6dd21e55a9
Make attach messages consistent with PCI drivers. Make function pointer
...
usage consistent with other drivers.
2000-06-08 22:15:52 +00:00
b6a821f042
Change IPL when bridge's interrupt handler calls child device's
...
interrupt handler (This solution is not very good).
2000-06-08 10:28:28 +00:00
295ed77595
The OPTi controller supports a 32-bit dataport after all.
...
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
2000-06-07 20:42:52 +00:00
887d4555cd
Regen.
2000-06-07 19:53:17 +00:00
4837200a8c
Add vendor/device ID for 3ware Escalade IDE RAID controller.
2000-06-07 19:52:07 +00:00
a67130a218
regen.
2000-06-07 09:55:22 +00:00
09b843b7f6
fix a couple of the sun entries.
2000-06-07 09:52:16 +00:00
dca97557cd
Add CB_BCR_RESET_ENABLE in bridge control resister's bit definition.
2000-06-07 09:02:46 +00:00
b15bbb90f9
Add missing break;
2000-06-07 04:31:49 +00:00
13ed0863f8
Regen.
2000-06-07 01:58:17 +00:00
e2c1012576
Add Trident 9397DVD.
2000-06-07 01:57:30 +00:00
c85d6d7ca3
Improve the Cypress name a little.
2000-06-06 22:56:06 +00:00
a452638f06
In pciide_mapreg_dma(), check to see what type the BAR is before
...
mapping the registers, as suggested by a comment in that function.
2000-06-06 22:47:22 +00:00
ba5df2479b
Shorten names of VIA controllers to fit in 80 columns with versions.
2000-06-06 17:48:12 +00:00
c40fa3c4d4
Actually program the DMA mode of the drives into the Cypress
...
controller. Fixes a long-standing problem where IDE DMA wasn't
working on the AlphaPC 164SX.
2000-06-06 17:34:22 +00:00
05d7f969b9
Regen.
2000-06-06 07:55:50 +00:00
aed5858e8b
Add the product ID for the ESS Maestro 3 modem function as well.
2000-06-06 07:55:17 +00:00
21d9669e4f
Common routines for read/writing Cypress 82c693 control registers. Needed
...
by `pciide' and the Alpha `sio' (PCI-ISA bridge) driver.
2000-06-06 03:07:39 +00:00
8c4d1bf1f9
Adapt MI ncr53c9x changes.
2000-06-05 15:08:00 +00:00
ca3d9c7fa7
Regen.
2000-06-05 11:34:07 +00:00
428a7ca4e3
Add the ESS Maestro 3 product ID as well.
2000-06-05 11:33:35 +00:00
9b40e3731a
Regen.
2000-06-05 11:31:15 +00:00
be40495bb0
ESSTECH:
...
* add what's allegedly the Maestro 1's product ID.
* align product names with data sheets.
2000-06-05 11:29:28 +00:00
745e3fef63
pciiide -> pciide
2000-06-04 22:22:12 +00:00
f44619d89d
KNF some lines.
2000-06-02 18:34:05 +00:00
87a5ae384c
Update URLs.
2000-06-01 09:58:19 +00:00
f1b4af5ba1
Make this compile too.
2000-05-30 08:36:27 +00:00
e78793c612
Beginning of a IEEE 1394 framework. An attachment for PCI OHCI controllers
...
and bus-independent module that just begins to print things out. No real
code behind it. THIS IS A WORK IN PROGRESS. The *reg.h are woefully
incomplete.
2000-05-30 06:56:13 +00:00
c7326acd04
Add the PCI attachment for IEEE 1394 OHCI controllers. Files to follow later.
2000-05-30 00:53:14 +00:00
fd1991294f
Regen
2000-05-30 00:21:07 +00:00
adaaa34784
Add the TI 1394 controllers. Makes all the 1394 controller descriptions
...
similar.
2000-05-30 00:20:41 +00:00
8cde93a435
* Support (not so) new cards. (only Cyclom-8YsP+ is tested)
...
* Make compilable with CY_DEBUG.
2000-05-29 12:05:41 +00:00
c461529353
regen
2000-05-28 10:25:25 +00:00
f8091908b5
-correct description for 3c905b-FX (100 Mb only)
...
-add Neomagic 256ZX
2000-05-28 10:24:57 +00:00
3a4393ff92
While DM9102A boards tend to have ISV-format SROMs (likely to describe
...
the HomePNA PHY typically connected to the external MII interface),
DM9102 implementations (often found on motherboards) do not. Handle
this.
2000-05-27 19:42:06 +00:00
46807640c7
Add support for the OPTi 82c621 PCIIDE controller and its derivatives.
...
I only have a Compaq laptop on which to test this, so reports of
success/failure in other systems would be welcomed.
2000-05-27 17:18:41 +00:00
1d2a3e79a9
Regen.
2000-05-27 17:12:36 +00:00
713621eb0e
Add entries for a couple of OPTi PCI-IDE controllers.
2000-05-27 17:11:37 +00:00
00369993f9
Whitespace police.
2000-05-27 16:38:02 +00:00
ed0572ca92
Regen.
2000-05-27 11:40:04 +00:00
eaef48d317
Add a few devices.
2000-05-27 11:38:31 +00:00
8a3725612d
Add support for the Davicom DM9102 and DM9102A 10/100 Ethernet chips.
...
Partially based on diffs submitted by Matthew Orgass <darkstar@pgh.net>
and IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>.
2000-05-26 16:38:13 +00:00
3d7bdc4c94
Fix a bug introduced in last commit which caused a painc due to
...
re-enqueueing an already free ccb.
Prepare the background to have a unique initialization function for
all of the supported host adapters.
Rename a lot of #define in a more sane way.
Move Carriers initialization and defines in adwmcode.{c,h}
Don't lose Carrier nodes in case of a BUS/Chip reset explicitly invoked
after a DMA failure.
XXX - DMA failure still arise when AdvanSys U[2]W host adapters are used
in conjunction with Intel 82443BX Host Bridge/Controller (rev. 0x03).
!?!Have to understand why!?!
2000-05-26 15:13:43 +00:00
bf05730540
Regen.
2000-05-26 05:07:02 +00:00
5bd1e75033
Add NEC 1394 OHCI chips
2000-05-26 05:06:27 +00:00
b063b2ec36
Separate the sheduler from the main script, allocate another DMA-safe
...
memory page for the sheduler. Put the main script in the on-chip RAM when
available.
Avoid a null-pointer dereference when DSA is invalid.
2000-05-25 10:10:54 +00:00
4f92d2cd54
Update from Bill Studenmund <wrstuden@zembu.com>:
...
- Note that the FreeBSD driver distributed by Cyclades served as
documentation on how the board works.
- Use the wait-until-pending-I/O-completes-before-loading-parameters
command in czttyparam().
- Pass BREAKs up to the tty later properly.
- Garbage-collect some debugging code.
2000-05-24 22:26:35 +00:00
8f7304f9b7
Typo in previous.
2000-05-23 16:47:44 +00:00
5c9920bbb6
Update from Bill Studenmund <wrstuden@zembu.com>:
...
Correctly send and receive BREAKs -- still needs to do something
intelligent with them. Some additional debugging goo.
2000-05-23 01:02:21 +00:00
c2b6147132
Replaced overlooked BROOKTREE_SYSTEM_DEFAULT with BKTR_SYSTEM_DEFAULT,
...
as noted by Roger Hardiman.
2000-05-22 01:00:29 +00:00
56cb02c358
Use bktr_softc.bktr_dev.dv_xname instead of "bktr0" when printf'ing as
...
requested by Klaus Klein in kern/10166.
Also add device instance name to all printf's that didn't have it.
2000-05-21 15:43:56 +00:00
c3e3a945cc
Add a missing bktr%d: in one of the attach messages.
...
(When is this code going to be KNFed?)
2000-05-20 16:16:15 +00:00
f2973e2fb8
- Change RL_* -> RTK_*
...
- Free bus_dma resources if attach fails
- Add detach and power management code
Patch from Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp> in kern/10156.
2000-05-19 13:42:29 +00:00
3e403cdb65
In tiocm_to_cztty(), use SET() instead of CLR() in the
...
TIOCMBIS case. "Oops!"
2000-05-19 06:01:14 +00:00
59164fe0fc
Fix an inverted test.
2000-05-18 17:55:17 +00:00
6095f60587
regen
2000-05-18 13:04:27 +00:00
309b0ed70d
fix typo in last commit
2000-05-18 13:03:31 +00:00
4d3e8e6976
regen
2000-05-18 08:03:22 +00:00
81fd58c65b
Add the device ID for the IBM MPIC-II.
2000-05-18 08:02:19 +00:00
5274a6162f
Add a device driver for the Cyclades-Z series of intelligent multi-port
...
serial boards. Written by Jason R. Thorpe and Bill Studenmund.
2000-05-17 17:58:09 +00:00
07ea678d4d
Register definitions and preliminary API definition for the PLX 9060
...
family of PCI bus controllers.
2000-05-17 17:47:00 +00:00
c4042e45a5
Sync my copyrigth notice.
2000-05-15 08:46:00 +00:00
e557084177
Update for siop split.
2000-05-15 08:27:24 +00:00
a1c4db6c37
- split siop_pci in attachements vs helper functions, for comming esiop
...
- add a reset callback to enable PCI-specific features. This improve bandwith
by a factor of 2 on my alpha with a 875 !
- sync copyrigth notice
2000-05-15 07:53:17 +00:00
e5ae7c287a
Symbol namespace cleanup: rl_ -> rtk_
2000-05-15 01:55:12 +00:00
a4b298224a
Use <dev/ic/ac97reg.h>
2000-05-15 01:35:29 +00:00
1838aef29c
ac97.h -> ac97var.h
2000-05-15 01:27:44 +00:00
8513bb93ed
Regen.
2000-05-14 14:58:14 +00:00
b84dfa7c45
Add SGI IOC3.
2000-05-14 14:56:53 +00:00
e0292df01c
sc_ih (interrupt cookie) is not pci-specific data
...
and needs to remain in fxp_softc rather than fxp_pci_softc;
otherwise we break cardbus.
2000-05-12 18:46:33 +00:00
cd82969dfc
Print the revision info from the PCI configuration header. From
...
Dave Sainty, kern/10025.
2000-05-12 17:52:07 +00:00
c8de5ae180
Treat the 3c980C-TXM like the 3c980 Server Adapter. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:48:47 +00:00
032c5f01de
Regen.
2000-05-12 17:47:05 +00:00
0a712d4707
Add product ID for 3Com 3c980C-TXM 10/100 Ethernet. From Paul J. Lavoie,
...
kern/10037.
2000-05-12 17:46:47 +00:00
288883fca7
Apply indent(1).
2000-05-12 16:42:41 +00:00
6474f16852
Use ether_crc32_le().
2000-05-12 16:41:59 +00:00
421c001447
Move struct fxp_pci_softc declaration to if_fxp_pci.c removing an
...
unnecessary header file (if_fxp_pcivar.h); oh, how quickly the nascent
inodes are subject to infant mortality.
2000-05-12 13:46:31 +00:00
cd552bf956
Fix bugs seen on Sony Vaios.
...
Address kern/9370, kern/9548, kern/9571, and kern/9573.
Save and restore critical PCI configuration registers because they are
sometimes bashed.
Add a powerhook to restore said PCI registers after APM events.
The fxp now works across a warm boot from windows (vaio).
The fxp now works across an apm suspend/resume or hibernate/resume cycle.
2000-05-12 03:37:40 +00:00
6622f20fc1
Move pci-specific data to fxp_pci_softc from fxp_pci_softc.
...
Add some more pci-specific data to fxp_pci_softc.
2000-05-12 03:36:18 +00:00
8d671b6292
Define some PCI power management CSR constants.
2000-05-12 03:35:34 +00:00
5786c811d5
Support 64-bit PCI memory mapping registers, as sometimes are used
...
on the Symbios 53c896 controller. Also, prefer memory space over
I/O space.
2000-05-10 17:22:46 +00:00
90f7e687dc
These are no longer used.
2000-05-10 17:09:44 +00:00
d56c0ff801
Support Adaptec U2W cards with a 64-bit PCI memory range (such cards
...
are available with Power Macintosh G3 and G4 systems).
2000-05-10 17:07:52 +00:00
5939e70ca3
Add support for mapping 64-bit PCI memory space. If the region
...
is mapped in a way that is inaccessible by a 32-bit bus_addr_t, then
print a message to that effect and return failure.
Original patches by Bill Studenmund, with a few small changes by me.
2000-05-10 16:58:42 +00:00
7a6f003756
Add a comment describing the previous change.
2000-05-10 08:39:58 +00:00
7d4bae615d
Move if_rl_pci.c:1.7 to if_rtk_pci.c.
2000-05-10 00:19:55 +00:00
05e928a241
Ops, abort if we can't map the registers ! Pointed out by Matthias Drochner.
2000-05-09 17:05:52 +00:00
2648a72bb2
Minor changes to PCI configuration
2000-05-08 17:11:54 +00:00
6d3ce966ce
VIA VT82C686A hardware monitor
2000-05-08 16:40:42 +00:00
05f0b17555
Make pci_get_capability() work correctly on both header type 0 and type 2
...
devices; both have different Capability List Pointer registers.
2000-05-08 10:52:38 +00:00
085ec82073
Add a register offset for the Capability List Pointer in header type 2.
...
XXX Ideally the PCI-Cardbus Bridge header should be restructured to just
XXX present standard register definitions, making it ~safe to be included.
2000-05-08 10:45:52 +00:00
de328af944
Fix a inverted logic botch introduced in rev. 1.35, typically causing
...
cb_chipset() to return the wrong chipset type.
2000-05-08 07:31:20 +00:00
8651580247
man page is written, remove it from TODO
2000-05-07 20:47:10 +00:00
8ee4c016eb
PCI product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 17:00:06 +00:00
0d57ac396d
Product codes for Yamaha YMF744B (DS-1S) YMF754 (DS-1E) audio chips.
2000-05-07 16:56:34 +00:00
f7e2752025
Change one 0 for bootverbose to 1 if DEBUG is defined.
2000-05-07 14:59:23 +00:00
20ae91400c
Add a dummy bootverbose.
2000-05-07 14:49:11 +00:00
21942247f3
It is a bad idea to declare a static bootverbose variable here. Remove it.
2000-05-07 14:43:31 +00:00
4211fcfd7e
remove unnecessary output to console
2000-05-07 13:50:10 +00:00
7392f90215
multiple inclusion protection
2000-05-07 03:01:58 +00:00
gmcgarry