2 times in the past
- Set up timeout per xfer instead of per interrupt. This helps with
PIO transfer (we would call timeout()/untimout() several times for a
transfer).
- If we missed an interrupt for a PIO transfer, reset and restart it
immedialy, don't try to recover and continue. If we missed an interrupt we
may have lost a read/write cycle on the IDE bus. If this happens 1) we
corrupt data and 2) we enter an interrupt loop at the end of the xfer, as
the drive has some more data to read/write, but the host thinks the xfer is
done.
This last change fix the (or at last some of the) 'lookup after lost interrupt'
some peoples have been experiencing.
the 68901. Do this now by _assigning_ ~<bit_to_clear> instead of the
previously used 'andb ~<bit_to_clear>'. The latter caused a rwm-cycle that
caused a race condition to happen when an interrupt arrived between the
Read and Modify-Write.
Anyway, this solved my hanging keyboard problem.
that is priority is rasied. Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.
This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).
XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX. This platforms still have this bug until their
XXX spl*() functions are fixed.
allocations should fail if the pool is at its hard limit.
Document flag in pool(9).
Use it in mbuf.h for the first allocate call for M_GET, M_GETHDR, and
MCLGET, so that m_reclaim gets called even for blocking allocations.
anyway, take advantage of this and greatly simplify the programming
of the multicast filter. This solves the last reported "device timeout"
problem with this driver.
mbufs since you might overwriting valuable data. (think of
m_copy'ed data from a TCP re-transmission queue. Since those
might be in clusters and referenced in two sockets).
* return EROFS for volume mounted RO when the nameiop is DELETE or RENAME
(the same way ufs_lookup() does)
* add explicit call to cache_lookup() on NetBSD (handled by generic VFS
layer in FreeBSD)
* avoid using strncmp() when checking whether the name is . or ..
* fix locking of parent directory for ISDOTDOT case
* call cache_enter() always (even for . and ..)
* vnodeops array: add entry for vop_fcntl_desc, remove unnecessary casts
Reviewed by: wrstuden
Tested by: jdolecek
to the EPIC/100 driver's (adjusting for the fact that Intel Ethernet chips
are from Pluto):
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() is changed to handle compressing clusters.
Simplify some of the receive list logic:
* Rather than using a homegrown queue and additional software RX descriptors,
use an ifqueue to queue receive buffers, and M_{GET,SET}CTX() to hook DMA
maps and receive buffers together.
Clean up a bit:
* Macroize a bunch of things to make the code a bit easier to follow.
base of the Chipmem). With the new pmap_extract, we distinguish this from
an invalid kernel mapping. Don't confuse the reader with the old panic
message.
call with F_FSCTL set and F_SETFL calls generate calls to a new
fileop fo_fcntl. Add genfs_fcntl() and soo_fcntl() which return 0
for F_SETFL and EOPNOTSUPP otherwise. Have all leaf filesystems
use genfs_fcntl().
Reviewed by: thorpej
Tested by: wrstuden
so that they are not includes if no PHY is configured
(avoids code bloat if an interface driver has the "mii" attribute but
mii is not used by the particular version)
Schroder <perseant@hitl.washington.edu>, unlock the mounted on
vnode before we call VFS_ROOT so that we cover the case where the new
root vnode shares a lock with the mounted-on vnode. Note that we have
asserted vfs_busy on the new fs before unlocking, so no other process can
steal the mount out from under us.
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() it changed to handle compressing clusters.
This makes close() work properly, but it is still not ideal. Perhaps
there should be different device nodes for input and output on to
and endpoint with the same number?
Pay attention to the SHORT_XFER_OK ioctl().
worth of data under NetBSD -- FreeBSD bread() seems to be able to
return more data and code counted with it
it's possible to actually mount NTFS volume now
sending 5 bytes per sample, it sends 3 omitting the 2nd set of
dx/dy updates. You can distinguish between the two forms since
the first byte of 5-bytes seq will be 0b10000xxx which a 3-byte
will have 0b10001xxx. This changes allows the Xsun server to
run unchanged on the Tadpole 3GX (ignoring for now that the
colormap is still broken).
of the kernel). Also, if the mouse baud rate is 0, say the mouse the isn't
there (so a terminal may be attached in its place). Make debugging mouse
problems much easier.
exists is bogus. The goal here is to produce a synthetic link count
which won't confuse fts and similar routines which "know" that
directories with a link count of 2 don't have subdirectories (and
thus, they can avoid having to stat every entry in the directory
looking for subdirectories which aren't there).
We know that non-UNIX filesystem implementations may return a link
count of `1' for directories with an indeterminate number of
subdirectories; if either the upper or lower layer returns a link
count of `1', return a link count of 1. If both layers return a link
count of 2, return a link count of 2; otherwise, return the sum of the
link count of both layers.
Also, fix PR7430: unionfs ignores read-only mounts. Check for
MNT_RDONLY in union_lookup (more-or-less as in layer_lookup) as well
as union_access() and union_setattr().
Note that a read-only union layer may still cause side effects on the
underlying filesystems... Most notably, we'll still attempt to create
shadow directories in the upper layer. Also, of course, we'll
side-effect atimes in the lower layer.
It supports RASTERCONSOLE only and the colormap support is
broken (the hardware doesn't seem to be doing what the tech.
docs. say it should be doing). But it is usable as a console
(but with blue on white as the only color choice). I figured
I'd check it in since it is somewhat usable and someone else
might figure what I screwed up in the color map support.
"panic: lockmgr: using decommisioned lock"
(only if DIAGNOSTIC)
The problem turned out to be due to the way LK_DRAIN was (not) handled
in union_lock; it just got passed through to the lock on the upper
vnode (which got marked as decommissioned, instead of that happening
to the union vnode. When the upper vnode was next locked (typically
when it was released), it went kaboom.
laptops. There is currently something wrong with the interrupt
code but it does attach and sense a 16550a. (anyways the built
in modem is only a 14.4Kb and you'd really want to use a PCMCIA
modem to get faster dialup rates).
by removing the "| wsdisplay" from the wsmux.c file declaration. This
will cause any kernel which includes wsdisplay but not wsmux explicitly
to fail to link, but at least those of us with multiple wsdisplays on
a single machine can build kernels again.
Constantine Sapuntzakis confirmed by Bill Sommerfeld. Although nothing is
supposed to call wakeup on this without setting AT_DONE, it's good practice to
do it this way (the process may be waken up by a setrunnable() call).
The problem was due to an interaction between the doomed unmounts done by
amd and getnewvnode.
I convinced myself that it's ok for getnewvnode() to do a sleeping vfs_busy().
Tested with multiple builds running while another process attempted to unmount
/usr once a second.
too. Remove some needless code duplication by adding a "drain" argument
to the ACQUIRE() macro (compiler can [and does] optimize the constant
conditional).
free a PV page if the PV entry was associated with the kernel pmap,
since the kernel pmap is locked, and freeing the page will execute
a code path which will attempt to lock it again, resulting in deadlock.
No real loss, since the next time a PV entry is freed, the page will
be freed, too.
locking primitive directly to lock it, since those will never attempt
to call printf() to display debugging information (and thus deadlock
on recursion into the kprintf_slock).
- Now compatible with MULTIPROCESSOR (requires other changes not yet
committed, but which will be later today).
- In addition to tracking simple locks, track exclusive spin locks.
- Count spin locks like we do sleep locks (in the cpu_info for this
CPU).
- Lock debug lists are now TAILQs, so as to make the locking order
more obvious when dumping the list.
Also, some suggestions from Bill Sommerfeld:
- SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED constants, which may be
defined in <machine/lock.h> (default to 1 and 0, respectively). This
makes it easier to support architectures which use test-and-clear
rather than test-and-set.
- Add __attribute__((__aligned__)) to the `lock_data' member of the
simplelock structure. This makes it easier to support architectures
which can only perform atomic operations on very-well-aligned memory
locations. NOTE: This changes the size of struct simplelock, and
will cause a version bump.
once for ipv6. This patch makes the ipv6 case pass NULLs in for fast
and slow timeouts iff defined(INET) and passes in the right function
if !defined(INET).
Reveiwed by itojun@iijlab.net.
first in line for the specified identifier. For use in places where
you don't want a Thundering Herd.
While here, add an optimization to wakeup() suggested by Ross Harvey.
- 'struct fbsoftc' created, which points to a 'struct fbinfo'
- 'struct fbinfo' for each device is allocated with fballoc()
This means:
- Console device doesn't get different 'struct fbinfo' at attach
- Console device doesn't get initialized twice
- Color rcons now works
- The current Xserver MUST BE REBUILT.
calls to reflect this. Also, block statclock rather than softclock during
in the proclist locking functions, to address a problem reported on
current-users by Sean Doran.
write lock when doing PID allocation, and during the process exit path.
Use a read lock every where else, including within schedcpu() (interrupt
context). Note that holding the write lock implies blocking schedcpu()
from running (blocks softclock).
PID allocation is now MP-safe.
Note this actually fixes a bug on single processor systems that was probably
extremely difficult to tickle; it was possible that schedcpu() would run
off a bad pointer if the right clock interrupt happened to come in the
middle of a LIST_INSERT_HEAD() or LIST_REMOVE() to/from allproc.
and PID allocation MP-safe. A new process state is added: SDEAD. This
state indicates that a process is dead, but not yet a zombie (has not
yet been processed by the process reaper).
SDEAD processes exist on both the zombproc list (via p_list) and deadproc
(via p_hash; the proc has been removed from the pidhash earlier in the exit
path). When the reaper deals with a process, it changes the state to
SZOMB, so that wait4 can process it.
Add a P_ZOMBIE() macro, which treats a proc in SZOMB or SDEAD as a zombie,
and update various parts of the kernel to reflect the new state.
by default. The X11 distribution included in our last release already
supports it and the wsmouse protocol can be used for any of the above
and for USB mice.
body of reaper(), right before the call to uvm_exit(). cpu_wait() must
be done before uvm_exit() because the resources it frees might be located
in the PCB.
remove simplelockrecurse, lockpausetime and PAUSE():
none of these serve any purpose anymore.
in the LOCKDEBUG functions, expand the splhigh() region to
cover the entire function. without this there can still be races.
If I _had_ to pick an arch on which to learn how this stuff works, it probably
would not have been vax... unless of course I was experimenting with time
compressing drugs. If we have a 1.4.2, this is definitely a candidate.
- Fix some locking bugs; a couple of places would return an error condition
without unlocking the map.
- Deal with maps marked WIREFUTURE; if making an entry VM_PROT_NONE ->
anything else, and it is not already marked as wired, wire it.
of some functions. Use these flags in uvm_map_pageable() to determine
if the map is locked on entry (replaces an already present boolean_t
argument `islocked'), and if the function should return with the map
still locked.
ragge