de108bd82d
Add enable/disable hooks on devices that have ACPI power management
...
capability, using D3 and D0 power states. This saves me quite a bit
of battery when not using the built-in Ethernet on my IBM T-20 during
long IETF meetings.
2001-08-05 23:39:59 +00:00
74954dadf9
use unsigned variable types as appropriate
2001-08-05 18:07:51 +00:00
fcc522e5ce
It seems the fixed rate versions are actually fixed at 48 kHz, not 44.1 kHz.
2001-08-04 22:15:56 +00:00
7c292e3d22
- kill the carrier detect code. It's not usefull any more and can give
...
false informations on a loaded ethernet segement.
- convert to bus_dma(9) (better late than never :)
- add proper le32toh/htole32 so that it works on big-endian system (tested
on macppc).
Close PR kern/10327.
2001-08-03 16:53:08 +00:00
e7021f649d
Remove unnecessary test.
2001-08-03 14:10:16 +00:00
38016b0ba8
Fix some typos in newer ALi M5229 support. Approved by bouyer.
2001-08-03 01:31:08 +00:00
aaf3c7c88b
Hook in the mly control interface on i386.
2001-08-01 20:54:16 +00:00
2c44aa6dfd
Remove unused pciide_print() declaration. From OpenBSD.
2001-08-01 16:29:21 +00:00
f8e21592da
regen
2001-07-31 22:30:07 +00:00
b2c29c20ae
Add pci ids for the Intel 80312 I/O companion chip for the
...
Intel 80200 XScale processor.
2001-07-31 22:27:25 +00:00
aae284be36
Oops, put back the initalization of "done" in mly_thread().
2001-07-31 02:07:14 +00:00
5226d11119
Assume that me->lun contains the device number if this event is for a
...
logical device.
2001-07-30 23:49:51 +00:00
2fa020ae0b
- Forget to report events from logical devices.
...
- Cosmetic changes.
2001-07-30 23:46:28 +00:00
12c4049d31
Don't match boards with a PCI class code of `I2O'.
2001-07-30 23:29:08 +00:00
8fc6974449
Oops, make Rx interrupt deferral actually work.
2001-07-30 20:12:10 +00:00
3b1828355b
Add a driver for Mylex AcceleRAID and eXtremeRAID controllers with v6
...
firmware. Based off the FreeBSD driver, and re-worked by tls, erh and I.
2001-07-30 19:59:04 +00:00
690c5b1ae3
Enable the Acard UIDE controllers by default.
...
My WDC MDMA-only (non-UDMA) drives did not work on the Acard controllers,
but it turns out that the problem was not Acard specific.
These WDC drives do not work on the ESS ISAPnP wdc port nor on
macppc obio wdc port neither, and another Quantum MDMA-only drive
works fine on the Acard.
These WDC drives work fine on my i386 pciide (which is initialized
by the BIOS), so maybe we have to do something in MI wdc to initialize
such drives properly...
2001-07-28 12:07:11 +00:00
4ec277f9ee
regen
2001-07-28 00:33:43 +00:00
70cd305a5d
3c556 V.90 MiniPCI modem
2001-07-28 00:33:01 +00:00
fab087b3a2
Tell the MII layer to advertise PAUSE capability, and configure
...
the chip's PAUSE threshold.
2001-07-27 22:46:20 +00:00
8e2205572d
Better support for newer ALI M5229 chipsets: support Ultra/66 for rev >= 0xC2,
...
Ultra/100 for revs >= 0xC4.
The the generic PCIIDE interupt routine for chipsets rev >= 0xC2 in native
mode, it seems that newer chipsets don't have the ACER_CHIDS register :(
From Linux and FreeBSD.
2001-07-26 20:02:21 +00:00
4950b7867f
Map both memory and IO space, but prefer using memory space.
2001-07-26 15:35:20 +00:00
7a92f3b65a
Don't map I/O space if we have already have a good memory mapping.
2001-07-26 12:36:16 +00:00
799abef5f4
Jumbo frames do not currently work (chip goes catatonic -- silicon bug?),
...
so don't set the capability.
2001-07-25 15:44:48 +00:00
1dfe605642
Match the Antares Gigabit Ethernet.
2001-07-25 01:48:14 +00:00
560fc018c4
Regen; Added Antares Gigabit Ethernet.
2001-07-25 01:45:55 +00:00
4ac142a1d3
Add the Antares Microsystems, Inc. vendor ID, and the product ID
...
for their Gigabit Ethernet board (a TC9021 board targeted at the
Sun market).
2001-07-25 01:44:59 +00:00
6b0e779ce6
Remove a debugging #define.
2001-07-25 00:12:33 +00:00
3939c2a6c7
Driver for the Sundance Tech./Tamarack TC9021 Gigabit Ethernet
...
controller.
2001-07-25 00:11:51 +00:00
aa053c0bd1
Regen for TITAN PCI100H.
2001-07-23 20:14:36 +00:00
d2039a5f9b
Add TITAN PCI100H.
2001-07-23 20:13:26 +00:00
bd35a1b7ed
Make sure to initialize the all Rx descriptors properly in *_init()
...
even if mbufs for them are already allocated.
2001-07-23 17:26:50 +00:00
536f4fded2
Adjust some reset delays.
2001-07-23 17:23:09 +00:00
ecbce129cb
Handle HPT-370A controllers, from skanto@sjk-software.fi (kern/13540) but
...
with some differences to the original patch: don't assume all controllers with
rev >= HPT370_REV are HPT370, and explicitely print if we have a chip with a
rev the driver does't know.
2001-07-23 14:55:26 +00:00
93a890b609
it seems that pp_{up,down} code does not really help, since (1) sppp_ioctl
...
calls lcp.{Up,Down} by itself, and (2) as lmc driver uses interrupt to
get the card initialization callback lcp calls from sppp_ioctl
does not really work. for chdlc pp_{up,down} are not really necessary so
don't bother (#if 0'ed).
2001-07-19 19:15:13 +00:00
d775ce82eb
Hint BUS_DMA_READ and BUS_DMA_WRITE.
2001-07-19 17:47:18 +00:00
1bd93b6232
Hint BUS_DMA_READ and BUS_DMA_WRITE.
2001-07-19 17:19:40 +00:00
b66f433b03
sync with latest Linux driver, avoid framing error on LMC1200 (T1/E1).
...
from hal@vailsys.com
2001-07-19 17:02:05 +00:00
44e529fecc
Use BUS_DMA_READ and BUS_DMA_WRITE in some obvious places.
2001-07-19 16:36:14 +00:00
e13c617dee
do not call pp_{up,down} on cisco HDLC mode, it seems that
...
sys/net/if_spppsubr.c does not like it.
XXX api clarification needed...
2001-07-19 16:30:52 +00:00
639dfc8d8f
readability changes (s/0/LMC_LINK_DOWN/, whitespace)
2001-07-19 16:14:50 +00:00
abd116eff5
- on IFF_UP change, inform sys/net/if_spppsubr.c of the change so that
...
we can run LCP and subsequent PPP negotiation.
- suppress too noisy printf() for about AIS event (if you remove the cable,
it will bark forever).
- sppp_dequeue() can return NULL even when sppp_isempty() is false, so check
it and do not deref NULL pointer.
- sppp_flush() on LMC interface shutdown.
- prepare to change BPF type on the fly (bpf_change_type).
2001-07-19 15:38:17 +00:00
17538b3790
Costmetic change.
2001-07-18 01:10:09 +00:00
99e8b114e0
So, the PowerStorm 4d20 a.k.a. 32bit TGA2 w/ IBM RGB561 RAMDAC was causing
...
the kernel to panic since it is recognised as a TGA and the TGA driver
doesn't [yet] know what to do with it.
This patch fixes that by:
o making tgamatch() try to actually figure out what kind
of TGA card is there, rather than simply relying on the
vendor/product ids.
o creating a tga_cnmatch() so that the console code in
arch/alpha/pci/pci_machdep.c can cause the same to occur.
o breaking up some of tga_getdevconfig() into a few different
functions to re-use code that would have been duplicated.
o changed arch/alpha/pci/pci_machdep.c so that it calls out
to tga_cnmatch() if DEVICE_IS_TGA() matches before it decides
to attach the console as a TGA.
Addresses PR: port-alpha/12923
2001-07-16 00:55:16 +00:00
0b1849a71a
don't try to print pcitag_t values; these are opaque values that should not
...
be interpreted by MI code.
2001-07-11 08:36:46 +00:00
3d98de578f
Remove unnecessary include files. From Onno van der Linden.
2001-07-08 17:55:50 +00:00
bc5d06ea08
Some cosmetic shuffling.
2001-07-08 17:15:45 +00:00
9de94b45cc
Fix a very, very dumb mistake that broke multicast on the dp83815
...
and dp83820.
2001-07-08 16:56:50 +00:00
62794086ea
Change the structure of dp83815_set_filter ever so slightly.
2001-07-07 17:37:39 +00:00
7e92a47db9
bcmp -> memcmp
2001-07-07 16:47:43 +00:00
51e70f6731
bzero -> memset
2001-07-07 16:46:34 +00:00
80f54c0005
bcopy -> memcpy, strcpy
2001-07-07 16:40:23 +00:00
46909109f4
bcopy -> strcpy
2001-07-07 16:39:16 +00:00
008dd21471
bcopy -> memcpy
2001-07-07 16:37:38 +00:00
dfd7f38a43
Remove config glue for the old `ncr' driver.
2001-07-07 16:34:33 +00:00
444f8e5f30
Remove the old NCR 53c8xx driver. It no longer compiles (it was not
...
updated for the thorpej_scsipi branch), and has been replaced by Manuel's
MUCH BETTER `siop' driver.
The code can still be referenced by using cvsweb, checking out an
old revision, whatever. But it's no longer useful to have it appear
in a checked out source tree.
2001-07-07 16:20:55 +00:00
9ec2341af3
Add support for jumbo Ethernet frames on the DP83820.
2001-07-07 02:32:38 +00:00
cf65d4738c
Add a bunch of Vital Product Data definitions.
2001-07-06 20:20:55 +00:00
ddb7c50037
added bridge secondary bus reset macros.
2001-07-06 18:07:16 +00:00
aa7bfea672
split pccbb_intr_route() into seperate function.
2001-07-06 18:06:59 +00:00
583274a82c
For product names that include the media in the name, don't bother
...
saying "Gigabit".
2001-07-05 21:27:31 +00:00
4866f1a22b
Fix typo. s/extention/extension/
2001-07-05 08:38:24 +00:00
d79f9adc90
Add another Lava serial board.
2001-07-04 22:39:11 +00:00
1c51ff8336
Better fix for rev 1.94 (disable UDMA for SiS controllers with rev 0xd0):
...
Different chipsets have the same vendor/device/rev ID for the IDE controller,
but only one of them is buggy. So check dev/rev ID of the function 0
(pchb on the buggy one) of the same device to detect the buggy controller.
2001-07-04 16:26:17 +00:00
4f9dcdfb8a
Split the receive interrupt handler into two versions, one for the
...
SiS900/DP83815, one for the DP83820. In preparation for changes
to the DP83820 version for handling jumbo Ethernet frames.
2001-06-30 22:35:05 +00:00
8d829065a6
IFM_1000_TX -> IFM_1000_T, as (breifly) discussed on tech-net.
2001-06-30 17:53:58 +00:00
4e30120ef0
Sync the Tx descriptors pre- and post- on the Tigon 2.
2001-06-30 17:02:54 +00:00
f1ea6f5be0
When we're done setting up the General Information Block, sync it.
...
Sync the NIC-maintained stats structure as appropriate, as well.
2001-06-30 16:34:59 +00:00
c05a96f530
Add macros to sync the various bits of the DMA'd control data.
2001-06-30 15:57:58 +00:00
d2a3ac835c
Use macros (like those in every other network driver I have written)
...
to compute the offset of a structure in the DMA'd control data, and
the DMA address of that structure.
2001-06-30 15:39:51 +00:00
83b199c106
Split the tx-end-of-frame routine into Tigon 1 and Tigon 2 verions,
...
for the same reason we split the tx encap routine.
2001-06-30 14:56:59 +00:00
ee9c81dd38
Split the transmit encap routine into two versions: one for the Tigon 1
...
and another for the Tigon 2. This eliminates a conditional in the
loop around the DMA segments, and will make further cleanup easier.
2001-06-30 14:47:23 +00:00
291a21d3fb
Move the `ti_tx_ring_nic' pointer out of the ring-data structure
...
and into the softc. Garbage-collect the `ti_cmd_ring' pointer,
since bus_space is properly used to access the command ring.
2001-06-30 14:16:55 +00:00
6237e487ab
When a transmit is complete, sync (and unload!!) the DMA map used
...
for the packet. When setting up a packet for transmit, sync the
DMA map being used.
2001-06-30 05:48:24 +00:00
17238bfd2b
Move the Tigon/Tigon2 firmware, version 12.4.13+wpaul, to a
...
more appropriate location.
2001-06-30 04:33:11 +00:00
2642760b40
Update for D-Link ST201 change.
2001-06-30 01:05:25 +00:00
cdfa27aeeb
Regen.
2001-06-30 01:04:25 +00:00
9556d5b2f9
Change the DLINK ST-201 entry, add more Sundance/DLINK Gig-E
...
products.
2001-06-30 01:03:59 +00:00
f6bce1a60b
Correct spelling of media in the product names.
2001-06-29 23:58:08 +00:00
abda6184c0
In the `copy small' path, make sure to align the payload.
2001-06-29 23:36:03 +00:00
46e1a51e62
Add Tamarack Microelectronics, Inc. vendor ID, and product ID for
...
Tamarack TC9021 Gigabit Ethernet.
2001-06-28 04:45:09 +00:00
656bb8c5c7
added Solidum PAX.ware 1100 and Lucent ORCA PCI targets
2001-06-27 17:57:23 +00:00
db6d5fc4a7
When setting/changing an address, no need to call ti_init() if the interface
...
is already up.
Especially this allow netatalk to start properly on a ti interface.
2001-06-27 16:47:33 +00:00
e2f7c01bbd
This was able to crash my new alpha consistently when I started X.
2001-06-24 01:11:08 +00:00
8a46c28bc6
Proper media support for Compaq Deskpro 4000. PR kern/13244 from
...
Andrew Gillham.
2001-06-21 16:33:33 +00:00
ae2fb7473c
Regen; add/update 3Com 3CR990 products.
2001-06-20 19:52:19 +00:00
8e15530e96
Add more/update existing 3Com 3CR990 product IDs.
2001-06-20 19:51:12 +00:00
08415c62e6
Regen; add SysKonnect SKNET-GE.
2001-06-20 16:33:10 +00:00
70bbf8c3aa
Add SysKonnect SKNET-GE (GEnesis Gigabit Ethernet).
2001-06-20 16:32:32 +00:00
c633f47bfd
Regen.
2001-06-20 05:46:24 +00:00
34fe57df0e
Add O2Micro PCI-{CardBus,PCMCIA} bridges:
...
OZ6729, OZ6730, OZ6832/OZ6833, OZ6860 and OZ6812/OZ6872
2001-06-20 05:44:33 +00:00
7e843c3ccb
Device driver for the Sundance Tech. ST-201 10/100 Ethernet. This
...
chip is found on the D-Link DFE-550TX.
2001-06-19 23:00:47 +00:00
62224968e1
Add support for the Adaptec AIC-6915 10/100 Ethernet. This is
...
a 64-bit PCI chip, available in 1, 2, and 4 port models.
2001-06-18 22:05:35 +00:00
c07d2e1e96
Add Cisco/Aironet 350
...
Reported by Wolfgang Rupprecht <wolfgang@wsrcc.com>.
This doesn't fix PR 13181, which says the card doesn't work well.
2001-06-18 13:21:24 +00:00
e523b2f091
regen: Add Cisco/Aironet 350
2001-06-18 13:19:07 +00:00
61285ac2da
Add Cisco/Aironet 350
2001-06-18 13:18:08 +00:00
e65b619faa
Convert to use ether_ioctl() for SIOCSIFADDR and SIOCSIFFLAGS.
2001-06-18 11:06:26 +00:00
1506d21315
Make error checking/reporting a little more correct.
2001-06-18 01:58:08 +00:00
de98ab5b38
Regen.
2001-06-17 19:51:27 +00:00
b63b6d01e6
Add device IDs on the new iBook.
2001-06-17 19:50:33 +00:00
thorpej