Commit Graph

1293 Commits

Author SHA1 Message Date
mjacob 2b760bfd7b remove most target mode stuff. Change the arguments to the
isp_fastpost_complete function to include a handle. Do some
isr register debouncing. Use new inline functions for xflist
handle storage. Remove isp_dumpxflist function. Do some fixups
of NVRAM from some broken cards. Use Full Login after LIP option
for FC cards if f/w < 1.17 - there's a f/w bug that causes the
port database to not be actually refreshed for local loop devices!
Do the appropriate endian swizzling for the ICB. Ditto for SNS structures
(these are no-ops until UltraSparc PCI needs them).
1999-10-14 02:27:12 +00:00
mjacob 74f3840c1b Roll minor version. Change how f/w revisions are stored. Add some
defines to get max luns for a card. Make sure the RESULT_QUEUE_LEN is not less
than 64- I've seen breakage with that. Move the temp port database stuff
into the softc (ick). Remove most of the target mode stuff. Make xflist
storage an external outer layer thing (since it will now be allocated based
upon the maximum commands that this HBA can support rather than request
queue size).
1999-10-14 02:21:50 +00:00
mjacob c607d0ea19 Update FC icb type to have the variants for the 2200 (we don't use it
yet). Remove all target mode definitions.
1999-10-14 02:18:40 +00:00
mjacob 2030b173b8 Add this file to contain common inline functions for use with the Qlogic
driver.
1999-10-14 02:16:55 +00:00
thorpej 8d56d3f3f0 Bound one auto-calibration loop that was missed in previous rounds of
changes.

Yay, audio on my Dell laptop works again.
1999-10-12 00:16:42 +00:00
thorpej 5082673b91 - Encapsulate the EEPROM reading code into ep_read_eeprom(), and use
the correct "read eeprom" opcode on the RoadRunner (which has a larger
  EEPROM, and thus needs a different opcode to make room for the larger
  offsets).
- Reset and enable the MII before probing for PHYs, and reset and enable
  the MII in epinit().
- Be more conservative when resetting the interface after a transmit error.

Based on PR #8331, from Ryoji KATO.

Closer on 3c574, probably will work fine with the 3CCFEM556BI (which
won't have an older rev TDK Semi PHY, and which was tested by the author
of the PR).
1999-10-11 17:48:20 +00:00
thorpej 7871f8c56d Add some more RoadRunner bits. Partially from Ryoji KATO, PR #8331. 1999-10-11 17:41:56 +00:00
mycroft d486b755ca Fix prototype of bha_ccb_phsy_kv() so this compiled on the Mac again. 1999-10-09 22:46:20 +00:00
itohy 8444082915 This file is obsoleted by opl3sa3reg.h . R.I.P.
Sorry for spamming this list so much. :)
1999-10-05 03:55:08 +00:00
itohy 3d17e2f869 opl3sa3.h -> opl3sa3reg.h 1999-10-05 03:53:07 +00:00
itohy 4714c97382 YAMAHA YMF175x (OPL3-SA3) control register description. 1999-10-05 03:38:17 +00:00
itohy 55360c0ac0 - Fix wait for ready code.
- Mute wave output, not the mixer output, on changing CODEC settings.
- Add support for muting wave output while playback or monitoring is inactive.
- Change formula of calculating gain so that all the levels should be
  used equally (the old code uses the min/max gain only at 0/255).
- Cleanup
1999-10-05 03:35:12 +00:00
itohy dae2f73780 Add support for muting wave output while playback or monitoring is inactive.
Cleanup.
1999-10-05 03:31:35 +00:00
itohy a13ace8bac Add power control hooks. 1999-10-05 03:29:22 +00:00
thorpej da257060f5 Avoid silly namespace collision w/ some Alpha signal-related variables. 1999-10-04 23:57:32 +00:00
augustss d81ed72642 Implement program change. From Martin Cernohorsky <cerno@ics.muni.cz>. 1999-10-04 19:31:39 +00:00
thorpej a3ef0b7a6d Fix compilation of ISA bha front-end. PR #8528, Takahiro Kambe. 1999-10-01 18:17:12 +00:00
ad e8d7fe2144 - Save SCSI status in the request.
- In dpt_intr(), if no interrupt is signalled but the HBA has indicated
  that more data will be available soon (HA_ST_MORE), save a context switch
  and wait for the data.
1999-10-01 12:20:12 +00:00
ad 0263e62bc4 Rename HA_ST_INDEX to HA_ST_MORE (More data available soon). 1999-10-01 12:08:51 +00:00
itohy 81bfa8dd74 Fix MIX_ATTEN_MASK value so that monitoring should work correctly. 1999-09-30 23:30:15 +00:00
thorpej 415b44a62a Rework the Buslogic SCSI driver in preparation for some pending improvements
to the SCSIPI subsystem.
- Determine more characteristics about the board, including the number
  of concurrent commands that the processor can execute at a time.
- Rework memory allocation strategy so that we can do dynamic pre-allocation
  of resources according to workload.

Thanks to the Linux Buslogic driver for having some useful comments.
1999-09-30 23:12:28 +00:00
thorpej fe12736867 Update for SCSIPI changes. Note that capabilities update is disabled
until Matt Jacob has a change to update the driver for the latest
firmware, etc. since update device parameters seems to fail once the
system is really up and running, and eventually causes the controller
to wedge.  This may be due to a firmware bug.

Per discussion with Matt.
1999-09-30 23:06:18 +00:00
thorpej 63b8530b4e Update for SCSPI changes. 1999-09-30 23:04:39 +00:00
thorpej 8bc5c71e5f Set the LED mode per the EEPROM on Macronix chips. 1999-09-30 22:28:11 +00:00
thorpej 2492ffef4c Changes to get the Lite-On/Macronix 82C115 working:
- 82C115 has a 128-bit multicast hash table, not 512-bit.
- Correct the way the MAC address is read from the SROM, after re-reading
  the MX98715A Application Note.

Other semi-related changes:
- Differentiate between MX98715 and MX98715A.
- Improve the Macronix link-up/link-down detection.
1999-09-30 17:48:24 +00:00
thorpej ac2360fb09 - Improve the comments that describe the various clone chips.
- Add some more Macronix register bits.
- Define the Lite-On/Macronix 82C115 ``PNIC II'' registers.
- Add the ADMtek AL981 PHY register bits.
1999-09-30 17:41:39 +00:00
ad 19bd684e8a - Remove a couple of items from the TODO list.
- Add a debug check to dpt_poll() (CCB must have CCB_PRIVATE set).
1999-09-30 17:15:54 +00:00
thorpej 61e04b2510 Add link-up/link-down detection for the Macronix NWay block. 1999-09-30 00:07:29 +00:00
thorpej 9d911ccd55 Add some optional stats gathering, and fix tx stats counting; use the last
descriptor in the packet, not the first.
1999-09-29 23:11:36 +00:00
thorpej 56fb88a64a Grumble, yet another chip-designers-and-manual-writers-disagree. Deal with
this by frobbing the 10TCTL register minimally, toggling only the bit we
care about (and hoping that link-capability advertisement happens correctly).

MX98715 can talk to the network now.
1999-09-29 22:07:47 +00:00
ad 122919c087 Install dptreg.h, dptvar.h. 1999-09-29 20:46:41 +00:00
thorpej e3398d3647 - Get a little closer on the Macronix chips. Still some more work to do.
- Add some basic support for the ADMtek AL981 clone (which, unfortunately,
  I can't test until my sample boards arrive).
1999-09-29 18:52:19 +00:00
thorpej bbd3e72fbc - Add register definitions for the ADMtek AL981.
- Add a comment about the Macronix MX98713 -- it's almost exactly like
  a 21140A, and doens't have the Nway registers that the other Macronix
  chips have.
1999-09-29 18:50:39 +00:00
ad f6e42db75a - Move initial reset code into dpt_readcfg()
- Bus specific front-end is now responsible for reading EATA configuration
- EATA configuration data is now saved in the softc
- Make synchronous writes work properly
- Don't ignore HBA timeouts in dpt_cmd()
- Prefix eata_cfg's members with `ec_', not `dc_'
1999-09-29 17:33:02 +00:00
ad 51de3bc208 PCDISPLAY_SOFTCURSOR: remember state of cursor during full screen scroll. 1999-09-29 17:29:24 +00:00
ad e2bdb5f380 PCDISPLAY_SOFTCURSOR: invert foreground too. 1999-09-29 17:26:06 +00:00
ad 9876b8900e - Fix some comments.
- Synchronous writes musn't linger in the HBA's cache.
1999-09-28 23:39:14 +00:00
ad 7064961321 - Add some profiling gunk.
- Add CCB_SYNC for CCBs where data must be written synchronously by the HBA.
1999-09-28 23:35:29 +00:00
thorpej 0bd09380a2 Oops, Macronix MX98713A doesn't have GPIO direction bits in the SROM
because it doesn't have a GPIO port (CSR12 is the `10baseT status'
register on this chip revision).
1999-09-28 21:56:45 +00:00
thorpej cca601b9b2 Make sure the Revision register contains the correct magic number.
From Chuck Cranor.
1999-09-28 17:55:33 +00:00
enami ee587c6c18 s/#define /#define<TAB>/. 1999-09-28 15:10:20 +00:00
ad 21a6ff6082 - Wait up to 2 seconds for HBA ready before executing CP_PIO_GETCFG
- Remove some unneeded memset() calls and assignments
- Fix comment on dpt_done_ccb()
1999-09-28 09:18:00 +00:00
ad 48a0b6237a A driver for DPT EATA SCSI adapters. dpt.c contains a brief TODO list. 1999-09-27 23:41:47 +00:00
enami bb03434a5f Support Planex Communications Inc, FNW-3600-T. 1999-09-27 23:19:12 +00:00
thorpej a5649fe4d5 Initial support for 21140[A] GPR media. 1999-09-27 19:14:01 +00:00
thorpej 848d8b7080 Add a media name pointer to the tulip_2114x_media structure, and define
a table for converting SROM media block type codes to ifmedia subtypes.
1999-09-27 19:03:59 +00:00
thorpej 1f0fa59202 - Define more "selected connection type" bits for the ISV SROM.
- Define ISV SROM bits for 21140[A] GPR media.
- Define a bitmask which includes media-related bits in the OPMODE
  register.
1999-09-27 19:02:50 +00:00
enami f449bb216c Change NE2000_USE_WORD to take pointer to softc rather than type. 1999-09-27 05:25:44 +00:00
enami 56a3e3e340 Minor cleanup; use the cached result instead of evaluating the
macro NE2000_USE_WORD twice.
1999-09-27 04:52:19 +00:00
enami 7fcb2b605a Define new macro NE2000_USE_WORD() and use it where appropriate. 1999-09-27 04:14:06 +00:00