- Make get_props() return AUDIO_PROP_{PLAYBACK,CAPTURE} properly.
This eliminates need for audio.c to take care of such (old)
drivers which don't return both of PLAYBACK and CAPTURE.
- All get_props() doesn't need to return AUDIO_PROP_MMAP.
It is handled in the audio layer now.
- Interrupt-oriented system rather than thread-oriented.
- Improve stability, quality and performance.
- Split playback and record cleanly. Improve halfduplex support.
- Many bugs are fixed including deadlocks, resource leaks, abuses, etc.
- Simplify audio filter mechanism. The encoding/channels/frequency
conversions are completely handled in the upper layer. So the hard-
ware driver only converts its hardware encoding (if necessary).
- audio_hw_if changes:
- Obsoletes query_encoding and add query_format instead.
- Obsoletes set_params and add set_format instead.
- Remove drain, setfd, mappage.
- The call sequences are changed.
- ioctl AUDIO_GETFD/SETFD, AUDIO_GETCHAN/SETCHAN are obsoleted.
- ioctl AUDIO_{QUERY,GET,SET}FORMAT are introduced.
- cleanup config attributes: au*conv and mulaw.
- All hardware drivers should follow it (I've done as much as possible).
Some file paths are changed:
- dev/audio.c -> dev/audio/audio.c (rewritten)
- dev/audiovar.h -> dev/audio/audiovar.h
- dev/audio_dai.h -> dev/audio/audio_dai.h
- dev/audio_if.h -> dev/audio/audio_if.h
- dev/audiobell.c -> dev/audio/audiobell.c
- dev/audiobellvar.h -> dev/audio/audiobellvar.h
- dev/mulaw.[ch] -> dev/audio/mulaw.[ch] + dev/audio/alaw.c
the original ad-audiomp branch notes:
Add MP locking to the audio drivers.
Making the audio drivers MP safe is necessary before efforts
can be made to make the VM system MP safe.
The are two locks per device instance, an ISR lock and
a character device lock. The ISR lock replaces calls to
splaudio()/splx(), and will be held across calls to device
methods which were called at splaudio() before (e.g.
trigger_output). The character device lock is held across
calls to nearly all of the methods, excluding some only
used for initialization, e.g. get_locks.
Welcome to 5.99.57.
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
by the isa.c bus driver and the "address/whatever not specified"
argument passed to leaf device drivers.
The former is "ISACF_XXX_DEFAULT" as generaterd by config(8), the latter
"ISA_UNKNOWN_XXX", defined in isavar.h.
This way we save a dependency of every ISA device driver on "locators.h".
isa_dmamap_create() calls to their open/close entrypoints. This worked
with some luck, but broke on i386 when _bus_dmamap_create started
to allocate bounce buffers upfront, since memory below 16M may well
not be available when the sound devices is opened for the Nth time.
To fix this, create a new simple interface, isa_drq_alloc/isa_drq_free,
wrappers around already existing bitmask macros. These are expected
to be used before an isa_dmamap_create call, and after an
isa_dmamap_destroy call, respectively. For the sb and ad1848 drivers,
they're deferred until open/close.
All isa_dmamap_create calls can now use BUS_DMA_ALLOCNOW and be done
at attach time.
configuration of devices logically attached to the ISA bus:
* Change the isa_attach_args to have arrays of io, mem, irq, drq
resources.
* Add a "pnpnames" and a linked list of "pnpcompatnames" to the
isa_attach_args. If either of these members are non-NULL,
direct configuration of the bus is being performed. Add an
ISA_DIRECT_CONFIG() macro to test for this.
* Drivers are not allowed to modify the isa_attach_args unless
direct configuration is not being performed and the probe fucntion
is returning success.
* Adapt device drivers -- currently, all driver probe routines return
"no match" if ISA_DIRECT_CONFIG() evaluates to true.
isaki