The ISA Bus on this machine doesn't support DMA, and all interrupt lines
are wire-OR'ed together. Mileage may vary if sharing interrupts.
Tested cards:
com: 8250 and 16550 UART's (8 bit)
ec: 3com Etherlink II (8 bit)
we: SMC 8013 Ethernet (16 bit) [work in progress]
Probes, ARP in both directions works, sends clean packets,
tcpdump show correct packets on receive, NDP for IPv6 works,
netstat -s shows nothing strange.. but doesn't talk TCP/IP!
- Correctly handle striding of data
- Better support for endian neutral access
- Correctly implement _stream variants of bus_space functions that can
byte swap. This reverses the automatic byte swapping done in hardware
for 16 bit ISA bus cards
- re-read RISC/os volume header off disk before writing new label
in case it was updated by installboot utility
- no longer keep a copy of the volume header in cpu_disklabel
This adds the missing wbflush() calls after writing register data.
At same time tidy up several comments and make several KNF changes.
XXX: The z8530 MI driver doesn't support bus_space access to the registers
(lacks a hook for storing a bus space tag, and stores register
addresses directly)
Until other ports catch up (this is the first) we have overlayed
the missing data in the MD structures
and link it directly to db_command_table[] so that it's not necessary
to do this at runtime. Make db_machine_command_table[] const on all ports.
g/c now unneded stuff, like db_machine_commands_install(), db_machine_init()
Patch written by enami.
is fussy about the order of sections and location of memory gaps so we
must produce a firmware friendly version of the kernel as netbsd.ecoff for
network booting
The ELF version uses the standard mips linker script which can be loaded
by the new bootstrap routines
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
