4553ce553c
use <dev/sbus/sbusvar.h> not <sparc/dev/sbusvar.h>
1999-02-03 06:03:37 +00:00
1f5b9b4d63
sprintf->snprintf
1999-02-03 05:05:03 +00:00
ab8b6f84e3
No, ld.new is actually broken on alpha, so turn it off for now.
1999-02-03 02:14:55 +00:00
04162329d6
Enable ld.new on alpha.
1999-02-03 01:32:53 +00:00
9d8e94a575
Update to 2.9.1.
1999-02-03 01:32:40 +00:00
de35d7228d
fix compiler warning
1999-02-03 01:16:20 +00:00
77dc2e157a
Reorganize, and enable gas.new on arm32.
1999-02-03 01:11:23 +00:00
4a3f8b97da
Re-enable binutils based gprof on Alpha.
1999-02-03 00:52:10 +00:00
6f942f16fd
Add RCS Id as suggested by Rob Windsor in PR bin/6931.
1999-02-03 00:19:00 +00:00
6f9f9c2a10
Re-enable binutils-based gprof for i386, and disable old gprof on i386.
1999-02-03 00:17:35 +00:00
f5abe789ad
Update to 2.9.1.
1999-02-03 00:15:09 +00:00
fb3e11970f
Lost 5 lines in the version that was committed. Re-add them.
1999-02-02 23:42:41 +00:00
6e7077da0a
Uh, when called as "tar" we should still default to "ustar" output, not
...
V7 tar format. Also change meaning of pax-as-tar option "-o" to mean
"use V7 output format" (same as GNU tar's -o).
1999-02-02 23:31:52 +00:00
7f64159fa3
Reenable:
...
- binutils on all architectures (including PowerPC!),
- gdb on i386,
- gas.new on alpha and i386.
1999-02-02 22:48:11 +00:00
4bd6ed2a8b
Make this pass the `strict prototype' test.
1999-02-02 22:23:44 +00:00
942ddff25b
Fix up ELF sources list.
1999-02-02 22:16:57 +00:00
19b7fecf53
Get rid of !powerpc cruft.
1999-02-02 22:05:58 +00:00
34923965e0
Separate the configuration into one per architecture - maintaining hacks
...
for multi-arch config.h is too much trouble. Add skeletons generated from
a './configure --target=' for each architecture.
1999-02-02 22:02:47 +00:00
e6c245c5df
Implement pmap_prefer() for systems w/ an HP MMU (which has a virtually-tagged
...
cache). This helps to avoid cache alias problems, and can improve performance
in the case where physical pages have multiple mappings (since the pages will
not have to be marked cache-inhibited).
1999-02-02 21:06:55 +00:00
3b3908f06f
Update the C++ demangler to one from the egcs 1.2 trunk, dated 19980131.
...
This is a bit more robust than that in egcs 1.1.1, and recognizes more
(but not yet all) template constructions.
1999-02-02 21:00:32 +00:00
f108f0164e
Nuke the "pmapvacflush" debugging code.
1999-02-02 20:52:21 +00:00
939670a527
Re-enable libbfd on all platforms including PowerPC. (Will re-enable
...
individual bfd dependent programs one at a time, as they are verified.)
1999-02-02 20:46:37 +00:00
586a0960e7
Nuke ld testsuite (wasn't updated with 2.9.1, and can be obtained via
...
third party sources)
1999-02-02 20:34:12 +00:00
f226c2f097
Nuke gas testsuite (wasn't updated with 2.9.1, and can be obtained via
...
third party sources)
1999-02-02 20:31:08 +00:00
5accb47df8
It's now called "aout-arm32.c" with a dash.
1999-02-02 20:31:07 +00:00
bdb3f58851
Nuke gas testsuite (wasn't updated with 2.9.1, and can be obtained via
...
third party sources)
1999-02-02 20:30:27 +00:00
7b850c06da
Resolve conflicts and update NetBSD local changes tobinutils 2.9.1.
1999-02-02 20:26:57 +00:00
3677e2d7cb
Update to binutils' bfd 2.9.1.
1999-02-02 20:00:39 +00:00
8befad84b1
Remove SCCS markers and make these compile in $NetBSD$ IDs.
1999-02-02 19:57:30 +00:00
2e8b57510c
By popular demand, import binutils 2.9.1.
1999-02-02 19:51:16 +00:00
269cb58003
Remove the sccs[] hack (which has broken twice now) and just make sccs[]
...
and version[] separate strings. (Other alternative hacks proposed may also
break in the future.) We don't make version a pointer into the sccs string,
because that would require changing programs that kvm_read() it, and break
backward compatability.
1999-02-02 19:40:47 +00:00
13daba04a1
Another giant change: Allocate register space dynamic instead of compiled-in.
...
This is done on a physical page size basis, instead of virtual (as the
(on vax yet non-existing) bus_* routines does). This is similar to the
way uba allocation is done.
1999-02-02 18:37:20 +00:00
16d7798441
Turn off bits of the toolchain from building on a recursive make: binutils,
...
bfd, gas.new, ld.new, gdb, gprof; in anticipation of the binutils-2.9.1
import.
1999-02-02 17:45:02 +00:00
559036da39
Update to current state of pciide. Note support of ISA, ISAPnp and PCMCIA
...
IDE controllers too.
1999-02-02 17:32:27 +00:00
a85206a9c5
Change wd to wdc, and note pciide.
1999-02-02 17:12:00 +00:00
5888b4354e
channel_map is called before setup_chip, so whe need to enable the channel
...
status bits in acer_channel_map().
1999-02-02 17:06:05 +00:00
8dac39d2de
Update supported hardware list to reality, + a few cosmetic changes.
1999-02-02 16:56:54 +00:00
68c9ce2c96
Don't use BAT register. (not needed now.)
1999-02-02 16:48:17 +00:00
a4de4218fd
Use private (its own) segment registers in Open Firmware call,
...
instead of BAT register.
1999-02-02 16:47:08 +00:00
ef69721044
findroot() now recognizes network devices.
1999-02-02 16:37:51 +00:00
378f49eff8
Ensure lowest 256MB is mapped by BAT0.
1999-02-02 16:29:25 +00:00
1123e3e286
Mention pciide(4).
1999-02-02 16:18:17 +00:00
ca240ca7b5
Support for Acerlab M5229 IDE controller. Thanks to Thilo Manske for testing
...
the code, and to Takahiro Kambe who run several tests and finally found the
bug by himself :)
1999-02-02 16:13:59 +00:00
362c3e31c9
The builtin . (dot) command no longer sees the current working directory
...
even if the specified file is not in the PATH.
This change enforces security and makes it conform to POSIX.
Closes PR #6794 .
I thought Christos committed this but not appeared yet. :)
The setstackmark()/popstackmark() pair in dotcmd(), used for freeing
stack storage possibly allocated by find_dot_file(), is redundant for now
since dotcmd() is surrounded by another pair in evalcommand().
This redundancy, however, may help future modifications
(suggested by Christos).
1999-02-02 15:49:52 +00:00
275e4ce247
wscons is default now - replace the "ttyv0" getty by a number of
...
"ttyEn" lines.
Thanks to "Johnny C. Lam" <lamj@stat.cmu.edu> for pointing out.
1999-02-02 14:33:04 +00:00
f41cded075
make dma flushing more efficient and avoid stray interrupts when not using polled io.
...
remove check for normal chaining interrupts and add check for combined chaining interrupts
only when used with a tail chain. This allows scsi to work for short unaligned buffers
and large aligned buffers.
1999-02-02 14:04:53 +00:00
266beeb0be
remove sentence consistenting solely of "When"
1999-02-02 13:35:56 +00:00
0075c51a23
Bump CDRETRIES to 4. Now if a DMA error occurs, the driver should downgrade
...
to PIO mode and the command be retried properly.
1999-02-02 13:02:49 +00:00
c0e7b6c5cb
If sense_key == UNIT_ATTENTION and ASC/ASQ == "Power On, Reset, or Bus Device
...
Reset", retry the command instead of returning an error. XS_RESET is useless
without this, as the retryed command will die with this unit attention.
1999-02-02 13:01:36 +00:00
0c8f3a4f31
Don't use obsolete sgtty crap.
1999-02-02 13:00:19 +00:00
mrg