b9b6bd3397
Add ${DEBUG} to CFLAGS and -f to dbsym.
1993-07-19 16:52:16 +00:00
886f6afa56
Reading file marks or writing end of tape return 0 bytes, AND THEY
...
DON'T SET THE ERROR BIT ON THE BUFFER UNLESS THE AUTHOR OF PHYSIO
IS STUPID!
1993-07-19 16:44:38 +00:00
9bd082f70e
replace jolitz's vfs__bio with a better one from CMU via mw.
...
so, replace vfs__bio, and deal with attendant changes.
1993-07-19 16:38:35 +00:00
570ad76179
Change open and close routines for swapdev back to enodev. What a kluge.
1993-07-19 10:57:30 +00:00
fd13ccf3cc
Fix open and close entries for swap in bdevsw.
1993-07-19 10:35:12 +00:00
e916333aea
disable all AUTO_EOI's, at bde's suggestion--
...
they don't gain much, and on old chips it doesn't work properly
1993-07-19 08:27:06 +00:00
e6c1d2670f
Phooey. Need a better mechanism for dealing with multiple sets of local
...
changes.
1993-07-18 21:26:34 +00:00
1318be7191
CC should be cc. cc is gcc2...
1993-07-18 16:44:16 +00:00
d2e484320a
Add DUMMY_NOPS.
1993-07-18 15:11:31 +00:00
a700cbd173
my bucket of mud has changed a bit..
1993-07-18 13:29:27 +00:00
8fa2ba491b
rework the way effectual NOPs are enabled/disabled to make they delay
...
things in the default case.
1993-07-18 13:08:41 +00:00
2565e5e15a
Change to work with new config stuff for specifying load address.
1993-07-18 10:08:22 +00:00
7b721ac9fa
set mountroot to ufs_mountroot. swapgeneric is currently broken for other
...
reasons (the interface to SCSI disks isn't a clean match, and i'm
not entirely sure what a good way to do it is...)
1993-07-18 09:51:26 +00:00
46570ee334
Oops. Back out a change that shouldn't be committed...
1993-07-18 09:48:49 +00:00
28df966f59
Use new -T option to dbsym.
1993-07-18 09:47:40 +00:00
003ff4e190
Add a `XXX'...
1993-07-18 08:43:19 +00:00
297f54dd01
* copyin/out(), copyin/outstr(), s/fubyte() et al protection fixes,
...
including COW support, using code based on that from Wolfgang Solfrank and
Christoph Robitschko.
* user segment descriptors fixed to disallow access to user area.
* bde's boot >= 1MB fixes.
1993-07-18 08:22:59 +00:00
c558337807
Add some kitchen sinks.
1993-07-17 16:54:16 +00:00
f18d296b3c
Stylistic change to attach message to match others.
1993-07-17 16:41:27 +00:00
331148c31a
Make these files GCC 2 happy.
1993-07-17 16:20:24 +00:00
ad087b06a0
Finish moving struct definitions outside of function declarations.
1993-07-17 15:56:59 +00:00
3aed8ce5e5
Fixed two occarances of ldos which should have been lods.
...
(From Christoph Robitschko)
1993-07-17 12:28:47 +00:00
97c38bc76a
gcc-2.4.5's ffs() has been rendered safe for kernel compiling...
1993-07-17 12:22:00 +00:00
2ee2073a53
scsi_switch had wrong entries for these controllers...
1993-07-17 11:00:09 +00:00
45efbe01cd
#include cpufunc,h so inb() and outb() are inlined.
1993-07-16 15:44:22 +00:00
534b762f34
patch from <ache@astral.msk.su> to fix problems:
...
nestart() logic totally rewriten, neput() code moved out of loop.
Fixed error in rxend buffer size: assing 32768 to short.
nerecv() fixed for correct buffer sizes for NE1000.
Detected card type displayed at autoconf time.
1993-07-15 12:57:05 +00:00
ba408056a6
Use splnet, not splimp.
1993-07-13 21:53:06 +00:00
e086df5a24
Fix addressing bug in bdb junk.
1993-07-13 21:51:36 +00:00
499f536ddc
up default data size limit to 16M, like on freefall, so everything will
...
compile properly with gcc2.
1993-07-13 10:16:40 +00:00
bcfa1d8dd3
Fix handling of bad syscall numbers.
1993-07-12 13:53:36 +00:00
6cc173695a
moved bfdttach point to same place as other drivers, from greenman
1993-07-12 13:13:41 +00:00
e28cd102b5
Add some more swap.
1993-07-12 12:07:46 +00:00
395bc5f7a2
physmem is in clusters, not in bytes... that wasn't
...
taken into account in the buffer size calculations
1993-07-12 12:00:45 +00:00
8401efb773
add -fno-builtin to CFLAGS until gcc bug fixed
1993-07-12 11:58:27 +00:00
3be4221095
Change tty code to use clist interface, but with ring buffer implementation.
...
Also, fix a couple of bugs in tty.c and pccons.c, and some gross kluginess
in the hp300 stuff.
1993-07-12 11:36:53 +00:00
c3f293f92b
Make splimp = splnet | spltty, and get rid of SLIP kluge for splnet and
...
spltty.
1993-07-11 14:12:40 +00:00
0daaa4f16c
Make splimp = splnet | spltty, and get rid of SLIP kluge for splnet and
...
spltty.
1993-07-11 14:03:51 +00:00
14f33d91ea
Made boot up messages cleaner
1993-07-11 12:12:35 +00:00
84d1e74079
Fixes from bde, including support for loading @ any MB boundary (e.g. a
...
kernel linked for 0xfe100000 will load at the 1MB mark) and read-ahead
buffering to speed booting from floppies. Also works with aha174x
controllers in enhanced mode.
1993-07-11 12:02:17 +00:00
6d1a5a2ad5
New isolan driver. Multiple card and bpf support added.
1993-07-11 11:18:23 +00:00
4909db9a7e
do quoting right, and give boat-anchor enough symbol space
1993-07-11 10:29:55 +00:00
62ddceb6fc
Yah, yah...
1993-07-11 09:53:44 +00:00
7d3cf97d73
Oops. Back out clist changes, but leave the bug fix.
1993-07-11 09:45:07 +00:00
4d187f65ae
DDB makes these kernels too large. damn.
1993-07-11 09:03:13 +00:00
cc86d5be93
don't ignore errors from dbsym... it might say that, e.g. there's
...
not enough symbol space!
1993-07-11 08:42:22 +00:00
dd71ecc3aa
This is so utterly revolting I refuse to describe it, except to say that it
...
fixes the problem of console output hogging the CPU.
1993-07-11 07:54:47 +00:00
1695b91b15
need more space for symbols than DDB normally gives you...
1993-07-11 07:28:09 +00:00
3e2b1078a3
kill an extraneous # which was annoying cpp
1993-07-11 06:09:48 +00:00
083cf2243a
Fix some probs with stack tb's. Deal with syscalls.
1993-07-10 03:26:44 +00:00
6d65f0bf71
Cleanup warnings and add netbsd kernel name suffix.
1993-07-09 15:24:10 +00:00
4cbf5e04e2
update for better FP routines, from AT&T & elsewhere
1993-07-09 09:39:13 +00:00
24ee0231e8
Diskless boot prom code from Jim McKim (mckim@lerc.nasa.gov)
1993-07-08 16:03:44 +00:00
770db91c65
add "diediedie", a function to make the system panic & dump core
...
in a nice, predictable fashion. useful for DDB, when you want
a core... (i.e. "call diediedie")
1993-07-08 09:55:54 +00:00
80dc38edb3
documentation error
1993-07-08 08:22:17 +00:00
e4c42383fb
Implement scroll lock using sleep() and wakeup() so we don't get stuck at
...
spltty and freeze everyone.
1993-07-08 07:27:29 +00:00
f485ebbacc
get rid if wfj's stack limit check-disabling bogosities. (his old
...
exec needed them. stoopid...)
1993-07-08 04:01:13 +00:00
7afa674eb4
the "struct tty *cn_tty" field in cons.c wasn't being used by anything
1993-07-07 11:12:26 +00:00
1eacd36710
pccons.c now dynamically allocates it's "struct tty"
...
cons.c's "struct tty *cn_tty" wasn't used by any of the kernel, and goes away.
1993-07-07 11:00:23 +00:00
837c11c730
deal with make/shell strangenesses, and fix newvers problem
1993-07-07 07:49:09 +00:00
608b09065c
function definition changes...
1993-07-07 07:20:03 +00:00
2aeaba37fd
cpu_exit() returns void
1993-07-07 07:09:32 +00:00
f8827cb076
get rid of extraneous inclusion of seg.h
1993-07-07 07:08:47 +00:00
bd0c8f83d5
changes for ring buffers vs. clists.
1993-07-07 07:07:20 +00:00
bab148ba4e
delete inclusion of rlist.h again. grr.
1993-07-07 06:52:39 +00:00
3e210908e7
sd and st are "device-driver" under new scheme
1993-07-07 06:36:30 +00:00
640761aa1c
everybody needs a vnode pager...
1993-07-07 06:35:37 +00:00
db63cd6b23
get rid of extra strcmp definition
1993-07-07 06:26:59 +00:00
aa2992a474
make the rlist code all go away. replace it with resource map code,
...
as written by Wolfgang Solfrank.
1993-07-07 06:02:26 +00:00
9bff90a5c1
added a timeout debugging mode to wd.c so that people can see how slow
...
their controllers really are. Look for the WDCNDELAY_DEBUG definition.
1993-07-07 05:50:35 +00:00
d670635e8b
ok, 5 second command timeouts..
1993-07-07 01:05:42 +00:00
ceec40c98f
clean up code for timeout/untimeout/wakeup prototypes.
1993-07-06 06:06:26 +00:00
21e01d6cd2
change the way dump info is printed back to the original (net/2) way,
...
rather than the jolitz way...
1993-07-06 00:48:06 +00:00
86999439b2
number of changes:
...
1. controller reset code moved into one function, called from more places now.
2. more places now do timeouts. TIPCAT code turned on.
3. blew away the unused WDOPENLOCK test code.
4. delay is now done using WDCNDELAY repetitions of DELAY(25). Up to 2.5 second
pause accepted from controller (some controllers have some commands that are
actually this slow)
5. some of the old timeout code was really whacked.
1993-07-06 00:42:43 +00:00
2d53469109
get rid of extraneous inclusion of rlist.h
1993-07-06 00:31:52 +00:00
982d1c9fff
get rid of specific compile dir, but make sure top level dir is kept...
1993-07-05 22:55:57 +00:00
33e84123f7
sys/arch/amiga tree. This is the machdep part required to get the kernel
...
up on an A3000. There are still (very) few changes required outside the
arch/amiga tree, so you can't recompile the kernel yet. Support for
third party SCSI controllers for the A2000 is on its way. The kernel is
fully functional (except for a missing ethernet-driver ...). This
tree is based on my version #390 .
1993-07-05 19:19:43 +00:00
d8da9afb3a
Initial revision
1993-07-05 19:19:42 +00:00
adfe768529
sys/arch/amiga tree. This is the machdep part required to get the kernel
...
up on an A3000. There are still (very) few changes required outside the
arch/amiga tree, so you can't recompile the kernel yet. Support for
third party SCSI controllers for the A2000 is on its way. The kernel is
fully functional (except for a missing ethernet-driver ...). This
tree is based on my version #390 .
1993-07-05 19:19:41 +00:00
2cb34d6d65
added a missing {/} pair that barsoom seems to have taken out, but
...
which the standard 386bsd 0.1 driver did have. This is for a piece of
code in the bad block handling. found/fixed by hpeyerl.
1993-07-05 04:44:48 +00:00
3322c7b691
all timeout code now calls DELAY() so the timeout delays are the same
...
length on all processors. Where possible, the controller is reset if it
times out.
1993-07-05 03:20:57 +00:00
b274bb4126
add support for checking entry against max user address
1993-07-05 01:53:56 +00:00
748e864b38
No need for the DELAY() macro. in userland. It just polutes the namespace.
1993-07-05 01:12:46 +00:00
ed61b76822
increased the timeout inside wdcommand(). Some controllers impliment some
...
commands very slowly.
1993-07-05 00:08:27 +00:00
c286f8c4fd
move julian's scsi files back into files.i386
1993-07-04 20:08:15 +00:00
abf0a9b802
do the right thing, so things aren't built in /usr/src/sys
1993-07-04 14:02:53 +00:00
d6325033cd
make i386 setregs do the "normal thing". should probably do something
...
better with retval... (currenty does nothing)
1993-07-04 10:48:39 +00:00
12b46ebf29
Got rid of the SHOW_STI I had added to the BPTTRAP() macro - it breaks
...
(in the type 9 trap and into ddb sense) the kernel's breakpoint handling.
1993-07-04 05:49:17 +00:00
119ad60ccf
add MID_MACHINE #defined to be MID_HP300
1993-07-04 02:27:30 +00:00
3117628f3c
strcmp's args are supposed to be "const"...
1993-07-04 02:27:14 +00:00
f98105c8ce
use ringb rather than clist
1993-07-04 02:26:54 +00:00
e50f336a76
kernel profiling says that i should make "over_net_stuff_for_spl0" a local
...
label! (i.e. i missed this one before...)
1993-07-03 13:13:34 +00:00
77219acd07
change interrupt vector names to begin with "X" rather than "V", so we're
...
like every other BSD system on the planet...
1993-07-03 12:32:25 +00:00
7e940b55e0
add support for David Greenman "ed" driver
1993-07-03 12:21:07 +00:00
d77e126ab2
add support for David Greenman's "ed" driver.
1993-07-03 12:19:36 +00:00
b8a46f69af
Unless INTR_DEBUG is set, don't report all of the "random" event types.
...
also, unless INTR_DEBUG is set, make the internal branch labels for
the interrupt code be local labels, so profiling works OK.
1993-07-03 09:43:11 +00:00
532d59062c
add DDB... why? because we'd like to actually use it to DEBUG things!
1993-07-02 10:09:17 +00:00
9024d0885a
Fixed a nested comment compiler warning.
1993-07-02 08:15:32 +00:00
2eb048f805
Add another tape drive.
1993-07-02 03:23:17 +00:00
941652ff62
This has got to be a bug.
1993-07-01 18:04:16 +00:00
172788b885
Fixed a typo.
1993-07-01 07:22:41 +00:00
3c4b913d33
Fix a bunch of things.
1993-07-01 00:24:09 +00:00
ec3a442b59
Fix Andrew's real bug, and put back the FAST_VECTOR changes.
1993-07-01 00:20:19 +00:00
f7dd4be020
Updated comments.
1993-06-30 04:13:34 +00:00
5138fc637d
Noted that IO_TIMER2 was an EISA-specific feature.
1993-06-30 04:06:41 +00:00
62442b4e98
Added com_scratch entry.
1993-06-30 04:04:24 +00:00
8d9d634680
Backed out the changes to the FAST_VECTOR code that were made in the
...
previous revision, as they apparently broke something.
1993-06-30 02:34:57 +00:00
9a9273e999
uninitialized variable reported by <jfw@ksr.com>
1993-06-29 19:12:44 +00:00
1b22d94879
various updates: but hasn't been compiled
1993-06-29 17:36:31 +00:00
e2d2f40725
additional needed functionality
1993-06-29 17:36:03 +00:00
11a0ff5f16
added /dev/idprom driver :), doesn't compile yet
1993-06-29 17:35:37 +00:00
455487b127
this mallocing 'struct tty' stuff is bogus as the vm system isn't
...
up and running yet when consoles are first used. squish.
1993-06-27 12:08:50 +00:00
bc5f186001
ANSIfications.
1993-06-27 06:42:19 +00:00
51ac6a0997
ANSIfications.
1993-06-27 06:27:29 +00:00
0e6cb953ea
ANSIfications - removed all implicit function return types and argument
...
definitions. Ensured that all files include "systm.h" to gain access to
general prototypes. Casts where necessary.
1993-06-27 06:01:27 +00:00
6273afbfb5
Fixed typo.
1993-06-27 05:54:40 +00:00
16947975c7
Replace SHOW_A_LOT_NOT with a more meaningful commented-out SHOW_A_LOT.
1993-06-27 05:43:37 +00:00
f024b50a47
Enable AUTO_EOI_1 by default; leave AUT_EOI_2 alone, even if it does seem
...
to work very well, to avoid any potential troubal.
1993-06-27 05:42:45 +00:00
0bffd21fdb
Replaced 386BSD conditionals with a NetBSD ones. Fixed a bug in 386BSD
...
support. Cast arguments to tsleep() and wakeup() to avoid compiler
warnings.
1993-06-27 05:39:44 +00:00
d75ed5fc23
Added bus mice.
1993-06-27 05:33:18 +00:00
cf73b57b22
Changed the I486_CPU conditionals to be !I386_CPU, to handle the case
...
where both I386_CPU and I486_CPU are configured in the same kernel.
1993-06-27 05:24:24 +00:00
4b741818d8
Neatened up the AUTO_EOI conditionals. FAST_VECTOR() now saves & restores
...
the ES register, just to be on the safe side (since ES is used in some
locore routines).
1993-06-27 05:15:06 +00:00
d9022f90d2
Don't try to include "sio.h" just yet.
1993-06-27 04:59:47 +00:00
a9f16886f9
Re-entrancy protection.
1993-06-27 04:50:12 +00:00
e495c42118
Added a call to SHOW_STI in BPTTRAP macro. Avoid lots of nops and use
...
bswap if we're a i486.
1993-06-27 04:27:58 +00:00
13834263a8
Clobbered '/*' within comment, to keep gcc -Wall happy.
1993-06-27 01:24:55 +00:00
b7d7bfa239
fixed bug in mon.h; fixed NEED_* in cpu.h; spl macro problems
1993-06-27 00:52:18 +00:00
b2561649ca
theoretically (uncompiled), both a prom tty driver and prom as console
...
support
1993-06-27 00:51:23 +00:00
90a6135104
use gas; add support for more stuff
1993-06-27 00:50:39 +00:00
e1fec74952
clock.c: now compiles even if address is bogus :)
...
conf.c: compiled, until prom addition :)
cons.c: add entry for prom driver
lib.s: remove some includes; we're being included by locore.s
locore.s: include asm.h, syscall.h, add icode
m68k.s: now included by locore.s
added signal.s; contains signal support
sun3_startup.c: fixed compile bug in vector table initialization; fixed mon
usage
swapgeneric.c: doesn't refer to drivers we don't have
1993-06-27 00:46:09 +00:00
4c06bc4b0d
removed dumb define for enablertclock()
1993-06-26 01:29:40 +00:00
124d060763
added resettodr()
1993-06-26 01:17:52 +00:00
fba81270ab
new intersil clock support; this time written from datasheet
...
still need to write resettodr()
1993-06-25 23:07:14 +00:00
24e43b8ea3
initial commit
1993-06-25 10:31:21 +00:00
c6b347c351
adding include files...not much of this works
1993-06-25 10:28:37 +00:00
68f2474ad2
initial commit. little of this actually works
1993-06-25 10:26:08 +00:00
086f942e40
keep the directory from being deleted
1993-06-25 10:25:13 +00:00
100f7b0bc5
Oops. Reversed order of args to outb(). Still haven't gotten my 486 booted
...
with a new kernel to actually test this, though.
1993-06-23 05:48:57 +00:00
05f50ca11e
I don't know what I did that was so critical, but now the floppy driver
...
works on my machine (it did not before). Big voodoo.
1993-06-21 09:39:52 +00:00
80ab28ea30
if the floppy does not exist, say nothing.
1993-06-20 08:42:05 +00:00
277c73694e
print "maddr 0xd0000 msize 65536" as "maddr 0xd0000-0xdffff" instead.
1993-06-20 07:24:53 +00:00
d1ed63195d
fix the divide-by-zero problem w/old disks. this patch is ws's "fault."
1993-06-18 20:45:35 +00:00
55c2266339
install floppy boot block, too.
1993-06-18 08:03:14 +00:00
c8bdad0560
convert magic numbers to network byte order, and attendent changes
1993-06-18 06:49:30 +00:00
9f1a8dc335
new floppy driver, merged from patchkit patch #153
1993-06-18 06:19:16 +00:00
6046a36e2d
make it *do* something when loading the kernel, a la sun twiddling-thing
1993-06-18 02:28:58 +00:00
62571113bd
Use NNPX instead of NPX from npx.h for activating npx.
1993-06-18 02:03:34 +00:00
420720c2f3
Clean up deleted files.
1993-06-17 04:24:06 +00:00
df4fb4cae4
Make ioctl definitions ANSI-compliant.
1993-06-17 04:07:41 +00:00
2a6a498c49
Move my assembly versions of strlen and ffs into the kernel
1993-06-16 22:22:39 +00:00
409bc91101
Move asm.h from /usr/include/sys to /usr/include/machine.
1993-06-16 21:42:43 +00:00
06dc5c8e13
Use defines in timerreg.h and add spkr_reg.h for specific declarations.
1993-06-16 19:41:54 +00:00
8959c6e228
Clean up deleted files.
1993-06-16 18:12:30 +00:00
c9a48f2b77
Move spkr.h to include/machine so users can use it.
1993-06-16 18:12:23 +00:00
5a2b8d1abb
Fix typo.
1993-06-16 02:59:42 +00:00
94df11ad63
Make sysbeep() take a frequency, not a timer count, and add constants
...
BEEP_FREQ and BEEP_TIME which can be overridden in the config file.
1993-06-16 02:57:17 +00:00
db4a41293e
Nuke MID_I486 case.
1993-06-15 21:56:58 +00:00
528edf6037
Move definitions of TIMER_FREQ to timerreg.h, and fix value of CF for DELAY().
1993-06-15 21:37:14 +00:00
2a2bde915f
Need to check soft interrupts as well as ICU for overflow.
1993-06-15 20:54:06 +00:00
930a773dce
Clean up beep code a miniscule amount, add interrupt protection, and
...
make multiple beeps generate a continuous tone.
1993-06-15 20:34:54 +00:00
5592ad3fbb
Ignore interrupts if the device isn't open. This prevents stray interrupts
...
from hosing the works. What a stupid architecture.
1993-06-15 01:50:32 +00:00
fae2a0b6f8
the previous change (to make NOPs do idle stuff) was irrelevant,
...
apparently; lamp is now stable with NOPs that do nothing.
1993-06-15 01:27:14 +00:00
938b01e0ae
Sigh. Save a few cycles occasionally.
1993-06-14 19:44:37 +00:00
cf1dbb9fb8
Oops. Wrong name for ISO interrupt routine.
1993-06-14 19:35:59 +00:00
e534ec58ec
Add support for other networks than INET.
1993-06-14 19:29:30 +00:00
42fb89da69
Explicitly disable mouse during attach.
1993-06-14 17:33:18 +00:00
6bca967a4e
These mice use 4 ports.
1993-06-14 17:04:22 +00:00
08f233618d
Rework neread(), and add BPF hooks for receiving. (Still need BPF hook
...
for transmitting.)
1993-06-14 16:49:09 +00:00
625cd25efd
8390-based boards use 16 ports, not 8.
1993-06-14 16:45:25 +00:00
fa1551c8a6
Work around a bug in XFree86.
1993-06-14 16:38:25 +00:00
ddf64edfe6
Somebody didn't ftruncate()...
1993-06-14 15:57:07 +00:00
60dfc2196f
Fix egregious stupidity.
1993-06-14 15:35:14 +00:00
6d58d97764
Update my config files.
1993-06-14 15:29:55 +00:00
25b19a1b61
Add entry for pms.
1993-06-14 15:16:23 +00:00
87bcb8ca95
Yeah, I'm awake.
1993-06-14 15:13:14 +00:00
06f36e1045
Add preliminary (read: untested) PS/2 mouse driver.
1993-06-14 15:05:50 +00:00
ba09c15c63
Return EBUSY if device already open.
1993-06-14 12:46:56 +00:00
330f5907f2
say "using exception 16" rather than "exception 16"; the latter
...
lookes like it could be an error message...
1993-06-14 07:06:49 +00:00
925a429d35
Reduced bus-on time from the default of 11ms -> 9ms, to prevent floppy from
...
becoming data-starved during simultaneous fd & scsi activity.
1993-06-14 04:16:03 +00:00
fe853a780c
Changed the name of bms -> mms.
1993-06-14 02:28:34 +00:00
f9ce81fc82
Name change from bms -> mms.
1993-06-14 02:26:17 +00:00
07ec5d2fc6
Renamed Microsoft busmouse driver from bms -> mms
1993-06-14 02:12:15 +00:00
e242190751
*whoops*. The previous commit killed a few important characters of code.
1993-06-14 00:47:08 +00:00
64f27b118b
incorrect previous change, the LKM_CDEV/LKM_BDEV macros generate the
...
correct cdevs[]/bdevs[] structures for insertion.
1993-06-13 18:32:48 +00:00
566c83b7c1
Added microsoft and logitech busmice entries.
...
Filled in reserved "lkm" entries with enxio()s.
1993-06-13 14:10:44 +00:00
e1e618d7ca
Added microsoft and logitech isa busmice.
1993-06-13 14:03:50 +00:00
fc37a8acde
Microsoft/Logitech busmouse ioctls.
1993-06-13 14:01:06 +00:00
bd8e20a9b4
Logitech busmouse driver.
1993-06-13 13:59:52 +00:00
160d6e8b5c
Microsoft & Logitech busmouse drivers.
1993-06-13 13:55:03 +00:00
86c3eb7c8b
Added IO_BMS1, IO_BMS2 bus mouse entries.
1993-06-13 12:55:47 +00:00
3fcc79608f
make no-ops actually take time; seems to make bde's interrupt code more
...
stable...
1993-06-13 05:57:34 +00:00
c5d0eb5199
note gprof.ex is in csu/i386 not csu.i386 like it used to be...
1993-06-11 02:59:54 +00:00
f37ee25bb2
sigh. one day i'll finish this driver, meanwhile, one more fix..
1993-06-10 04:50:42 +00:00
f6779cbdce
minor silliness related to two or more controllers
1993-06-09 22:36:40 +00:00
c425e255c1
Update my config files.
1993-06-09 00:11:46 +00:00
e3295c1d74
makes more sense if src is mounted readonly
1993-06-08 03:36:39 +00:00
57d3a6d525
add support for terry lambert's loadable kernel modules.
...
needs a bit of cleanup, but overall: SLICK!
1993-06-07 19:51:59 +00:00
f73effe636
Clean up deleted files.
1993-06-07 00:20:39 +00:00
0d126d8b38
make conf.o actually depend on conf.c...
1993-06-06 23:29:03 +00:00
f1b8c74730
make getc() and ungetc() be rb{un,}getc(), so getc() and ungetc()
...
don't conflict w/ansi prototypes...
1993-06-06 23:04:42 +00:00
433d3ac089
Clean up deleted files.
1993-06-06 22:20:23 +00:00
450bfb0c82
cleanup, add DDB to dist. floppy kernels, and get rid of f*@#ing "as"
1993-06-06 22:20:03 +00:00
276a05a454
apply patch 167, to fix some interrupt system bogosities
1993-06-06 05:06:50 +00:00
c6ab6df500
Clean up deleted files.
1993-06-06 04:18:56 +00:00
515bda903f
add DDB to "SUN_LAMP", and get rid of "SUN_LAMP_DDB" because they
...
were confusing me, and it's my machine...
1993-06-06 04:18:54 +00:00
8a05b36058
incorporate Bruce Evans' interrupt changes, as hacked by Rod grimes,
...
for patchkit patch 158. it appears to work well.
1993-06-06 04:14:01 +00:00
e52125aa5d
change MCLSHIFT to 11, so mbuf cluster size is bigger than MTU
...
of network interfaces, for performance. to use old size,
use "options MCLSHIFT=10" in your kernel config.
1993-06-05 23:11:10 +00:00
9d6a908bb7
patch from rgrimes to add delay to let data port stabilize, also
...
make "lpflag" unique to each driver
1993-06-05 22:58:29 +00:00
e13c2fa2e7
make sure kernel is small enough; this is a really weird fix from
...
rod, pk patch #159 . the comment is:
The +28672 is for memory allocated by locore.s that must fit in the bss!
this seems way wrong to me, but i'm not going to fix it in locore right
now...
1993-06-05 22:52:11 +00:00
20ed989018
fix stupid missing ||
1993-06-04 01:12:04 +00:00
948e273f20
oops, forgot to delete one variable reference
1993-06-03 18:06:43 +00:00
061ba43003
print out old-style disk-syncing info, complete with "meaningless" numbers
1993-06-03 18:01:08 +00:00
f813a8b341
add prototype for a function to be called from execve to check a_mid type
1993-06-03 01:31:15 +00:00
94f52462a4
add support for a function to be called from execve to check a_mid type
1993-06-03 01:31:05 +00:00
9c46a9333d
add 'options "COMPAT_NOMID"' for compatibility w/i386 binaries w/no
...
a_mid in their exec structure (and therefore, in the NWO, having
an a_mid of MID_ZERO)
1993-06-03 01:30:19 +00:00
53f34e4d5b
add support for a macro to be called from execve to check a_mid type
1993-06-03 01:28:36 +00:00
ae97de78bc
get rid of unnecessary PCB_SIGC definition
1993-06-02 19:25:00 +00:00
f9518c61da
get rid of last bit of signal-trampoline-in-pcb hackery
1993-06-02 04:28:37 +00:00
3e25387fbb
final cleanups for putting signal trampoline on stack
1993-06-02 04:28:07 +00:00
6738d12182
set things up so that the signal trampoline code is on the stack,
...
like it normally is in BSD systems. still has a bit of hair...
1993-06-02 04:11:48 +00:00
eff5542792
machine-dependent exec stuff
1993-06-02 02:46:58 +00:00
e9009189f5
fix bogus initializer
1993-05-31 00:54:40 +00:00
2b422f4029
have setregs copy the stack pointer, too
1993-05-30 18:52:39 +00:00
5e4f134585
fix for t_raw, rather than t_rawq for the tsleeps...
1993-05-29 19:41:40 +00:00
e27fa2003d
fix for dynamic tty allocation; was being used in a #define...
1993-05-29 19:41:03 +00:00
d37811a76c
update for "arch"
1993-05-29 19:25:17 +00:00
e8d8fcff7a
make it work with new config. still needs some cleanup
1993-05-29 19:21:06 +00:00
1628a9913a
change kernel names where necessary, also, other minor hacks
1993-05-29 19:15:31 +00:00
2adecf84f6
1. It is now possible to build a kernel that does not have a pc0 device driver.
...
2. "press any key to reboot" reads the key from the console.
3. wddump() still needs a non-blocking getc() routine (or flush)
1993-05-28 09:10:52 +00:00
0b12df586d
1. It is now possible to build a kernel that does not have a pc0 device driver.
...
2. "press any key to reboot" reads the key from the console.
3. wddump() still needs a non-blocking getc() routine (or flush)
1993-05-28 09:10:29 +00:00
99c3a88ce4
kill the last copy{in,out} (and related functions) changes, because they
...
were broken...
1993-05-27 16:44:13 +00:00
a17c1c267a
-DKERNEL in same place as i386
1993-05-27 11:37:20 +00:00
4659879b5f
compile directory has moved, relative paths change
...
-DKERNEL in Makefile, not in genassym.c, same as i386
1993-05-27 11:36:25 +00:00
2032b7529e
Changes to hp300 code to support two things:
...
1. dynamic tty allocation
2. use ring buffers instead of clists
Of course, I can't test it :-)
1993-05-27 09:35:10 +00:00
02dc05dd99
Cleaned up a little.
1993-05-27 02:12:28 +00:00
8d60a2631f
Compiles with gcc-2.3.3 now.
1993-05-26 18:58:11 +00:00
99519099bf
Compiles with gcc-2.3.3 now.
1993-05-26 18:43:33 +00:00
60fe9c133d
add "options FIFO"
1993-05-26 12:48:35 +00:00
9c27493b37
kernel for sun-lamp, with debugging included. possible now, due
...
to the new tty allocation setup.
1993-05-26 11:22:45 +00:00
806b927d8b
more ptys guys! now they are cheap as borst
1993-05-26 10:15:05 +00:00
2f0c0eb674
tty dynamic allocation
1993-05-26 10:06:41 +00:00
44dcf397e8
move sipcreg into i386/include/reg.h where it belongs, right next to ipcreg.
1993-05-24 11:37:12 +00:00
864a094e19
do the right thing for vers.o. i.e. don't make newvers if nothing
...
has changed.
1993-05-24 11:04:45 +00:00
fe1802950b
add include of select.h if necessary for protos, or delete if extraneous
1993-05-22 11:40:42 +00:00
ccbce9314e
my config file
1993-05-22 11:29:08 +00:00
30177b538f
add rcsids to everything and clean up headers
1993-05-22 07:56:12 +00:00
dde4fa6fe1
fixed typo
1993-05-22 07:40:46 +00:00
529ff2d4b7
Add reception of multicasts for if_we when using ISO, and add soft
...
interrupt handler for ISO.
(from Havard Eidnes <Havard.Eidnes@runit.sintef.no>)
1993-05-21 12:49:58 +00:00
253169d468
add "cpu classes" in addition to cpu names, put cpu names in table, along
...
with mapping to classes. this is for upgraded cpu-id code coming "soon"
1993-05-21 12:23:31 +00:00
0af6cb5bab
Cleaned up some #defines and my earlier mods.
...
Fixed incoming packet counter, as noted by mike@sarah.lerc.nasa.gov
1993-05-21 12:18:10 +00:00
2c553d7f06
make tabbing sane
1993-05-21 12:03:00 +00:00
5c9b7462d0
change theo's config to support i486, too
1993-05-21 11:39:18 +00:00
12fb16dc4b
move cpu types out of assym.s and into cputypes.h
...
and have that file included by cpu.h and by locore.s
1993-05-21 11:06:07 +00:00
e34f239662
First cut at cpu independent disklabels.
...
There will be niggly little details no doubt..
1993-05-20 22:48:23 +00:00
cdcb81b16e
hack on the uname "machine name" stuff for hopefully the last time.
...
now it uses MACHINE, as defined in param.h
1993-05-20 15:36:20 +00:00
bcbeb2f225
require MATH_EMUALATE to be defined if you want to use the emulator
1993-05-20 14:35:11 +00:00
62b2b3e2f9
clean up for new cpu stuff
1993-05-20 14:34:43 +00:00
42ff6b7e23
do the correct thing for the "cpu" config definition, and require
...
options "MATH_EMULATE" for math emulation
1993-05-20 14:33:41 +00:00
c13e0190b7
Clean up deleted files.
1993-05-20 14:32:45 +00:00
95895b842e
update config files for correct "cpu" usage
1993-05-20 14:32:17 +00:00
cda0b34784
we driver prints same ethernet address message as other drivers
1993-05-20 10:40:47 +00:00
ab1245d61e
"slave" -> "targ"
...
consistant at least..
1993-05-20 10:36:45 +00:00
48b772c092
get rid of the word Pentium. i hate laywers.
1993-05-20 02:14:49 +00:00
99a13fab8d
make uname stuff in init_main machine independent
1993-05-20 02:05:39 +00:00
36af9fcaac
file header cleanup
1993-05-20 01:42:26 +00:00
8d6c77881c
make kernel select interface be one-stop shopping & clean it all up.
1993-05-18 18:18:40 +00:00
e0848d7957
fix "swap generic" support.
1993-05-18 12:42:44 +00:00
da7c0055b8
add isa_subdev to the list of device tables...
1993-05-18 11:22:34 +00:00
477a97590b
pseudo-update for new config changes
1993-05-18 10:36:06 +00:00
8001a99dec
changes for 'arch'
1993-05-18 08:54:21 +00:00
9d509b2599
Latest patch to copyout family of functions from <chmr@edvz.tu-graz.ac.at>
...
> >If you want to use my code, be warned that there is a bug in the code that
> >calculates the number of pages involved in the copy: the page count is
> >too high if the copy begins on a page boundary and len is a multiple of
> >NBPG. Guido van Rooij pointed this out to me.
1993-05-18 07:49:52 +00:00
91d1bfbee0
fix pg() for halt again, because theo killed my change...
1993-05-17 22:31:21 +00:00
9578aaea22
nothing important
1993-05-17 20:41:55 +00:00
259cf0dbca
make sure hp300/compile stays in the distribution
1993-05-17 09:20:49 +00:00
50fa568f9d
make config use a /sys/${machine}/compile directory, rather than
...
/sys/compile
1993-05-17 09:10:06 +00:00
f4ec73b8d7
add serial ports and lpt
1993-05-17 06:17:41 +00:00
efdf5d1eef
add kernel config for other 486-50, and make theo happy
1993-05-17 05:25:01 +00:00
259e2828b6
Changed named of ECNTRL_THIN to ECNTRL_ONBOARD as the name isn't as
...
applicable to the UTP version of the card.
1993-05-16 15:20:38 +00:00
db841ac0c4
Changed named of ECNTRL_THIN to ECNTRL_ONBOARD as the name isn't as
...
applicable to the UTP version of the card.
Fixed selection of the internal/external transceiver to use the driver flags.
1993-05-16 15:18:34 +00:00
3d1ec1bf97
patch from Guido van Rooij <guido@gvr.win.tue.nl> to make ioports
...
work "normally," i.e. not randomly, and only when /dev/mem is opened.
1993-05-16 03:42:46 +00:00
c2599a527d
copyin/copyout should now work.
...
ref: bugfiler 386BSD-0.1.2.3/sys.386bsd/5
1993-05-13 21:39:34 +00:00
0d324be767
error message reporting fixed. patch from Gordon Burditt <gordon@sneaky.lonestar.org>
...
see also 386BSD-0.1.2.3/sys.386bsd/8.
1993-05-13 20:55:47 +00:00
1ffe55b9c2
add from net2. was symlink to ../../tahoe/tahoe/ns_cksum.c
1993-05-13 20:36:25 +00:00
a3219ac4fa
add from net2. were symlinks to ../../vax/include/*
1993-05-13 20:35:11 +00:00
0e180f179d
add from net/2 sources. was symlink to ../../tahoe/include/endian.h
1993-05-13 20:34:47 +00:00
6dedb5151c
add hp300 kernel files. generic kernel files might need some help...
1993-05-13 13:56:20 +00:00
194cda833c
now when halting, use printf()/cngetc() rather than pg().
1993-05-13 08:08:49 +00:00
e439c311cd
Whoops. One more 0x0ffff to expunge..
1993-05-11 04:15:22 +00:00
4c40e74463
1. id_irq is a u_short
...
2. "irq ?" sets it to (u_short)-1
3. "irq #" sets it to (1<<#)
4. not specifying an interrupt sets it to 0.
Until someone else comes up with a better scheme, that's the way it is.
If you have a driver that turns the interrupt off, set it to ZERO.
If, after calling XXprobe(), id_irq is still (u_short)-1, that is the same
as if probe() failed.
1993-05-11 04:06:23 +00:00
6161295a96
ring buffer code now uses rbchar's (shorts) instead of chars.
1993-05-10 23:14:54 +00:00
5b98726f57
interrupt counters increasted from 16 to 18.
1993-05-10 20:33:44 +00:00
a24e87fcfc
Floppy drives now print the same information as wd controllers
...
and scsi disks. See?
fd0 at fdc0 slave 0: 1.44MB 80 cyl, 2 head, 18 sec
Also, added a define for 720K disks, probably incorrect..
Note: the CMOS is used to find out what type the drive is.
1993-05-10 06:45:16 +00:00
545cc18754
This patch allows the wd device driver to tell how big the disks are on
...
WD1007-derived controllers. In this example, wdc0 is a WD1007-clone,
and wdc1 is a WD1003-clone. WD1007 controllers are generally ESDI
and IDE controllers.
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wd0 at wdc0 targ 0: 322MB 1224 cyl, 15 head, 36 sec <disktype>
wdc1 at 0x170-0x17f irq 7 on isa
wd2 at wdc1 targ 0: (unknown size) <disktype>
1993-05-10 05:53:22 +00:00
9948c39839
npx patches from Bruce Evans. patchkit 10002
1993-05-09 23:02:34 +00:00
5ae997897e
i thought i deleted this line before!
1993-05-09 04:25:48 +00:00
ca0db18897
multiple master controllers would probe tthe first one N times instead of
...
once each. never mind not worth worrying about what i;m talking about.
1993-05-08 00:50:10 +00:00
ca1b23d6dd
no irq == -1, or, actually, 0x0ffff (f*ing unsigned short...).
...
this would break devices w/o interrupts (like lpa).
1993-05-07 10:38:04 +00:00
f67f677c45
expand DDB's db_symtab array size
1993-05-07 09:22:40 +00:00
33b1886f5c
make it match GENERICISA, minus SCSI
1993-05-07 09:04:56 +00:00
ca1c6505ed
add rcsid, and kernel description where necessary
1993-05-07 08:33:00 +00:00
21f3bbf107
add PC speaker driver pseudo-device
1993-05-07 08:32:23 +00:00
31efd153ad
fix typo on if_ix line, and add rcs id
1993-05-07 08:26:13 +00:00
fe6fbb52a8
add counter for vmstat, and fix for bde's changes. from pk patch 137
1993-05-07 07:10:59 +00:00
caeddf5aa0
add PC speaker driver. from 386bsd patchkit patch 135
1993-05-07 06:50:18 +00:00
29b62cda9e
add defs for com3 and com4, and add device sizes
1993-05-07 06:47:47 +00:00
39b6779185
add entries for speaker and dcfclock, and clean up.
1993-05-07 06:42:13 +00:00
17813dd8e8
add entries for dcfclock, ix ethernet, and speaker
1993-05-07 06:33:34 +00:00
95df3ee14f
update for speaker, lpt, lpa, and new serial ports. from patch 135
1993-05-07 06:31:03 +00:00
5220c82b50
fix lpt driver and add lpa driver. from 386bsd pk patch 133
1993-05-07 05:38:55 +00:00
b1c02394c3
add some explanatory comments from 386bsd patchkit patch 113
1993-05-07 05:22:14 +00:00
5ae4dd1123
make kernel name a bit less confusing...
1993-05-06 12:17:06 +00:00
c5d886aff7
diffs for uname (posix!) system call, provided by John Brezak <brezak@osf.org>
1993-05-06 10:46:12 +00:00
5a4886054c
missed three config files going from pseudo-device DDB to options DDB
1993-05-05 13:56:25 +00:00
c41fbfff1c
if we timeout asking for kernel name, print a \n before proceeding.
...
Funny how one character can bug ya so much, eh?
1993-05-04 10:22:39 +00:00
a0bcb17e60
support for making dev->id_alive be set, this is for iostat to
...
find disk devices. wee bit of a kludge. sub-device attach()
routines must now return 1 for successful attach(), 0 otherwise.
Other bsd's do this too..
1993-05-04 08:27:29 +00:00
ad845984f9
add pg_wait, which must be set if you want pg() to actually wait for keybd
...
input. this one is way useful...
1993-05-04 05:47:50 +00:00
65a923d8bd
add a friggin' serial port... the machine has one...
1993-05-04 05:45:26 +00:00
1ce79756b4
make serial ports have right numbers, and add slip to generic kernels
1993-05-04 05:37:50 +00:00
955bf47eda
Don't autorepeat locking keys. (Can someone test this with X?)
1993-05-04 05:00:26 +00:00
70754f5c6b
fixed loopback == nuke problem.
...
This fix is probably not optimal, but it works.
1993-05-04 02:37:27 +00:00
40c0863828
necesssary fix before the ISO, and NS stuff has even a prayer of working.
...
Jolitz while garbage-collecting the ISO shit, also garbage collected the
DO_NET(NETISR_XXX.... support for them. CCITT is still broken, i think
because this snapshot's version is hosed.
1993-05-03 08:44:06 +00:00
11dce888dd
fixed silly typo.
1993-05-02 20:14:48 +00:00
bd05104f48
add barebones accounting, enabled w/"options ACCOUNTING", via /dev/acct
1993-05-02 09:22:31 +00:00
6c15f33674
Fix error in last change. B-P
1993-05-01 19:12:45 +00:00
52fb00ad70
Move bpfattach() call into weattach().
1993-04-30 23:48:35 +00:00
c3c6f70cea
Move bpfattach() call into hpattach().
1993-04-30 23:44:03 +00:00
62779eaa02
GENERICAHA_DDB was too big, so got rid of wd support in it.
...
moved it to GENERCISA_DDB, which has no SCSI support
1993-04-29 23:38:21 +00:00
d8bbdeb956
generic kernel w/aha1542 and debugging support
1993-04-29 13:01:52 +00:00
8f65320eb1
Fix total bogosity in the receiver code.
1993-04-29 09:33:21 +00:00
828d4bea99
make sure you can't include ahb or bt when you've got an aha
1993-04-29 03:33:36 +00:00
f49a375e07
use ed instead of ex. the script to use is identical, and we might
...
want to switch back to using ex when our ex supports -.
1993-04-29 03:27:39 +00:00
dbeb3a98e0
HP cards use 32 I/O ports, not 16.
1993-04-28 23:57:42 +00:00
12a9b7370a
Fix silly compilation error.
1993-04-28 23:39:37 +00:00
a2ced7f28c
Ensure the rmaouthdr shell script is executable before running it!
1993-04-28 08:45:51 +00:00
b740fbac92
bsd->netbsd
1993-04-28 06:37:52 +00:00
d49f6418c3
386bsd -> bsd for kernel name, and kill weird binary...
1993-04-28 05:38:44 +00:00
001605b441
new kernel name is "bsd" also, add "o*" to list of kernels to boot.
1993-04-28 05:32:55 +00:00
a9cf567abe
get rid of the silly quotes
1993-04-28 05:31:03 +00:00
6e6bd08b30
new kernel name is bsd
1993-04-28 05:28:56 +00:00
e4996a015e
Oops. sgetc() is used elsewhere, so should not be static.
1993-04-26 19:12:06 +00:00
c08b444d52
id for scsi_attach must be an int.
1993-04-26 11:54:23 +00:00
49515ccd94
Make fillw faster in the usual case.
1993-04-23 06:33:20 +00:00
e621c508ff
Rename sput to sputc and make it and sgetc static.
1993-04-22 20:20:56 +00:00
77afdc4037
Use rb_read to gather output; do exactly 4 spl calls, and don't hold the
...
interrupts locked very long, lest we overrun our serial port FIFOs.
1993-04-22 07:56:23 +00:00
f771146361
Round to nearest when generating 8259 clock frequency (from 386BSD path 113).
1993-04-22 04:30:53 +00:00
36b1304dc1
Make mbuf sizes tunable from config file (from 386BSD path 134).
1993-04-22 03:54:17 +00:00
efc059f15c
Huge performance improvement (not so bloody many spl calls)!
1993-04-21 00:04:14 +00:00
dcdfedf042
Slight performance improvement.
1993-04-20 23:45:21 +00:00
95c46ca69f
Fix typo in last change.
1993-04-20 23:09:36 +00:00
bc2b258174
Don't output NULs.
1993-04-20 23:03:41 +00:00
093fcad5da
deleted old comments at behest of original author :-)
1993-04-20 02:45:58 +00:00
f6eaf9096e
compile needs to be kept in the distribution
1993-04-19 23:30:06 +00:00
0244a6c112
Add config for Mycroft's 386 box.
1993-04-19 12:46:10 +00:00
81b91f4488
Fix subtle word-size error.
1993-04-19 06:02:16 +00:00
eaea84d1a9
bt can't coexist with aha
1993-04-19 04:27:53 +00:00
e2b92c3fc0
Return correct value for new probe sequence.
1993-04-18 10:24:56 +00:00
0105f6f55d
Return correct value for new probe sequence.
1993-04-18 10:14:15 +00:00
e2a9eb19a4
slight code quality improvement. not related to the bug with very
...
old controllers or disks! :-)
1993-04-18 10:03:20 +00:00
ba40575afe
Use new format for attach message.
1993-04-17 04:46:12 +00:00
a978d6900e
Fix silly typo.
1993-04-17 01:40:36 +00:00
e0cc195419
Add entry for HP ethernet driver.
1993-04-17 01:40:10 +00:00
e415187cd4
Add driver for HP ISA and EISA ethernet adapters.
1993-04-17 01:39:27 +00:00
c9a19fb3f9
Add config for Mycroft's 486.
1993-04-17 01:22:04 +00:00
6bee5294bc
ioconf changes, see previous cvs's that dumped core
1993-04-15 07:57:50 +00:00
fbecd3e987
Once more: some changes to the ioconf.c structure. It will now handle
...
devices hanging off controllers, any kind of controller.
A device on isa0 is called at probe(self), then attach(self)
A controller on isa0 is called at probe(self), then all it's children with
defined unit numbers are initialized by calling attach(subdev); next all
subdevices with unit ? are initialized by calling attach(sundev).
Almost all device entry points is now like the vax/sun model (intr being
the weird one)
1993-04-15 07:52:08 +00:00
6eb0490333
NDDB made a re-appearance....
1993-04-15 07:11:01 +00:00
e42c6edf94
ooops. DDB instead of NDDB. A typo, i swear
1993-04-15 07:09:23 +00:00
653e85f75a
#ifdef DDB fix
1993-04-15 07:01:16 +00:00
bf6814fb30
wd driver would fail on calling wdgetctlr() for older drives and
...
controllers. New behaviour is that if the standard method fails, try
to recalibrate the drive. Success means the drive exists. patch by
hpeyerl@novatel.cuc.ab.ca (who owns several of these historical
artifacts)
1993-04-15 06:39:00 +00:00
136c7a5766
got rid of options for hacked com driver; it's not in this tree,
...
they shouldn't be in the config file. not that SUN_LAMP has
com ports anyway...
1993-04-12 19:25:38 +00:00
469f8e3f30
kernel config files that know the new scsi system
1993-04-12 11:39:53 +00:00
f262b564a2
new scsi subsystem.
...
changes also in config/mkioconf.c & sys/scsi/*
1993-04-12 08:17:23 +00:00
9fb6e78a30
need com[01] rather than com[12]
1993-04-11 20:42:46 +00:00
c9b2b84704
changed ident
1993-04-11 18:56:21 +00:00
7f77252a93
Whoops. vidio card io space is 16 bytes large, not 8 bytes large. probe
...
now returns the right thing
1993-04-11 10:16:54 +00:00
fda0ef9095
nay, pccons.c still did not return the right thing from probe.. --> 8
1993-04-11 07:09:29 +00:00
1edb36e917
name of root device for new scsi system is 'sd'. duly noted.
1993-04-10 21:58:52 +00:00
49828746dc
aha (aha1542) and ahb (aha1742) conflict; can't put them in the same
...
config file
1993-04-10 21:55:49 +00:00
de2ed850e7
made it appropriately generic, and added PCFS and KERNFS support
1993-04-10 21:21:33 +00:00
506ea71fe9
was saying "not responding" on failed probe. that's bogus.
1993-04-10 21:09:13 +00:00
36cc48db29
give boat-anchor a PCFS
1993-04-10 20:46:46 +00:00
88bd702a3e
Added NFSSERVER,NFSCLIENT where appropriate.
1993-04-10 20:17:43 +00:00
c63d09563c
Added NFSSERVER,NFSCLIENT where appropriate.
1993-04-10 20:17:28 +00:00
8303bbe115
Fixed so they are useable when compiled with options NS. Not that I know
...
anyone who will.....
1993-04-10 15:58:56 +00:00
d71eceecbe
Fixed so they are useable when compiled with options NS. Not that I know
...
anyone who will.....
1993-04-10 15:58:53 +00:00
2c42cb9c01
Fixed so they are useable when compiled with options NS. Not that I know
...
anyone who will.....
1993-04-10 15:58:48 +00:00
4bf29fa831
Fixed so they are useable when compiled with options NS. Not that I know
...
anyone who will.....
1993-04-10 15:58:45 +00:00
eb096667f4
Added support for NS checksums by stealing portable code from net2. would
...
need to be optimized to use.
1993-04-10 15:57:22 +00:00
2db838a0c3
Added ISO,CITTT,NS stuff. still missing a few things. up to 798k
1993-04-10 15:55:16 +00:00
658490ec17
print out useful information on boot, and do something
...
a bit more intelligent with the extended memory size...
1993-04-10 13:47:49 +00:00
aa545c2955
we don't config as0 in, let alone swap on it...
1993-04-10 12:50:17 +00:00
bb14fa85f6
bump number of ptys up to 16, and maxusers to 24...
1993-04-10 12:30:35 +00:00
034707f9e5
fixed to be compliant, subservient, and to take advantage of the newly
...
hacked config(8)
1993-04-10 12:04:35 +00:00
d909074def
fixed to be compliant, subservient, and to take advantage of the newly
...
hacked config(8)
ALL config file should gradually get all the configurable options,drivers,etc
1993-04-10 12:03:30 +00:00
743ec551cf
Check for malloc() failure in pmap_enter().
1993-04-10 00:52:34 +00:00
fa76d62392
have probe return size of io space on successful return, rather
...
than simply 1.
1993-04-09 16:43:56 +00:00
c2176edbac
have probe return size of io space on successful return, rather
...
than simply 1.
1993-04-09 16:25:07 +00:00
2bbe287e49
make printing of i/o addresses a bit prettier, and fix off-by-one error.
1993-04-09 16:24:26 +00:00
cf15785585
from Rodney W. Grimes (rgrimes@agora.rain.com) (patchkit patch 117):
...
This patch adds the symbol names to icu.s that vmstat expects
the interrupt counters to be called. It also adds code to config
so that the names of the interrupts are written at the end of vectors.s
so vmstat can report real device names. It also cleans up and enables
the logging of stray interrupts. The counters for false interrupts
are added but the fix for them is not (the fix I have is not done
very good.) A false interrupt is when a device asserts it's interrupt
signal, then removes it before the 8259 can latch it. This is the number
one cause of stray IRQ7's and IRQ15's.
Additional device probe information is now printed. This includes
ending I/O address (many drivers do not return the correct value from a
probe this still needs to be fixed), memory address and size, driver
flags passed in by config.
1993-04-09 13:43:40 +00:00
9dc3975ffe
from Rodney W. Grimes (rgrimes@agora.rain.com) (patchkit patch 117):
...
This patch adds the symbol names to icu.s that vmstat expects
the interrupt counters to be called. It also adds code to config
so that the names of the interrupts are written at the end of vectors.s
so vmstat can report real device names. It also cleans up and enables
the logging of stray interrupts. The counters for false interrupts
are added but the fix for them is not (the fix I have is not done
very good.) A false interrupt is when a device asserts it's interrupt
signal, then removes it before the 8259 can latch it. This is the number
one cause of stray IRQ7's and IRQ15's.
Additional device probe information is now printed. This includes
ending I/O address (many drivers do not return the correct value from a
probe this still needs to be fixed), memory address and size, driver
flags passed in by config.
1993-04-09 13:27:46 +00:00
b9bd4b25de
dmesg output at boottime now tries to print out information as
...
soon as it is available. The output looks much more like Sunos.
1993-04-08 08:26:46 +00:00
161d9cd1a9
to get scsi system, you now use "options SCSI" rather
...
than "controller scbus0" -- makes more sense
1993-04-08 04:08:00 +00:00
3c5df8a123
put scsi system file list in the right place (finally)
1993-04-08 04:05:33 +00:00
fe6c03e9c7
/* ... /* ... */ problem in an include file
1993-04-07 09:15:28 +00:00
76a489d2f4
wd7000 entry
1993-04-06 20:59:57 +00:00
de24d978d5
wd7000 device driver, put in IO_WDS entry in isa.h. You can now build a
...
kernel with it. Hope your dma works better than mine <grr>
1993-04-06 20:58:01 +00:00
a2b4863160
ripped out a message
1993-04-06 12:09:55 +00:00
65ac2c0ded
<no drive> message gone.
1993-04-06 12:04:04 +00:00
5190737035
fd.c -- changed type=0 to correspond to "drive not found"
1993-04-06 11:52:35 +00:00
5aa76ea692
Modified floppy and WD enties for mod-barsoom controller type.
1993-04-06 10:49:30 +00:00
8ed3c049a1
deraadt@fsa.ca's kernel config file
1993-04-06 10:08:17 +00:00
9b67a6d7ad
Mod-barsoom wd additions. config program + kernel config files changed too.
...
fd support had to change slightly too.
1993-04-06 10:06:28 +00:00
c3d2e42be0
added: incomplete wd7000-asc scsi controller device driver.
1993-04-06 10:04:46 +00:00
2633c2e52a
added `options KTRACE'
1993-04-03 07:33:10 +00:00
5d07e08579
added changes from Steven Reiz <sreiz@aie.nl> (based on
...
those by Poul-Henning Kamp <phk@data.fls.dk>) to get the kernel
to compile properly when gcc2.* is cc. (should still work
when gcc1.39 is in use.)
1993-04-03 02:15:18 +00:00
9483844857
changed value of NKMEMCLUSTERS, to help avoid kmem_map too small problem
1993-04-01 00:06:43 +00:00
2cfe39f580
changed value of bufpages, to avoid kmem_map too small problem
1993-04-01 00:06:04 +00:00
90c4f693aa
added prompt for floppy root disk.
1993-03-29 22:30:55 +00:00
cdbb68cef9
added ISOFS
1993-03-28 21:33:28 +00:00
c32e85d3c3
moved closing #endif to include comselect
1993-03-27 09:24:42 +00:00
ea32437759
added default addresses for SCSI board I/O ports
1993-03-26 23:47:23 +00:00
7a7dea3ac1
test kernel config for 'options KTRACE'
1993-03-26 22:15:53 +00:00
d367597465
added bpfilter pseudo-device, and FDESC and KERNFS options
1993-03-25 10:58:20 +00:00
bec78ceec5
added config file for the boat-anchor.cs.berkeley.edu,
...
a 386-20 with a 387 math coprocessor
1993-03-25 00:19:33 +00:00
fe88b8df06
brought in drivers from David Greenman's (davidg@implode.rain.com)
...
BPF package
1993-03-24 23:54:19 +00:00
8615983a25
now use absolute path for dbsym
1993-03-24 18:48:57 +00:00
be757e0c2d
config file for filesystem testing kernel (on boat-anchor)
1993-03-23 23:55:35 +00:00
b6f6a2998a
turned off option for WD8013.
1993-03-23 10:08:44 +00:00
1fe24ceec0
initial creation of kernel config for sun-lamp.cs.berkeley.edu,
...
a 486-50 EISA machine.
1993-03-23 08:50:03 +00:00
b11134a584
automatically run dbsym on kernel
1993-03-23 08:22:28 +00:00
f23291fb78
added support for microtime routines by Steve McCanne (mccanne@ee.lbl.gov)
1993-03-23 08:12:09 +00:00
e541169ce2
after 0.2.2 "stable" patches applied
1993-03-21 18:04:42 +00:00
61f282557f
initial import of 386bsd-0.1 sources
1993-03-21 09:45:37 +00:00
mycroft