be6fe10ee6
get back to looking at config flags
1999-12-20 00:33:17 +00:00
edf809c8b6
Dual LVD (1280) support.
1999-12-16 05:35:42 +00:00
e5835e36c3
request/response queues now indexed via u_int16_t. Add back in f/w inclusion
...
and clean up it's compilation. get chip rev out of pci header.
1999-12-04 02:54:54 +00:00
44c603dd7b
Remove reference to loadable f/w.
1999-10-28 16:11:19 +00:00
cdad48e3b7
Oops- missed a MAXISPREQUEST sized thing- these are all gone now. It's amazing
...
this didn't eat me.
1999-10-17 02:40:26 +00:00
2b4cd26aa4
stylistic cleanups
1999-10-17 01:22:08 +00:00
83bb47c85a
F/W version no longer relevant. Only do WWN seed for FC cards.
...
Now we malloc xflist and dma maps in mailbox setup routines.
We also do the appropriate endian swizzling at the end of a dma
map routine.
1999-10-14 02:14:35 +00:00
63b8530b4e
Update for SCSPI changes.
1999-09-30 23:04:39 +00:00
3bb408eb05
Change to approved NASA/Ames copyright. Add in Qlogic 2200 support.
1999-07-05 20:28:11 +00:00
61bf929d14
Do a fairly large internal restructuring to accomodate dual-bus host adapters
...
(e.g., the 1240). Include the new 1080/1240 NVRAM layout reading code. Some
moderately significant mailbox changes were necessary also to accomodate a
second channel.
1999-05-12 18:59:23 +00:00
eebeea5b23
Read the board revision and trim cache line size back from 16 to 1
...
for early revision 2100 boards. Make sure to turn ROM off for these
boards.
1999-04-04 01:14:58 +00:00
e50460f5fa
Oops- if you enable 1080 support, remember to load the f/w
1999-03-27 01:08:59 +00:00
99d46bf762
add isp1080 support and some basic PDB change stuff
1999-03-26 22:39:44 +00:00
d596b20f1e
prototype 1080/1240 support
1999-03-17 06:16:42 +00:00
c47d6855db
clean up pci configuration a bit
1999-02-09 00:35:35 +00:00
1ece20c808
roll internal release tag
1999-01-30 07:08:04 +00:00
4401c8bdd7
oops. Forgot to turn on PCI burst.
1999-01-10 03:41:47 +00:00
8ac99457db
I mean *really* clean up headers
1998-12-28 19:12:04 +00:00
b51e3fbf3c
clean up headers; remove early revision 2100 workarounds
1998-12-28 19:11:32 +00:00
6d8a22890e
dma setup now returns CMD_QUEUED or CMD_COMPLETE. Clarify a ternary
...
operation that needed some parentheses.
1998-09-17 23:10:20 +00:00
9b29429984
Remove clocks as common code now can determine what clock rates to use.
...
Remove other than 8 byte bursts- until we clarify whether or not buggy
PCI implementatiosn really cause problems.
1998-09-08 07:16:46 +00:00
5ad5bb35af
minor change to make the message less linux like
1998-08-12 00:03:23 +00:00
dcfe0e1506
Back out part of previous; it is perfectly reasonable, and desirable, to
...
print out debugging info ifdef DEBUG.
1998-07-31 02:14:40 +00:00
bec14b0ce3
Part A (Cosmetic nonsense):
...
>We're not Linux. If we still want driver version strings to be displayed
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
Part B:
Field interrupts in OS layer so that (in this OS) bus_dmamap_sync(POSTREAD)
can (formally) ensure that the result queue is stable wrt to buffering
and that for sending a command a bus_dmamap_sync(PREWRITE) is done to
ensure that the device gets a good view of what the mailbox contents
should be.
1998-07-31 02:08:16 +00:00
d8e4026492
Oops, unused variable warning.
1998-07-20 21:17:30 +00:00
74fc0579eb
We're not Linux. If we still want driver version strings to be displayed
...
at boot, then I suppose DEBUG is a reasonable compromise.
1998-07-20 21:16:52 +00:00
1aa702b8f8
fix bogus initialization
1998-07-18 21:04:22 +00:00
99ff11f6b7
locking now out of main framework for isp_reset/isp_init
1998-07-18 21:02:06 +00:00
afb0e1b693
no framework
1998-07-15 19:53:57 +00:00
ea3a1d9c44
Nuke __BROKEN_INDIRECT_CONFIG.
1998-06-08 06:55:54 +00:00
8abe76d2f0
Add offset and length parameters to bus_dmamap_sync(), used for specifiying
...
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
296d96f42c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:38:50 +00:00
18430b4e5e
For the 2100- the flags weren't quite right- but things worked anyway. Wierd.
1997-09-10 02:16:13 +00:00
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
24add65376
Major rework to support Qlogic ISP2100 (Fibre Channel PCI card). Also now
...
able to read SXP registers (instead of panicing). Probably have done a bit
of setup overkill- we now alloc some scratch memory for the 2100 that I thought
I would need for the Port database, but so far I haven't needed to retrieve
the port database. Well, early days yet.
1997-08-16 00:28:10 +00:00
e962c12a08
Fix pasto: sbus -> pci
1997-06-08 22:15:34 +00:00
159c685a42
- Update for changes to core ISP driver.
...
- Convert to use bus dma, greatly simplifying DMA setup.
1997-06-08 06:34:52 +00:00
36949596f0
rename pci_map_register to pci_mapreg_map. The latter name is more
...
descriptive, and allows for a sane name for a function which just digs
the info out of the mapping register but doesn't do the mapping.
1997-04-13 20:14:20 +00:00
cf2d73f749
use pci_map_register(). map both mem and I/O spaces, preferring mem
...
space if it's usable, but falling back to I/O space if mem isn't usable.
1997-04-13 19:48:16 +00:00
0d321a7e29
Add 60 (MHz) value for PCI clock frequency value. Also enable DMA bursting.
1997-04-05 02:55:28 +00:00
d26286ab6b
clean up (unify) the register mapping code a bit
1997-03-28 22:25:01 +00:00
874e7169a4
punt pci_mem_find's &cacheable arg, and pass NULL instead. We never
...
want to map the memory register cacheable.
1997-03-28 22:16:06 +00:00
359850c818
clean up isp_pci_prefer_io comment
1997-03-28 21:51:51 +00:00
cd0461fbb8
map either via memory or I/O space, depending on the setting of a
...
patchable kernel variable. eventually, it might make sense to turn
this into a driver flag or something.
1997-03-16 00:37:00 +00:00
e36a5ca4de
change microcode array definitions from "unsigned short" to the more
...
correct u_int16_t, and remove bogus casts that the old definition
required.
1997-03-13 04:07:44 +00:00
919efaeb60
Make the microcode table const.
1997-03-13 03:33:03 +00:00
5f0d034532
include <vm/vm.h> for vtophys() on x86. kill extra <sys/kernel.h> incl.
1997-03-13 01:56:06 +00:00
cf26d31ad2
NetBSD RCS ID tweaks, a few comment block tweaks. Also, make copyright
...
notices consistent (per Matt Jacob).
1997-03-12 21:06:41 +00:00
099e30a322
ISP 10x0 driver from Matthew Jacob of NASA Ames Research Center.
...
(March 12, 1997 version).
1997-03-12 20:44:50 +00:00
mjacob