f0047e072f
Better definition of PA_IS_DEV, and use it two more places.
1997-11-19 19:28:10 +00:00
16b3bf5830
Eliminate a nasty and horrible kluge by using the BSD.x11.dist when
...
checking the directory tree for an X11 package.
1997-11-19 16:41:21 +00:00
261191603a
copyright foo
1997-11-19 15:35:36 +00:00
2e65c33090
Make sure isapnp_config() runs before we allocate the DMA channels.
1997-11-19 14:19:59 +00:00
cd110ecf63
Use a default of 32MB for the root filesystem with a custom partition
...
layout.
1997-11-19 14:06:47 +00:00
1adbb93466
* Disable parity checking on all devices until we find a better way to
...
deal with cheap CD-ROMs and other devices that do not appear to have
any way to enable parity generation. In the future, it might be nice
to have this configurable on a per-device basis with back-to-back
parity errors automatically disabling parity for the device. That
would require some MI changes.
* Handle unaligned and odd-length transfers.
This could probably be handled better in the future.
1997-11-19 13:01:32 +00:00
de0e348150
Add myself to donations list
1997-11-19 12:21:57 +00:00
59391eaa69
Mention r4000 based DECstations in the "significant changes" section.
1997-11-19 12:07:23 +00:00
ffb419d374
Enable CHAPMS and MSLANMAN. Make them compile. I don't have access to a test
...
setup to verify that it works.
1997-11-19 11:59:58 +00:00
f153059f4d
Add a clarification how the missing data are looked up if either
...
mount source or target are omitted. Adresses PR 3240.
XXX This is not the complete truth. Things change with the -u
option. Should be fixed in "mount.c".
1997-11-19 11:32:03 +00:00
0afda495f5
Do the Pentium bug fix differently. Put the IDT in a read-only page and check
...
for a write fault on the illegal instruction descriptor. Don't ask why this
works unless you have a strong stomach.
1997-11-19 11:11:22 +00:00
9e88e02f86
Add "TI TravelMate 5000 series laptop docking station's ethernet board" to
...
the list of supported harware by the TL driver (per William Coldwell).
1997-11-19 09:53:20 +00:00
604ab80fa9
mount_mfs: avoid spurious error message if the mount system call returns
...
for "valid reasons" (ie, "mount -u")
1997-11-19 09:48:52 +00:00
c70a2f5e64
make /usr/games/hide mode 750, and remove bogus /var/games/save entry.
1997-11-19 08:29:59 +00:00
a2f4e2a852
make hidden games mode 550, group games.
1997-11-19 08:26:35 +00:00
c1fdab6ca5
remove an old setgid() from when dm(6) was setuid kmem (i assume for getloadavg())
1997-11-19 08:24:09 +00:00
ae2aef9bc3
make dm setgid games, rather than setuid games.
1997-11-19 08:23:37 +00:00
4082a0aec6
make hidden games mode 550, group games.
1997-11-19 08:23:16 +00:00
1eeb8e6b5f
move hunt under dm(6)
1997-11-19 07:07:46 +00:00
2311eecbad
Fix emulation, mostly from Dave Huang in PR 4482 (one tweak by me for CUU/CUD, and
...
one from him to correct a fencepost error in {reset,clear}_tabs()).
1997-11-19 07:00:03 +00:00
470342eec5
Recognize HP ScanJet 5p.
1997-11-19 03:03:15 +00:00
5ea276f19a
Correct handling of "physical address" values given to us by the
...
VM code, which may have low bits specifying device space!
1997-11-19 00:19:10 +00:00
9bef2d1d82
If the arp cache is empty, don't even attempt to retrieve it. Fixes
...
'bad address' message when the cache is empty.
1997-11-18 23:14:38 +00:00
e07f4ba47c
Need <string.h> for prototypes.
1997-11-18 22:58:00 +00:00
d0333aa752
Define struct statfs.f_flags as unsigned short instead of signed short.
...
Fixes PR#4530. Suggested by Jason R. Thorpe.
1997-11-18 21:35:16 +00:00
8cbf1ce96f
Const'ify some things, rename local puts() to xputs(), since it has
...
a different prototype than the one in <stdio.h>
1997-11-18 21:29:11 +00:00
44c123573b
Define PC_ADVANCE() to advance the PC around the break instruction only
...
if the break instruction is still there. This works around a problem with
the software single step in DDB not recognizing the temporary breakpoint
set to emulate the single step.
1997-11-18 21:13:17 +00:00
bb8dae3601
Move inclusion of <sys/types.h> before that of <sys/signal.h>.
1997-11-18 20:30:24 +00:00
f027428995
Cursor is supposed to be turned on when unblanking the screen.
1997-11-18 20:16:28 +00:00
f1a39fe2df
Recognize another card and handle the case when both drqs are the same.
1997-11-18 19:24:46 +00:00
ba76377205
Make an XXX note about the broken ALS id.
1997-11-18 19:17:21 +00:00
50be28153c
Change order of include files. See PR #4532 .
1997-11-18 12:40:31 +00:00
e0746c57db
Fix for systems with multiple tl interfaces:
...
nullbuf (used to pad packets < ETHER_MIN_SIZE) is used for all tl
interfaces. Allocates only once, and never deallocate it (as we can't say
if another instance of the driver is interface is using it).
1997-11-18 12:26:09 +00:00
fe3e796d68
Dropped an else in last commit.
1997-11-18 11:34:50 +00:00
ee5628ee52
Add another PnP id.
1997-11-18 11:31:07 +00:00
c622832eb0
Add another card and take care of swapped drqs.
1997-11-18 11:27:04 +00:00
f38eaf9f71
Add text to man page to indicate NetBSD submitter-id convention: all are "net",
...
per PR#3993. Also add text describing the Priority, Severity, and Class fields
of the PR form.
1997-11-18 08:05:11 +00:00
02e8f7539b
oops! dont clobber the list after building it. (pr#4528 John.P.Darrow@wheaton.edu)
1997-11-18 07:17:09 +00:00
8e4ac5fee0
use warn("%s", func()) instead of warn(func())
1997-11-18 07:01:50 +00:00
2b952b2261
Remove an extra comma at the end of SEE ALSO list.
1997-11-18 07:00:48 +00:00
dafe39d6fe
Use .Sh RETURN VALUES instead of .Pp, as malloc.3 or free.3 does.
1997-11-18 06:58:46 +00:00
6236ac0333
use .Tn YP
1997-11-18 06:52:15 +00:00
6940412e60
Fix typo; update `buf' by return value from realloc(3).
1997-11-18 06:44:51 +00:00
732e64a580
fix PR#4412 (from darren reed).
1997-11-18 06:09:25 +00:00
3ae5aa45df
Forgot a subdir.
1997-11-18 05:16:50 +00:00
760b87dd7c
Debugger() is called outside #ifdef DDB - fix.
...
remove simple monitor.
1997-11-18 03:09:09 +00:00
a722a42f3d
Use file mode 0600 when creating special file or fifo.
...
Suggested by Charles M. Hannum.
1997-11-18 03:08:21 +00:00
076c3b6f00
Restore file attributes after extracting regular file. Fixes PR#4515
...
from stephen.ma@jtec.com.au:
- call getfile() before altering file attributes.
- open file with mode 0600 instead of 0666 so that file won't remain
group or world readable/writable even if getfile() terminated.
- also, move skipfile() before altering file attributes in IF{CHR,BLK} and
IFIFO case for symmetry (suggested by Charles M. Hannum).
1997-11-18 02:56:35 +00:00
7cf15a500f
Boot loader changed addresses due to a size increase and a similar change
...
size in the boot floppy.
1997-11-18 01:19:21 +00:00
1c60498c17
Change sizes in boot3 for larger boot loader.
1997-11-18 01:14:42 +00:00
gwr