55ef0eb8b9
Changed the name for resource id 0xfd45 to match the reality.
...
WI_RID_OWN_BEACON_INT -> WI_RID_CUR_BEACON_INT
2002-09-26 16:52:44 +00:00
92cd63769f
Make this build after "wi_ieee.h" has been changed.
2002-08-11 12:16:27 +00:00
a819d2296f
Use __RCSID() and __COPYRIGHT().
2002-04-09 02:56:17 +00:00
56d2b07be1
fix channel list to be 1-14.
...
txrate parameter value determines the rate at which the
Probe request frames will be sent.
bit0 1Mbps
bit1 2M
bit3 5.5M
bit4 11M
2002-04-02 16:59:14 +00:00
6e4b27cd49
when no access points are available, explicitly state so
...
rather then printing a list heading and nothing else.
2002-03-04 01:28:09 +00:00
7ec184ce2e
print out channel list as a list of decimal channels rather
...
than as a bitmask printed as a single decimal number
2002-03-04 01:26:58 +00:00
1d7d73ee19
s/Kusec/msec/
2002-03-04 01:24:53 +00:00
aee0e0eba3
use all 4 bytes of result length when scanning APs.
2002-03-03 05:00:03 +00:00
eb0430f0ee
Fix a typo, and correct an abbreviation (Mhz -> MHz).
2002-02-06 19:07:27 +00:00
622875edb1
Revise wording about the -q and -c options per PR 12035.
...
Correct nroff nits, and fix some incorrect abbreviation usage
("i.e." was used where "e.g." should have been used).
2002-02-03 09:19:55 +00:00
3ee53752e9
It is missing fflush() when scanning the network and no avaible AP.
2002-01-28 22:07:30 +00:00
d08bc504d8
If WI_RID_SCAN_APS is not defined, then don't support it.
2002-01-25 17:17:21 +00:00
66a56d4efe
If the interface isn't up, up and scan.
...
then, down it when scanning is done.
point out from lha@stacken.kth.se , kern/15328
2002-01-22 02:09:11 +00:00
780b3934d4
display Beacon Interval of STA
2002-01-21 12:59:50 +00:00
1635f76bf6
forces if_wi to initiate one round of access point scan.
...
This code was written by jrb@cs.pdx.edu , modified and bug-fixed by ichiro@netbsd.org
2002-01-21 11:35:06 +00:00
d2eb889fd9
Whitespace nits; use standard headers.
2002-01-16 12:01:12 +00:00
34bf2039e8
Fixed the range of max data length (dot11FragmentationThreshold)
...
for -d option: 350..2304 -> 256..2346 (default is 2304)
Fixed the range of RTS/CTS threshold (dot11RTSThreshold)
for -r option: 0..2047 -> 0..2347 (default is 2347)
2002-01-16 06:54:17 +00:00
bbd072ffbb
s/^\.Are/.Ar/
2001-11-21 22:29:20 +00:00
eef5fa50d3
Big-endian support.
2001-05-16 10:45:36 +00:00
a420303a55
It enabled it to control roaming mode and authentication mode.
2001-05-15 04:16:21 +00:00
16aa429153
sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h
2001-05-06 03:28:57 +00:00
7557a03344
Don't xref old name of the command, just Ic it. Whitespace fix.
2001-04-03 11:42:40 +00:00
25bdbb661e
convert to use getprogname()
2001-02-19 23:22:40 +00:00
0d99070cf2
Change wi(4)'s default from ad-hoc mode to BSS mode. Also
...
some minor manpage fixes.
2001-01-11 19:33:51 +00:00
c40ad1440d
cast isprint() parameter to (unsigned char) - it looses if the character has high
...
bit set when the architecture is using signed char by default
This fixes bin/11556 by Michael Eriksson.
2000-11-24 09:53:36 +00:00
ebcd47ebf3
use .Xr
2000-11-07 05:44:50 +00:00
5056d0ce7c
Add support for "microwave oven robustness" with wiconfig -M.
2000-08-23 19:01:04 +00:00
f1cac3326d
Add our RCS Id and restore original Id.
2000-08-07 00:55:08 +00:00
2761069b0f
Confirmed the maximum length of the key for WaveLAN Gold cards is
...
13 characters, not 14. The 13 characters (104bit) secret will be
combined with 24-bit IV to consist the seed for 128-bit RC4.
Though maximum 14 characters can be configured in seven 16-bit hardware
registers, the last charactoer is apparently ignored both for encryption
and decryption.
2000-07-27 20:24:19 +00:00
3268786888
- Process all passed option rather than ignoring silently except the first one.
...
- Centerize the check whether an interface is specified.
- Print maximum data length.
- Swap wi_type and wi_code in struct wi_table so that wi_type matches with
wi_type in wi_req.
2000-07-06 03:37:26 +00:00
0b740ef377
beautify SYNOPSIS section with .Bk - .Ek pair.
...
correctly describe "no option" behavior (show 802.11 setting).
add comment about statistics update delay (-o).
TODO: should put \n after sentences
2000-07-04 05:20:03 +00:00
6412403c8a
Fix few typos.
2000-07-03 10:16:10 +00:00
d985c8daa6
Don't hardcode like "[ -v 1|2|3|4 ]".
2000-07-03 08:31:22 +00:00
cb94bf1d45
Update the description of available channel for Japan.
...
The regulations has been changed to adopt 802.11b since Oct. 99.
For 11Mbps NICs sold in Japan, all DS channels (1..14) are available.
2000-06-28 10:07:05 +00:00
88930abce1
Add support for the documented, but unimplemented, -a flag.
2000-06-24 04:15:49 +00:00
7c396cad70
When we steal an argument, just bump optind instead of copying
...
rest of argument vector.
2000-05-23 09:04:33 +00:00
a4563961cf
when setting the key, don't dump interface stats too.
2000-05-04 21:19:12 +00:00
f03b262b04
don't traverse NULL pointer on "wiconfig -p 1".
...
From: veego
2000-03-26 08:58:11 +00:00
f6ba8482dd
document OS versions
2000-02-04 08:01:43 +00:00
82cee51cf3
bring over WEP mode from FreeBSD/OpenBSD
2000-02-04 07:59:45 +00:00
66986619c4
Clean this up.
1999-07-23 19:06:54 +00:00
5d94c1dc69
Clarify that the empty string, not the string ANY, as the network name means
...
pick any access point
1999-07-15 14:31:52 +00:00
ebe6b12815
Tweak manpage to reflect wicontrol->wiconfig rename. (This, and all
...
previous commits of the wi driver, were done using the driver in
ad-hoc mode in the 34th floor bar of the SAS Radisson Plaza hotel in
Oslo, Norway).
1999-07-14 22:43:17 +00:00
7c00275166
Utility to configure wi* 802.11 driver
1999-07-14 22:33:33 +00:00
onoe