on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.
The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
struct timeval passed to todr_gettime(9) and todr_settime(9).
We no longer have an ancient and volatile struct timeval `time'
global since we have switched to MI timercounter(9) on all port.
XXX1: some of these RTC drivers still assume 32bit time_t
XXX2: some of these should be rewritten to use todr_[gs]ettime_ymdhms()
XXX3: todr(9) man page doesn't mention todr_[gs]ettime_ymdhms()
- use SYSMAP_VA, SEGSHIFT for Sysmap address and table entries
- use TIA_SIZE, TIB_SIZE for sizes of table entries
Now page size dependent numbers are almost replaced with proper macro.
Tested on atari, hp300, and news68k.
Also explicitly set uvmexp.pagesize to prepare 8KB/page settings.
XXX: There is #ifdef !defined(amiga) && !defined(atari) workaround
XXX: because they have different pmap initialization functions.
- move macro SEGSHIFT, NBSEG, and SEGOFSET from <machine/param.h>
to <m68k/pmap_motorola.h> where they should belong
- also simplify NBSEG macro for both 020/030 and 040/060 cases
- also move m68k_trunc_seg(), m68k_round_seg(), and m68k_seg_offset()
(that use SEGOFSET) from <m68k/param.h> to <m68k/pmap_motorola.h>
- add comments about each segment size value used on pmap_motorola
implementation
- add TIA_SIZE, TIA_SHIFT, TIB_SIZE, and TIB_SHIFT macro which can be
used for ste/pte index sizes
- use proper vaddr_t cast instead of unsigned for SEGOFSET/PGOFSET macro
Tested on atari, hp300, and news68k.
They were incorrect since 1997 on amiga and atari, and since 2002
on other ports, but fortunately they don't look so fatal.
Anyway, these values will be moved into <m68k/pmap_motorola.h> soon
since they are quite pmap implementation dependent.
from MD pmap bootstrap sources to common pmap_bootstrap_finalize().
Tested on atari, hp300, mac68k, and news68k.
XXX: Why is protection_codes[] array initialized at run time?
- for 040/060, move L2 descs for Sysptmap from the last L2 block in segment
table pages to the contiguous block with ones for segment table mappings
- for 020/030, invalidate ste and pte entries separately since
ste size (TIA_SIZE) and pte size (TIB_SIZE) could be different
on 8KB/page systems
Tested on hp300 (040), mac68k (LC040), and news68k (030)
(and untested on others).
XXX: some more stuff in pmap_bootstrap.c could be moved into
XXX: common pmap_bootstrap_finalize()?
between other page tables to use different mappings for ste/pte pages
as well as amiga and atari. Should resolve XXX comments in next68k and x68k.
Tested on hp300 and mac68k.
- Replace most remaining uses of l_addr with uvm_lwp_getuarea() or lwp_getpcb().
- Amend assembly in ports where it accesses PCB via struct user.
- Rename L_ADDR to L_PCB in few places. Reduce sys/user.h inclusions.
- Addresses the issue described in PR/38828.
- Some simplification in threading and sleepq subsystems.
- Eliminates pmap_collect() and, as a side note, allows pmap optimisations.
- Eliminates XS_CTL_DATA_ONSTACK in scsipi code.
- Avoids few scans on LWP list and thus potentially long holds of proc_lock.
- Cuts ~1.5k lines of code. Reduces amd64 kernel size by ~4k.
- Removes __SWAP_BROKEN cases.
Tested on x86, mips, acorn32 (thanks <mpumford>) and partly tested on
acorn26 (thanks to <bjh21>).
Discussed on <tech-kern>, reviewed by <ad>.
The head of the list is now a pv_header, which contains the first pv_entry
as well as a 16-bit attributes field (replaces the pmap_attributes array
plus the pv_entry::pv_flags field) as a 16-bit count of caller-specified
cache-inhibited mappings.
Tested on hp300 (shared pmap_motorola.c), changes to atari and amiga copies
are purely mechanical.
<sys/systm.h> to the one file that did not already contain it.
This now means that physmem can be changed by updating systm.h and uvm_page.c
(excluding fixing printfs)
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)
See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html
Reviewed by abs@ in private mail.
virtual_end, and protection_codes[] to common <m68k/pmap_motorola.h>,
and also make protection_codes[] unsigned.
XXX: avail_start and avail_end should also be moved, but it causes
XXX: -Wshadow warnings in uvm/uvm_page.c:uvm_page_physload() and
XXX: I don't have a good idea of alternative names for now.
