mjacob
dc86769bb7
Add in MI target mode code modules
2000-01-05 19:50:05 +00:00
ad
59a1ab9791
Add two new members to 'struct wsdisplay_font': 'bitorder' and 'byteorder'.
2000-01-05 18:44:21 +00:00
ad
a0d0bf907a
Use pcdisplay_cursor_init().
2000-01-05 18:27:47 +00:00
ad
8f3fd0d6b3
Spelling.
2000-01-05 16:28:39 +00:00
ad
e75404417a
Add and use pcdisplay_cursor_init(). Still a couple of nits with this, I
...
will resolve when I can test properly.
2000-01-05 16:14:35 +00:00
ad
ea89296a61
Back out previous. A proper fix will follow.
2000-01-05 16:04:00 +00:00
drochner
f6ee10996d
regen
2000-01-05 12:15:00 +00:00
drochner
28828c88e8
add Kubota Denali
2000-01-05 12:14:33 +00:00
drochner
6f64d1e85f
regen
2000-01-05 11:32:43 +00:00
drochner
2abcb85b5f
add some stuff which was mentioned on the mailing lists recently
2000-01-05 11:32:06 +00:00
drochner
b32647d4ea
replace embedded _rcsid[] string by __KERNEL_RCSID(), remove _copyright[]
2000-01-05 11:19:36 +00:00
oster
d4dfa2a664
Make sure we really get something back from RF_Malloc before we use it.
2000-01-05 04:15:30 +00:00
oster
77ab4d1598
- update RF_CREATE_THREAD to handle a 'process name' argument.
...
- fire up a new thread for parity re-writes, copybacks, and reconstructs.
The ioctl's which trigger these actions now return immediately.
- add progress accounting for the above actions.
- minor rototillage of rf_netbsdkintf.c to deal with all of the above.
2000-01-05 02:57:28 +00:00
mjacob
182c6629c1
oops, bad patch
2000-01-04 22:47:12 +00:00
mjacob
c763ef5b5d
- If the user application issues an INITIALIZE ELEMENT STATUS which
...
succeeds, note that we now are valid.
- Don't attempt to try and run initialize element status from interrupt level-
we don't really support that yet. Also, key more correctly off of ASC/ASCQ
instead of just the sense key.
- Make the practice of doing an INITIALIZE ELEMENT STATUS automatically when
we get params (from chopen time even) a policy decision that is not the
default for now- this can be a dangerous practice as well as time consuming.
It's dangerous in that you can have a hung open when all you really want
to do is do a read of parameters- and parameters, including slot status,
are perfectly fine to read even before an INITIALIZE ELEMENT STATUS is
done- all the elements whos status your read are going to be marked with
an exception- so leave it up to the application to decide how important
this is.
2000-01-04 22:35:57 +00:00
chopps
d8a4f43d0f
convert to support non-dma IO (for the isa Riscom/N2).
...
allow the user to set and use the internal baud rate generator
fix the transmission ring logic to support more than 1 frame per interrupt
add autodetection of the base clock frequency.
cleanup the receive ring logic
support dynamically resizing the low-water mark on the fifo in response
to buffer underruns on transmit.
2000-01-04 06:36:29 +00:00
chopps
a4d9bd9484
Add support for setting the clock and adapt the code to the new more
...
generic ic/hd56470.c core which now supports the isa version of the
same card.
2000-01-04 06:31:39 +00:00
chopps
882236e45c
add if_ntwo_isa driver for the Riscom/N2 card.
2000-01-04 06:30:04 +00:00
chopps
93bc2af93e
Add Riscom/N2 isa driver, most of the probe code was adapted from the
...
freebsd if_sr.c driver.
2000-01-04 06:29:21 +00:00
sommerfeld
9aeb6a25d2
minor KNF tweaks
2000-01-02 02:08:07 +00:00
sommerfeld
b38548c58d
On a cold suspend to disk, the Sony VAIO Z505 BIOS appears to not
...
preserve enough of the state of the PCIC to keep it interrupting on
card insertion/removal..
Add a power hook to notice if the CSC_INTR device register is zeroed
on resume, and if so, reset it to a sane value.
2000-01-01 21:57:45 +00:00
ad
6d88cc0622
- Make sense out of comment on dpt_wait().
...
- Trivial streamlining of logic in dpt_poll().
2000-01-01 19:56:59 +00:00
hubertf
e9e9f381a1
Add an entry for the Trident Microsystems CYBER 9525
...
(as found in an Toshiba Satellite 2650 XDVD).
1999-12-31 00:12:41 +00:00
hubertf
ac50ee0e91
Add an entry for the Trident Microsystems CYBER 9525
...
(as found in an Toshiba Satellite 2650 XDVD).
1999-12-30 23:53:42 +00:00
tron
a3f8a54bf4
Regen.
1999-12-29 21:29:02 +00:00
tron
5228e12283
Add vendor and product code for Solid Year USB keyboard provided by
...
Ichiro Fukuhara in PR kern/9070.
1999-12-29 21:28:31 +00:00
kleink
1e9bb239a3
Off-by-one error in limiting the DMAC buffer size for Audio 2 to 64K (actually
...
64K - 1); from Dave Sainty in PR kern/9064.
1999-12-28 19:26:26 +00:00
kleink
f6655d0f7e
Fix a buffer KVA comparison botch in eso_mappage(); from Dave Sainty in
...
PR kern/9062.
1999-12-28 01:39:38 +00:00
matt
6b0de2aa24
Off by one error in station events.
1999-12-27 22:41:04 +00:00
itohy
38e8851905
- Unmuting an external input source (CD playback, line input, and speaker)
...
now prevents power down/save the device.
The external input sources are muted by default at initialization.
- Change "power.power.*" to "power.save.*". Sorry, spec change....
- Shorten tsleep(9) ident string for "ps l".
1999-12-27 03:21:56 +00:00
soren
841d4966c3
Lower-case Bus-Master for consistency.
1999-12-26 21:46:23 +00:00
tsutsui
f1a6ac445d
Use htole32() and le32toh() instead of SCR_BO().
...
XXX Should we still keep non-NetBSD part?
1999-12-26 10:41:22 +00:00
augustss
5034afeb8e
Regen.
...
And Merry Christmas!
1999-12-25 21:56:37 +00:00
augustss
878c0331ff
Alphabetize.
1999-12-25 21:55:59 +00:00
augustss
60ca103a0c
Regen.
1999-12-24 21:03:00 +00:00
augustss
e3ab0a35b1
Some minor name changes.
1999-12-24 21:02:38 +00:00
augustss
337c668339
Regen.
1999-12-24 18:03:32 +00:00
augustss
8dde7d012c
Add a few Ethernet adapters.
1999-12-24 18:03:05 +00:00
augustss
6e2f22c70f
Turn on the MAXP bit in the controller to allow 64 byte packets at
...
the end of a frame.
1999-12-24 13:56:35 +00:00
augustss
3150a2103c
Reverse the sign on the wheel data. I got it wrong from the start.
1999-12-24 01:14:01 +00:00
leo
384bdc532b
Implement the DIOCKLABEL ioctl. Through this ioctl it it possible keep the
...
disklabel on the last close or to drop it.
1999-12-23 21:23:19 +00:00
augustss
aafe48897d
Regen.
1999-12-23 19:46:27 +00:00
augustss
c1ea7e7feb
Add the WebGear Aviator2.4 card. No driver yet, though. :(
1999-12-23 19:45:56 +00:00
matt
711fcf6e2f
Add some defensive code to the unsolicited event printing
1999-12-23 18:14:59 +00:00
pk
2afd4d3aec
* remove full duplex modes for the internal transceiver
...
* internal transceiver needs to be reset for the BMSR_LINK bit to
be even remotely reliable
* because of previous, maintain link state, so we won't be sensing speed
all the time when interface flags need to be changed (e.g. entering/exiting
promiscuous mode)
* in auto-speed mode, report link condition changes on the console
1999-12-23 16:39:56 +00:00
wrstuden
ba7b2b4124
Make the bitfields in here work on big-endian machines. How this ever
...
worked is unclear.
Patch from thorpej, tested by me.
1999-12-23 00:15:12 +00:00
augustss
0e7b1b9ec1
Use the flags `locator' to govern if devices are detected early or
...
late during cold boot.
1999-12-22 23:54:09 +00:00
pk
7ab5ad7988
Streamline media code a bit by some `pseudo-mii' code designed to handle
...
the on-board transceiver.
1999-12-22 16:05:12 +00:00
pk
f037f3be7e
Shuffle some code around to allow two PHYs to attach. Only one PHY can
...
be used at a time, but it's now possible to select one by using ifconfig(8)'s
`instance' parameter.
1999-12-21 21:07:42 +00:00
drochner
caaf1beab2
change decoding function to return multiple symbols per keypress
...
(through the "internal" structure), derive a METAESC flag from the
layout variant and translate ALT-<key> into ESC <key> if the flag is set
1999-12-21 12:02:04 +00:00
drochner
54e8bcd294
add a symbol for keyboard variant bits which are not handled by the
...
mapping code
1999-12-21 11:59:13 +00:00
drochner
fc4003355e
introduce a METAESC keyboard variant bit
1999-12-21 11:57:59 +00:00
drochner
b95651b752
set carrier early if used as console or kgdb line, fixes PR kern/6547
...
by Andreas Gustafsson, gson@iengines.com
1999-12-21 11:04:36 +00:00
pk
03c8221ad0
Use BMSR to test for `negotiation complete'; the alternative bit in the
...
LXT vendor register 20 is latching high and resets to low on read causing
subsequent status request to return `IFM_NONE'.
1999-12-21 10:47:00 +00:00
pk
bbbbfe896e
* Remove spurious blockade in the path to get the transceiver status word.
...
* Make sure to flip the 10baseT/100baseTX bit when doing autoselect.
* Miscellaneous cosmetics.
1999-12-20 22:23:39 +00:00
pk
d135edf1a7
#define the bit positions of the MIF I/O lines.
1999-12-20 22:19:11 +00:00
haya
35a9d47da9
Maintanance for Ricoh RL5C475. VAIO 505TX uses this chip.
1999-12-20 08:11:42 +00:00
mjacob
67944140cf
oops, got the initiator and initiator/target f/w reversed for the 1080
1999-12-20 04:25:56 +00:00
tsutsui
2f3ba68db9
Add more SCR_BO(). NCR53c875 now works on macppc.
...
XXX All SCR_BO() macros should be replaced with htole32() or le32toh().
1999-12-20 03:37:06 +00:00
augustss
a1352b2625
Make sure tsleep() is not called during cold boot.
1999-12-20 02:12:23 +00:00
mjacob
5babd2b8c9
get back to looking at config flags
1999-12-20 00:49:58 +00:00
mjacob
955d4bb00b
clean up some f/w revision stuff. clean up some dualbus stuff.
1999-12-20 00:39:16 +00:00
mjacob
83931d33df
clean unused fwrev stuff
1999-12-20 00:38:21 +00:00
mjacob
8f18ef5b45
restore (by request) CFGPRINTF to DIAGNOSTIC level kernels
1999-12-20 00:37:49 +00:00
mjacob
be6fe10ee6
get back to looking at config flags
1999-12-20 00:33:17 +00:00
mjacob
775b699ee1
add in initiator mode only f/w versions
1999-12-20 00:22:56 +00:00
augustss
33f8460f90
Change the way the initial configuration value is picked.
...
Idea from Matthias Drochner <M.Drochner@fz-juelich.de>
1999-12-18 23:22:54 +00:00
augustss
33cf622176
Add another debug printf.
1999-12-18 22:51:58 +00:00
augustss
e284dc9cfd
Make these files compile on 64 bit archs.
1999-12-18 22:47:11 +00:00
pk
85a78db7b1
Add support for selecting a PHY (i.e. built-in transceiver vs. external MII
...
device) by using media/instance parameters.
1999-12-18 14:05:37 +00:00
tsutsui
7374a44f77
Use bswap32() as SCR_BO() macro to avoid unexpected side effects.
...
SCR_BO(*src++) caused some trouble.
1999-12-18 07:57:03 +00:00
drochner
5257d9712e
regen
1999-12-17 17:19:11 +00:00
drochner
289c969284
add Intel 450NX stuff
1999-12-17 17:18:48 +00:00
pk
60eeab910b
Avoid feeding negative values to the `roundup()' macro.
...
Configure the MII management interface earlier.
1999-12-17 14:37:15 +00:00
pk
aaffba693c
Fix status bit symbols strings.
...
Rename MII receives enable bit to be in sync with the STP2002 datasheet.
1999-12-17 14:34:25 +00:00
augustss
b58b4d7541
Regen.
1999-12-17 14:07:45 +00:00
augustss
593f478d64
Add a 3Com camera.
1999-12-17 14:07:21 +00:00
augustss
6b1620b095
Remove extra #endif so we can compile again.
1999-12-17 14:06:43 +00:00
augustss
b7b9264da6
Regen.
1999-12-17 14:00:12 +00:00
augustss
78ba345df3
Change the Galileo entries so the generated code can be compiled.
1999-12-17 13:59:44 +00:00
fvdl
8b98cf56b6
Deal with cable problems gracefully. From Onno van der Linden.
1999-12-17 08:26:31 +00:00
ad
3fc9d6b40e
Indicate that rcons is a dead end and that doing something more wsconsish is
...
recommended.
1999-12-17 01:41:52 +00:00
soren
3017275313
Regen.
1999-12-17 01:04:47 +00:00
soren
fd4557865d
Fix comment.
1999-12-17 01:04:29 +00:00
soren
bf75bd8856
Regen.
1999-12-17 01:03:45 +00:00
soren
fdab32f446
Add Galileo Technology system controllers.
...
Remove obsolete ID database URL.
1999-12-17 01:02:03 +00:00
abs
43838a47fd
Add back cut Cardbus_conf_write/cardbus_conf_write lines.
1999-12-16 21:04:10 +00:00
ad
ea17a0d147
Remove part of a bogus comment and put it in a more appropiate spot.
1999-12-16 15:07:00 +00:00
ad
624ebb55cb
Dispatch another nit.
1999-12-16 13:27:24 +00:00
mjacob
edf809c8b6
Dual LVD (1280) support.
1999-12-16 05:35:42 +00:00
augustss
fc03707eef
Add even more debug output.
1999-12-15 23:00:05 +00:00
augustss
0164856f79
More debug printfs.
1999-12-15 20:05:08 +00:00
ad
38fdaf4b34
Fix comment.
1999-12-15 15:34:18 +00:00
ad
9bfaff072d
Now I remember. Add a new flag, WSFONT_RDONLY that indicates the font
...
to be added to the table should not be modified; i.e. if modifications
are needed, a copy should be made.
1999-12-15 15:27:57 +00:00
ad
f607dfe4dd
- Change prefix for Bt459 register defs to BT459_IREG to indicate that
...
these are indirectly accessed registers.
- Add defs for directly accessed registers to bt459reg.h.
1999-12-15 15:09:36 +00:00
kleink
2fd74b0fb4
Normalize symbol names used for multiple inclusion protection.
1999-12-15 12:28:54 +00:00
kleink
5dc4b19d4d
Report the Capability List support bit of the SR and, if set, print the
...
the Capability list pointer register as such as well as the capabilities
implemented in the list.
1999-12-15 12:27:26 +00:00
tsutsui
b5084582c9
add one more htole32().
...
fixes "tlp0: filter setup timeout" on my macppc.
1999-12-15 12:23:32 +00:00
kleink
56060556e3
Report all AUDIO_PROP_* properties when attaching an audio device.
1999-12-15 12:09:34 +00:00
kleink
6a318fe223
Regen.
1999-12-15 11:55:35 +00:00
kleink
eec28e9605
* Add ESS Maestro2 product ID.
...
* Add TerraTec vendor ID.
1999-12-15 11:52:55 +00:00
pk
967d744acd
Correctly encode the configured number of buffer descriptors.
1999-12-15 10:33:31 +00:00
explorer
387644d34d
regen
1999-12-15 05:49:44 +00:00
explorer
5e4e92603b
add another modem; from Dan J Fraser
1999-12-15 05:49:33 +00:00
oster
28c2380f21
Nuke a bunch of debugging cruft. No functional changes.
1999-12-15 02:02:16 +00:00
pk
9902ec50bb
* Probe the MII device.
...
* Ask for an interesting set of interrupt conditions.
* Correct various other typos and omissions.
1999-12-14 23:58:15 +00:00
pk
ea69621efe
Add a missing register offset.
1999-12-14 23:54:41 +00:00
ad
a8112faedb
- Squash a few stylish nits.
...
- Move font flags to wsfont.h. There is a point to this. I'll remember soon.
1999-12-14 22:35:17 +00:00
ad
977e07ff58
Note that per-depth initialization functions shouldn't be called by mere
...
mortals.
1999-12-14 22:25:13 +00:00
ad
88ad70226e
The ri_hw member was added to 'struct rasops_info'. This does the same thing
...
as ri_priv; since ri_priv is not used anywhere in the kernel, nuke it.
1999-12-14 22:20:28 +00:00
oster
fe0726b921
Whoops! Neglected to initialize the buffer queues for anything other
...
than raid0. Fix that...
1999-12-14 15:27:00 +00:00
augustss
3c1b8138f7
Add a device driver for the Cirrus Logic CS4280 sound chip.
...
The code has been contributed by Tatoku Ogaito.
1999-12-13 20:19:23 +00:00
drochner
ca8e2a94ea
First cut on an EGA driver. For initial testing, lacks some EGA vs CGA/MGA
...
identification. Can share more code with VGA later.
1999-12-13 16:28:57 +00:00
drochner
106e6868db
fix off-by-one error in font table initialisation
...
(mostly harmless because it is zero initialized in most cases anyway)
1999-12-13 14:04:06 +00:00
oster
c8753ea619
Rework how we do the 'wakeup' when an IO completes.
1999-12-12 20:52:37 +00:00
oster
706e3c13c0
Rename rf_DoAccessKernel() to raidstart() and cleanup arguments.
1999-12-12 20:52:16 +00:00
oster
e8a639b1df
Rototill the IO throttle code. Rename rf_DoAccessKernel() to raidstart()
...
and cleanup arguments. While we're here, cleanup raidstrategy(), and nuke
a bunch of unused debugging stuff.
RAIDframe + softdeps now play very nicely together.
1999-12-12 20:51:41 +00:00
tron
821c7a01f8
As suggested by Jason Thorpe back out revision 1.27 because it broke
...
PHY probing for the ThunderLan driver.
1999-12-12 17:55:21 +00:00
thorpej
014cd3fcc1
Take a stab at making this work on big-endian systems.
1999-12-12 17:46:36 +00:00
scottr
51fc367157
defopt RCONS_4BPP.
1999-12-12 08:17:28 +00:00
thorpej
afbb07a0e5
Use htole32() and le32toh().
1999-12-12 02:53:56 +00:00
thorpej
3716f21b7e
Use htole32().
1999-12-12 02:50:40 +00:00
thorpej
a661b4e5dc
Oops, forgot to byte-swap the receive descriptors.
1999-12-12 02:41:51 +00:00
explorer
4313f463a0
add 3com 575CT, which Dell (at least) seems to be shipping
1999-12-11 22:22:34 +00:00
thorpej
d4bb1032cb
Handle the 21143 PMCSR, like we do in the PCI front-end.
1999-12-11 00:39:13 +00:00
thorpej
caae0e1aa1
- Don't try to run the chip in big-endian mode. Not all chips support
...
this consistently, and it doesn't always work even when the chip
supports it.
- Make sure things DMA'd to the chip that the chip interprets are in
little-endian mode.
1999-12-11 00:32:59 +00:00
thorpej
085bc011ab
Add cardbus_get_capability(), cloned from pci_get_capability().
1999-12-11 00:29:11 +00:00
kleink
c88b5146dc
Add support code to have the Hardware Volume Control interact with the
...
software mixer Master Volume state in a defined way by lazily updating the
latter if input from the former was processed.
1999-12-10 19:13:00 +00:00
kleink
6d1d09f757
Add a symbolic name for the ES1946 rev. E in this place, too.
1999-12-10 16:50:52 +00:00
sommerfeld
d4cc45ba08
Fix hot-swapping for controllers which grab two ranges of port space.
...
(if the mapping of the second range succeeded, it would forget about
the window of the second address range, causing a subsequent insertion
event to fail..).
My Sony PCGA-CD51 now hot-swaps a lot better now.
1999-12-09 03:22:41 +00:00
oster
a0d72cb555
Trust only the data disk if the mirror is not known to be up-to-date.
...
(this should have been committed with a previous fix for the same
problem in another function in this file :( )
1999-12-09 02:26:09 +00:00
joda
9758d8ed66
check for NULL from malloc
1999-12-08 16:52:51 +00:00
mjacob
4b6c35ccaf
Respond to a crucial security alert.
1999-12-08 11:01:44 +00:00
nisimura
fa5e192541
One small mod. escaped from the last commit.
1999-12-08 09:41:24 +00:00
simonb
9208af106d
Protect against multiple inclusion.
1999-12-08 01:20:12 +00:00
thorpej
b67d4809ed
Add a driver for the National Semiconductor DP83843 `PHYTER' 10/100
...
Ethernet PHY.
1999-12-07 19:36:37 +00:00
thorpej
ff4a32590d
When checking the SROM checksum, if the standard location fails, try
...
the new standard location (according to the SROM format update document
for the 21143). From Masanori Kanaoka.
1999-12-07 18:24:01 +00:00
thorpej
546480874c
After reading the 21143 manual again, make sure SNOOZE is cleared in
...
the CFDA register, too.
1999-12-07 07:36:19 +00:00
thorpej
6e36651a27
Add the 21143 PMCSR offset, from Masanori Kanaoka.
1999-12-07 07:33:25 +00:00
thorpej
747d454ffe
Add the PMCSR offset for the 21143, and make sure to bring the 21142
...
and 21143 out of sleep mode. From Masanori Kanaoka.
1999-12-07 07:32:58 +00:00
thorpej
f773270d0d
If, on the 21143, we find that we don't have an ISV SROM, try reading
...
it again, with 8 address bits. 21143 Pass 4.1 has a larger SROM,
for storing the CIS when used in a CardBus application.
1999-12-07 07:20:17 +00:00
thorpej
3d60aecdd7
Make sure to bring the chip out of sleep mode. From Masanori Kanaoka.
1999-12-07 07:11:49 +00:00
oster
bd19af5aad
Nuke what's left of the DFSTRACE stuff.
1999-12-07 02:54:08 +00:00
oster
e65f9b7c87
More cleanup. DKUSAGE (what little was left of it) goes bye-bye.
1999-12-07 02:40:27 +00:00
oster
a38b721e5f
Nuke the last few bits of RF_DEBUG_ATOMIC that should have
...
disappeared a while back.
1999-12-07 02:13:28 +00:00
augustss
8111aaeef9
Cosmetics and a couple of diagnostic messages.
1999-12-06 21:06:59 +00:00
drochner
0893832078
update for changed struct wsdisplay_accessops:show_screen signature.
...
no functional changes
1999-12-06 19:25:56 +00:00
drochner
162086b1cd
do the screen switch asynchronously (via timeout(0)) if possible,
...
this hopefully helps for the (very rare) display corruption reported
in PR kern/8628
1999-12-06 18:54:50 +00:00
drochner
8996199a85
-allow the "show_screen" call to the display driver to complete
...
asynchronously, in the same style like the process attach/detach functions
-intercept the "cnpollc" call which originally went directly to the
keyboard driver and keep track whether the console is in "polling" state
(DDB!)
-pass a NULL callback to the screen switcher and the process attach/detach
functions if the console is "polling", to tell them that asynchronous
completion is forbidden
1999-12-06 18:52:23 +00:00
ad
801b079e37
If the vga driver isn't present in the kernel and PCDISPLAY_SOFTCURSOR
...
is set, then pcdisplay_cursor() should disable the hardware cursor first
time it is called.
1999-12-06 10:04:50 +00:00
danw
fa517eaed3
regenerate
1999-12-05 20:09:17 +00:00
danw
5a3161ddbc
add Epson EEN10B ethernet
1999-12-05 20:08:39 +00:00
thorpej
9eea13a674
Mark exactly 3 uses of the SCR_BO() macro as being bogus; these 3 uses
...
already involve byte swapping on big-endian systems due to bus_space_*().
However, the use is self-consistent, and the value is not interpreted
by the chip, so it probably does not matter. Leave them in for now; we
can always look at their removal later.
1999-12-05 19:40:18 +00:00
thorpej
8c1cbdbed5
Slight change to previous, to make it more obvious as to what's going on.
1999-12-05 19:33:13 +00:00
thorpej
d06db4b7da
I have the feeling that OpenBSD has never tried the 53c825a, 53c875, 53c875j,
...
53c885, 53c895, or 53c896 on big-endian systems.
1999-12-05 18:40:46 +00:00
thorpej
389c599f35
Changes from the OpenBSD `ncr' driver to byte-swap the script on big-endian
...
systems. Should make this go on e.g. the Apple Network Server.
1999-12-05 18:25:18 +00:00
mjacob
60416909de
Oops. The compiler didn't catch this 'used before set'. Kudos
...
to Sean Doran for finding it and being nice in telling me.
1999-12-05 18:20:53 +00:00
drochner
c3026431e3
some cleanup:
...
-don't set capabilities at compile time
-since our accelerated putchar() doesn't underline, don't claim so
-remove bogus character range check - fonts are not limited to ASCII
-use rasops_unpack_attr() instead of relying on rasops internals
1999-12-04 14:01:56 +00:00
drochner
f0b63a4aa2
-use the right namespace for screen capabilities
...
-make attribute decomposing a bit more friendly if the caller doesn't
care about underlines
1999-12-04 13:57:35 +00:00
ad
942f120fbf
Lay it out like the other fonts.
1999-12-04 13:40:21 +00:00
ad
43e59084c4
- Stylistic cleanup.
...
- Make ifndef'ed out bits look less like a statement of intent.
1999-12-04 13:35:42 +00:00
ragge
6aabd4d0c2
CL* discarding.
1999-12-04 12:11:13 +00:00
castor
b8a6774e36
Add support for Lava Computers MFG 2sp-pci and quattro cards.
1999-12-04 05:43:44 +00:00
castor
165dc789fb
Regen
1999-12-04 05:43:02 +00:00
castor
fce37d6113
Add vendor ID for Lava Semiconductor ( http://www.lavalink.com )
1999-12-04 05:41:08 +00:00
thorpej
111b1dc2ee
Regen.
1999-12-04 04:41:40 +00:00
thorpej
ddbe03436b
Add some of the Compaq RAID controller IDs.
1999-12-04 04:40:57 +00:00
mjacob
53ecdaee6c
Some queue related functions now use a u_int16_t. Turn some messages into
...
CFGPRINTF messages. Clear up the f/w download slightly. If less than
rev 5 2100 chip, turn off loop fairness. Clean up a botch or two.
1999-12-04 03:08:18 +00:00
mjacob
5854be051d
Make sure we have a big enough buffer to sprintf into (noticed by
...
deraadt@openbsd.org ).
1999-12-04 03:06:54 +00:00
mjacob
0f0fbfa802
Roll core version minor. Clean out some target mode stuff. Respecify some
...
queue related functions to take u_int16_t's. Restructure the softc a bit.
1999-12-04 03:06:05 +00:00
mjacob
f5c2acedc2
(wow- I thought I'd already committed most of this).
...
Clean up some isp_attach time stuff- if ISP2100_FABRIC is defined try *really*
hard to make sure that we get the firmware state to FW_READY and see the
loop state where the Port Database is ready to be gathered- if we don't do
this it's unlikely we will be able to correctly query the nameserver because
we won't see that we're on a fabric.
Clean up the completely broken and stupid attempts to hot switch the
'slow' start routine out of the way. Sigh.
Turn speed announcements into CFGPRINTF functions (available only if DEBUG
defined).
1999-12-04 03:04:59 +00:00
mjacob
e363023daf
Rearrange defines to make the file diff cleaner with OpenBSD. Change CFGPRINTF
...
and default verbose levels. Add in a forced compile in f/w define unless
either IS_DISABLE_FW or ISP_COMPILE_FW defined.
1999-12-04 02:59:29 +00:00
mjacob
e6da5abb16
Add back in inclusion of microcode and rationalize it. request/response
...
queue indices need to be u_int16_t wide.
1999-12-04 02:56:30 +00:00
mjacob
e5835e36c3
request/response queues now indexed via u_int16_t. Add back in f/w inclusion
...
and clean up it's compilation. get chip rev out of pci header.
1999-12-04 02:54:54 +00:00
sommerfeld
878fa4790f
Fix "make includes" since pckbc moved to dev/ic from dev/isa
...
(Hi, Jason!)
1999-12-04 02:16:24 +00:00
sommerfeld
97cb535e46
change comment to mention that this driver also handles the '558 and '559
1999-12-04 02:02:30 +00:00
thorpej
4560ac465a
Split the PC-like keyboard controller driver into chip back-end and
...
bus front-end.
1999-12-03 22:48:22 +00:00
kleink
eab9ce05b7
A PCI Revision ID of 0x02 is what ESS happens to be calling ES1946 Revision E.
1999-12-03 22:34:28 +00:00
mjacob
04debef27a
add back firmware with BSD style copyright as approved by Qlogic
1999-12-03 21:48:49 +00:00
thorpej
d8719f61c9
Get ready for some needed flexibility; put the IRQs to use for each slot
...
in the softc.
1999-12-03 19:02:49 +00:00
nisimura
54c58da2e5
The first order approximation of PMAGD SFB+ framebuffer. Proven not
...
working with 32bit PMAGD TURBOchannel option card (I got rainbow
colour virtical stripes on screen).
1999-12-03 09:50:53 +00:00
mhitch
901e4b0219
Fix IOASIC DMA alignment problems. Buffers not aligned on doubleword (8
...
byte) boundaries don't work correctly. Make use of the SDR0/SDR1 registers
to adjust the buffer alignment when starting the DMA transfer. Block device
I/O done by the filesystems will usually be aligned correctly, but character
device I/O may not be aligned correctly. This should fix the problems with
dump(8) failing randomly on DECstations.
1999-12-03 04:26:17 +00:00
oster
bed152a4e7
We don't support RF_DAG_TEST_ACCESS.
1999-12-03 03:35:30 +00:00
oster
128e2e90c5
Nuke some duplicate code.
1999-12-03 03:18:45 +00:00
oster
a038f90588
Kernel memory is not to be wasted. If we're bailing out because of an error,
...
give any allocated memory back to the kernel so someone else can use it.
1999-12-03 03:06:44 +00:00
oster
3888a71ad1
Move LIST_INIT() to a more appropriate place.
1999-12-03 02:43:22 +00:00
drochner
a00a9ff012
Convert to use rasops/wsfont, enabling colors.
...
For now, only the "putchar" and "copyrows" accelerations are used.
1999-12-02 23:04:44 +00:00
drochner
5c69a4c489
-initialize the colormap completely at compile time, to allow drivers
...
to use it early
-now we can declare it "const" (as "rasops_isgray[]", while we are here)
-don't use the fg/bg colors in ...alloc_attr() if the WSATTR_WSCOLORS
flag was not given - use reasonable defaults instead
-add an opaque "ri_hw" member to "rasops_info", for driver use
1999-12-02 22:57:13 +00:00
augustss
02faf8d588
Done something half sensible if a USB console keyboard is unplugged instead
...
of panic()ing.
XXX Untested. I will test it the next time I can borrow an iMac.
1999-12-01 23:22:57 +00:00
augustss
b687c3c859
Some more DIAGNOSTIC.
1999-12-01 23:19:11 +00:00
drochner
229f631a84
regen
1999-12-01 15:08:17 +00:00
drochner
1657f687be
add Cyclades 4Y and 8Y
1999-12-01 15:07:44 +00:00
augustss
a9aba751e7
Make it compile even if there is no wsdisplay.
1999-12-01 11:41:46 +00:00
augustss
b15fcce56c
Use vertical nscheduling for bulk traffic. It improves bulk thruput a lot.
...
From FreeBSD and Nick Hibma.
1999-12-01 00:42:05 +00:00
thorpej
66a51bd133
Quiet down the "excessive collision" messages w/ LEDEBUG. None of the other
...
Ethernet drivers really report this quite as loudly as this did.
1999-12-01 00:40:53 +00:00
drochner
a7ee57948b
-support 3c905B-COMBO - somewhat preliminary: the chip has both an internal
...
MII PHY capable of NWAY (according to the Linux driver) and plain BNC/
transceiver connectors. The shared code can't handle this yet, so leave
out MII/NWAY for now.
-print out revision number from PCI config header, this has been useful to
identify buggy chips
1999-11-30 19:16:51 +00:00
drochner
9faac4111e
regen
1999-11-30 19:10:38 +00:00
drochner
b5db34e4d5
add 3c905B-COMBO
1999-11-30 19:09:54 +00:00
ad
744ded4890
Register definitions for the PrestoServe option board (I've had this for
...
months and if it doesn't go here it'll die).
1999-11-29 15:06:28 +00:00
ad
4763c00196
- Don't use our own private endian conversion cruft (from OpenBSD).
...
- SmartRAID V is not and will never be an EATA board (from OpenBSD).
- Use dpt_outl() when issuing EATA command packet address to HBA.
- Fix a style nit.
- Fix a typo.
1999-11-29 15:04:23 +00:00
itojun
42abf0bf78
regen.
1999-11-29 12:55:20 +00:00
itojun
1b6504a175
improve cnw driver, looking at bsdi/freebsd-pao cnw driver by wide+prb@bsdi.
...
- implement ioctls compatible with bsdi/freebsd-pao. stat type is
changed from u_int to u_quad_t to avoid overflows. now it is possible
to switch domain/encryption key from the userland, using cnwctl(8).
- implement multicast/promiscuous mode. tested with IPv6.
1999-11-29 12:53:59 +00:00
itojun
a075f72b0e
cnw driver ioctls, from FreeBSD/PAO2 repository
1999-11-29 12:40:59 +00:00
nisimura
558c978dea
Const poisoning.
1999-11-29 07:50:54 +00:00
jun
9c0f37b416
regen.
1999-11-29 02:28:55 +00:00
jun
dd7b5aed5b
Support for TDK LAC-CF010
...
by Ichiro Fukuhara (ichiro@ichiro.org ) on kern/8900
ichiro test TDK CF Card on Opensource matsuri,tokyo and send patch to us.
thanx.
1999-11-29 02:28:19 +00:00
augustss
18f862c072
More USB_DEBUG and DIAGNOSTIC output.
1999-11-28 22:49:53 +00:00
bouyer
0c3ecf8e5e
Improve Ultra/66 support now that I've got some docs from Promise.
1999-11-28 20:05:18 +00:00
bouyer
7bd006b847
Improve a few debug messages.
1999-11-28 20:04:22 +00:00
scw
54f42f17fc
Don't bother spinning in the console 'putc' routine for the transmitter
...
to become idle; it actually doesn't matter as the chip takes care of
this for us. It would also spin endlessly in certain circumstances
during shutdown.
While I'm here, (finally) add code to allow sending BREAK characters.
1999-11-28 12:23:18 +00:00
castor
df56622ada
regen
1999-11-27 09:02:22 +00:00
castor
3de779c46a
Add support for CS4235 codec as found on Intel KU440EX motherboard.
1999-11-27 09:02:13 +00:00
soren
6f6045c97d
Regen.
1999-11-27 01:03:33 +00:00
soren
8c5ab0744f
IBM cards update.
1999-11-27 01:03:18 +00:00
soren
506836faa1
Regen.
1999-11-26 17:17:21 +00:00
soren
71f7530292
Add two 3Com modems.
1999-11-26 17:16:53 +00:00
bouyer
8f56b89950
More WDCDEBUG_PRINT.
1999-11-26 12:39:43 +00:00
augustss
97fc004770
Don't complain when umodemstartread() returns USBD_IN_PROGRESS. It's normal.
1999-11-26 09:12:50 +00:00
augustss
d94a5b55fb
Make timeout device exploration optional in debug mode.
1999-11-26 01:41:03 +00:00
augustss
77bb4d8ce2
Cosmetic change.
1999-11-26 01:40:01 +00:00
augustss
aa32088c20
Cosmetic changes.
1999-11-26 01:39:27 +00:00
augustss
240991073c
Generate an error message when attachment fails.
1999-11-26 01:38:40 +00:00
augustss
961d4d6ad2
Change CS4297 id entry.
1999-11-24 23:21:01 +00:00
augustss
df60fd6eac
Regen.
1999-11-24 23:18:07 +00:00
augustss
ae1dcc2dc0
Comment out some entries for Entrega serial adapters. These entries
...
are only relevant before firmware download.
1999-11-24 23:17:27 +00:00
augustss
c156651eb9
Avoid the special when disconnecting devices with no config descriptor.
...
It was wrong.
1999-11-24 23:14:39 +00:00
augustss
bb2a9b3008
Add some more debug printing.
1999-11-24 23:13:19 +00:00
augustss
881d3f4735
A little cosmetic.
1999-11-23 20:36:10 +00:00
augustss
2e175b3f88
Avoid 0 blocksize.
1999-11-23 08:38:30 +00:00
scottr
d617933e27
Round out our options with 4bpp framebuffer support, conditional
...
on RCONS_4BPP.
1999-11-23 01:52:52 +00:00
augustss
17971be39a
Don't used extern on uhcidebug and ohidebug variables.
1999-11-22 21:57:09 +00:00
sommerfeld
17d170b1ca
defopt COM_DEBUG, COM_HAYESP, and COM16650
1999-11-22 03:53:38 +00:00
pk
d5a471ccc9
Check presence of Sbus interrupt properties before using them.
...
Only one case is known to trigger this omission: a Sparc Classic
configured as X terminal.
1999-11-21 15:01:50 +00:00
takemura
cad52c9e08
Add a entry for Mobile Dock 2, which is 2.5" HDD adapter.
1999-11-21 10:13:08 +00:00
jtk
a65648a323
regen
1999-11-20 18:32:31 +00:00
jtk
35b90fb812
add Xircom CE3 10/100 Ethernet
1999-11-20 18:32:08 +00:00
nisimura
40f7514028
Introduce wscons vsxxx mice (and possible tablet) routines; changes
...
of existing codes (lk201_ws.c, zskbd.c, and zsms.c) will follow.
1999-11-20 04:55:30 +00:00
augustss
f73590bbf0
Print the PnP id of unknown codecs.
1999-11-20 01:16:15 +00:00
augustss
14896709bf
Join two lines in the attach message.
1999-11-20 01:15:25 +00:00
augustss
7b92ed07bd
Propagate the USB revision number to the usb driver.
1999-11-20 00:57:08 +00:00
thorpej
7479d29f00
Make the ThunderLAN and VIA Rhine drivers use the common MII bit-bang module.
1999-11-19 18:27:18 +00:00
thorpej
f1ba0d46a3
Regen.
1999-11-19 18:26:22 +00:00
thorpej
55495ae2e9
Add OUI for Enable Semiconductor.
1999-11-19 18:26:09 +00:00
thorpej
0c3eefb6a5
Add a basic CardBus front-end for the `tlp' driver. Still more work to do.
1999-11-19 18:23:35 +00:00
thorpej
9ed17102f4
- Use the common MII bit-bang module.
...
- Add support other than 128-byte SROMs.
- Add support for the 21142/21143 MII.
1999-11-19 18:22:42 +00:00
thorpej
dc5a586c1c
Use the common MII bit-bang module.
1999-11-19 18:17:14 +00:00
joda
d7496546b5
try to do a better job of figuring out the EEPROM size; the old code
...
didn't work on (some?) 557-based cards
1999-11-19 15:19:14 +00:00
bouyer
3a220103e8
Adapt printf format for 64bit stats counters.
1999-11-19 10:42:48 +00:00
augustss
3386c68b46
Cosmetic changes and some small improvements. From FreeBSD and Nick Hibma.
1999-11-18 23:32:25 +00:00
joda
b578473fae
include dev/cardbus/cardbusdevs.h
1999-11-18 16:57:41 +00:00