Commit Graph

84652 Commits

Author SHA1 Message Date
mrg 31be837848 support kernel configs called `../../sparc64/conf/GENERIC32', and the like,
by stripping the dirname off by using ${configfile:C/.*\///} where necessary.
2001-08-23 14:37:02 +00:00
mrg 1e8c30ef94 update sparc64 (and some generic) set sizes to reality (gnu.tgz is
*much* larger for sparc64 now! :-).  remove the notes that PCI kbd/ms,
sbus audiocs, and fas support don't work because they now do.
2001-08-23 14:33:13 +00:00
tsubai e20342e78d Fix a bug introduced when machine_type.h was removed.
Now the kernel can read symbol table again.
2001-08-23 14:17:27 +00:00
tsutsui 2b566d5530 Remove note about 80P cable detection for Acard ATP860 from BUGS section. 2001-08-23 10:05:51 +00:00
tsutsui b6e4b26d3b Check 80 pins cable in acard_setup_channel() for Acard ATP860. 2001-08-23 10:02:25 +00:00
chs c540e9e70b add a missing pmap_update(). 2001-08-23 06:18:47 +00:00
chs 9fa41ab3b9 use cli/sti instead of splhigh/splx for MCOUNT_ENTER/MCOUNT_EXIT.
this makes clearer how much time mcount() is really taking.
2001-08-23 06:17:00 +00:00
thorpej ce0d046061 Regen; recognize the 79c972's 10BASE-T interface mapped onto MII. 2001-08-23 04:47:36 +00:00
thorpej b52818d607 The Am79c972 PCnet-FAST+ has its built-in 10BASE-T interface mapped
onto the MII bus.  Recognize it.
2001-08-23 04:47:05 +00:00
thorpej 29bfa727c1 Regen; take part numbers out of PCnet-PCI product descriptions. 2001-08-23 03:42:26 +00:00
thorpej 16efbbf387 Take part numbers out of the PCnet-PCI product descriptions. 2001-08-23 03:41:36 +00:00
thorpej 2c469bbf82 Regen; Add Promise ATA/100 TX2. 2001-08-23 03:32:24 +00:00
thorpej 915a8ef871 Add Promise ATA/100 TX2 device ID. 2001-08-23 03:31:55 +00:00
itojun 4d1509970e do not try to bring IPv6 up on bridge*. 2001-08-23 02:58:24 +00:00
wiz 74d0aad2a6 Add MAKEDEV(8) for netwinder, and the necessary directories. 2001-08-23 01:41:36 +00:00
wiz d75b059d14 Add man8.netwinder (for MAKEDEV.8), and descend into it. 2001-08-23 01:36:32 +00:00
wiz 8624e48221 Add /usr/share/man/{cat,man}8/netwinder. 2001-08-23 01:35:36 +00:00
wiz cec306e0cb regen 2001-08-23 01:32:34 +00:00
nisimura 4d28b238b5 Add MX (PMAG-A) and TX (PMAG-RO/PMAG[B]-J) supports and replace CX
(PMAG-B) code with one found in dev/tc/ directory.
2001-08-23 01:29:31 +00:00
nisimura 9a409cff3e Add MX (PMAG-A), CX (PMAG-B), TX (PMAG-RO/PMAG[B]-J) TC framebuffer
supports.  None of them has any acceleration capability.
2001-08-23 01:16:52 +00:00
itojun 2697773fb1 IFQ_PURGE cannot be used against ifqueue. use IF_PURGE. 2001-08-23 00:56:03 +00:00
matt d98bf76f56 Fix bootstrap loss of memory. Fix pmap_activate problem. Revamp debug
messages.
2001-08-22 22:17:57 +00:00
matt 28c81ffc15 7450 requires a sync before the the isync (MPC7450UM - 3.4.4.8) 2001-08-22 21:19:58 +00:00
matt ae5ab93687 Add 7450 recognization. 7450s use NAP mode. print out HID0 register
contents.
2001-08-22 21:09:05 +00:00
matt 076780a19c Include the 7410/7450 hid definitions 2001-08-22 21:05:25 +00:00
groo 37ffb3b127 begin executed --> being executed 2001-08-22 20:18:08 +00:00
thorpej 15dcb4a98e Link the kernel at 1MB. 2001-08-22 19:44:47 +00:00
thorpej 9f019df56f Allow a keypress on the console to transition from "halted" to "returning
to monitor".
2001-08-22 19:13:09 +00:00
matt 44c7bc97b4 Add some etc.netwinder support for netwinder. XXX Far from complete
but makes snapshots possible.
2001-08-22 18:34:48 +00:00
thorpej f0ea5cb1e9 Don't need to do the Alpha boot block checksum here :-) 2001-08-22 17:53:44 +00:00
hubertf 5366e197e2 More comment changes: 90x[B] -> 90x[BC] 2001-08-22 15:39:04 +00:00
hubertf d08ed3cb49 90x[B] -> 90x[BC] 2001-08-22 15:28:57 +00:00
msaitoh e380d9806e devclass of sci[f] is tty 2001-08-22 13:32:45 +00:00
simonb dc0e4c0679 Cosmetic cleanups:
- cominit() is local to com.c, remove prototype from comvar.h.
  - Don't prototype comstop(), cdev_decl(com) does this.
  - Don't use a block device switch table declaration(!).
  - No need to include "com.h".
2001-08-22 12:44:10 +00:00
ad a0fdfb54e0 Implement/fix FDDI, receive checksums, media selection and a ton of other
stuff.
2001-08-22 09:43:15 +00:00
ad 1d6329bb04 Parameter group changes:
- Do FIELD_SET correctly for scalar types.
- Add some basic table ops.
- Push error reporting back into iop.c.
- Add some field index and (yet more) LAN defs to i2o.h.
2001-08-22 09:42:05 +00:00
nisimura 153449a2b4 Restore icsr value assignment op which was lost since r1.21. 2001-08-22 09:20:38 +00:00
itojun de250bca38 copyright clarification (the skeleton file is in public domain) 2001-08-22 08:54:51 +00:00
itojun d5e1f166e0 sync with latest kame tree. snprintf() return value audit, log() cleanup,
and such.
2001-08-22 08:52:35 +00:00
nisimura 9fac675c1e Forgot to commit changes of intrcnt[] array and its indices. 2001-08-22 08:23:09 +00:00
itojun 9fe945f2fe sync argument/return type of [hn]to[nh][ls] to XNET 5.2 (uint{16,32}_t).
as discussed on tech-net.
2001-08-22 07:42:07 +00:00
nisimura d3320a155b NetBSD/pmax now has GENERIC_SOFT_INTERRUPTS. 2001-08-22 06:59:38 +00:00
itojun 029bd4843d sync with kame better. snprintf return value audit. 2001-08-22 05:24:37 +00:00
nisimura bd799bf74f Use ri->ri_hw field for TC module base address. 2001-08-22 05:15:58 +00:00
nisimura 1df3ced126 Move small storage for ev_name string into tcds_softc. 2001-08-22 05:00:27 +00:00
itojun 0aa75fa830 it seems that TOODIR change is yet to be reach the tree. i guess i leave
it to tv@netbsd...
2001-08-22 03:15:48 +00:00
itojun 3755b9fd35 mention TOOLDIR change (8/14). 2001-08-22 03:11:09 +00:00
nisimura b7f1b6d54b Nuke fb_devconfig data structure which was found unnecessary to have. 2001-08-22 02:24:29 +00:00
thorpej 17c22a634f Set PCI_NETBSD_ENABLE_IDE to 0x01, so that the first IDE channel
will be enabled.
2001-08-22 00:42:43 +00:00
thorpej f5e6f05c1a If PCI_NETBSD_ENABLE_IDE is set, enable the PIIX{3,4} southbridge
IDE channels on the P-5064 and P-6032, since PMON doesn't do it
for us (thus causing the `pciide' driver to ignore them).
2001-08-22 00:40:38 +00:00