47bb32d470
Use the common Makefile.powerpc.
2001-08-26 11:00:07 +00:00
7ec91f6656
Include ${THISPPC}/conf/Makefile.${TARGET_MACHINE}.inc if it exists (ala
...
mips' Makefile.mips).
2001-08-26 10:59:26 +00:00
a026d7bc78
handle unmanaged pages correctly in pmap_remove_pv(),
...
fixes crashes when exiting X.
2001-08-26 06:03:11 +00:00
500082fdef
Build lint on sparc64.
2001-08-26 06:00:30 +00:00
90ce2985e4
Do a more accurate compare.
2001-08-26 05:46:31 +00:00
5b0492f05e
Fix debug printf.
2001-08-26 05:44:46 +00:00
97ff24357e
Clean this up so it works again.
2001-08-26 05:31:28 +00:00
ba61a3cc19
Fix memsize_scan() - cut and pasted code can't use physmem because it hasn't
...
been set yet.
2001-08-26 05:16:52 +00:00
531338f3ce
Adjust vmstat -i / -e for wider event names
2001-08-26 02:50:37 +00:00
5911b9a67f
Make compile with -Wmissing-prototype -Wstrict-prototypes
2001-08-26 02:49:18 +00:00
449a758850
Add EVCNT_TRAP event counter type.
2001-08-26 02:48:12 +00:00
550ffff41b
Make all powerpc ports use a common Makefile.powerpc (except walnut)
...
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.
2001-08-26 02:47:33 +00:00
a65671c2a9
don't mess with vnode holds or buffer lists for swap i/os.
...
fixes problems with leaked vnode holds.
2001-08-26 00:43:53 +00:00
bef08d29d9
Also accept (and ignore) -export-dynamic (already accepted --export-dynamic).
2001-08-26 00:02:46 +00:00
d0e2aef09a
add register prefixes. no change in generated .o files.
2001-08-25 23:08:39 +00:00
78c9e69530
Fix typo mentioned in OpenBSD PR/2032
2001-08-25 23:05:43 +00:00
e2ad09e624
synchronize (addition of repulse driver).
2001-08-25 21:19:20 +00:00
bd5a12de41
Driver for the ALiENDESiGN Repulse board.
...
- only 8/16 bit precision supported
- no support for the Repulse special S/P-DIF I/O yet
- I think ac97.c needs some work.
2001-08-25 21:15:44 +00:00
753f885263
add register prefixes in asms.
2001-08-25 21:14:44 +00:00
db7d3946ac
add register prefixes. no change in generated .o file.
2001-08-25 21:08:02 +00:00
ed1e153702
use the correct symbol for multi-include protection.
2001-08-25 20:37:46 +00:00
3ec769dff6
Make this compile with -Wmissing-prototypes by adding appropriate
...
cdev_decl, bdev_decl, cons_decl
2001-08-25 19:05:04 +00:00
d38ac3477c
remove -mwarn-no-reg-prefixes, it doesn't work with new gas.
2001-08-25 18:57:37 +00:00
7cffe4c898
switch cesfic to ELF.
2001-08-25 18:39:24 +00:00
6fbd291760
add COMPAT_AOUT_M68K stuff.
2001-08-25 18:37:20 +00:00
89893e42b7
ANSI'ify.
2001-08-25 18:04:01 +00:00
3f9dc1b3e8
In ioc_attach(), use ioc_irq_setmask() and ioc_fiq_setmask() rather than
...
twiddling registers directly. Also, remove an outdated comment.
2001-08-25 17:59:38 +00:00
7da5d70599
Add fiq_on() and fiq_off(), to enable and disable FIQs at the CPU.
...
Call fiq_off() from start() and fiq_on() from cpu_configure(), so we're certain
not to get any FIQs during autoconfiguration.
2001-08-25 17:55:24 +00:00
bf5b029d44
Make sure that soft interrupts are initialised in a "not pending" state.
2001-08-25 17:45:32 +00:00
13237636e2
Remove description of an option that only applies to UNICOS < 7.0.
2001-08-25 16:50:18 +00:00
bbdda9d53d
Make the toolchain set lists reflect reality (we do NOT use the new
...
toolchain yet, and someone disabled shlibs in the toolchain w/o fixing
up the set lists...)
2001-08-25 16:46:17 +00:00
5bfc586274
Oops, add set names, add <ieeepf.h>
2001-08-25 16:43:57 +00:00
a27daf757e
Add MD sets for the algor port.
2001-08-25 16:32:44 +00:00
cf301e151e
Add MD sets for the algor port.
2001-08-25 16:21:24 +00:00
36c31ac875
Until the new toolchain is ready, /usr/libexec/cpp0 -> /usr/libexec/cpp,
...
so that people can actually build snapshots.
2001-08-25 15:51:36 +00:00
f38eb663ed
Building of shared libraries for the toolchain was disabled. Remote
...
them from the set lists for the benefit of those building snapshots
until the toolchain upgrade is finished.
2001-08-25 15:49:12 +00:00
e63635fdcd
update copyright notices.
2001-08-25 15:06:02 +00:00
71552c86a0
s/sparc/sparc64/ in a printf()
2001-08-25 15:05:22 +00:00
05403a4b92
turn off compat & some exec options
2001-08-25 15:04:26 +00:00
48fcc1a2c3
update a comment about R_UA_32 relocs.
2001-08-25 15:03:19 +00:00
ed5e27cc44
Increase the size of a jmp_buf when using ELF, since this will be our last
...
chance to do so for a while. We don't use the extra space yet, but VFP
support is likely to need it.
2001-08-25 14:45:59 +00:00
69879ba2e5
regenerate.
2001-08-25 12:23:49 +00:00
11be81ff63
Regen.
2001-08-25 06:00:01 +00:00
6b1f7b723b
Note that the Am79c874 is compatible with the AC101.
2001-08-25 05:59:39 +00:00
c783391d0a
Note compatibility with the Am79c874, and document some more
...
registers.
2001-08-25 05:57:12 +00:00
9d50e2e95a
Back out previous; closer inspection of the manual reveals that the
...
Am79c874 has the same ID register contents as the AC101.
2001-08-25 05:55:19 +00:00
820809faec
Regen; added AMD Am79c874 NetPHY-1LP.
2001-08-25 05:45:25 +00:00
05e4fb8e6c
Add AMD Am79c874 NetPHY-1LP.
2001-08-25 05:44:59 +00:00
c55c271cdb
Add amhphy(4).
2001-08-25 04:14:26 +00:00
4d0a4a139e
Typo in a revious reg.
2001-08-25 04:11:48 +00:00
simonb