pk
401d03761f
Initialize automatics in stp4020print(); noticed by Jonathan O'Brien.
1999-03-29 21:30:48 +00:00
cjs
5ecfcfbb96
Make `sun4m DMA not supported yet' message print only for this device,
...
rather than every sbus device probed.
1999-03-29 12:04:43 +00:00
mjacob
d8aa229a12
roll internal release tag
1999-03-26 22:45:17 +00:00
mjacob
3cafeadabd
Add support for the PTI SBS430. It's a FAS200 type chip- it's a bit funky
...
in that the registers aren't spread by a longword like all the other SBus/ESP
cards. Otherwise it's much the same. It'll make Brad Salai happy.
1999-03-26 06:48:40 +00:00
pk
54ae4d24b8
Call bus_dma_[un]load() at splbio.
1999-03-23 00:38:15 +00:00
pk
d86e93c62a
Fix promiscuous modes - patches from Jason Wright.
1999-03-23 00:27:09 +00:00
eeh
b71ea6aad4
Use correctly bus_space_*() macros to access device registers.
1999-03-19 02:32:48 +00:00
mjacob
c312dfb410
prototype 1080/1240 support caused register offset rewhack
1999-03-17 06:17:16 +00:00
mrg
fbda6bed6d
make this compile on SUN4U. XXX icky, reader beware.
1999-03-09 00:42:20 +00:00
pk
87ae97e3f0
Fix what is probably a past-o.
1999-02-28 17:01:49 +00:00
pk
5c062abb64
Fix the bus print function.
1999-02-27 22:21:13 +00:00
pk
331694119a
Our device name differs from the PROMs node name.
1999-02-27 13:17:08 +00:00
pk
c6c74098d0
Don't try to use the MII routines for the internal PHY.
1999-02-19 14:57:00 +00:00
mycroft
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
mycroft
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
mjacob
1a911bb798
roll internal release level
1999-02-09 00:54:07 +00:00
mrg
4553ce553c
use <dev/sbus/sbusvar.h> not <sparc/dev/sbusvar.h>
1999-02-03 06:03:37 +00:00
mjacob
5c5ac2958f
roll internal release tag and finally use bus_space I/O
1999-01-30 07:10:38 +00:00
pk
2fa7bdbccd
Fix AF_NS code.
1999-01-18 13:29:01 +00:00
pk
fb846bde24
Share ring buffer code and data structure for be' and
qe' in
...
the QEC module. Adapt the QEC interrupt establish code to suit the
needs of the `qe' device.
1999-01-17 20:47:50 +00:00
pk
ad3176f350
Add `qe' network interface device.
1999-01-17 20:44:58 +00:00
pk
5e8fcd9428
Import Jason Wright's Sbus Quad ethernet (`qe') driver as found in OpenBSD.
...
Heavily pounded on by me to make it fit our driver model.
Also added: auto media selection; shared ring buffer code with `be'.
1999-01-17 20:44:18 +00:00
pk
6d1f55bc7a
Initial revision
1999-01-16 13:19:11 +00:00
pk
c830c88dd2
Convert to bus_space(9).
...
Add buffer allocations needed by the be driver.
1999-01-16 12:46:08 +00:00
pk
e0e761e420
Import Jason Wright's Bigmac driver, written for OpenBSD.
...
Heavily pounded on by me to make it fit our driver model.
1999-01-16 12:43:09 +00:00
kleink
a9b05361c1
Avoid arithmetic on void *.
1999-01-12 02:28:55 +00:00
mjacob
e618c0c7d7
turn on SBUS bursts
1999-01-10 06:22:12 +00:00
mjacob
d6cab14b00
clean up headers
1998-12-28 19:12:26 +00:00
pk
bb12def997
Use `pcmciabus' to attach the Sbus to PCMCIA bridge.
1998-11-26 15:33:29 +00:00
pk
2814b02ec8
Define STP4020 chipset driver by its nickname `nell'.
...
XXX - also define a `pcic' attribute here, so we can attach a pcmcia bus
1998-11-22 22:17:27 +00:00
pk
5e4ad115c3
The beginnings of a driver for the Sbus <=> PCMCIA bridge chipset STP4020.
1998-11-22 22:14:35 +00:00
thorpej
3b068a6c78
Adapt to the new scsipi_adapter interface.
1998-11-19 21:53:32 +00:00
thorpej
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
pk
1338a7e982
hwreset(): delay required after diddling the medium selection bit.
1998-09-26 08:31:20 +00:00
pk
ed652e2a09
Fix a silly yank-o.
1998-09-25 14:19:20 +00:00
pk
6da4cd8aac
Make dma_sbus.c dependent on dma_sbus attribute.
1998-09-23 08:48:25 +00:00
pk
f9e261c5e4
LSI63854 based parallel port driver skeleton.
1998-09-21 21:20:47 +00:00
pk
fa25d48556
Add `bpp' device: the parallel port glued onto the LSI64854 DMA controller.
1998-09-21 21:02:23 +00:00
mjacob
8fdc5aee4b
Make changes as required for new return values from dma setup routine
...
for isp. Unable to test in running kernel because they're not buildable today,
but should be okay.
1998-09-18 00:26:11 +00:00
pk
cf10308f5f
bootpath check needs to keep checking for two formats.
1998-09-15 20:26:25 +00:00
mjacob
8fec1fd696
add bustype tag to softc
1998-09-08 07:36:26 +00:00
pk
af17d22848
Missing bits in DEBUG mode.
1998-09-07 07:58:45 +00:00
eeh
199e474e95
Removed some spurious `long's.
1998-09-06 22:43:16 +00:00
eeh
c5b834a5bc
Do it right for a change.
1998-09-06 21:23:58 +00:00
eeh
b9ce59191d
Oops. Fix overenthusiastic macro.
1998-09-06 21:21:06 +00:00
eeh
484ce04810
The `address' field from the prom is really an unsigned 32-bit value.
...
Make it so.
1998-09-05 22:29:49 +00:00
eeh
c05097f947
Remove function name conflict.
1998-09-05 22:14:25 +00:00
pk
18da157aa9
Assign my copyrights to TNF.
1998-09-05 17:28:57 +00:00
pk
42ebb851c5
sparc64 uses more of this file.
1998-09-05 16:47:06 +00:00
pk
5038a72078
A few modest simplifications.
1998-08-31 11:13:54 +00:00