ab4edb55ec
Adapt for i386/x86 change.
2003-02-26 22:21:19 +00:00
f720949c2c
Adapt for move of files to arch/x86.
2003-02-26 21:33:36 +00:00
a33bcafdf1
Redirect some includes to x86/foo.h
2003-02-26 21:28:59 +00:00
cffd488563
Adapt for move of files to arch/x86.
2003-02-26 21:28:20 +00:00
9474297c7f
Clear 'big' bit of segment registers before returning to real mode.
2003-02-25 11:17:36 +00:00
4552b31f45
Clear 'big' bit of descriptors (%ss in particular) before switching to
...
16bit mode. Otherwise the 32bit %esp and (probably) %ebp are used for
stack accesses. (stupid cpu design!)
(approved by christos)
2003-02-24 23:23:14 +00:00
a5781fdcdf
Add LFS support for i386. Tested with a "newfs_lfs -A -O 256" root
...
filesystem.
2003-02-23 23:25:50 +00:00
860ed88533
#include opt_uvm.h in machine/vmparam.h (for those ports offering the
...
topdown option) so that including it directly before including
uvm/uvm_param.h (or uvm/uvm_extern.h which includes uvm/uvm_param.h)
and attempting to use topdown won't result in a compiler error.
Problem noted in private email.
2003-02-23 19:13:43 +00:00
11e36a204f
For x86_64, split the bootinfo memory entry words to avoid growth of the
...
structure due to alignment.
2003-02-23 02:45:44 +00:00
df0a9badc6
Introduce "top down" memory management for mmap()ed allocations. This
...
means that the dynamic linker gets mapped in at the top of available
user virtual memory (typically just below the stack), shared libraries
get mapped downwards from that point, and calls to mmap() that don't
specify a preferred address will get mapped in below those.
This means that the heap and the mmap()ed allocations will grow
towards each other, allowing one or the other to grow larger than
before. Previously, the heap was limited to MAXDSIZ by the placement
of the dynamic linker (and the process's rlimits) and the space
available to mmap was hobbled by this reservation.
This is currently only enabled via an *option* for the i386 platform
(though other platforms are expected to follow). Add "options
USE_TOPDOWN_VM" to your kernel config file, rerun config, and rebuild
your kernel to take advantage of this.
Note that the pmap_prefer() interface has not yet been modified to
play nicely with this, so those platforms require a bit more work
(most notably the sparc) before they can use this new memory
arrangement.
This change also introduces a VM_DEFAULT_ADDRESS() macro that picks
the appropriate default address based on the size of the allocation or
the size of the process's text segment accordingly. Several drivers
and the SYSV SHM address assignment were changed to use this instead
of each one picking their own "default".
2003-02-20 22:16:05 +00:00
b7f4f30f48
Revert previous (in line with <i386/mtrr.h> reversion).
2003-02-19 05:38:58 +00:00
d3fce65758
Reserve the I/O ports used by the CRT controller to keep them from
...
being allocated for other purposes such as PCMCIA I/O space. Fixes
port-i386/5177.
2003-02-19 04:07:56 +00:00
807c14b1f2
Undo constification of mtrr_funcs. I'll deal with it later.
2003-02-19 00:18:34 +00:00
f2ef2f16fa
Revert previous. This file is also used on x86_64, you see.
2003-02-19 00:15:19 +00:00
d2309c1fda
add file-system SMBFS and pseudo-device nsmb, uncommented, marked as
...
experimental
2003-02-18 20:13:03 +00:00
51762449f8
add nsmb device-major
2003-02-18 12:26:50 +00:00
9a38c06746
sync with GENERIC
...
add: options SYSTRACE
2003-02-17 22:44:37 +00:00
8f123087a2
Undo accidental commit of this file.
2003-02-16 17:42:13 +00:00
519f8f3d30
Add uax(4) (and url(4) in some cases).
2003-02-16 17:35:13 +00:00
673612c6a0
Use correct segment register in getmementry
2003-02-14 14:39:24 +00:00
1b76f8f55f
One more ServerWorks host bridge, seen on Dell PowerEdge server
...
fix provided in PR port-i386/20333 by Sverre Froyen
2003-02-14 14:26:51 +00:00
4e7944a9b0
use IPL_SCHED instead of IPL_HIGH to establish interrupt for ACPI;
...
Calling wakeup() from a intr handler established with IPL_HIGH may causes
run/sleep queue to confuse because SCHED_LOCK() uses splsched().
2003-02-14 05:38:39 +00:00
3f573e45ce
Instead of spinning, __asm __volatile("hlt").
2003-02-14 01:11:21 +00:00
ff410ba8d2
If no keyboard is attached, implement RB_HALT with a spin. kern/10481
2003-02-13 21:34:03 +00:00
6fcbbb426d
fix a lint stub
2003-02-09 15:49:34 +00:00
0d3ee12026
Fix the type of variable `mtrr_funcs' so that this file compiles again
...
after constify.
2003-02-09 13:03:38 +00:00
ced8cde749
make k6_mtrr_funcs, i686_mtrr_funcs and mtrr_funcs const
...
remove extern definition for i686_mtrr_funcs from include/mtrr.h, it's
not used outside mtrr_i686.c
2003-02-09 09:38:23 +00:00
1677351fab
match anything which claims to be PCI-EISA bridge
...
the explicit check for Intel PCI-EISA bridge was left in, just in case
it wouldn't identify itself as PCI-EISA bridge
fixes PR kern/9589 by Johan Danielsson
2003-02-08 12:00:36 +00:00
53d3dabb6a
Use on-stack buffer to check for 2.88MB floppy, malloc() hasn't been
...
loaded when this is called.
Clearly the information is actually available from the bios.
(Approved by christos)
2003-02-07 00:46:08 +00:00
eb9c846694
add makphy PHY for Intel gigabit cards (wm).
...
fixes PR install/19338 from Tomi Nylund.
2003-02-06 04:51:51 +00:00
bfd68d9702
Change to use .codw16/32 and ensure buffer address <64k
...
(approved by christos)
2003-02-05 21:50:25 +00:00
d77171664a
A buffer slipped though the net... Ensure offset < 64k.
...
(approved by christos)
2003-02-05 21:48:53 +00:00
7db25b39f8
Remove unused defines
2003-02-05 21:41:51 +00:00
e3e4805068
Replace machine/rnd.h with more appropriate name to share it
...
with cycle counter based microtime in kern/kern_microtime.c.
2003-02-05 13:57:50 +00:00
d364c62597
Switch to kern/kern_microtime.c , so these are no longer needed.
2003-02-05 12:42:01 +00:00
64eb1178ab
Share i386/tsc_microtime.c with alpha and sparc64 as kern_microtime.c.
...
(approved by martin)
2003-02-05 12:18:01 +00:00
085e223bb8
don't restore cpl at end of Xsoft*.
...
it's too early and allows recursive interrupts.
hopefully fixes PR 20180. (SAITOH Masanobu)
Ok'ed by Frank van der Linden.
2003-02-04 14:17:11 +00:00
b1e5771653
Trivial change, convert a tqh_first to TAILQ_FIRST().
2003-02-03 23:16:30 +00:00
f6909b984b
Revert my last change. While it actually allows a build to finish,
...
an iso-image created from the resulting release won't boot. I don't
know if this change is the source of that, but one more knowledgable
than I about the x86 booter needs to look at this, and I don't want
the waters muddied any more than necessary.
2003-02-03 03:03:16 +00:00
c6b14f1ca4
Add CPPFLAGS+= -D__daddr_t=int32_t.
2003-02-03 00:08:30 +00:00
a3b6bf84d6
Increase MAXFLENTRIES - the limit is being hit on some systems.
...
(approved by christos)
2003-02-02 21:08:55 +00:00
bf6f586096
Change comments to refer to increased default number of fragments
...
(approved by christos)
2003-02-02 21:05:15 +00:00
81acacd723
Change all .S files to use .code16 and .code32
...
Support 32bit addresses >64k as valid on bios calls.
Move stack for dosboot and biosboot to >64 so stack doesn't hit data.
Use disk sector number passed by mbr code to select default partition
(the mbr code doesn't do this yet).
NB only biosboot and dosboot have been tested so far.
(changes approved by christos and fvdl)
2003-02-01 14:48:16 +00:00
6d1101369a
- bump MEMORY_DISK_ROOT_SIZE from 2920 to 2960
...
in sys/arch/i386/conf/INSTALL_TINY
- bump IMAGESIZE from 1460k to 1480k
in distrib/i386/floppies/ramdisk-tiny/Makefile
so that "build.sh release" works again.
Suggested by simon, okay'd by luke.
2003-02-01 13:53:36 +00:00
c17467b083
Wrap 'old BSD id' warning in DEBUG ifdef.
2003-01-31 15:35:04 +00:00
84855a5789
Test _KERNEL_OPT before including opt_*.h files.
2003-01-30 19:59:29 +00:00
1ae2ac239d
Make the ld workaround work on x88_64, and add the temporary ld script
...
to CLEANFILES.
2003-01-29 18:44:47 +00:00
e3b243beb8
give some VM which was reserved for the UAREA but not used anymore back
...
to the user and adjust some comments (which were not accurate anyway
since NOREDZONE)
binary compatibility note: changing VM_MAXUSER_ADDRESS might influence
some sanity check in kvm_proc, where arguments on the stack are dealt
with, but it was a variable anyway and noone did care...
2003-01-29 14:12:35 +00:00
7bd6fd354d
unknown, not unkown. Noted by mjl.
2003-01-28 22:19:22 +00:00
00706969a9
Remove the 4k between code and data to increase the stack space.
...
Support for 64bit disk blocks seems to have exploded the code.
2003-01-28 16:21:58 +00:00
0b153da394
_bus_dmamem_unmap():
...
Sets the specified pages cacheable again because _bus_dmamem_map() might
change them uncacheable.
The code was provided by Dhoyashiki-san in kern/19919.
2003-01-28 08:46:53 +00:00
cd7d9faeaf
Introduce BUS_DMA_NOCACHE, and bus_dmamem_map() of i386 supports it.
2003-01-28 01:07:51 +00:00
ac44af9a88
Add the "ataraid" pseudo-device and the "ld" instances that attach
...
to it.
2003-01-27 22:31:12 +00:00
a3ff3a3038
Bump daddr_t to 64 bits. Replace it with int32_t in all places where
...
it was used on-disk, so that on-disk formats remain the same.
Remove ufs_daddr_t and ufs_lbn_t for the time being.
2003-01-24 21:55:02 +00:00
31fcb050d5
add another memory size detection routine, using int15, function 0xc7, which
...
is supported on later IBM PS/2 models; this is necessary to detect memory
over 64MB
thanks go to Pavel Cahyna for testing on his IBM PS/2 machine with 128MB
bump biosboot version to 2.15
2003-01-23 21:22:24 +00:00
1323e01ddf
use %e?x instead of %?x as 'xorl' arguments
...
use %al for 'movb' target, and 'andb' for masking the result with $0x02
since 'and' conveniently sets ZF, use 'and+jnz' instead of 'and+cmp+jne'
2003-01-23 21:01:18 +00:00
e6785a37e2
Increase time to wait for TLB IPI rendezvous.
...
Approved by: Frank van der Linden <fvdl@netbsd.org>
2003-01-22 18:32:18 +00:00
2bb5209b1b
lwp'ify
2003-01-22 17:48:02 +00:00
41ad61ee76
make KSTACK_CHECK_* compile after sa merge.
2003-01-22 12:52:14 +00:00
d4bff57bae
s/options^I^I/options ^I/
2003-01-21 02:44:15 +00:00
e83cbded11
add support for p1003.1b semaphores. From FreeBSD
2003-01-20 20:08:30 +00:00
3ef8fd67ee
this is too young to bitrot: LWPify
2003-01-20 18:43:18 +00:00
69ed85673a
We really don't need two vanity configs for BP6-based systems
...
("SWINGER" is the other).
2003-01-20 16:33:05 +00:00
ef1ca5d8b8
crank to 2240k; they've grown again
2003-01-20 01:39:02 +00:00
c369177127
Remove variable that is only assigned too but not referenced.
2003-01-20 01:29:18 +00:00
540020ec01
Don't need an extern declaration of phys_map; it's in uvm_extern.h.
2003-01-20 01:28:33 +00:00
b4509098d5
Put the storage class first.
2003-01-20 01:25:04 +00:00
5819507df3
Merge the nathanw_sa branch.
2003-01-19 16:30:13 +00:00
d9835f8fa4
Add "COMPAT_OSSAUDIO" option.
2003-01-19 10:42:54 +00:00
b4458473fd
Correct indentation error for "COMPAT_OSSAUDIO" option.
2003-01-19 10:42:06 +00:00
7b47c1bae4
add COMPAT_OSSAUDIO [for lkms that need it]. XXX: wish for /dev/ksyms
2003-01-18 22:33:29 +00:00
a50e3bc1cb
Merge the nathanw_sa branch.
2003-01-17 22:58:53 +00:00
c8763685b7
Allow the serial console boot blocks to be built with a specific
...
console speed, and build some of the more common ones.
2003-01-14 23:53:30 +00:00
f6f0dbd011
Stub out LIBCRT0, LIBCRTBEGIN, LIBCRTEND, and LIBC.
2003-01-14 23:51:34 +00:00
5692526bb6
Remove duplicate assignment.
2003-01-14 11:13:25 +00:00
d928619394
Add a couple more ServerWorks host bridges that explicitly need IO space
...
enabled.
2003-01-14 10:56:53 +00:00
28c12bee16
Actually return the number of found PCI interrupt routes in mpacpi_pcircount
...
(doh). From Wolfgang Solfrank.
2003-01-13 21:14:39 +00:00
991c0f3475
Install interrupt handlers properly when in apic mode.
2003-01-13 01:20:58 +00:00
86ae625e2c
Declare nioapics as well.
2003-01-13 01:19:34 +00:00
a4880cb372
Export the ioapic softc linked list, for the benefit of the mpbios code.
2003-01-12 23:20:17 +00:00
d43937377e
Handle all-apics entries for ioapic interrupts.
2003-01-12 23:19:44 +00:00
9cf4ee5aef
Move the check if ioapics were found outside of ifdef MPBIOS. Set the
...
polarity for the default ISA entries to 'default'.
2003-01-10 15:01:09 +00:00
599d302034
If the polarity wasn't set in the mp config entry associated with the
...
ioapic pin, assume defaults (active low for level triggered, high
for edge triggered).
2003-01-10 14:58:46 +00:00
3cef21b0f5
Pass acpi_softc down to mpacpi functions.
2003-01-10 00:45:52 +00:00
14cc29cd5d
Don't make assumptions about PCI bus numbers, carefully find all of
...
them before setting up the interrupt routing tables. This still
assumes that all bus numbers have been configured before this
is called.
2003-01-10 00:44:23 +00:00
4a7a63dba9
URL for devids.txt moved.
2003-01-08 23:50:23 +00:00
5543f31d4d
Fix indendation problem in entry for "pckbc* at acpi?".
2003-01-08 13:41:17 +00:00
864739bdee
DUMMY_NOPS is gone, replace it with an inverted, less confusing option:
...
PIC_DELAY. To be used on very old machines.
2003-01-08 13:20:26 +00:00
c873a9a9a1
Remove leftover debug "mp_verbose = 1" assignment.
2003-01-07 21:11:10 +00:00
013008be77
Wrap mpbios_scanned in the right ifdef.
2003-01-07 20:13:29 +00:00
06b5330bc7
Add MPACPI option (commented out). Add MPBIOS option by default, it is
...
needed now to do MP BIOS MP configuration.
2003-01-07 18:55:36 +00:00
a23660903d
Add code to configure cpus, ioapics and interrupt wiring using ACPI.
...
Shuffle some code around so that this an exist as a method next
to mpbios, both creating the same data structures. If both are
defined, try ACPI first.
2003-01-07 18:54:08 +00:00
d2dfe3f39a
Define acpi_md_callback. It retrieves interrupt routing info if the MP
...
BIOS wasn't already used for that (currently won't happen; ACPI gets
to try first if configured).
2003-01-07 18:52:43 +00:00
501607aeed
Disable ExtINT by default when using I/O APICs.
2003-01-07 18:51:15 +00:00
f33d911ff7
Don't use any cpu_info structures until at least one CPU was attached.
2003-01-07 18:50:13 +00:00
c2ff6d5b83
Add various external declarations to accomodate ACPI MP probing as an
...
alternate method to MPBIOS probing. Move some stuff common to the two
methods into mpconfig.h
2003-01-07 18:48:44 +00:00
87d5eedbbb
Delete reference to astpending, which doesn't exist any longer.
2003-01-07 09:57:01 +00:00
4d08051d29
*soren* remember <SPACE><TAB> in config files :-)
...
Space-Tab-ify ACPI examples.
2003-01-07 03:19:38 +00:00
1035faff1d
writable, not writeable.
2003-01-06 20:30:28 +00:00
4bb41ae2f2
Rework how KERNOBJDIR functions; now it's always determined with
...
cd ${KERNSRCDIR}/${KERNARCHDIR}/compile && ${PRINTOBJDIR}
This is far simpler than the previous system, and more robust with
objdirs built via BSDOBJDIR.
The previous method of finding KERNOBJDIR when using BSDOBJDIR by
referencing _SRC_TOP_OBJ_ from another directory was extremely
fragile due to the depth first tree walk by <bsd.subdir.mk>, and
the caching of _SRC_TOP_OBJ_ (with MAKEOVERRIDES) which would be
empty on the *first* pass to create fresh objdirs.
This change requires adding sys/arch/*/compile/Makefile to create
the objdir in that directory, and descending into arch/*/compile
from arch/*/Makefile. Remove the now-unnecessary .keep_me files
whilst here.
Per lengthy discussion with Andrew Brown.
2003-01-06 17:40:18 +00:00
9a3f5034cf
No more opms on i386.
2003-01-06 11:31:39 +00:00
52b083a154
Add symbolic names for MSR's used by SYSENTER/EXIT.
...
(I was experimenting a while back, might as well commit this one file..)
2003-01-05 22:47:13 +00:00
a731ae7dc4
add ACPIVERBOSE [commented out]
2003-01-05 22:31:13 +00:00
65c6c82f48
Document all known ACPI devices and options (disabled by default).
2003-01-05 21:44:32 +00:00
a250e57c96
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
...
"${RELEASEDIR}/...".
${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.
2003-01-03 15:34:30 +00:00
050140988d
Add commented out entry for acpi(4).
2003-01-02 12:36:51 +00:00
1132348b98
Use aprint_normal() for cfprint routines.
2003-01-01 01:24:19 +00:00
4b995bb9a4
fix for my sony laptop, which doesn't quite follow spec
2002-12-30 21:55:05 +00:00
20d271e712
TODO list, paraphrasing Jason Thorpe
2002-12-28 20:12:24 +00:00
2ae40935fb
The correct way to decorate objects with attributes is to use __attribute__
...
instead of the synonyms understood by gcc.
2002-12-28 20:11:57 +00:00
f69bc61a87
remove redundant declaration
2002-12-28 20:06:07 +00:00
8eb0fffdfc
Add an npx at acpi(4) attachment
2002-12-28 17:51:16 +00:00
13e7cd4f3f
Use i386_isa_chipset explicitly.
2002-12-28 17:36:59 +00:00
df719d72e4
NACPCA -> NACPI, so isa_dmainit gets called if we have ACPI support too.
2002-12-28 17:31:25 +00:00
6b5d7a7b6c
Remember the isa_chipset_tag_t and supply to isa_intr_establish.
...
(thereby removing a XXX in the code).
2002-12-28 17:13:39 +00:00
51ec27c813
Move the call to isa_dmainit to mainbus_attach from pnpbios_attach since
...
ACPI needs to have that done for the exact same reasons as ACPI.
2002-12-28 17:11:50 +00:00
c8111254a1
Pass ISA chipset information through to ACPI devices, to allow for porting
...
of pnpbios(4) glue to acpi(4).
2002-12-28 06:14:07 +00:00
f464631d66
Several things:
...
1) rights should be shared by the threads within a process. While it would
be easier to handle this with the struct proc/struct lwp split, we attempt to
do this now by sharing the right lists. Because each right holds a reference
to struct proc, this might cause some problems later.
2) in pthread_exit, really exit the thread. Also reintialize the righ tlist to
make sure we will not destroy the parent's right list
3) rights can hold multiple permissions on a port (ie: send and receive). Fix th
is.
4) first attempt on right carried by messages. We still have to do rights carrie
d in the message body (complex messages).
2002-12-27 09:59:24 +00:00
9f582c3342
Cosmetic changes to reduce diff against GENERIC.
2002-12-26 08:25:20 +00:00
41313fe244
#<space>comment...
...
Pointed out by collver1 via PR#18468.
2002-12-26 08:21:56 +00:00
4a06119a9d
Pass the system call table to trace_enter() and ktrsys() so that it is
...
possible to use alternate system call tables. This is usefull for
displaying correctly the arguments in Mach binaries traces.
If NULL is given, then the regular systam call table for the process is used.
2002-12-21 16:23:56 +00:00
899e58abe7
Bump ramdisk size to 2920 blocks.
2002-12-20 23:14:14 +00:00
5abd84e433
Use callee-saved registers in RAS processing.
2002-12-17 20:49:07 +00:00
7443ad1b01
Move to MI runqueue functions.
2002-12-17 19:47:15 +00:00
30f7194bc4
use the __HAVE_CPU_MAXPROC hook to limit kern.maxproc to number
...
of available GDT slots
add code in init386() to force maxproc to be maximum cpu_maxproc()
this fixes port-i386/1635 by John Kohl
2002-12-16 18:31:08 +00:00
4bd73a650e
Remove leftover declarations used for debugging purposes only.
2002-12-16 16:22:50 +00:00
b2622c34d6
In syscall_fancy(), drop the kernel lock if trace_enter fails.
...
From Nick Hudson.
2002-12-14 14:40:36 +00:00
16c0ce8d78
Fix comment.
...
De-__P().
2002-12-14 09:46:36 +00:00
058737862e
Now that gdt_compact() is gone, #if 0'ed gdt_shrink() doesn't need to be
...
here, either. Remove other #if 0 code as well.
2002-12-14 09:38:50 +00:00
0cc4fbf335
add twe control device
2002-12-13 23:26:47 +00:00
ac22ef18d8
Remove redundant cli/sti instructions. From Enami Tsugutomo.
2002-12-12 21:39:33 +00:00
61b8a488ba
Add empty shells of new functions so we can keep compiling.
2002-12-12 17:42:10 +00:00
09e9a5cde9
This new file is wanted by compat_darwin.
2002-12-12 17:41:53 +00:00
c9498dd93c
add missing dependency.
2002-12-12 17:41:19 +00:00
86b7f22e4f
cpuid feature bit 30 is set on IA-64 (in x86 mode)
2002-12-11 13:50:14 +00:00
a167f47c0c
Since a CPU may spin waiting for another CPU to handle an IPI, an
...
IPI must be the very first thing to be handled in splx(), if it
had been blocked before. Change things around a bit to guarantee
this.
2002-12-11 12:02:07 +00:00
c2afe21c94
Change from a hardcoded sanity check date that has to be updated by
...
hand every few years to code that uses the automatically generated
time value from config_time.h
Fixes an ancient XXX in the code.
2002-12-10 23:24:33 +00:00
e8cc3884de
Rename __LDPGSZ to AOUT_LDPGSZ, to accurately reflect what it is.
2002-12-10 17:14:02 +00:00
78ea2dd367
Use __LDPGSZ (which must be == USRTEXT) as the text address for a.out
...
executables, and eliminate the USRTEXT constant, which was only used
by the a.out exec code.
2002-12-10 05:14:24 +00:00
213339df22
Restore the cardbus config line. Cardslot is upset with pcmcia only.
2002-12-09 16:24:39 +00:00
21bf723223
comment out/comment/move p64h2apic line.
2002-12-09 15:50:57 +00:00
6189641f30
Don't want cardbus here, since there are no devices on it.
...
Thanks to Krister Walfridsson for mentioning it.
2002-12-09 02:38:13 +00:00
59773dea2e
Implement the DPT EATA ioctl() interface.
2002-12-07 19:48:30 +00:00
6b57b095ae
Identify many Intel processors which were misidentified previously.
2002-12-07 15:36:20 +00:00
721f8f7979
Print processor signature (id) after clock frequency.
2002-12-07 15:18:08 +00:00
a94542f191
Rename the commented out fwscsi -> sbpscsi (names changed once code was
...
committed)
2002-12-07 07:26:51 +00:00
43bc578d8b
Get rid of #ifdef CPUDEBUG. CPU signature is always displayed.
2002-12-06 17:53:52 +00:00
6e278393ba
Don't pollute struct cpu_info with throwaway variables.
2002-12-06 14:47:07 +00:00
df482bbd8a
Rename amd_cpuid_cpu_cacheinfo() to amd_cpu_cacheinfo().
2002-12-06 05:03:02 +00:00
281fa073dc
Display the extended feature flags with non-Intel processors rather than
...
the standard flags. See also PR#19163.
Before:
cpu0: AMD Athlon XP 1800+ (686-class), 1532.11 MHz
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
After:
cpu0: AMD Athlon XP 1800+ (686-class), 1532.11 MHz
cpu0: features c3cbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c3cbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbf9ff<FXSR,SSE,3DNOW2,3DNOW>
While I'm here, amd_cpuid_cpu_cacheinfo() is an info function rather
than a probe function.
2002-12-06 02:38:25 +00:00
fvdl