Move Carriers initialization and defines in adwmcode.{c,h}
Don't lose Carrier nodes in case of a BUS/Chip reset explicitly invoked
after a DMA failure.
XXX - DMA failure still arise when AdvanSys U[2]W host adapters are used
in conjunction with Intel 82443BX Host Bridge/Controller (rev. 0x03).
!?!Have to understand why!?!
2000-05-26 15:13:43 +00:00
bf05730540
Regen.
2000-05-26 05:07:02 +00:00
5bd1e75033
Add NEC 1394 OHCI chips
2000-05-26 05:06:27 +00:00
b063b2ec36
Separate the sheduler from the main script, allocate another DMA-safe
...
memory page for the sheduler. Put the main script in the on-chip RAM when
available.
Avoid a null-pointer dereference when DSA is invalid.
2000-05-25 10:10:54 +00:00
4f92d2cd54
Update from Bill Studenmund <wrstuden@zembu.com>:
...
- Note that the FreeBSD driver distributed by Cyclades served as
documentation on how the board works.
- Use the wait-until-pending-I/O-completes-before-loading-parameters
command in czttyparam().
- Pass BREAKs up to the tty later properly.
- Garbage-collect some debugging code.
2000-05-24 22:26:35 +00:00
8f7304f9b7
Typo in previous.
2000-05-23 16:47:44 +00:00
5c9920bbb6
Update from Bill Studenmund <wrstuden@zembu.com>:
...
Correctly send and receive BREAKs -- still needs to do something
intelligent with them. Some additional debugging goo.
2000-05-23 01:02:21 +00:00
c2b6147132
Replaced overlooked BROOKTREE_SYSTEM_DEFAULT with BKTR_SYSTEM_DEFAULT,
...
as noted by Roger Hardiman.
2000-05-22 01:00:29 +00:00
56cb02c358
Use bktr_softc.bktr_dev.dv_xname instead of "bktr0" when printf'ing as
...
requested by Klaus Klein in kern/10166.
Also add device instance name to all printf's that didn't have it.
2000-05-21 15:43:56 +00:00
c3e3a945cc
Add a missing bktr%d: in one of the attach messages.
...
(When is this code going to be KNFed?)
2000-05-20 16:16:15 +00:00
f2973e2fb8
- Change RL_* -> RTK_*
...
- Free bus_dma resources if attach fails
- Add detach and power management code
Patch from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> in kern/10156.
2000-05-19 13:42:29 +00:00
3e403cdb65
In tiocm_to_cztty(), use SET() instead of CLR() in the
...
TIOCMBIS case. "Oops!"
2000-05-19 06:01:14 +00:00
59164fe0fc
Fix an inverted test.
2000-05-18 17:55:17 +00:00
6095f60587
regen
2000-05-18 13:04:27 +00:00
309b0ed70d
fix typo in last commit
2000-05-18 13:03:31 +00:00
4d3e8e6976
regen
2000-05-18 08:03:22 +00:00
81fd58c65b
Add the device ID for the IBM MPIC-II.
2000-05-18 08:02:19 +00:00
5274a6162f
Add a device driver for the Cyclades-Z series of intelligent multi-port
...
serial boards. Written by Jason R. Thorpe and Bill Studenmund.
2000-05-17 17:58:09 +00:00
07ea678d4d
Register definitions and preliminary API definition for the PLX 9060
...
family of PCI bus controllers.
2000-05-17 17:47:00 +00:00
c4042e45a5
Sync my copyrigth notice.
2000-05-15 08:46:00 +00:00
e557084177
Update for siop split.
2000-05-15 08:27:24 +00:00
a1c4db6c37
- split siop_pci in attachements vs helper functions, for comming esiop
...
- add a reset callback to enable PCI-specific features. This improve bandwith
by a factor of 2 on my alpha with a 875 !
- sync copyrigth notice
2000-05-15 07:53:17 +00:00
e5ae7c287a
Symbol namespace cleanup: rl_ -> rtk_
2000-05-15 01:55:12 +00:00
a4b298224a
Use <dev/ic/ac97reg.h>
2000-05-15 01:35:29 +00:00
1838aef29c
ac97.h -> ac97var.h
2000-05-15 01:27:44 +00:00
8513bb93ed
Regen.
2000-05-14 14:58:14 +00:00
b84dfa7c45
Add SGI IOC3.
2000-05-14 14:56:53 +00:00
e0292df01c
sc_ih (interrupt cookie) is not pci-specific data
...
and needs to remain in fxp_softc rather than fxp_pci_softc;
otherwise we break cardbus.
2000-05-12 18:46:33 +00:00
cd82969dfc
Print the revision info from the PCI configuration header. From
...
Dave Sainty, kern/10025.
2000-05-12 17:52:07 +00:00
c8de5ae180
Treat the 3c980C-TXM like the 3c980 Server Adapter. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:48:47 +00:00
032c5f01de
Regen.
2000-05-12 17:47:05 +00:00
0a712d4707
Add product ID for 3Com 3c980C-TXM 10/100 Ethernet. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:46:47 +00:00
288883fca7
Apply indent(1).
2000-05-12 16:42:41 +00:00
6474f16852
Use ether_crc32_le().
2000-05-12 16:41:59 +00:00
421c001447
Move struct fxp_pci_softc declaration to if_fxp_pci.c removing an
...
unnecessary header file (if_fxp_pcivar.h); oh, how quickly the nascent
inodes are subject to infant mortality.
2000-05-12 13:46:31 +00:00
cd552bf956
Fix bugs seen on Sony Vaios.
...
Address kern/9370, kern/9548, kern/9571, and kern/9573.
Save and restore critical PCI configuration registers because they are
sometimes bashed.
Add a powerhook to restore said PCI registers after APM events.
The fxp now works across a warm boot from windows (vaio).
The fxp now works across an apm suspend/resume or hibernate/resume cycle.
2000-05-12 03:37:40 +00:00
6622f20fc1
Move pci-specific data to fxp_pci_softc from fxp_pci_softc.
...
Add some more pci-specific data to fxp_pci_softc.
2000-05-12 03:36:18 +00:00
8d671b6292
Define some PCI power management CSR constants.
2000-05-12 03:35:34 +00:00
5786c811d5
Support 64-bit PCI memory mapping registers, as sometimes are used
...
on the Symbios 53c896 controller. Also, prefer memory space over
I/O space.
2000-05-10 17:22:46 +00:00
90f7e687dc
These are no longer used.
2000-05-10 17:09:44 +00:00
d56c0ff801
Support Adaptec U2W cards with a 64-bit PCI memory range (such cards
...
are available with Power Macintosh G3 and G4 systems).
2000-05-10 17:07:52 +00:00
5939e70ca3
Add support for mapping 64-bit PCI memory space. If the region
...
is mapped in a way that is inaccessible by a 32-bit bus_addr_t, then
print a message to that effect and return failure.
Original patches by Bill Studenmund, with a few small changes by me.
2000-05-10 16:58:42 +00:00
7a6f003756
Add a comment describing the previous change.
2000-05-10 08:39:58 +00:00
7d4bae615d
Move if_rl_pci.c:1.7 to if_rtk_pci.c.
2000-05-10 00:19:55 +00:00
05e928a241
Ops, abort if we can't map the registers ! Pointed out by Matthias Drochner.
2000-05-09 17:05:52 +00:00
2648a72bb2
Minor changes to PCI configuration
2000-05-08 17:11:54 +00:00
6d3ce966ce
VIA VT82C686A hardware monitor
2000-05-08 16:40:42 +00:00
05f0b17555
Make pci_get_capability() work correctly on both header type 0 and type 2
...
devices; both have different Capability List Pointer registers.
2000-05-08 10:52:38 +00:00
085ec82073
Add a register offset for the Capability List Pointer in header type 2.
...
XXX Ideally the PCI-Cardbus Bridge header should be restructured to just
XXX present standard register definitions, making it ~safe to be included.
2000-05-08 10:45:52 +00:00
de328af944
Fix a inverted logic botch introduced in rev. 1.35, typically causing
...
cb_chipset() to return the wrong chipset type.
2000-05-08 07:31:20 +00:00
8651580247
man page is written, remove it from TODO
2000-05-07 20:47:10 +00:00
8ee4c016eb
PCI product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 17:00:06 +00:00
mjacob