rafal
2d6f1ac150
The Tigon driver is known to have issues on BE systems, so remove it (I got
...
the card probed & attached, but had to hack the driver source to even get
it that far and it had issues after that which made me punt on it).
2003-01-03 08:14:44 +00:00
rafal
f2c485b280
Move console setup after we've determined machine type so the console init
...
code can guess where to find a console depending on machine type.
2003-01-03 06:26:06 +00:00
rafal
fe84d50d7e
Mark the CRIME/MACE register twiddling done after autoconfig with an XXX so
...
it gets cleaned out when the interrupt registration code is capable of doing
the interrupt mask setup itself.
2003-01-03 06:24:18 +00:00
pooka
fb4bf2a901
* tweak CRIME and MACE interrupt masks for IP32 and add some verbosity
...
* recognize ahc scsi as a boot device
once again thanks to Chris Sekiya
2003-01-02 15:08:18 +00:00
thorpej
dca15fc8c2
Use aprint_normal() for cfprint routines.
2003-01-01 02:10:08 +00:00
pooka
bca1052dab
on second thought... make this also compile
2002-12-28 16:44:36 +00:00
pooka
00ddd0deec
add timer calibration
...
from Chris Sekiya
2002-12-28 16:40:48 +00:00
pooka
30d4a8344b
sync with mecreg change, ie. make this compile
2002-12-26 22:25:12 +00:00
pooka
a0c298e366
brush up situation with mec register definitions
...
from Chris Sekiya
2002-12-26 22:24:46 +00:00
pooka
c99132ebb0
Shuffle network interface and phy drivers into alphabetical order and
...
add comments for them.
2002-12-26 18:26:07 +00:00
pooka
87a74ecee8
Use crimereg.h definitions for the crime dog. Also, move watchdog
...
disable down the very last possible place in cpu_reboot.
from Chris Sekiya
2002-12-23 21:04:23 +00:00
pooka
8ecf5692ac
add bus_space_vaddr()
...
from rafal
2002-12-23 20:41:47 +00:00
pooka
0dd7013e7a
MACE register definitions
...
from Chris Sekiya
2002-12-23 20:05:06 +00:00
pooka
b31b740c2b
CRIME register definitions
...
from Chris Sekiya
2002-12-23 20:04:22 +00:00
pooka
1fcaee0848
add debug printf
...
from Rafal
2002-12-23 19:49:27 +00:00
pooka
2f32342d20
also create boot.ip32 with the entry point set to the IP32 load address
...
from Chris Sekiya
2002-12-23 19:31:24 +00:00
pooka
fb83173bb6
add some ethernet interfaces
...
from Chris Sekiya
2002-12-23 19:18:34 +00:00
lukem
7f7f9da211
minor delint
2002-12-13 02:36:37 +00:00
simonb
6a5e492b57
Remove the explicit `makeoptions MACHINE_ARCH="mipse{b,l}"' for kernel
...
builds and use the endianness of the toolchain being used to determine
the endianness of the kernel.
2002-12-09 22:54:09 +00:00
lukem
0635de35a3
Remove KDIR=, since SYS_INCLUDE=symlinks and KDIR are not supported any more.
2002-11-26 23:30:07 +00:00
wiz
e78e668887
Fix typo (responsiness -> responsiveness).
2002-11-22 12:20:58 +00:00
thorpej
9972dfbbbf
Add "-mno-abicalls" to AFLAGS. Add "-ffreestanding -msoft-float" to
...
CFLAGS.
2002-11-10 17:12:58 +00:00
thorpej
73f78d5e61
Fix signed/unsigned comparison warnings.
2002-11-09 18:52:20 +00:00
thorpej
a1ef3f204e
Avoid a strict-aliasing warning from GCC 3.3.
2002-11-09 18:49:02 +00:00
jdolecek
c82ab2eb79
now that mem_no is emitted by config(8), there is no reason to keep
...
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies
2002-10-26 13:50:17 +00:00
junyoung
e4b7588c28
Add NEW_BUFQ_STRATEGY (disabled by default).
2002-10-18 15:11:08 +00:00
elric
5ab71e20b0
Added commented out cgd(4)s to GENERIC configs.
2002-10-14 18:39:22 +00:00
rafal
5ad5ca60a5
Memory and I/O space accesses to MACE PCI address ranges are passed through
...
in the correct byte order, so there's no reason to byteswap them.
2002-10-10 18:16:40 +00:00
provos
2f7a0aaac8
add SYSTRACE; approved perry.
2002-10-06 02:11:54 +00:00
elric
d19d268a95
assign majors for raw and cooked cgd's.
2002-10-04 18:28:24 +00:00
thorpej
89bf5a8f8e
Add trailing ; to CFATTACH_DECL.
2002-10-02 15:52:22 +00:00
thorpej
b96bc0d7bc
Use CFATTACH_DECL().
2002-10-02 04:06:36 +00:00
thorpej
0dac35b547
Use CFATTACH_DECL().
2002-10-02 02:00:07 +00:00
thorpej
217c799fe7
Use CFATTACH_DECL().
2002-10-01 21:24:43 +00:00
thorpej
f818766afe
Declare all cfattach structures const.
2002-09-27 20:31:45 +00:00
provos
0f09ed48a5
remove trailing \n in panic(). approved perry.
2002-09-27 15:35:29 +00:00
thorpej
6c88de3b53
Introduce a new routine, config_match(), which invokes the
...
cfattach->ca_match function in behalf of the caller. Use it
rather than invoking cfattach->ca_match directly.
2002-09-27 03:17:40 +00:00
thorpej
d1ad2ac4f2
Rather than referencing the cfdriver directly in the cfdata entries,
...
instead use a string naming the driver. The cfdriver is then looked
up in a list which is built at run-time.
2002-09-27 02:24:06 +00:00
thorpej
c75e60ed75
Get the pointer to the driver name early, rather than constantly
...
deferencing the cfdriver pointer.
2002-09-26 20:45:42 +00:00
thorpej
71404bb533
Don't include <sys/map.h>.
2002-09-25 22:21:01 +00:00
martti
81e8d78cd4
Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"
2002-09-25 11:49:48 +00:00
martti
3b553bac54
Added (commented out) IPFILTER_DEFAULT_BLOCK.
2002-09-20 10:39:48 +00:00
lukem
3ea2e21f82
enable USERCONF by default; it's small and extremely useful to have available.
2002-09-18 02:43:53 +00:00
gehenna
77a6b82b27
Merge the gehenna-devsw branch into the trunk.
...
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
2002-09-06 13:18:43 +00:00
thorpej
139cdc3125
Make nbuf, nswbuf, and bufpages unsigned. Make all operations on these
...
variables unsigned, and update places where their values are printed.
2002-08-25 20:21:33 +00:00
briggs
0b956d0b8b
Implement pmc(9) -- An interface to hardware performance monitoring
...
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.
pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.
2002-08-07 05:14:47 +00:00
simonb
fef76c7e26
Use a __HAVE_BOOTINFO_H define to check for bootinfo support instead of
...
speading port names in arch-dependant code.
2002-08-05 02:13:14 +00:00
gmcgarry
3647e0d293
Merge cpu_sysctl() for all mips ports, based on powerpc and m68k precedent.
...
For now, only pmax implements CPU_BOOTED_KERNEL. Need to revisit.
2002-08-04 01:41:23 +00:00
thorpej
3912e469dd
Rename cdev_systrace_init() to cdev_clonemisc_init(), so it can
...
be properly used by any misc. cloning device. While here, correct
a comment to indicate that "open" is the only entry point and that
everything else is handled with fileops.
2002-07-19 16:38:14 +00:00
rafal
695a5c114c
Cleanup and enhancements to sgivol, mostly from Scott G. Taylor, with some
...
tweaking by me. Specifically, this gives sgivol an "unattended" mode that
can be used from eg. sysinst to install the bootblocks.
2002-07-18 16:02:42 +00:00