629336e5c6
Regen.
2002-12-26 01:52:00 +00:00
d06eca3d63
Add some more BCM570x variants.
2002-12-26 01:51:27 +00:00
89143201f7
add db_dump_itlb.
2002-12-25 22:24:56 +00:00
70bd8bf51e
new function dump_itlb.
2002-12-25 22:05:10 +00:00
d379f66da8
update to post gehenna-devsw world
2002-12-25 17:31:53 +00:00
bd1114bc8e
fix RCS Id
2002-12-25 17:23:22 +00:00
501da0e586
In do not call pppoe_abort_connect if we fail to send the initial PADI
...
packet - there is nothing to abort.
In pppoe_abort_connect rearange state handling slightly to avoid calls
to the PPP LCP state machine get into an infinite recursion.
This should fix the symptoms of PR kern/19500, but does not touch the
real cause for the lossage described there.
2002-12-25 11:54:33 +00:00
6973160773
count input/output bytes for tun device
...
Problem reported and patch provided in PR kern/19554 by Michael van Elst
2002-12-25 08:40:20 +00:00
a80733a697
fix typo in QE_CR_STAT_BITS - bit indication for EDEFER was wrong
...
Reported in kern/19557 by Ron Roskens
2002-12-25 08:24:30 +00:00
c3e4f1d795
Fix broken programming of VSCALE_HI registers in yuv422_prog.
2002-12-25 06:40:27 +00:00
7eb93bf41f
Consistently use BKTR_GEN_IRQ and BKTR_RESYNC instead of numbers.
...
Also, do some whitespace cleanup.
2002-12-25 06:20:11 +00:00
0c6bdb0df1
Merge FreeBSD rev.1.122:
...
Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.
2002-12-25 06:16:58 +00:00
dc403d4519
Bootstrap messages are not for the kernel, they are for mach_init.
2002-12-24 16:40:46 +00:00
b2a7ace594
Better error reporting in mach_msg_trap: this system call does not use the
...
standard error codes.
2002-12-24 15:54:26 +00:00
4d3d28af57
cosmetic
2002-12-24 15:53:46 +00:00
2837b28251
If the chip is in byte access mode for system bus, we should set
...
FE_D6_SBW_BYTE, not clearing FE_D6_SBW_WORD (which is zero).
Pointed out by Christian Groessler.
2002-12-24 13:10:26 +00:00
93b65fbd1d
regen
2002-12-24 12:29:28 +00:00
185383e0a7
Typo
2002-12-24 12:29:06 +00:00
41bfbd28fe
On Darwin, mach_init is the system bootstrap process. It is responsible
...
for forking the traditional UNIX init(8) and it does the Mach port naming
service. We need mach_init for the naming service, but unfortunately, it
will only act as such if its PID is 1. We introduce a sysctl
(emul.darwin.init_pid) to fool a given process into thinking its PID is 1.
That way we can get mach_init into behaving as the name server.
Typical use:
/sbin/sysctl -w emul.darwin.init_pid=$$ ; exec /emul/darwin/sbin/mach_init
2002-12-24 12:15:45 +00:00
c075c4d7f5
Get less debug output
2002-12-24 12:13:15 +00:00
580c60b346
When scanning HP keyboard, disable output on all scan lines except the
...
one we are currently scanning. This is what Hitachi's sample WinCE
code does. Thanks to YAEGASHI Takeshi for pointing this out!
This makes same row chords work properly, most importantly
Ctrl-@, Ctrl-W, Ctrl-S, Ctrl-Alt-F1 (ctrl row), Ctrl-Alt-F3 (alt row).
2002-12-24 11:49:03 +00:00
94f0c1c2d1
emuxki_intr(): return 1 if interrupt was for us, 0 if not
...
this appear to fix occassional sample repeats on my dual CPU i386
2002-12-24 10:53:03 +00:00
6641019152
add cd9660 subdirectory
2002-12-24 08:12:15 +00:00
fa8f4c27d5
isofs dir will be empty after update -dP, now that all contents are in
...
the Attic. Make clean was broken for me without this.
2002-12-24 02:56:10 +00:00
87a74ecee8
Use crimereg.h definitions for the crime dog. Also, move watchdog
...
disable down the very last possible place in cpu_reboot.
from Chris Sekiya
2002-12-23 21:04:23 +00:00
8ecf5692ac
add bus_space_vaddr()
...
from rafal
2002-12-23 20:41:47 +00:00
0dd7013e7a
MACE register definitions
...
from Chris Sekiya
2002-12-23 20:05:06 +00:00
b31b740c2b
CRIME register definitions
...
from Chris Sekiya
2002-12-23 20:04:22 +00:00
1fcaee0848
add debug printf
...
from Rafal
2002-12-23 19:49:27 +00:00
2f32342d20
also create boot.ip32 with the entry point set to the IP32 load address
...
from Chris Sekiya
2002-12-23 19:31:24 +00:00
fb83173bb6
add some ethernet interfaces
...
from Chris Sekiya
2002-12-23 19:18:34 +00:00
3a8872dee7
move cd9660 filesystem code from sys/isofs/cd9660 to sys/fs/cd9660
2002-12-23 17:52:02 +00:00
5d0e84b25e
flatten the LKM vfs hierarchy a bit - no need for isofs/cd9660, put
...
the LKM code directly to cd9660 directory
2002-12-23 17:45:14 +00:00
9accf4df15
move NTFS code from sys/ntfs to sys/fs/ntfs
2002-12-23 17:38:19 +00:00
5356de155a
move filecorefs code from sys/filecorefs to sys/fs/filecorefs
2002-12-23 17:30:36 +00:00
829bd3c01c
adosfs moved from sys/adosfs to sys/fs/adosfs
2002-12-23 17:23:13 +00:00
8974c3cf90
move adosfs files from sys/adosfs to sys/fs/adosfs
2002-12-23 17:15:20 +00:00
fa3da541f9
update for added ktrsyscall() argument
...
XXX this should probably be converted to use trace_enter()/trace_exit(),
XXX the current code doesn't support systrace
2002-12-23 16:26:13 +00:00
f8055a350c
* Use correct PC value for displaying the called function.
...
* Merge code to display non-kernel frames.
2002-12-23 13:21:10 +00:00
095017c9ef
Add quirk. From kern/19499, Werner Backes.
2002-12-23 12:42:53 +00:00
09b10d25e0
Regen.
2002-12-23 12:40:03 +00:00
cb1f48b543
Add SIIG MULTOCARDREADER. From kern/19499
2002-12-23 12:39:36 +00:00
1bfd32c4f3
Fix pasto in comment.
2002-12-23 09:59:25 +00:00
f9fdb92c0f
Always print the device name first in epic_pci_attach().
2002-12-23 03:57:03 +00:00
fe708bb3ae
Set PCI_PMCSR more properly.
2002-12-23 03:23:00 +00:00
ee29810638
Save PCI_PMCSR value correctly.
2002-12-23 03:06:39 +00:00
238efe4697
Replace magic numbers for power management control with PCI_PMCSR* macros.
...
XXX Should we use pci_get_powerstate() and pci_set_powerstate() in pci.c?
2002-12-23 02:58:36 +00:00
b22b6283f3
Sync with if_rtk_pci.c:
...
- Fix typo in printf message.
- Don't use PCI_PRODUCT_DELTA_8139 (0x1360) for args of cardbus_conf_read()
and cardbus_conf_write(); use CARDBUS_INTERRUPT_REG (0x3c) instead.
2002-12-23 02:19:22 +00:00
b4354edb93
Don't use PCI_PRODUCT_DELTA_8139 (0x1360) for args of pci_conf_read() and
...
pci_conf_write(); use PCI_INTERRUPT_REG (0x3c) instead. (How does it work?)
2002-12-23 02:12:49 +00:00
199ad243a0
Fix typo in printf message.
2002-12-23 01:58:26 +00:00
matt