775a0dd1d6
Sort SEE ALSO.
2010-10-29 09:34:03 +00:00
a9f3b6413d
Simplify the sysctl variable for BIOS switch policy, and document it
...
in acpivga(4). The previous hw.acpi.acpivga0.policy variable is
renamed into bios_policy for consistency, and is for ACPI_DEBUG only.
ok jruoho@
2010-10-28 21:45:02 +00:00
b39dfb61fd
As the ACPI specification is already mentioned in acpi(4), remove the note
...
about STANDARDS. Instead mention a Microsoft document that is specifically
about acpivga(4). Also xref vga(4).
2010-10-28 14:36:04 +00:00
7aeb582fb7
Correct section in xref.
2010-10-28 14:29:18 +00:00
5bf78beea7
Bump to the right date.
2010-10-28 09:49:01 +00:00
dc49246760
Xref CTASSERT(9).
2010-10-28 09:48:11 +00:00
f97f79d20f
Xref boothowto(8).
2010-10-28 09:44:58 +00:00
f32ca0cfec
Make acpi(4) debug aware of ACPI_DISPLAY_COMPONENT.
2010-10-27 14:39:26 +00:00
329476bc01
Nit-picks.
2010-10-25 07:36:45 +00:00
3dfc23e926
Bump date.
2010-10-25 07:34:30 +00:00
9ae31c4896
AEAP, ATEOTD, CU, DND, EOM, FNO, GBTW, GFU, GJ,
...
GL, HF, IYKWIM, JFTR, KOS, PPL, TTYS, WTG, YGM.
2010-10-25 06:14:10 +00:00
1a6b596853
+YAWPFAPR (you are welcome; please file a problem report)
2010-10-24 22:37:35 +00:00
a58da75ef7
+CG (center of gravity)
2010-10-24 22:36:41 +00:00
d37d98d5b7
reflect current reality.
2010-10-24 16:46:38 +00:00
6abecfc925
Link wmimsi(4) to acpiwmi(4).
2010-10-24 08:57:57 +00:00
117351d1b6
Add acpiwmi(4) mappings for MSI laptops.
...
XXX: It may be necessary to fix PR # 43659 before this works on all models.
2010-10-24 08:54:14 +00:00
777b76157e
Note acpivga(4). Small nits in SEE ALSO.
2010-10-24 08:31:49 +00:00
e7043d3268
Catch-up with code changes.
2010-10-24 06:57:04 +00:00
710a5b33d7
More TLAs and couple of FLAs: ARAT, CG, CHAP, CMOS, CPL, DEP, DL, DMI, DOS,
...
DPL, DRM, DSP, DTL, ECL, FFT, FG, GEM, ILP, ILP, IPS, KMS, LE, MIB, MIF,
MLC, NTP, OAEP, PAP, PCB, PDN, PKCS, PPU, PV, PVG, RC, RPL, RSA, RTL, SLC,
SLI, SMBIOS, SMI, TMO, TS, TSP, TTL, TTM, VA, VHDCI, VLIW.
2010-10-24 06:35:00 +00:00
4e92d558ef
The sysctl used to control panic-vs-reboot is in the hw tree, not in
...
machdep.
2010-10-23 03:27:03 +00:00
acec8b0574
Fix pkg-config substitution for glu
2010-10-22 16:48:38 +00:00
60fb8c1186
Fix Xrefs. Use more markup.
2010-10-19 12:53:23 +00:00
adb48c7f00
Build the new swsensor(4) device and add to set lists
2010-10-19 11:58:00 +00:00
3ae668c1c8
Add a new software-only sensor device. This is intended for use as a
...
kernel module, and can be helpful to generate sysmon_envsys events
when creating/modifying powerd scripts. This will also be used in an
upcoming series of atf tests for sysmon_envsys itself.
2010-10-19 11:55:38 +00:00
8091a14e54
note new controllers (as parents) bcsp(4) and sbt(4),
...
and new device (as child) btmagic(4)
2010-10-17 11:45:36 +00:00
532ca9579f
Use .In.
2010-10-16 12:05:48 +00:00
e6cdac9c4b
Implement dl_iterate_phdr.
...
Somewhat taken from FreeBSD. Manual page from OpenBSD.
2010-10-16 10:27:06 +00:00
3fd0b7cfed
Fix RCSID
2010-10-14 20:14:50 +00:00
81b0c07811
Add acpivga(4).
2010-10-12 23:01:55 +00:00
2b7d599723
manpage improvements
2010-10-11 15:15:57 +00:00
69f19b5c37
New sentence, new line.
2010-10-03 06:36:49 +00:00
7779c59157
Bump date.
2010-10-02 22:51:49 +00:00
83d7286ddf
Update agp(4) to reflect the agp_allocate modification.
2010-10-02 22:49:06 +00:00
07973faac9
New sentence, new line; sort SEE ALSO; use more markup.
2010-10-02 09:18:57 +00:00
11bdb89c6d
Add g760a fan speed controller driver.
2010-10-02 06:22:00 +00:00
6194fe731c
Fix a typo.
2010-09-29 22:38:34 +00:00
0bf49d4fec
Remove trailing whitespace; new sentence, new line; fix xref.
2010-09-29 14:34:07 +00:00
e4ed064c0d
make resolver.5 an alias to resolv.conf.5, since ours was better.
2010-09-29 13:50:49 +00:00
c12b4b5523
new from libbind
2010-09-29 13:44:33 +00:00
9c586fc7ca
Fix comments indentation.
2010-09-28 12:39:50 +00:00
f8a16a6578
hdaudio appeared in 5.1. Add xref to hdaudioctl(8). From rudolf.
...
Bump date.
2010-09-28 12:25:27 +00:00
71e8773dba
Bump date for previous
2010-09-26 18:52:52 +00:00
cc2db4f5f3
Collapse <abckslash><newline> sequences in /etc/ifconfig.xxx files read
...
by /etc/rc.d/network. Fixes PR 41662 by Christoph Badura, which was
also reported independently by Jeremy C. Reed.
2010-09-26 18:52:04 +00:00
f265a7c0e8
Add a collapse_backslash_newline function to rc.subr.
2010-09-26 18:37:14 +00:00
cc9bd058dd
Bump date for more supported I/O DATA devices.
2010-09-25 22:14:07 +00:00
e19d74b509
New sentence, new line.
2010-09-25 22:13:46 +00:00
50278ead3f
Add support for I/O DATA ETX-US2.
...
Patch from PR kern/43040.
2010-09-25 15:29:40 +00:00
23f45c39ba
Punctuation improvement, bump date for FAST_IPSEC description.
2010-09-22 17:59:35 +00:00
b76f3dc775
Mentions that IPSEC_DEBUG works with FAST_IPSEC implementation
2010-09-21 13:47:41 +00:00
4a785c3a1c
Mentions the FAST_IPSEC options
2010-09-21 13:46:41 +00:00
3392edf8b0
O2W is "off to work", from mrg@ and spz@.
2010-09-21 07:14:20 +00:00
e486642c97
AUDIO_WSEEK uses a u_long, not a int.
2010-09-19 10:34:33 +00:00
63012b51f1
NPF checkpoint:
...
- Add support for bi-directional NAT and redirection / port forwarding.
- Finish filtering on ICMP type/code and add filtering on TCP flags.
- Add support for TCP reset (RST) or ICMP destination unreachable on block.
- Fix a bunch of bugs; misc cleanup.
2010-09-16 04:53:27 +00:00
812c293086
add a note on IPL and spinning mutexes
...
TODO: explain when the IPL will be restored
2010-09-14 21:35:53 +00:00
469a737607
document ACPI_BLACKLIST_YEAR
2010-09-06 16:01:25 +00:00
1d94059094
Add RAS, CAS, VCC, ALE, REST, ONFI
2010-09-05 23:50:48 +00:00
82e82fca50
Add libc glue for libtre.
...
tre will be compiled without approx and wchar/mulibyte support to
only match the minimum requirement to replace our spencer regex.
This needs a lot of testing.
Only enabled when USE_LIBTRE is set to `yes'.
2010-09-04 12:17:58 +00:00
1720465890
Add a reference to Len Brown's 'ACPI in Linux - Myths vs. Reality' paper
2010-09-04 11:10:16 +00:00
e3511c5d1b
Grammar fix.
2010-08-27 18:05:16 +00:00
4328a42a43
Replace the example with something more generic and perceptual.
2010-08-27 09:13:38 +00:00
a8cdc50f5d
Fix PR kern/43765 from Scott Ellis.
...
Note that the solution is not optimal. If ichlpcib(4) provides SpeedStep
support, possible I/O resource conflicts may occur with acpicpu(4). Ideally,
as noted for instance in Windows design documents, ichlpcib(4) should never
expose SpeedStep when ACPI is being used. The probability for potential race
conditions is however very small, being limited to few P4-era machines and
being dependent on user actions.
2010-08-27 03:05:26 +00:00
99289f936d
Apparently, you have to #include <sys/param.h>, too, for MAX().
2010-08-26 16:42:28 +00:00
db8c589cdc
For MLINKS description, remove sentence saying they
...
are soft-linked (as it is not accurate).
2010-08-25 15:24:29 +00:00
3a12eae410
note that MODULE_CLASS_SECMODEL is also automatically deregistered when being unloaded
2010-08-25 06:45:35 +00:00
3b6fdb92e5
Move npf.conf(5-8) into the correct section, hence npf.conf(5).
2010-08-24 23:55:04 +00:00
42a7d04b04
Add native support for AMD family 0Fh processors. This is the furthest we
...
will go backwards; K7 will not be supported already due doubts about
availability and reliability of ACPI during that era. Some unfortunate code
duplication is present (but not overly much). Thanks to cegger@ and jakllsch@
for patiently testing this.
2010-08-24 07:27:59 +00:00
dfca43fdb9
Few small nits.
2010-08-24 05:34:15 +00:00
6c43668aa2
update component lists: scsipi is independent of umass now
2010-08-23 20:56:27 +00:00
09dba18788
Simplify.
2010-08-23 16:03:03 +00:00
578d32c924
Add more articles and more formatting.
2010-08-22 20:36:09 +00:00
2e6f2099c6
Import NPF - a packet filter. Some features:
...
- Designed to be fully MP-safe and highly efficient.
- Tables/IP sets (hash or red-black tree) for high performance lookups.
- Stateful filtering and Network Address Port Translation (NAPT).
Framework for application level gateways (ALGs).
- Packet inspection engine called n-code processor - inspired by BPF -
supporting generic RISC-like and specific CISC-like instructions for
common patterns (e.g. IPv4 address matching). See npf_ncode(9) manual.
- Convenient userland utility npfctl(8) with npf.conf(8).
NOTE: This is not yet a fully capable alternative to PF or IPFilter.
Further work (support for binat/rdr, return-rst/return-icmp, common ALGs,
state saving/restoring, logging, etc) is in progress.
Thanks a lot to Matt Thomas for various useful comments and code review.
Aye by: board@
2010-08-22 18:56:18 +00:00
7626bd9b32
Put a valid date here - no more placeholder.
2010-08-21 13:34:43 +00:00
4a743ad47d
Define a set of new kernel locking primitives to implement the recursive
...
kernconfig_mutex. Update module subsystem to use this mutex rather than
its own internal (non-recursive) mutex. Make module_autoload() do its
own locking to be consistent with the rest of the module_xxx() calls.
Update module(9) man page appropriately.
As discussed on tech-kern over the last few weeks.
Welcome to NetBSD 5.99.39 !
2010-08-21 13:17:31 +00:00
0bba56f8fb
Add x86 to Dt.
2010-08-21 10:38:51 +00:00
f7b06c8780
Move nmi(9) to the correct category.
2010-08-21 10:32:35 +00:00
e02e23b4b6
Uppercase Dt argument.
2010-08-21 10:13:33 +00:00
07deeab629
Add x86_msr_xcall(9).
2010-08-21 10:11:34 +00:00
ac6e5ea3d1
BCS, BIST, BSP, COF, CS, FEC, FID, HTC, IBS, IFCM, LINT, LVT, MC, MCQ, OOE,
...
PRBS, RX, TX, UI, VID, WDT, XBAR, XIP.
2010-08-21 06:10:37 +00:00
b88de53be5
Add COMPATIBILITY.
2010-08-20 06:35:55 +00:00
1f259dac99
BKDG, BP, COMA, CS, CSI, DSO, GOT, HMA, ISA, ORM, PMIO, SCI, TAS, UMA, UMB.
2010-08-18 17:01:55 +00:00
e0b2bd7bfb
Update.
2010-08-18 04:16:12 +00:00
c6f8bef851
Note that, for MODULE_CLASS_SECMODEL, the class is not ignored. Rather,
...
we will automatically call secmodel_register() for these modules.
2010-08-18 01:56:45 +00:00
0479cf6528
PR/43772: enami tsugutomo: __XCONFIGFILEMAN__ is left unexpaneded in
...
xinit(1)/startx(1)
2010-08-17 08:40:57 +00:00
3ed879f06c
filesystem -> file system
2010-08-17 06:44:25 +00:00
4de9b94cfd
A few corrections:
...
- the return value from modcmd(MODULE_CMD_FINI) is not ignored;
the module is only unloaded if the return value is 0
- if loading a module fails, the dependents won't be unloaded until
the auto_unload timer goes off
- clarify that <module>.prop is merged with the dictionary passed
in by modctl()
- clarify that other parts of the kernel shouldn't normally call
module_unload()
- add some more source references and mention routines expected to
be supplied by architecture dependent code
2010-08-17 04:09:07 +00:00
f08f09f7db
Use @NetBSD.org example addresses.
2010-08-16 12:54:20 +00:00
a89bed9efc
+ OSVW, PAT
2010-08-15 19:43:03 +00:00
0d458e7040
After a second thought, remove the references, clarify wording, fix acronym.
2010-08-15 19:34:50 +00:00
22d3a7d07b
BGA, DSDT, DVFS, FSB, GPE, GSI, HFM, HPET, LAPIC, LFM, MADT, MMIO, MPS, OBO,
...
OBOE, ODCM, PMI, SAPIC, TCC, TDP.
2010-08-15 19:30:33 +00:00
25c3593d4e
add new option to build/use tools/pigz for compressing sets. for now
...
USE_PIGZGZIP defaults to "no". (it depends upon local <pthread.h> and -lz.)
you can set it to "yes" on most modern platforms just fine.
2010-08-15 07:27:33 +00:00
7a40f55864
add/fix some transforms for some font, GL and xcb .pc files.
...
XXX: xcb still has pythondir=@pythondir@ in it.
2010-08-15 06:48:56 +00:00
af52251b80
Add some basic references that were used to write acpicpu(4).
2010-08-15 05:38:35 +00:00
a651852ead
Use capitals in a subtitle.
2010-08-15 05:17:39 +00:00
d0ca687ed1
Document T-states. One less item in CAVEATS.
2010-08-15 05:09:30 +00:00
efa04f9763
Sort sections, remove trailing whitespace.
2010-08-14 17:49:12 +00:00
f385c3dade
Add an Authors section
2010-08-14 17:06:58 +00:00
ffe6b7cdc1
We usually write "file system", so change it to this version here.
...
Also, fix a typo, and remove a line only consisting of ".Fn ".
2010-08-11 20:10:55 +00:00
7a8c7dc74a
Add documentation for the various module system initialization routines.
2010-08-11 18:20:09 +00:00
5fa58d5e62
Document the sysctl(8) controls with a note that these may be removed in
...
future versions without further notice.
2010-08-11 17:28:59 +00:00
6789718272
Call a flag flag, not argument.
2010-08-10 06:10:16 +00:00
75639e1021
Note the gathered statistics. One CAVEAT down.
2010-08-10 02:43:50 +00:00
943aec6199
Fix a typo. Sypported indeed.
2010-08-09 16:13:21 +00:00
f6a2c3c5c1
Group hyphens differently.
2010-08-09 10:57:23 +00:00
021de39995
Fix typo.
2010-08-09 06:40:33 +00:00
a11df9606e
Document P-states. Update notes about C-states. Shorten CAVEATS.
2010-08-09 06:36:18 +00:00
032d0f9a13
Remove trailing whitespace, and mark up file name suffix.
2010-08-08 15:23:28 +00:00
f792e9e485
Filling in a few more gaps.
2010-08-08 14:26:22 +00:00
a1e649e9b2
Note the acpiverbose module.
2010-08-08 05:02:59 +00:00
6241e2c44e
Add documentation for module_find_section()
2010-08-07 22:21:30 +00:00
6e861e80dc
don't forget to install bsd.ioconf.mk
2010-08-07 21:50:51 +00:00
11e43416a1
Add cosmote examples.
2010-08-07 20:47:27 +00:00
33d83c93fd
Wording, markup.
2010-08-07 16:41:34 +00:00
2016543bde
Don't use complete prototypes in FUNCTIONS. But use standard section headers.
2010-08-07 16:15:47 +00:00
898d3e0cf2
Remove AR9280 and AR9285 from the supported chips list.
2010-08-07 14:56:02 +00:00
5eae43f8ff
As the devices are listed in the body of the text,
...
remove the .Xref spam in SEE ALSO.
2010-08-06 18:54:50 +00:00
72795172e5
Like with mqueue(3), create and remove the aio(3) sysctl nodes dynamically.
2010-08-06 18:36:09 +00:00
db0aba6ecf
Move fwhrng(4) and ichlpcib(4) to the right category.
2010-08-06 17:00:12 +00:00
a3275768f8
Reference hpet(4).
2010-08-06 16:44:06 +00:00
ee62bcfb03
Add hpet(4).
2010-08-06 16:42:31 +00:00
5fa2c61005
CMI, DE, DS, DVB, EST, FFH, IOMMU, IPI, MCA, MCE, MID, MMX,
...
MSR, MTRR, NX, PBE, PSE, QAM, RT, SFI, SMM, SS, SVM, TSC, VMX.
2010-08-06 10:46:48 +00:00
51c2486418
Note acpicpu(4). Convert the list of devices to use .Xr.
2010-08-05 17:45:44 +00:00
a0b4611bb8
Add acpicpu(4). Describes the basic functionality (will be adjusted as the
...
functionality grows). Contains a big list of caveats as a TODO.
2010-08-05 17:31:10 +00:00
78d8efa894
Add amdpcib(4). Ok njoly@.
2010-08-05 04:58:26 +00:00
fe39a07b5f
Fix typo.
2010-08-04 18:52:49 +00:00
316bc64cb8
Rework the semantics in the reference.
2010-08-04 11:39:14 +00:00
da5cba2978
Improvements to wording, grammar, and markup.
2010-08-04 05:51:20 +00:00
eed27dd4f1
Move the TESTSBASE definition from bsd.test.mk to bsd.own.mk. Per joerg@'s
...
suggestion.
2010-08-02 07:08:26 +00:00
45a4c8de5d
Add the following cards' support from FreeBSD:
...
- Comtrol RocketPort 550/4, 550/8 and 550/16 series
- Lava Computers Quatro-PCI
- some NetMos NM9865 cards
- VScom PCI-200Li
2010-08-01 18:50:24 +00:00
d10a5f9ef8
Cleanup and sort if-clause lines for X11FLAVOUR per ${MACHINE}.
2010-07-31 16:23:15 +00:00
01a1e3e5d6
Unimplemented modcmd() routines should return ENOTTY, not zero.
2010-07-31 13:27:29 +00:00
fb03fbed90
Improve markup, add documentation for the module's modcmd() interface
2010-07-31 13:20:08 +00:00
d3d7f5a993
Switch hpcarm, hpcmips, and hpcsh to using X11FLAVOUR=Xorg.
2010-07-31 12:54:35 +00:00
4d71a95956
Crap - another typo.
2010-07-31 03:44:33 +00:00
44b6cc4347
Minor grammar nits.
2010-07-31 03:43:00 +00:00
31f0dbbb9e
Make a first pass at documenting the module(9) subsystem.
...
XXX This is by no means complete, but it is a beginning.
2010-07-31 03:14:05 +00:00
80ac55757e
Remove EXAMPLES-title (the example was not really an example). Use .Xr for
...
cpu_idle(9) instead of .Fn.
2010-07-31 02:12:20 +00:00
a058514370
Use .Ss for subtitles.
2010-07-31 02:04:45 +00:00
7b03aec152
Add kern.mqueue also to the big list of second-level nodes. Sort.
2010-07-31 02:00:49 +00:00
6649351d0e
Add ICH10 to the list.
2010-07-30 16:05:07 +00:00
6e80023335
Note that ICH9 and ICH10 chipsets are supported.
2010-07-30 15:46:56 +00:00
aaa806d431
another CAM; the "atomic" in CAS is implicit; add LL/SC
2010-07-30 13:32:24 +00:00
d448cd24f2
More: ARC, BLAS, CAM, CAS, HPC, LFU, LRU, MRU, SMT, SP.
2010-07-30 10:20:20 +00:00
1a6962b48f
Document the stack macros from <sys/param.h>.
2010-07-30 09:12:58 +00:00
7de8aff275
BMC, FWH, GAS, GMCH, ICH, IMC, LPC, MCH, TPM.
2010-07-29 18:36:34 +00:00
c4b5a963cf
Add fwhrng(4). Ok jakllsch@.
2010-07-29 18:25:19 +00:00
c28dcae1e0
Get rid of SYSCTL_SETUP.
...
We want the sysctl variables also when mqueue(3) is loaded as a module.
2010-07-28 20:49:12 +00:00
da35e56b54
Update list of supported chips and add additional chip addresses to the
...
config info in the synopsis. Also remove the xref to sysctl, since the
threshold values are now accessible within envsys framework.
2010-07-28 18:28:15 +00:00
db136ffc75
fix typo.
2010-07-26 12:50:52 +00:00
e31d462f48
Document the fine nullop() family of dummy functions.
2010-07-25 21:05:13 +00:00
175d1b7510
Bump date for PAE. New sentence, new line.
2010-07-25 07:09:02 +00:00
a3ce617f48
Document PAE.
2010-07-24 23:09:32 +00:00
453702d2c1
Add comma in enumeration.
2010-07-22 19:27:51 +00:00
01497b95ec
Convert swwdog(4) from a simple defpseudo device to a defpseudodev so
...
that we can attach a power management handler. The handler prevents
a suspend if the watchdog is active, to be consistent with other
watchdog drivers.
As discussed on tech-kern.
2010-07-22 14:10:14 +00:00
b143a68454
Bump date for XNS removal.
2010-07-21 11:08:10 +00:00
4919286485
Remove description about options XSERVER. No port uses Xserver on pccons.
2010-07-21 10:59:31 +00:00
7182e2d5cc
Remove description about obsolete XNS. PR misc/43635
2010-07-21 10:56:07 +00:00
1664eae7f3
Using vfinddev() leads to vnode races as it returns an unreferenced
...
vnode that may disappear before the caller has a chance to reference it.
Reference the vnode while the specfs cache is locked.
Welcome to 5.99.37.
No objections on tech-kern.
2010-07-21 09:06:37 +00:00
e698a5d246
Using cache_revlookup() leads to vnode races as it returns an unreferenced
...
vnode that may disappear before the caller has a chance to reference it.
Reference the vnode while the name cache is locked.
No objections on tech-kern.
2010-07-21 09:01:35 +00:00
8d81f5c19e
add some more transforms to the hacky ugly sed script for pkg-config files,
...
and note a few more that are not yet handled but should be.
2010-07-18 07:05:39 +00:00
4f2c95e76d
- add X11SHAREDIR definition
...
- X11SRCDIR's for libxcb, xcb-proto and xcb-utils
2010-07-17 22:53:29 +00:00
e2e9dc6ae8
Add three card support from Tsubai.
...
- Advantech PCI-1604UP (2S)
- InnoSys Keyspan SX Pro (4S)
- I-O DATA RSA-PCI2 (2S)
2010-07-13 23:46:19 +00:00
dad604ce0c
Implement Atffile automatic generation.
...
This change adds the ATFFILE variable, which can take the following values:
- yes: The source directory contains a static Atffile to be installed.
- auto: The Atffile is automatically generated.
- no: Do not install any Atffile (replaces the previous NOATFFILE variable).
The ugly bit of this is that I have to add a TESTS_SUBDIRS variable that
lists the subdirectories that contain test cases (so that they can be listed
in the Atffiles, without including auxiliary directories without tests).
This is a subset of SUBDIR.
Addresses a minor part of PR bin/43394.
2010-07-13 21:11:41 +00:00
299d82b760
Support xserver for prep.
...
It tested only s3(864).
2010-07-12 07:54:11 +00:00
6479f6e5b4
ldap is configured to depend upon MKCRYPTO no, so force MKLAP=no if
...
MKCRYPTO=no.
don't build pkg_install, libcrypto tests or rump_smbfs if MKCRYPTO=no.
mark librumpcrypto, rump_smb, pkg_*
fix set lists as appropriate.
2010-07-11 06:16:54 +00:00
d035cbb653
New sentence, new line. Remove trailing whitespace. Other minor fixes.
2010-07-08 21:33:02 +00:00
334666916a
man page for balloon driver from Cherry
2010-07-08 20:00:24 +00:00
387810580a
- Fix the frequency for Advantech PCI1620 port 4-8.
...
- Fix the mask for IBM SurePos 300
- s/Titan/VScom/
- Add the following cards:
- Avlab PCI 2 Serial
- Avlab Low Profile PCI 4 Serial (another revision?)
- Moxa CP-102/PCI.
- SUNIX 4036 2S
- Syba Tech Ltd. PCI-4S
- Syba Tech Ltd. PCI-4S2P-550-ECP
- PR#37299
- VScom PCI-010L
- VScom PCI-100L
- VScom PCI-110L
- VScom PCI-200L
- VScom PCI-210L
- VScom PCI-400L
- VScom PCI-011H
- VScom PCI-100H
2010-07-08 18:55:42 +00:00
f149405d02
Bump date.
2010-07-08 18:25:03 +00:00
2bb038d66a
- Fix an entry for CP-168EL-A/PCIe reported by Ryo SHIMIZU.
...
- Add an entry for NetMos NM9901 UART. Tested my own NM9901 card.
2010-07-08 12:09:31 +00:00
6f4b94ac85
- Fix a table for Advantech PCI-1620
...
- Add entry for PCI-1610 and PCI-1612
2010-07-08 08:49:54 +00:00
c5950a7d94
Cleanup and add some entries.
2010-07-08 06:13:58 +00:00
f5000f44ad
PCI-1620A-AE is not 4 ports card but 8 ports.
2010-07-08 01:05:09 +00:00
76a4e85145
- revert pucdata.c rev. 1.60 and add a new entry which checks subvendor code.
...
- Add the following cards' support (include fixing for PR#37566):
Advantech PCI-1620A-AE (4-port serial)
Decision Computer Inc PCCOM PCI 2 Port (2 port serial)
Decision Computer Inc PCCOM PCI 4 Port (4 port serial)
Decision Computer Inc PCCOM PCI 8 Port (8 port serial)
Exsys EX-41098 (4 port serial)
IO-DATA RSA-PCI2 (8 port serial)
Moxa Technologies SmartIO C168EL-A/PCI (8-port serial)
Moxa Technologies SmartIO C168EL/PCIe (8-port serial)
Moxa Technologies SmartIO C168U/PCI (8-port serial)
Moxa Technologies SmartIO CP104-EL/PCIe (4-port serial)
Multi-Tech ISI5634PCI/4 (4 port serial)
NetMos NM9835 UART (1 port serial)
NetMos NM9865 4 UART (4 port serial)
NetMos NM9865 UART (1 port serial)
NetMos NM9901 PCIe (single parallel)
Oxford OX16PCI958 (8 port serial)
SIIG Cyber 4 PCI 16550 (4-port serial)
SIIG Cyber 4S PCI 16C650 (20x family) (4-port serial)
2010-07-08 00:59:46 +00:00
02b671da36
Use .Xr for Xrefs.
2010-07-06 22:29:29 +00:00
a63798ea7c
Turn PMAP_NOCACHE into MI flag.
...
Add MI flags PMAP_WRITE_COMBINE, PMAP_WRITE_BACK, PMAP_NOCACHE_OVR.
Update pmap(9) manpage.
hppa: Remove MD PMAP_NOCACHE flag as it exists as MI flag
mips: Rename MD PMAP_NOCACHE to PGC_NOCACHE.
x86: Implement new MI flags using Page-Attribute Tables.
x86: Implement BUS_SPACE_MAP_PREFETCHABLE.
Patch presented on tech-kern@:
http://mail-index.netbsd.org/tech-kern/2010/06/30/msg008458.html
No comments on this last version.
2010-07-06 20:50:33 +00:00
3626443e21
Move the Delectable Test File System from share/examples/puffs/dtfs
...
to tests/fs/puffs/h_dtfs.
No functional change (apart from adjusting the Makefile for test builds).
2010-07-06 14:16:44 +00:00
14959b2e66
Reinstate the inactive operation (mostly dummy). This makes -i
...
work again and henceforth makes it possible to test inactive.
2010-07-06 13:56:40 +00:00
4c92852a80
remove almost all the ability to build netbsd with an a.out target.
...
we're ELF now, and there are many missing checks against OBJECT_FMT.
if we ever consider switching, the we can figure out what new ones
we need but for now it's just clutter.
this doesn't remove any of the support for exec_aout or any actually
required-for-boot a.out support, only the ability to build a netbsd
release in a.out format. ie, most of this code has been dead for
over a decade.
i've tested builds on vax, amd64, i386, mac68k, macppc, sparc, atari,
amiga, shark, cats, dreamcast, landisk, mmeye and x68k. this covers
the 5 MACHINE_ARCH's affected, and all the other arch code touched.
it also includes some actual run-time testing of sparc, i386 and
shark, and i performed binary comparison upon amiga and x68k as well.
some minor details relevant:
- move shlib.[ch] from ld.aout_so into ldconfig proper, and cut them
down to only the parts ldconfig needs
- remove various unused source files
- switch amiga bootblocks to using elf2bb.h instead of aout2bb.h
2010-07-06 05:59:50 +00:00
11a052c98f
Sort by name. No any addititon in this change.
2010-07-06 00:18:02 +00:00
7785abb6f3
Fix xref, put all Nd arguments on Nd line.
2010-07-04 21:10:39 +00:00
3aee62c28a
fix typo (firwmware -> firmware)
2010-07-04 19:58:52 +00:00
ac277a537e
Comment out an .Ed whose .Bd was itself commented out; this was making
...
mandoc belch.
2010-07-04 19:57:51 +00:00
a95d92a275
send routing messages via routing sucket -- works better than via inet sucket
2010-07-04 17:24:10 +00:00
c0f3dfaa52
Fix pointer assignment in previous commit (test compile works better
...
when you do it with the #defines which actually compile the code
in question).
2010-07-04 15:44:46 +00:00
54c71dee8c
Use a bit more than 1 byte of space for routing messages.
2010-07-04 15:31:04 +00:00
c3e7f27703
Add upgt(4), a driver for Conexant/Intersil PrismGT SoftMAC USB
...
IEEE 802.11b/g WLAN device, ported from OpenBSD by FUKAUMI Naoki:
http://mail-index.NetBSD.org/current-users/2010/05/28/msg013570.html
Slightly modified by me to use recently added config_mountroot(9)
to defer some device initialization until mountroot for firmload(9).
Tested on Sharp W-ZERO3 WS003SH with internal WLAN.
Note currently we cannot redistribute firmware files for upgt(4) so
they have to be downloaded and copied into /libdata/firmware/upgt manually.
See upgt(4) man page about firmware details.
2010-07-04 15:21:57 +00:00
58c4d50e83
Change xref from pfind(9) to proc_find(9). Bump date.
2010-07-01 15:12:31 +00:00
a94ff8e22c
Use .Fn instead of .Nm.
2010-07-01 15:06:55 +00:00
7965193037
Briefly document proc_find() and pgrp_find().
2010-07-01 14:54:44 +00:00
3cb6211465
Remove the now obsolete pfind(9).
2010-07-01 14:22:12 +00:00
951577ebd1
Provide a sysctl-knob for the Debug() opcode, hw.acpi.debug.object. This
...
prints debug-messages possibly used in the AML. Only enabled for ACPI_DEBUG
kernels.
2010-06-30 07:42:36 +00:00
f4cbf7d717
New sentence, new line; use more markup.
2010-06-29 15:05:43 +00:00
6b410bcd31
add mpls(4) manpage created with great help from wiz@
2010-06-29 14:10:04 +00:00
2e66cf95af
When importing a FreeBSD man page it's advisable to change the
...
synopsis to match our config grammar ...
2010-06-28 17:48:54 +00:00
e7d1f6ab2b
Grammar fix; remove indefinite article from Nd; don't Xr itself, use Nm.
2010-06-26 14:50:14 +00:00
10a750e953
Move testing instructions from afterboot(8) to tests(7) and change the
...
former to only provide a link to the latter.
2010-06-26 11:26:17 +00:00
929072d8ed
Add the tests(7) manual page, which describes why and how to run the
...
test suite and how to configure it.
2010-06-26 11:15:27 +00:00
cd9494c03d
Add config_mountroot(9) in autoconf(9) man page and LINKS for it.
2010-06-25 15:16:13 +00:00
eb5a8d18ab
Add uturn(4).
2010-06-24 16:37:48 +00:00
acf2047a2d
Add a uturn(4) man page.
2010-06-24 16:34:51 +00:00
1423e65b26
Clean up vnode lock operations pass 2:
...
VOP_UNLOCK(vp, flags) -> VOP_UNLOCK(vp): Remove the unneeded flags argument.
Welcome to 5.99.32.
Discussed on tech-kern.
2010-06-24 12:58:48 +00:00
f6c438ba23
Clean up vnode lock operations:
...
- VOP_LOCK(vp, flags): Limit the set of allowed flags to LK_EXCLUSIVE,
LK_SHARED and LK_NOWAIT. LK_INTERLOCK is no longer allowed as it
makes no sense here.
- VOP_ISLOCKED(vp): Remove the for some time unused return value
LK_EXCLOTHER. Mark this operation as "diagnostic only".
Making a lock decision based on this operation is no longer allowed.
Discussed on tech-kern.
2010-06-24 07:54:46 +00:00
4a8a89e213
Couple of grammar fixes.
2010-06-24 04:21:58 +00:00
e012a9fa38
Remove unnecessary whitespace.
2010-06-23 21:03:16 +00:00
daa18b081d
Update man page to sync with driver update.
2010-06-23 19:00:57 +00:00
6d1420650f
Sort prologue
2010-06-20 21:57:59 +00:00
88d56f4c97
- note that if MKINET6 is "no", MK11 must also be "no". we don't support
...
building X11 without inet6 support. the support to maintain patches to
generated files and other files is too great. PR#42856
- add TOOL_PIGZ, which defaults to the (not yet default) built tools/pigz.
2010-06-20 06:54:23 +00:00
1909f84b1c
- always install pigz. hooary!
...
- kill MKPIGZ.
- add MKPIGZGZIP. if it is "no", then only install pigz as pigz. if it is
not "no", don't install mrgzip, install pigz as gzip.
in all cases, the z* scripts.
i don't like the name MKPIGZGZIP so if anyone has a better name, feel free
to replace it. i don't care enough since killing the ugly name is just
more incentive to get pigz doing .bz2, .Z and .z.
2010-06-19 03:50:30 +00:00
2c090918c7
Remove the concept of recursive vnode locks by eliminating
...
vn_setrecurse(), vn_restorerecurse() and LK_CANRECURSE.
Welcome to 5.99.31
Discussed on tech-kern.
2010-06-18 16:29:01 +00:00
6fd7d9f8b8
Prevent build breakage if TESTSDIR is not defined (as in tests/modules/k_helper).
2010-06-18 13:14:21 +00:00
92a7fda174
Add a experimental "make test" target
...
make test may yield misleading results but should work in many cases. This
target is supposed to simplify the execution of tests but does not preclude
developers from running the installed versions.
Addresses PR misc/38326.
2010-06-18 10:10:57 +00:00
42a9c5d4fe
default MKPIGZ to "no", for now.
2010-06-17 06:17:02 +00:00
b6aa233709
ugh. this needs a real fix, but for now just update it to reality.
...
the diff -u is more obvious than a description:
-X11FLAGS.VERSION= -DOSMAJORVERSION=1 -DOSMINORVERSION=6 # XXX
+X11FLAGS.VERSION= -DOSMAJORVERSION=5 -DOSMINORVERSION=99 # XXX
2010-06-17 03:10:21 +00:00
e20e5913d6
Sort SEE ALSO.
2010-06-15 06:36:08 +00:00
839d06c021
Fix xref: timer_create(3) -> timer_create(2).
2010-06-15 05:29:52 +00:00
5c46dd73a9
tty support is in rumpkern_tty now
2010-06-14 14:48:51 +00:00
e1afe8ab7d
Fix a typo. Bump date for previous.
2010-06-10 18:34:21 +00:00
d6bb1884f1
Reference aps(4) and thinkpad(4) with each other.
...
In aps(4) note that sensor values are refreshed every 0.5 seconds, which may
have a negative effect on battery life.
(Since the sensors are purely descriptive and no time-sensitive protective
measures are being carried out, it would probably be a good idea to remove
the whole callout(9) from the driver and let the sysmon's poll cycle take
over.)
2010-06-09 13:44:24 +00:00
43b100a118
document the acorn26, i386, ia64 and vax ddb commands in both the builtin
...
help and in ddb.4. fixes PR#38304, PR#38305, PR#38309 and PR#38313.
2010-06-09 02:48:52 +00:00
a4259da5ea
Note that MKZFS is actually "yes" on i386/amd64.
2010-06-08 22:22:25 +00:00
2ef5124af4
Add FUNCTIONS. List only complete prototypes in SYNOPSIS. Sort SYNOPSIS
...
according to the appearance in FUNCTIONS. Fix typo; cnm_trap() -> cn_trap().
Remove the .Va typedef struct cnm_state cnm_state_t; in SYNOPSIS. And some
miscellaneous markup improvements.
2010-06-08 19:44:28 +00:00
74f7e1dfe4
Offset indent the example.
2010-06-08 19:28:56 +00:00
a517ae186e
GDT, IDT, ISR, IST, IVT, LDT, LTR, MSI, SCI, SMI, TR, TSS.
2010-06-08 12:52:51 +00:00
c99ce241db
Remove the unnecessary example.
2010-06-08 09:02:55 +00:00
f484940420
Put also powerof2(9) to SEE ALSO.
2010-06-08 09:00:51 +00:00
b052be6bc7
Xref ilog2(3) and imax(9).
2010-06-08 09:00:22 +00:00
0e7140d8d0
Xref ilog2(3).
2010-06-08 08:55:46 +00:00
a88b2930dc
Document ilog2() from <sys/bitops.h>.
2010-06-08 08:51:08 +00:00
015c6ebc3b
Three small markup improvements.
2010-06-08 08:20:37 +00:00
ae0570abb9
Fix xref.
2010-06-08 07:20:20 +00:00
d823f37213
properly document alpha ddb "mach" commands. PR#38303.
2010-06-08 06:14:57 +00:00
338ce8774a
Xref mq(3).
2010-06-08 06:11:05 +00:00
0b44becf58
Ups. Fix wrong filename suffix.
2010-06-08 05:56:58 +00:00
b2a0054edc
Xref bintime_add(9).
2010-06-08 05:50:01 +00:00
6d00e6b5dc
Briefly document the bintime_add() family of static inline functions.
2010-06-08 05:40:26 +00:00
1855c8357a
Create a manpage for igphy(4). kern/35398.
2010-06-08 05:38:32 +00:00
eb3f5b5845
Don't unnecessarily clutter the SEE ALSO.
2010-06-08 05:20:35 +00:00
5371f8534e
Remove SIOCGIFADDR. Noted by Ross Patterson in PR kern/21513.
2010-06-08 04:11:06 +00:00
e5f1d72bb7
Grammar, markup.
2010-06-08 04:08:37 +00:00
d7ca51b758
Add a missing word.
2010-06-07 18:40:16 +00:00
7f12a1eac3
Note ACPIVERBOSE. Use lower case letters in .Ss subtitles.
2010-06-07 08:39:04 +00:00
62bfdd2b21
Change layered file systems to always pass the locking VOP's down to the
...
leaf file system. Remove now unused member v_vnlock from struct vnode.
Welcome to 5.99.30
Discussed on tech-kern.
2010-06-06 08:01:30 +00:00
315bed49a4
note that sun2 has the same ddb mach commands as sun3/sun3x. part of PR#38310
2010-06-06 03:26:57 +00:00
3ace57c17b
Add definitions for TOOL_MANDOC_* for standalone users. Requested by
...
dyoung.
2010-06-04 20:19:39 +00:00
727dd8cd9e
Simplify build of shell-based test cases: atf-compile is gone.
2010-06-04 08:35:09 +00:00
2d399c649e
Needs additional single quotes to keep the double qoutes. Magic...
2010-06-03 10:08:34 +00:00
826b0b1f17
XORGVERSION should be a single quoted expression as it represents a
...
single argument for .TH
2010-06-02 19:40:12 +00:00
e4c9126b4d
Install mdocml's default CSS as /usr/share/man/style.css. Switch HTML
...
man pages to use mandoc unconditional as it gives reasonable output for
all man pages, not only a subset of mdoc(7). Use the newly installed
style.css for formatting and produce hyperlinks for .Xr.
2010-06-01 23:29:09 +00:00
5f6c2c6a0f
Use .An.
2010-06-01 11:34:02 +00:00
60417a4357
Add a man page for the hp700 lcd(4) driver.
2010-06-01 10:24:14 +00:00
wiz