f2e57c6dc8
Eliminate remaining direct references to the z8530 chip
...
to allow the MD access functions to do delays, etc.
1996-01-30 22:34:52 +00:00
f261ae08c7
Update for the new z8530 driver
1996-01-24 22:39:48 +00:00
8f339409b7
sync with sparc:
...
- move disk_attach() to before reading the disk label as per Jason.
otherwise we are reading into an unallocated buffer (oops!)
1996-01-13 03:50:05 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
7e01b868cc
It's safe to use <dev/ic/ncr5380*.h> now.
1996-01-01 22:51:26 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
9ca6a401eb
Use the MI LANCE code.
1995-12-10 08:46:05 +00:00
5d5c8d0d4b
Latest, greatest version of the new NCR driver.
...
DMA works! Interrupts work! Disconnect/reselect works!
To be paranoid, leave that all disabled for now...
1995-11-17 23:27:41 +00:00
6b20139b41
Add copyright
1995-11-17 23:24:56 +00:00
3dcdca7c52
Allow unit != 0
1995-11-10 21:59:30 +00:00
b3a6cbaeb0
New from Chuck Cranor: drivers for SMD disks!
...
xd: Xylogics 753/7053 SMD disk controller
xy: Xylogics 450/451 SMD disk controller
These now compile, but have not been tested.
1995-10-30 20:58:04 +00:00
93d0f65970
New SCSI driver for the NCR5380, by David Jones.
...
Does DMA with interrupts. Much faster than our old
driver which did only PIO transfers. (Thanks David!)
Could be used on the amiga, and probably others...
1995-10-29 21:19:06 +00:00
f966527839
Work around the LANCE Rev. C bug in a way that does not cause error
...
messages when BPF puts the interface in to promiscuous mode.
1995-10-27 15:53:39 +00:00
df737690d7
Remove (again) things accidently revived by cvs tag...
1995-10-13 19:37:06 +00:00
09cbbafa0a
Minor cleanup.
1995-10-08 23:42:58 +00:00
f5bcca1fab
Machine-dependent part of the new RAM-disk driver.
...
This module lets one build a stand-alone kernel.
1995-10-08 23:42:42 +00:00
1b6586b2bb
Note that this should be merged with dev/ic/i82586reg.h
1995-10-08 23:41:36 +00:00
13fa3c4fe6
Temporary hack to restrict open to root or the
...
same UID as the session attached to /dev/kd
1995-10-08 23:40:42 +00:00
3c868e07f9
New DVMA interface, and various cleanup.
1995-09-26 04:01:53 +00:00
2666f17777
SCSI bus phase not valid until REQ is true (Fix from David Jones).
1995-08-14 20:00:00 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
c96c328a9d
Use old-style function definitions (like the sparc driver).
1995-08-08 20:54:08 +00:00
2a3eef935e
Improve handling of a device that "sits on" the bus (from Jason Thorpe)
1995-08-08 20:53:16 +00:00
ffe4785a58
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:33:32 +00:00
c4746effe0
Correct !DDB console abort (thanks to David Brownlee)
1995-07-03 02:52:13 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
3a59870c12
Leave modem control lines in correct state on interrupted open.
...
(From sparc/dev/zs.c)
1995-06-27 14:36:20 +00:00
f872dedb62
Catch up with net/if.h changes
1995-06-27 14:34:32 +00:00
64543c95b6
Fix several missing (and REQUIRED) calls to ZS_DELAY()
1995-06-13 22:11:33 +00:00
9b910268e1
Better reset code, and reset the chip when it goes comatose.
1995-06-01 20:22:17 +00:00
6e6f7ede65
Improve probe (should reject "sc" board now)
1995-05-24 20:52:27 +00:00
51e2d10bd0
Sunc with sparc version (adds key repeat capability)
1995-05-24 20:51:31 +00:00
20f34f40d2
Turn off IFF_MULTICAST for now...
1995-05-24 20:49:38 +00:00
29e0f797d4
Fix missing return(0) - from Jason Thorpe - fixes PR 1049
1995-05-24 20:47:41 +00:00
ac1a62db29
Add xxtty()
1995-04-26 23:20:15 +00:00
6d7bcdbd2a
Add work-around for LANCE Rev. C bug.
...
Needs to be fixed for multicasts...
1995-04-26 23:19:16 +00:00
ef7ca50d54
Make less noise about CRC/Framing errors (Sun3/50 gets lots of them).
1995-04-16 01:52:07 +00:00
06e64bc965
arpwhohas -> arp_ifinit etc.
1995-04-13 21:54:55 +00:00
6ab590ff6b
fix typo
1995-04-13 21:51:34 +00:00
369e66a776
Sync with the rest of the world.
1995-04-11 06:03:36 +00:00
3b6535707e
Use global 8530 defs.
1995-04-11 02:41:42 +00:00
89c2b367b3
Oops, sparc -> sun3
1995-04-10 22:11:22 +00:00
c126c9401f
Add a dummy kdstop().
1995-04-10 07:33:53 +00:00
795010b56c
map --> mmap
1995-04-10 07:04:18 +00:00
63dcb06933
Add promstop(), adjust return types, make sure ttselect() doesn't panic, and
...
obey standard style conventions.
1995-04-10 06:14:57 +00:00
ca5caf005a
map --> mmap
1995-04-10 05:45:26 +00:00
f0dfc32ae9
Sync with net/if.h changes
1995-04-09 05:08:33 +00:00
a1cc6d49c4
It works now.
1995-04-08 04:40:27 +00:00
d0d1dc8a4e
Fix that probe sequence right this time.
1995-04-07 05:19:24 +00:00
0af73b6fc3
Changed fb_attach() interface
1995-04-07 02:51:21 +00:00
gwr