1b80d8dd97
Add other isapnp id's for the 3c509.
1997-04-27 09:46:50 +00:00
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
89ea27100f
Update media selection, add 100Mbit info.
...
Add cross-references to parent buses.
1997-04-27 09:43:05 +00:00
bf37fc50d0
Rename the PROD_ID to PROD_ID_3C509 to make it possible to add other
...
product id's, e.g. for the 3c515.
1997-04-27 09:42:34 +00:00
a2e1f15ba7
- Replace the check for EP_BUS_PCMCIA in epsetmedia with a check for
...
EP_CHIPSET_3C509 and change it a bit so it works now with the 3c509
and still works with the 3c589.
- KNF
1997-04-27 09:38:50 +00:00
f906f30c34
Add isapnp(4) man page.
1997-04-27 09:09:50 +00:00
66783f1f43
* fix "cd ~" so that it works (from Simon Burge <simonb@telstra.com.au>
...
* move resetting of CFLAGS on powerpc to before optional CFLAGS settings
* minor code & man page cleanups
1997-04-27 03:21:38 +00:00
7b2c0237ea
Dutch catalog
1997-04-26 22:50:36 +00:00
1b12ce1554
Zwei tastatur ausrutscher corrigiert..
1997-04-26 22:26:59 +00:00
81a10d7725
Don't require that a device is open for writing to perform a raw
...
SCSI command that just reads.
1997-04-26 22:24:46 +00:00
c96effb7f8
don't allow i386_set_ioperm if securelevel > 1, either (and fix a really silly bug)
1997-04-26 21:33:42 +00:00
a27f67358b
document kernel changes
1997-04-26 21:31:09 +00:00
fd8263148c
document kernel change
1997-04-26 21:25:49 +00:00
3a98883bd3
Don't allow the time to be set backwards if in highly secure mode, since this would allow inode change times to be manipulated.
1997-04-26 21:22:57 +00:00
3d9b09a843
If in highly-secure mode, don't ever allow access to IO ports
1997-04-26 20:30:02 +00:00
64b4faf663
Don't look at archive information on platforms that run ELF binaries
1997-04-26 07:11:14 +00:00
0dbf4ab9b1
Determine filesystem level (ref: fsck_ffs(8) -c ...) and display it.
...
Code was derivied from observing how fsck_ffs `upgrades' to a given
level, and has been tested on recent NetBSD filesystems (reports as "3"),
SunOS ("1"), and ULTRIX ("0"). I haven't found a filesystem of level
"2" to test, but the code should detect it. Fixes [bin/1353]
1997-04-26 05:41:32 +00:00
151d9c8a60
add 0 and 0x prefixes for octal and hex numbers, in debug messages (based on pr#2964).
1997-04-26 05:12:32 +00:00
dca7ab624c
do not write pid file in debug mode. (pr#2825)
1997-04-26 05:08:29 +00:00
5164bf8772
handle hex hostnames (from vixie, as reported in PR#3535).
1997-04-26 04:12:08 +00:00
26adc250c2
Stop ignoring DCD transitions on ioasic SCC serial lines.
...
From entropy@zippy.bernstein.com>.
1997-04-26 02:26:54 +00:00
45d369d5fb
Ted Lemon's (RR 3540) cross-compilation patch: use ${SIZE} instead of size,
...
Also add "SIZE=? size", so that native kernel compiles work, too.
1997-04-26 02:20:59 +00:00
bbf513e2e5
Correct shm ifdefs for when SVSHM is defined. Fix from Ted Lemon in PR 3542.
1997-04-26 02:00:11 +00:00
55a34d0cf4
Add "options MIPS1" and delete commented-out lines inherited from GENERIC.
1997-04-26 01:35:41 +00:00
5d8f130bb6
Be quiet in sunmon_abort().
1997-04-25 22:26:14 +00:00
560544f47c
Add a -I${.CURDIR} to build netbsd.sa with a obj dir
1997-04-25 22:17:33 +00:00
593e5dd8e1
Pad of first mbuf in chain, even if it's a cluster (pr 3536).
...
Garbage-collect padding of header mbuf.
1997-04-25 20:14:37 +00:00
7c2c0c846c
- Provide the reasonable size that can/may be mmap-ed. This might differ
...
from the current frame buffer size.
- The et-driver now allows for a 16Kb io-region (was 8Kb) that can be
mapped. The XFree server uses this.
1997-04-25 19:25:38 +00:00
d5733f126e
Allow formatting of 360Kb floppies.
1997-04-25 19:18:04 +00:00
d1c63a4095
Changes to bounds_check_with_label:
...
- Take care of the case where d_secsize < DEV_BSIZE (From Waldi Ravens)
- Don't check if an unsigned value <= 0. This was the cause of various
panics when savecore(1) was reading at bogus offsets because the crash
dump format was changed. Thanks to Jason for unintently revealing the
bug ;-)
1997-04-25 19:16:30 +00:00
92efd222d0
Hack for now: if fpu is there, report it as an mc68882.
1997-04-25 19:16:10 +00:00
dfc2e0f30d
Add devices: idprom, oclock. Add file leds.c.
1997-04-25 19:12:57 +00:00
1676e3a212
Add idprom, oclock, and rearrange somewhat.
1997-04-25 19:11:48 +00:00
ef06b2e55d
Use info on the actual RAM-segments to check the validity of /dev/mem
...
accesses. Reformat some comments.
1997-04-25 19:07:45 +00:00
cd6ee4737e
Renamed obio_alloc/obio_mapin.
1997-04-25 19:02:46 +00:00
678f326c7f
Make idprom_init() figure out where the IDPROM resides.
...
Add autoconfig glue, which currently just shows the
address where the IDPROM was found.
1997-04-25 19:02:06 +00:00
49f095a342
No longer need eeprom_init().
1997-04-25 18:57:49 +00:00
e2ca51d2a1
Fixed OBIO locators bug, so this can do the normal thing now.
...
Also improved handling of spurious interrupts, and sync up with
the sparc version.
1997-04-25 18:55:05 +00:00
4c64781365
Moved the actual model identification work into identifycpu(),
...
which used to be in _startup.c:_verify_hardware().
Use sunmon_abort() in cpu_reboot() for now...
1997-04-25 18:52:11 +00:00
9ae1b69554
Rename "Idle" to "_Idle" so clock.c can reference it.
1997-04-25 18:48:39 +00:00
25d7b6b348
Provide a struct representing only the clock.
1997-04-25 18:47:41 +00:00
885a1fc439
Add /dev/leds support.
1997-04-25 18:46:10 +00:00
2dd63e3378
Use bus_mapin, and minor tweaks.
1997-04-25 18:45:39 +00:00
f7749f47fe
Add "oclock" support for the Sun3/470.
1997-04-25 18:31:37 +00:00
8f9276c727
Move the _verify_hardware() work into machdep.c:identifycpu().
...
Call obio_init() after _vm_init() so we can use peek_byte() to
probe the idprom. Be quiet in _save_symtab() when all is well.
1997-04-25 18:29:58 +00:00
f48f58b0ab
mvme68k uses the new crash dump format now.
1997-04-25 18:16:44 +00:00
eeaf366b67
mvme68k uses new crash dump format now.
1997-04-25 18:15:48 +00:00
b41693a034
Moved bus_scan() and bus_print() from here to bus_subr.c
...
because they are now different in sun3 vs sun3x.
1997-04-25 18:07:36 +00:00
477a320277
Moved bus_scan() and bus_print() here from autoconf.c
...
because they are now different in sun3 vs sun3x.
1997-04-25 18:02:47 +00:00
3619a4da3d
Rename obio_alloc to obio_mapin, update *_init declarations.
...
Remove OBIO_P4_REG (not a fixed address, but per-device).
1997-04-25 18:00:49 +00:00
veego