sizeof(_res) must be the same for libc, libresolv and libbind.
libc and libresolve uses bind4 while libbind seems to use bind8.
complete fix would be to share the same codebase among libc and libbind,
but I don't know if importing bind8 into libc/libresolv (or bind9 to
all the places) is the right answer. it involves a big change.
PR: 7966
was being initialized to a KVA, when we really wanted a DMA address. Change
the code to allocate the overrun buffer with the control blocks, and
properly initialize overrun_buf.
Note that overrun_buf cannot actually be shared between all boards; DMA safe
memory could vary from bus to bus.
Garbage-collect two functions which are no longer used because of the
above changes.
region first (using the data/bss protection) covering it, then overlay
the text and data regions at the appropriate offsets within the region,
and then unmap any gap between the text and data.
The previous method of maping the entire address space with the actual
file object itself is incorrect, as it may extend past the end of the
file if the section alignment is large enough.
This bug was the source of the libposix failure on the SPARC and another
similar failure (with libc!) on the Alpha (failure was accompanied by
a "uvn_io: size check fired" message on the console).
2 times in the past
- Set up timeout per xfer instead of per interrupt. This helps with
PIO transfer (we would call timeout()/untimout() several times for a
transfer).
- If we missed an interrupt for a PIO transfer, reset and restart it
immedialy, don't try to recover and continue. If we missed an interrupt we
may have lost a read/write cycle on the IDE bus. If this happens 1) we
corrupt data and 2) we enter an interrupt loop at the end of the xfer, as
the drive has some more data to read/write, but the host thinks the xfer is
done.
This last change fix the (or at last some of the) 'lookup after lost interrupt'
some peoples have been experiencing.
the 68901. Do this now by _assigning_ ~<bit_to_clear> instead of the
previously used 'andb ~<bit_to_clear>'. The latter caused a rwm-cycle that
caused a race condition to happen when an interrupt arrived between the
Read and Modify-Write.
Anyway, this solved my hanging keyboard problem.
that is priority is rasied. Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.
This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).
XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX. This platforms still have this bug until their
XXX spl*() functions are fixed.
