Commit Graph

71 Commits

Author SHA1 Message Date
lukem 0635de35a3 Remove KDIR=, since SYS_INCLUDE=symlinks and KDIR are not supported any more. 2002-11-26 23:30:07 +00:00
scw 61724834f9 Fix a typo to make this compile with MEMSIZE is defined. 2002-11-25 11:26:22 +00:00
simonb 8ae9336efc Keep the knowledge of the H/W interrupt 5 event counter local to
interrupt.c.  This change also unmasked the fact that the Alchemy
boards did not initialise this counter.
2002-11-10 15:21:51 +00:00
jdolecek 5ab7d519a3 now that mem_no is emitted by config(8), there is no reason to keep
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies
2002-10-28 13:33:07 +00:00
elric d19d268a95 assign majors for raw and cooked cgd's. 2002-10-04 18:28:24 +00:00
thorpej 0c1efadb23 Include <sys/param.h> so that we get the defn of NULL. 2002-10-03 01:57:24 +00:00
thorpej bd5bb4652b Add trailing ; to CFATTACH_DECL 2002-10-02 15:45:10 +00:00
thorpej c5e91d447d Use CFATTACH_DECL(). 2002-10-02 04:55:47 +00:00
thorpej f59e5352f2 Use CFATTACH_DECL(). 2002-10-01 04:21:32 +00:00
thorpej c4cbfcf060 Use CFATTACH_DECL(). 2002-10-01 02:54:11 +00:00
thorpej 9a711d6985 Declare all cfattach structures const. 2002-09-27 20:29:02 +00:00
provos 0f09ed48a5 remove trailing \n in panic(). approved perry. 2002-09-27 15:35:29 +00:00
thorpej 6c88de3b53 Introduce a new routine, config_match(), which invokes the
cfattach->ca_match function in behalf of the caller.  Use it
rather than invoking cfattach->ca_match directly.
2002-09-27 03:17:40 +00:00
thorpej d1ad2ac4f2 Rather than referencing the cfdriver directly in the cfdata entries,
instead use a string naming the driver.  The cfdriver is then looked
up in a list which is built at run-time.
2002-09-27 02:24:06 +00:00
thorpej 3280b330bb Get the pointer to the driver name early, rather than constantly
deferencing the cfdriver pointer.
2002-09-26 20:18:24 +00:00
simonb 63096043b3 Use "#define\t" instead of "#define ". 2002-09-22 08:30:56 +00:00
lukem 3ea2e21f82 enable USERCONF by default; it's small and extremely useful to have available. 2002-09-18 02:43:53 +00:00
simonb 6ebf56cc52 Use AU1500_MAC0_BASE as well as a test for setting the MAC addresses
of the on-chip interfaces.
2002-09-11 08:30:48 +00:00
simonb e2125ae174 Share disksubr.c across all evbmips "ports" (it was identical). 2002-09-09 06:40:40 +00:00
simonb 221f834ea3 Remove some unused code. 2002-09-09 06:36:39 +00:00
simonb 0f1300fa95 Remove commented-out NFS_BOOT_RWSIZE option. 2002-09-09 02:36:11 +00:00
gehenna 77a6b82b27 Merge the gehenna-devsw branch into the trunk.
This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

	device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
  by using this grammer.

- Added the new naming convention.
  The name of the device switch must be <prefix>_[bc]devsw for auto-generation
  of device switch tables.

- The backward compatibility of loading block/character device
  switch by LKM framework is broken. This is necessary to convert
  from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
  We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
  the LKM framework will refer it to assign device major number dynamically.
2002-09-06 13:18:43 +00:00
simonb 284c3f4875 It's the gt64120, not the gt62140. 2002-08-29 08:02:35 +00:00
simonb b888bfcc0e Remove some commented-out include files. 2002-08-28 02:27:11 +00:00
thorpej 139cdc3125 Make nbuf, nswbuf, and bufpages unsigned. Make all operations on these
variables unsigned, and update places where their values are printed.
2002-08-25 20:21:33 +00:00
briggs 0b956d0b8b Implement pmc(9) -- An interface to hardware performance monitoring
counters.  These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.

pmc(9) is meant to be a general interface.  Initially, the Intel XScale
counters are the only ones supported.
2002-08-07 05:14:47 +00:00
simonb bf71dff7b9 Convert to use merged mips cpu_sysctl(). 2002-08-05 01:33:36 +00:00
simonb d67404d97e Fix tyop. 2002-08-05 01:15:22 +00:00
simonb 6fbeccd902 Make this compile for the non-sbmips case. 2002-08-04 14:42:56 +00:00
gmcgarry 3647e0d293 Merge cpu_sysctl() for all mips ports, based on powerpc and m68k precedent.
For now, only pmax implements CPU_BOOTED_KERNEL.  Need to revisit.
2002-08-04 01:41:23 +00:00
simonb 34b375c0dd Add kttcp, sysmon and broadcom/sibyte devices. 2002-07-31 03:42:54 +00:00
simonb 10a72d78d1 Add support for the Alchemy Semiconductor Pb1000 evaluation board for
their Au1000 CPU.  Should also work with little or no tweaking for the
Pb1500 board for the Au1500 CPU as well.
2002-07-29 16:22:55 +00:00
simonb 3f8c0bc7c5 Move the soft interrupts IPL masks from port-specific code to
board-specific code.
Change a u_long to a uint32_t in the timer calibration routines.
2002-07-29 16:21:03 +00:00
simonb c61cf25192 Remove prototype for non-existant softintr_dispatch().
Add/modify a few comments.
2002-07-29 16:14:05 +00:00
simonb 99eb5608ad Don't install intr.h isa_machdep.h pci_machdep.h rnd.h for userland. 2002-07-29 15:52:46 +00:00
simonb 13c96f8103 Split out the {b,c}dev to a separate file, which many devices declared
conditionally so that other eval boards (say without PCI support) can
share the basic "conf.c".
2002-07-26 03:23:04 +00:00
thorpej 3912e469dd Rename cdev_systrace_init() to cdev_clonemisc_init(), so it can
be properly used by any misc. cloning device.  While here, correct
a comment to indicate that "open" is the only entry point and that
everything else is handled with fileops.
2002-07-19 16:38:14 +00:00
simonb 0e084cea1c Add a comment; fix white-space niggle. 2002-07-12 00:40:00 +00:00
simonb bb0c5d7d98 Don't need to include <sys/malloc.h>, <machine/locore.h> or
<uvm/uvm_extern.h> here.
2002-07-12 00:27:18 +00:00
simonb 85c8470e73 Fix a typo in a comment. 2002-07-12 00:23:04 +00:00
simonb 00f3022be0 Remove unused MCLOFSET define. 2002-07-11 13:36:45 +00:00
christos 3b50728cf4 MD systrace gluons. 2002-06-17 16:32:57 +00:00
lukem fde6ae6f04 Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"
2002-06-17 05:14:02 +00:00
simonb 97f56c7642 Don't install <machine/rnd.h>. 2002-06-06 03:30:56 +00:00
simonb 6b6e4f4f60 Simplify include files that just include <mips/locore.h>. 2002-06-05 06:18:34 +00:00
simonb 9cc65a96d0 3 ports are now using the reciprocal count divisor code now, move it
to <mips/cpu.h>, and add MIPS_SET_CI_RECIPRICAL and MIPS_COUNT_TO_MHZ
macros to use it.
2002-06-04 05:42:41 +00:00
thorpej 204183c0fa * Add "pcitag_t *pba_bridgetag" to pci_attach_args. This is set to
NULL for root PCI busses.  For busses behind a bridge, it points to
  a persistent copy of the bridge's pcitag_t.  This can be very useful
  for machine-dependent PCI bus enumeration code.
* Implement a machine-dependent pci_enumerate_bus() for sparc64 which
  uses OFW device nodes to enumerate the bus.  When a PCI bus that is
  behind a bridge is attached, pci_attach_hook() allocates a new PCI
  chipset tag for the new bus and sets it's "curnode" to the OFW node
  of the bridge.  This is used as a starting point when enumerating
  that bus.  Root busses get the OFW node of the host bridge (psycho).
* Garbage-collect "ofpci" and "ofppb" from the sparc64 port.
2002-05-16 01:01:28 +00:00
atatat d1b3852365 Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.
2002-04-25 15:06:20 +00:00
simonb f09098b78b Add a newline to a debug printf. 2002-04-19 01:14:17 +00:00
mycroft 558b4fb278 Switch from de to tlp by default. 2002-04-17 02:22:41 +00:00