87345845e1
Make mhzc_alloc_ethernet search the right address range.
...
Fixes: kern/11451.
Reviewed by: thorpej
2001-07-01 02:16:25 +00:00
52f5073f28
Jumbo patch:
...
- data alignment fix
- kludge around broken multicast by using promisc mode
(IPv6 router solicitation now works)
- add support as random source
- support device power-up and power-down
- vlan support
- misc. comment and style fixes
2001-07-01 01:57:29 +00:00
a48df4b355
Garbage-collect unneeded rnd.h include.
2001-07-01 01:50:05 +00:00
4f9dcdfb8a
Split the receive interrupt handler into two versions, one for the
...
SiS900/DP83815, one for the DP83820. In preparation for changes
to the DP83820 version for handling jumbo Ethernet frames.
2001-06-30 22:35:05 +00:00
29dc8fc7e3
Install "dev/tc/sfbreg.h" which is required for building the Alpha X11
...
server.
2001-06-30 21:16:52 +00:00
8d829065a6
IFM_1000_TX -> IFM_1000_T, as (breifly) discussed on tech-net.
2001-06-30 17:53:58 +00:00
4e30120ef0
Sync the Tx descriptors pre- and post- on the Tigon 2.
2001-06-30 17:02:54 +00:00
f1ea6f5be0
When we're done setting up the General Information Block, sync it.
...
Sync the NIC-maintained stats structure as appropriate, as well.
2001-06-30 16:34:59 +00:00
c05a96f530
Add macros to sync the various bits of the DMA'd control data.
2001-06-30 15:57:58 +00:00
d2a3ac835c
Use macros (like those in every other network driver I have written)
...
to compute the offset of a structure in the DMA'd control data, and
the DMA address of that structure.
2001-06-30 15:39:51 +00:00
83b199c106
Split the tx-end-of-frame routine into Tigon 1 and Tigon 2 verions,
...
for the same reason we split the tx encap routine.
2001-06-30 14:56:59 +00:00
ee9c81dd38
Split the transmit encap routine into two versions: one for the Tigon 1
...
and another for the Tigon 2. This eliminates a conditional in the
loop around the DMA segments, and will make further cleanup easier.
2001-06-30 14:47:23 +00:00
291a21d3fb
Move the `ti_tx_ring_nic' pointer out of the ring-data structure
...
and into the softc. Garbage-collect the `ti_cmd_ring' pointer,
since bus_space is properly used to access the command ring.
2001-06-30 14:16:55 +00:00
6237e487ab
When a transmit is complete, sync (and unload!!) the DMA map used
...
for the packet. When setting up a packet for transmit, sync the
DMA map being used.
2001-06-30 05:48:24 +00:00
17238bfd2b
Move the Tigon/Tigon2 firmware, version 12.4.13+wpaul, to a
...
more appropriate location.
2001-06-30 04:33:11 +00:00
2642760b40
Update for D-Link ST201 change.
2001-06-30 01:05:25 +00:00
cdfa27aeeb
Regen.
2001-06-30 01:04:25 +00:00
9556d5b2f9
Change the DLINK ST-201 entry, add more Sundance/DLINK Gig-E
...
products.
2001-06-30 01:03:59 +00:00
f6bce1a60b
Correct spelling of media in the product names.
2001-06-29 23:58:08 +00:00
abda6184c0
In the `copy small' path, make sure to align the payload.
2001-06-29 23:36:03 +00:00
3fc5f5722d
Fixes to make if_fw work:
...
- fwohci_arrq_input: Do not return if next packet is in the buffer,
or the next packet cannot be received until the next receive interrupt.
- fwohci_uid_collect: XXX change M_WAITOK to M_NOWAIT for now, since there is
no lock but only one instance must be allowed here.
split fwohci_uid_req() and retry to get uid.
XXX need timer to wait some moment between retries...
- Add DELAY(10) for wait loop.
- split fwohci_buf_stop() into _stop_tx() and _stop_rx() because receiver
should not be stopped at bus-reset.
- split fwohci_buf_input() into _input() and _input_ppb() to improve
performance slightly.
2001-06-29 14:57:24 +00:00
d136cfe99e
regen
2001-06-29 14:57:17 +00:00
8b753a3651
PR/13337: de SAINT LEGER Rodolphe: Add support for the cn40bc ne clone.
2001-06-29 14:56:21 +00:00
8601a37f8c
Protect to call fw_start() recursively.
2001-06-29 14:46:54 +00:00
5cf8e98cb5
Experimental support for LEAP, which is cisco's implementation of IEEE802.11
...
EAP in aironet firmware. Currently it seems that only cisco's RADIUS server
implements EAP for IEEE802.11, and the function is not tested at all.
2001-06-29 11:24:42 +00:00
4b9b2bd56c
Add some additional values to the keyvalue list from draft specs as some roms are using these and it would be nice to be able to identify them
2001-06-29 04:52:35 +00:00
c025feaea0
Add iha(4)
2001-06-28 15:46:00 +00:00
e88b10865c
simplify and localize to access sc_intmask in fwohci_event_thread().
2001-06-28 14:41:28 +00:00
3ad99107cb
Simplify to update sc_intmask in fwohci_intr().
2001-06-28 14:38:56 +00:00
a0eef76f35
FW_DEBUG: split debug printf in fwohci_intr() and fwohci_phy_input() into
...
fwohci_show_intr() and fwohci_show_phypkt() respectively.
2001-06-28 14:37:56 +00:00
e7e0a9984c
Do not re-enable the driver after resume if the interface is marked down.
...
Change the first argument of awi_init/awi_stop from struct awi_softc to
struct ifnet to match the definition if_init/if_stop, though we don't
use ether_ioctl() yet.
2001-06-28 10:40:04 +00:00
950ec87b20
Do not re-enable after resume if interface is marked down.
2001-06-28 10:34:17 +00:00
46e1a51e62
Add Tamarack Microelectronics, Inc. vendor ID, and product ID for
...
Tamarack TC9021 Gigabit Ethernet.
2001-06-28 04:45:09 +00:00
f54fe9f3b1
compile tweak for non-SCSIVERBOSE
2001-06-27 23:14:26 +00:00
67bde7ddf3
The back end driver doesn't need PCMCIA headers, but it does need
...
<machine/bus.h>.
2001-06-27 22:22:12 +00:00
ebaac3f1e0
Don't define Debugger() if it's already defined.
...
It is always defined on the sun[23].
2001-06-27 20:17:20 +00:00
1cf0b6f4ec
Added many sun2 entries.
2001-06-27 19:47:17 +00:00
656bb8c5c7
added Solidum PAX.ware 1100 and Lucent ORCA PCI targets
2001-06-27 17:57:23 +00:00
db6d5fc4a7
When setting/changing an address, no need to call ti_init() if the interface
...
is already up.
Especially this allow netatalk to start properly on a ti interface.
2001-06-27 16:47:33 +00:00
46a9744df4
enabling EMTAC A2424i Wavelan Card
...
It work fine.
2001-06-27 16:03:01 +00:00
6a91469e6d
Some ATAPI CD occasionally reports "ATA illegal indication length" for
...
a request sense command, but the sense is properly transfered anyway.
Ignore the error for this case.
2001-06-27 13:22:36 +00:00
4fadc33006
Better diagnostic when a REQUEST SENSE is terminated with CHECK CONDITION.
2001-06-27 13:21:30 +00:00
770912bb85
Add support for handling full-size 802.1Q packets.
2001-06-26 22:00:44 +00:00
90d0e67408
Add a XS_CTL_SILENT_NODEV flag: if the sense info is "not ready, medium
...
not present" don't print any message but still return ENODEV.
Use this in cd driver to allow open of character raw partition even if
the drive is empty (older drives fails at LOAD_UNLOAD time, newer
ones fail at TEST_UNIT_READY time).
2001-06-26 15:32:02 +00:00
f47d097cf5
Make it compile with SCSIPI_DEBUG
2001-06-26 12:46:56 +00:00
e27abfaddf
Make it compile with SCSIPI_DEBUG
2001-06-26 12:19:49 +00:00
65f0069f5b
restore awi_power() to reenable awi after resume.
...
... forgot why it is disabled...
2001-06-26 08:41:19 +00:00
3e2b22f383
Fix keyid bit position of encrypted packet to make non-first key usable.
2001-06-25 12:11:59 +00:00
4fe2f5eda7
AWI_DEBUG only:
...
awi_dump_pkt dumps packet before encryption in transmit.
2001-06-25 12:09:51 +00:00
b383383c20
Fix capability information in association request to reflect ESS/IBSS mode.
...
This fix is required to interoperate with Cisco's access point.
2001-06-25 12:06:14 +00:00
27a2f91b72
Add sc_flags to seeq8005_softc, and put a flag in it.
2001-06-25 11:38:28 +00:00
98f7903dd8
Don't reprogram SCC registers unless the values have changed.
...
Some CMOS Z85C30 SCC's (as used in the SGI Indy and Mips Magnum 3000's)
reset the baud rate generator when a new prescaler is loaded - despite
what is documented in the datasheet.
Avoids "character glitch" problems when line discipline characteristics
are changed at the start of the login process, or during a ftp session
on the /dev/console device.
Tested on -sgimips, -mipsco and -alpha platforms
2001-06-25 08:30:11 +00:00
ffd45d10e3
Invert the logic in last commit so that it actually works.
2001-06-25 06:44:41 +00:00
d38786d61f
fix printf to DPRINTFN inside FW_DEBUG
2001-06-25 04:52:26 +00:00
33fb36075d
Add a flag to the softc to prevent recursion in ifstart
2001-06-25 04:46:28 +00:00
a9f2f7b41b
add stubs for wiconfig(8).
2001-06-25 04:43:33 +00:00
1761d48452
cleanup unnecessary include files.
2001-06-25 04:29:19 +00:00
fda9cb9936
Avoid unused variables if RASTERCONS_FULLSCREEN is defined. (see PR#13231)
2001-06-24 15:47:45 +00:00
15223234d7
Fix some typos in comments.
2001-06-24 10:18:13 +00:00
e2f7c01bbd
This was able to crash my new alpha consistently when I started X.
2001-06-24 01:11:08 +00:00
abfd1d9e70
ea_mc_reset_8004(): Rather than doing the CRC32 ourselves, call
...
ether_crc32_be() to do it for us.
2001-06-23 17:32:21 +00:00
3177727ba7
Fix bogons in previous commit:
...
* Remove harmful debugging code from seeq8005_attach().
* Re-insert variable declarations in ea_mc_reset_8004(), since they aren't
dead yet.
2001-06-23 13:40:35 +00:00
9e396bc385
Attampt support for 8-bit mode. I believe this should work, but I need a more
...
flexible bus_space on arm26 before I can test it.
2001-06-22 20:31:55 +00:00
90b62cfa61
Don't include <machine/autoconf.h>, which should not be necessary.
...
Moreover, hpcarm doesn't have such a header file.
2001-06-22 14:38:44 +00:00
2ab206fbb5
Update, based on i8259a manual.
2001-06-21 18:57:04 +00:00
b1a2f97303
Also print DSA addr in a DIAGNOSTING printf.
2001-06-21 16:55:20 +00:00
8a46c28bc6
Proper media support for Compaq Deskpro 4000. PR kern/13244 from
...
Andrew Gillham.
2001-06-21 16:33:33 +00:00
b5e1e7d8ab
add #include <net/if_ieee80211.h> to make it compilable.
2001-06-21 14:02:56 +00:00
ea8bda451f
Add support for persistent key.
...
Fix promiscuous mode, taken from FreeBSD.
Fix to re-enable the card after suspend/resume.
Reflect current operational rate to if_media interface.
Avoid duplicate copy in transmit.
Move most of debug printfs into IFF_DEBUG.
Disable ANCACHE - designed for IPv4 only and no one use it.
Add IFF_ALLMULTI flags, as we don't have multicast filter.
Convert bzero/bcopy to memset/memcpy.
... sorry for jumbo commit.
2001-06-21 12:49:06 +00:00
0e7b0f3f43
add definitions for LEAP stuff in 350 series.
...
fix the value for AN_802_3_OFFSET to 0x34 (no one uses)
2001-06-21 12:33:24 +00:00
ee9070cc5a
Add a long-needed register descripton file for the i8259 PIC.
...
This was taken from the PIIX4 manual, and thus doesn't have all
the legacy crap (relative to "modern" ISA PICs, anyway), so if
you have a real i8259 manual, fill in some more bits.
2001-06-21 03:43:43 +00:00
bdfad3793f
We don't need to check for raidautoconfig here, so nuke it and
...
clean up a little.
2001-06-21 03:07:04 +00:00
ae2fb7473c
Regen; add/update 3Com 3CR990 products.
2001-06-20 19:52:19 +00:00
8e15530e96
Add more/update existing 3Com 3CR990 product IDs.
2001-06-20 19:51:12 +00:00
08415c62e6
Regen; add SysKonnect SKNET-GE.
2001-06-20 16:33:10 +00:00
70bbf8c3aa
Add SysKonnect SKNET-GE (GEnesis Gigabit Ethernet).
2001-06-20 16:32:32 +00:00
c633f47bfd
Regen.
2001-06-20 05:46:24 +00:00
34fe57df0e
Add O2Micro PCI-{CardBus,PCMCIA} bridges:
...
OZ6729, OZ6730, OZ6832/OZ6833, OZ6860 and OZ6812/OZ6872
2001-06-20 05:44:33 +00:00
f4e59879ce
support Raltek 8139-based Cardbus card
...
reported by Takayoshi Kochi(t-kouchi@mvf.biglobe.ne.jp )
kern/13252: RealTek 8139-based Cardbus support
2001-06-20 05:41:27 +00:00
f03f25cb17
regen
2001-06-20 05:39:36 +00:00
ba3eaf4273
add product RealTek 8139
...
by kern/13252: RealTek 8139-based Cardbus support
2001-06-20 05:39:17 +00:00
76d322c58c
#if out a few more bits that arn't required if we are not doing
...
PQ or RAID6.
2001-06-20 03:09:23 +00:00
35e011d31b
Convert to use cnmagic(9). Unifdef DDB and DDB_BREAK_CHAR.
...
While I'm here, s/ungetc/readahead/ in com_common_* because that's
what it _really_ is, "ungetc" is a very confusing name.
2001-06-20 03:07:25 +00:00
0b0010a7c3
When probing for a PHY, look at the EXTSTAT bit in the BMSR, as well,
...
not just the media mask. This prevents PHYs/TBIs that only support
Gigabit media from slipping through the cracks.
2001-06-20 01:42:41 +00:00
7e843c3ccb
Device driver for the Sundance Tech. ST-201 10/100 Ethernet. This
...
chip is found on the D-Link DFE-550TX.
2001-06-19 23:00:47 +00:00
7914a89b02
Add support for the Seeq 80225 10/100 Ethernet PHY. This is just
...
a stripped-down version of the 80220/80223.
2001-06-19 20:10:54 +00:00
93169d8a94
Regen; added Seeq 80225 10/100 PHY.
2001-06-19 19:51:27 +00:00
5d3c31d576
Add Seeq 80225 10/100 PHY.
2001-06-19 19:51:04 +00:00
ac951736bc
`response', not `responce'
2001-06-19 13:45:52 +00:00
3f9984fc90
`existent', not `existant'
2001-06-19 13:42:07 +00:00
f3f6c5b675
`accessible' only has one `a'.
2001-06-19 12:52:20 +00:00
dd270d4a3f
ifdef NISAPNP -> if NISAPNP > 0
2001-06-19 12:45:23 +00:00
b7f8c7eb86
delint
2001-06-19 10:43:26 +00:00
a8068ab82d
Don't use argument names in function declarations.
2001-06-19 08:24:07 +00:00
a7d6a8f2f1
The ifa is needed for CCITT&&LLC case, provide it in that case
2001-06-19 07:19:35 +00:00
0e8f8213af
A bunch of these bits are only needed for the EVENODD stuff.
...
Shaves a little better than 1K off the size of an i386 kernel.
2001-06-19 03:25:16 +00:00
62224968e1
Add support for the Adaptec AIC-6915 10/100 Ethernet. This is
...
a 64-bit PCI chip, available in 1, 2, and 4 port models.
2001-06-18 22:05:35 +00:00
319ea4a342
make it compilable: delete unused variable 'ifa' from lance_ioctl()
2001-06-18 13:47:18 +00:00
c07d2e1e96
Add Cisco/Aironet 350
...
Reported by Wolfgang Rupprecht <wolfgang@wsrcc.com>.
This doesn't fix PR 13181, which says the card doesn't work well.
2001-06-18 13:21:24 +00:00
e523b2f091
regen: Add Cisco/Aironet 350
2001-06-18 13:19:07 +00:00
61285ac2da
Add Cisco/Aironet 350
2001-06-18 13:18:08 +00:00
e65b619faa
Convert to use ether_ioctl() for SIOCSIFADDR and SIOCSIFFLAGS.
2001-06-18 11:06:26 +00:00
49ed2592ce
Add my copyrigth and remove the older ones. None of the original authors of
...
the st driver wrote something in this file.
2001-06-18 09:41:06 +00:00
0a63f01fef
Snapshot of ATAPI tapes support. Known to be able to read/write to tape with:
...
st0 at atapibus0 drive 1: <Seagate STT8000A, , 5.51> type 1 sequential
removable
Major changes may still happen in order to properly support other ATAPI
tape drives.
2001-06-18 09:05:05 +00:00
1506d21315
Make error checking/reporting a little more correct.
2001-06-18 01:58:08 +00:00
de98ab5b38
Regen.
2001-06-17 19:51:27 +00:00
b63b6d01e6
Add device IDs on the new iBook.
2001-06-17 19:50:33 +00:00
adaaf11f9f
make pckbc_slot_names[], pckbc_portcmd const
2001-06-17 16:15:41 +00:00
4c49d6fa2a
Split the Tx and Rx interrupt routines into separate functions,
...
and add some (optional) event counters.
2001-06-15 22:16:00 +00:00
f71391cb6c
Move the check for successful attachment to earlier in the detach
...
routine, to avoid referencing nonexistent data structures.
2001-06-15 18:05:36 +00:00
ddc6e8e6ad
I've got an 8-bit Ether3, so I've discovered that the address mapping is
...
non-linear. Comment it here so I don't forget.
2001-06-15 00:28:01 +00:00
60a0137d9c
Ooops- we need to allocate an array of pointers to scsipi_xfer structures
...
isp_maxcmds in length- not an array of scsipi_xfer structures isp_maxcmds
in length.
2001-06-14 19:54:07 +00:00
4d51fe368b
change the meaning of ifnet.if_lastchange to meet RFC1573 ifLastChange.
...
follows BSD/OS practice and ucd-snmp code (FreeBSD does it for specific
interfaces only).
was: if_lastchange get updated on every packet transmission/receipt.
now: if_lastchange get updated when IFF_UP is changed.
2001-06-14 05:44:23 +00:00
669f5cc5a5
It's silly to need a parity rebuild after a reconstruction has completed.
...
If we've just reconstructed a disk, then the parity is known to
be correct. (XXX doesn't hold for RAID 6!)
2001-06-14 02:35:56 +00:00
3078a3d26d
It's pretty questionable to printf a PCI tag, but if we're going to
...
do so, at least make the printf compile across the board.
2001-06-14 01:06:56 +00:00
a9d7b546d6
make this work.
2001-06-13 19:02:13 +00:00
bb5ca33de4
Add a driver for the HCCS IDE interface I got at Wakefield. Like the D.T.
...
Software one (dtide), it doesn't generate interrupts, so we run it in polled
mode.
2001-06-13 18:31:43 +00:00
18c4c9eab3
Update to use the new support for IRQ-less IDE controllers.
...
Also generally re-work to do channel attachment in a loop, since that saves on
code size.
2001-06-13 18:29:40 +00:00
6acf237023
Use the new generic mechanism for forcing polling on a SCSI interface, rather
...
than doing it ourselves.
2001-06-13 18:27:27 +00:00
4bc5a3b295
Add explicit support for IDE and SCSI adaptors which don't support interrupts.
...
On such adaptors, all transfers are done in polling mode.
OK'ed by Manuel on tech-kern.
2001-06-13 18:17:38 +00:00
a865af9ad5
Enable attachment for Kingston KNE-PC2 Ethernet.
2001-06-13 13:41:01 +00:00
c03a48d64f
withough -> without
2001-06-13 10:45:57 +00:00
e13606c37b
Workaround for buggy OPTi pciide chipset revisions, as reported
...
in PR/11644.
2001-06-13 09:55:25 +00:00
d9db68b3fe
be more specific about which interlan controller the qbus/if_il supports
2001-06-13 06:40:19 +00:00
6c4e6292a5
Regen; add IBM 405GP PCI Bridge & ROB-in i960RP Microprocessor.
2001-06-13 06:04:25 +00:00
18b2f7e6a1
Add a port to IBM's PPC405GP Reference Board (the "walnut")
...
by Eduardo Horvath and Simon Burge of Wasabi Systems.
IBM 4xx series CPU features:
- New pmap and revised trap handler.
- Support on-chip timers, PCI controller, UARTs
- Framework for on-chip ethernet and watchdog timer.
General PowerPC features:
- Add in-kernel PPC floating point emulation
- New in{,4}_cksum that is between 1.5 and 5 times faster than the
old version depending on CPU type.
General changes:
- Kernel support for generic dbsym-style symbols.
2001-06-13 06:01:44 +00:00
015345c74b
Don't need INET or NS includes here.
2001-06-12 22:32:51 +00:00
9988acd41e
Don't need INET or NS includes here.
2001-06-12 22:28:15 +00:00
e103dbb4b0
Don't need NS-related headers here.
2001-06-12 22:05:53 +00:00
18e8d752f6
No need to pull in INET or NS headers -- that's all done by ether_ioctl() now.
2001-06-12 20:53:39 +00:00
0a600be867
receive, not recieve
2001-06-12 15:17:10 +00:00
2a8c778f1b
retrieve, not retreive
2001-06-12 14:59:27 +00:00
cb6b68a931
Mention where I got the information for writing the driver.
2001-06-12 11:52:03 +00:00
f6f3c9b35f
Add a hefty comment about the stray IR bug, so I don't forget it.
2001-06-12 11:49:18 +00:00
b50f28c38a
underrun, not underun
2001-06-12 11:48:51 +00:00
1f4eee4c21
In wsfont_map_unichar: when checking that 'lo' is within 'map2' range,
...
compare 'lo', not 'hi' (only partially edited cut-n-paste it seems).
2001-06-12 00:57:10 +00:00
33afab3251
Add a short-circuit return from wdcprobe for IDE controllers without pullup
...
resistors, which return the last value written to the bus on a read. This
makes detecting empty channels on my HCCS and D.T. Software IDE interfaces
rather faster.
2001-06-11 21:18:36 +00:00
fb2f3ce7e5
Regen; Add Level One vendor ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:13:49 +00:00
ec5280c1ed
Add Level One product ID, and LXT-1001 10/100/1000 Ethernet
...
product ID.
2001-06-11 21:12:29 +00:00
274629aa08
Added support for the VME `sc' SCSI board. Compiles,
...
but needs testers as the author doesn't actually have
the hardware.
2001-06-11 15:09:54 +00:00
b9e61207ff
Add nolun/nosync quirk for "IBM CDRM00201 !F"
...
See PR#13031.
2001-06-11 13:58:18 +00:00
a2c4938b03
not set HPCFB_SWAP_BYTE
2001-06-11 09:36:44 +00:00
a4401a8e5d
Regen from "pcidevs".
2001-06-11 06:36:51 +00:00
6caf1041cb
Add support for the D-Link DFE-530TX+. Patch supplied by
...
Gabriel Rosenkoetter in PR kern/13161.
2001-06-11 06:36:23 +00:00
40ac848024
Fix various misspellings of compatible/compatibility.
2001-06-11 01:50:48 +00:00
0a3b1c29a1
transceiver, not transciever.
2001-06-11 01:19:53 +00:00
6fee8596c7
Packet includes CRC, so mark it in the mbuf header. Fixes the
...
"discarding oversize frame (len=1518)" problem.
2001-06-10 21:53:08 +00:00
01c6253206
Only use b_proc if B_PHYS is set.
2001-06-10 18:41:27 +00:00
d29b7bb88c
Regen from "usbdevs".
2001-06-10 13:10:46 +00:00
8a6a34f18e
Add Philips PCA646VC PC Camera.
2001-06-10 13:10:25 +00:00
uwe