8489e9c53e
Add product id of ServerWorks CSB6 IDE controller.
2003-02-28 22:05:00 +00:00
d46f710241
Enable the MII output drivers in hme_mifinit() based on the currently
...
selected transceiver. Save and restore this setting in hme_mii_readreg()
and hme_mii_writereg().
2003-02-27 14:58:22 +00:00
7f7fb5aa9c
Back out rev. 1.26; I forgot about the Javastations..
2003-02-27 13:33:23 +00:00
db07312961
Some machine have a `SUNW,CS4231' node, but no actual hardware. It seems
...
these can be identified by a `serial' device type.
From Julian Coleman.
2003-02-27 13:30:39 +00:00
ae13b3f806
bus_size_t != bus_addr_t, so use bus_size_t where appropriate.
...
Fixes PR kern/20482 by John Ruschmeyer.
2003-02-27 07:50:57 +00:00
24f5eee0e7
Make this work as fdisa again on the Atari/Milan.
2003-02-26 20:48:48 +00:00
e2b5c0723f
Remove unexpectedly imported ACPI CA files and obsolete files
2003-02-26 17:06:40 +00:00
1014d5a4e4
Regen.
2003-02-26 11:51:05 +00:00
fc8db570ec
Add few more Silicon Motion, Inc. cards (Lynx EM, Lynx 3DM, Lynx 3D, Lynx)
...
Print various [company], Inc. consistently as (surprise) [company], Inc.
2003-02-26 11:48:58 +00:00
65e5548a17
Add MBUFTRACE kernel option.
...
Do a little mbuf rework while here. Change all uses of MGET*(*, M_WAIT, *)
to m_get*(M_WAIT, *). These are not performance critical and making them
call m_get saves considerable space. Add m_clget analogue of MCLGET and
make corresponding change for M_WAIT uses.
Modify netinet, gem, fxp, tulip, nfs to support MBUFTRACE.
Begin to change netstat to use sysctl.
2003-02-26 06:31:08 +00:00
52acc108b6
Play nice with files. Since we are doing an fd_getfile(), make appropriate
...
use of FILE_USE() and FILE_UNUSE().
2003-02-25 23:29:14 +00:00
3ea6b8be93
Add missing splbio() protecting of bufpool access. Add a clarifying
...
comment to <sys/buf.h> reminding everyone of the need for splbio().
2003-02-25 21:25:40 +00:00
eb14e86676
Add a new BUF_INIT() macro which initializes b_dep and b_interlock, and
...
use it. This fixes a few places where either b_dep or b_interlock were
not properly initialized.
2003-02-25 20:35:31 +00:00
6cc1deb5ca
Add recording support for emuxki(4). The patch is basically the same
...
as I submitted in PR kern/18093. Some of the patch needs refinement.
Also, only the ADC recording source is supported, because the other
sources are probably much less useful and the implementation isn't
trivial.
2003-02-25 08:48:24 +00:00
595c6d88b2
Add support for Prism monitor mode. From Kevin Lahey
...
<kml@patheticgeek.net>.
This patch does NOT add monitor mode support for the Lucent radios.
awi(4) was only modified for compatibility with the new mediaopt.
It does NOT support monitor mode.
Tested by Kevin, Daniel Carosone, and I.
2003-02-25 01:57:35 +00:00
9b203bb525
Step 0 of adding Prism monitor mode: name the firmware command for
...
setting up manufacturing test modes. Name the sub-command for
turning on monitor mode.
2003-02-25 00:56:35 +00:00
eb7810a127
Disable interrupts before ACKing them to avoid the obvious race.
2003-02-25 00:51:14 +00:00
0691446706
Following implementation for other RIDs, read the driver's notion
...
of the fragmentation threshold instead of the hardware's notion.
2003-02-25 00:47:11 +00:00
e583f5d9f4
Don't match a PCI graphics card in a system which supports an AGP.
...
Patch supplied by Quentin Garnier in PR kern/19256.
2003-02-24 21:56:00 +00:00
580397c542
back-out previous; it was wrong.
2003-02-24 20:03:02 +00:00
29cd3b6180
fix memory leaks.
2003-02-24 19:58:09 +00:00
3fd1afa7af
Add quirk to probe I-O DATA USB-SC2 as umass.
...
(tested on sparc64 and i386)
2003-02-24 13:11:55 +00:00
b818704815
Regen.
2003-02-24 13:07:52 +00:00
89f39fecfa
Add I-O DATA USB2-SC (USB2.0-SCSI Bridge)
2003-02-24 13:06:45 +00:00
bcd7beec98
initialize b_interlock properly.
...
(for ioctl)
2003-02-23 08:50:58 +00:00
ac161ae918
Remove assigned-to but not used variable.
2003-02-23 04:20:06 +00:00
9bfb5c46f4
Remove unreachable break after return.
2003-02-23 04:19:26 +00:00
5eb4a89fef
Remove assigned-to but not used variable.
2003-02-23 04:15:02 +00:00
f0192b8a3f
Remove assigned-to but not used variable (including nice little switch
...
statement to set said variable).
2003-02-23 04:14:16 +00:00
e40197c4b3
Remove assigned-to but not used variable.
2003-02-23 04:10:11 +00:00
881b65ce01
Use mstohz() in <sys/param.h> rather than homegrown MS_TO_TICKS().
2003-02-22 05:24:16 +00:00
fa7988ee3e
Remove unused MS_TO_TICKS().
2003-02-22 05:18:50 +00:00
29849ba3b6
hz -> Hz
2003-02-22 05:06:36 +00:00
397cf8a482
{HZ,hz,hZ} -> Hz
2003-02-22 04:58:43 +00:00
60a7e59350
hz -> Hz
2003-02-22 04:57:48 +00:00
0ff49f9f99
hz -> Hz
2003-02-21 17:14:04 +00:00
1d6ce76050
Use MIIF_FORCEANEG.
2003-02-20 20:09:56 +00:00
b7fea04c8d
The SonicVibes DMA is broken and only works on 24-bit addresses. As long
...
as bus_dmamem_alloc_range() is missing we use the ISA dma tag on i386.
The iorange for the dma registers now gets allocated near the used range.
Chances are high, that this range is valid on this PCI bus.
This one is really ugly :-)
Approved by: Lennart Augustsson <augustss@netbsd.org>
2003-02-20 12:24:05 +00:00
4630a8e7f3
Add a MIIF_FORCEANEG flag to be passed to mii_attach. This forces an
...
autonegotiation to take place if IFM_AUTO is selected in mii_media_set.
Make the gem driver use it. (XXX hme probably should use it but I can't
test that).
2003-02-20 00:55:21 +00:00
8f45c81f55
Add PQUIRK_NO_FLEX_PAGE for Fujitsu MO MCJ3230AP.
...
This drive returns bogus geometry (0 heads, 0 sectors).
2003-02-19 14:33:15 +00:00
148af81ca0
initialize a simple_lock in softc.
2003-02-19 11:32:13 +00:00
fe29dd94be
Bail out early in isoc_done if the ii is not on the interrupt list.
2003-02-19 01:35:04 +00:00
b3e61b0b56
s/intial/initial/, from jmc in .pl in PR 20414.
2003-02-18 18:47:06 +00:00
d9a7d0e611
Also remove (probably) incorrect comment.
2003-02-18 16:42:40 +00:00
4adb30abcd
hz -> Hz (from OpenBSD)
2003-02-18 16:37:48 +00:00
636e5d57b4
Remove unusable debug code.
2003-02-18 16:36:58 +00:00
8b132e9976
Add uax.
2003-02-18 14:20:11 +00:00
72f6291506
add Intel PRO/100M.
...
from Quentin Garnier in PR kern/20400.
2003-02-18 00:11:53 +00:00
1f01efa58c
regen
2003-02-18 00:10:31 +00:00
ce4e49f957
add Intel PRO/100M.
2003-02-18 00:09:43 +00:00
d62eb597a2
fix a few problems in the last commit:
...
- make sure that the driver checks the battery presence at acpibat_update()
if the battery has been not present, because the driver sometimes
(i.e. boot time or resuming time) miss to sense the presence.
- make sure that the driver always update the status at acpibat_gtredata();
I misunderstood about ACPI_NOTIFY_BatteryStatusChanged event.
2003-02-17 14:37:57 +00:00
47f7f552a2
Don't take xfers off the interrupt list if they are not on it yet.
2003-02-16 23:15:27 +00:00
50e312d584
Add a reference count to avoid detaching while the attach is still
...
waiting.
2003-02-16 23:14:06 +00:00
44563df953
Rework the mixer controls somewhat and give the controls in a FEATURE
...
unit alias names so normal mixer programs can access them.
2003-02-16 18:16:07 +00:00
6a5e88a858
Add a comment.
2003-02-16 17:40:05 +00:00
2eaee0aca2
Split out register definitions.
...
Clean up PHY init a little.
Use two outstanding read xfers to avoid dropping packets.
2003-02-16 17:18:47 +00:00
f27a62da88
- reduce the frequency of updating informations on the power sources;
...
it is very slow to access to EC on some machines (i.e. CASIO FIVA 2xx).
- clean the flags up.
- add locks while updating informations.
- some cosmetic changes.
2003-02-16 16:50:09 +00:00
78521590f2
Make it work (albeit slow).
2003-02-16 13:52:37 +00:00
2fe25d04b8
Check in some work-in-progress (not yet operational).
2003-02-15 18:33:29 +00:00
b3861dad89
Regen.
2003-02-15 18:30:55 +00:00
2f45046cd8
Add two new devices.
2003-02-15 18:30:28 +00:00
22475c164d
__'ify MACHINE_ARCH names.
2003-02-14 18:29:05 +00:00
e077f7a7d9
- add acpi_acquire_global_lock()/acpi_release_global_lock()/
...
acpi_is_global_locked() functions.
AcpiGlobalLock() API should be used to acquire lock between BIOS and OS.
This API cannot be used to lock between threads of the OS side,
because this function immediately returns if the lock is already acquired
by the OS. c.f. AcpiEvAcquireGlobalLock()@evmisc.c
- make sure that acpiec driver uses above functions.
- use ACPI_ALLOCATE_BUFFER instead of twice calls of AcpiEvaluateObject(),
in acpi_eval_string()/acpi_eval_struct().
Twice AcpiEvaluateObject() calls may cause twice side effects
to ACPI machine / hardware and this may be wrong in some cases.
2003-02-14 11:05:39 +00:00
47b9a825ab
Resolve conflict from acpica-unix-20030123.
2003-02-13 14:16:13 +00:00
34d90725e0
Import INTEL 20030123 release.
2003-02-13 13:51:55 +00:00
86e5527901
Import INTEL 20030123 release.
2003-02-13 13:41:53 +00:00
b377c6693a
Preserve the current PHY select bit in the MIF configuration register
...
in mii_readreg()/mii_writereg(). Also restore this bit based on the
currently selected media instance every time we need to reinitialise
the interface.
2003-02-13 12:10:20 +00:00
b43d919954
add SUNTAC Ir-Trinity IS96U
...
from FreeBSD
2003-02-12 15:36:20 +00:00
f6b8f0fcf8
regen
2003-02-12 15:34:53 +00:00
33925bb372
add SUNTAC Ir-Trinity IS96U
2003-02-12 15:34:18 +00:00
05faaa969d
stylistic change: put variable declarations to the top of a function
2003-02-11 10:45:28 +00:00
7f36ac7104
add SUNTAC U-Cable type D2
...
from FreeBSD
2003-02-11 00:02:45 +00:00
6e231f6386
regen
2003-02-11 00:01:24 +00:00
d2e9b4b23d
add product SUNTAC U-Cable type D2
2003-02-11 00:00:43 +00:00
d42c7a04d9
Fix clockctlattach to take an (ignored) int as its parameter, which is
...
what the rest of the pseudo-device attach infrastructure expects. It
didn't cause any harm that the function signature was wrong because it
ignored what it was passed.
2003-02-10 23:20:15 +00:00
84168d80ce
Centralize the interrupt bits for the 3 registers where they are being used.
2003-02-10 21:10:06 +00:00
2411f49e72
make this compile again.
2003-02-10 17:18:33 +00:00
cd6f847ec6
undo constification of 'data' for wsdisplay font - unfortunately we need
...
to be able to adjust the font to display adapter needs very soon (in consinit()),
so it's not possible to do font copy
2003-02-10 14:28:19 +00:00
5f882f6f98
Add in h/w VLAN tag support.
...
Put in code that, if enabled, makes *my* copper Sundance TI cards work-
promiscuous mode is needed for this for now. The default is to have this
off until I or somebody figures out what is broken- I think it's stuff
with the Marvell PHY.
2003-02-10 09:00:38 +00:00
c94277bcbc
Remove NOTAG quirk for the Seagate ST11200N; the cause of the failure that
...
prompted this entry was actually a driver bug.
2003-02-10 08:10:51 +00:00
a417c5b137
Add missing binding of VLAN tag to received packet.
2003-02-09 21:43:43 +00:00
84d62d1796
Roll to latest f/w. Supposed to correct some nasty f/w bugs.
2003-02-09 20:39:13 +00:00
2147742d01
wsfont_lock(): if bitorder/byteorder doesn't match, copy the font to new font
...
also if the font is static (and thus it's 'data' point to const/text location) -
later call to wsfont_rev{bit,byte}() needs to change the font data in-place
print info about the font copy when it's made
problem pointed out by Matthias Drochner
2003-02-09 18:40:31 +00:00
998befbc32
make 'name' and 'data' of struct wsdisplay_font const, mark data arrays
...
in font sources const
2003-02-09 10:29:35 +00:00
1677386f89
Correct typo in an e-mail address.
2003-02-09 10:06:16 +00:00
e3c5d7b092
constify some
2003-02-09 10:04:32 +00:00
d0e6f0f013
- init panpot at reset
...
- whitespace police
2003-02-09 09:28:21 +00:00
9ea2d6b973
Don't do EISA reset on attach. This made the card reset to use default irq, rather
...
than to use the one configured by EISA, and perhaps had some other side
effects - according to Pavel Cahyna, NOT doing the reset improved receive
performance significantly.
This also resolves old thread on current-users regarding this EISA card.
2003-02-08 12:06:13 +00:00
443e6bd05b
regen
2003-02-08 04:21:51 +00:00
b58be339b3
add product
...
National Instruments GPIB-USB-A
2003-02-08 04:21:22 +00:00
79f2f91bad
regen
2003-02-08 04:08:23 +00:00
d334318f81
add product
...
Sun Communications Inc. Mobile-adaptor
2003-02-08 04:07:36 +00:00
6236662a85
change URL pointers of USB[1,2] specification
2003-02-08 03:32:50 +00:00
529cc7ff54
Add more PDAs (untested).
2003-02-07 18:12:37 +00:00
4dee2e92d2
Regen.
2003-02-07 18:08:25 +00:00
a9a792e32c
Add HAndspring Treo.
2003-02-07 18:08:06 +00:00
aed26c3d33
Regen.
2003-02-07 18:06:49 +00:00
05a8763715
Add some Palm and Sony PDAs.
2003-02-07 18:06:23 +00:00
caffbd9ad1
kern/20231- pass the correct argument (arg_addr) on thru to scsipi_do_ioctl,
...
not the locally dereferenced fetch.
2003-02-07 17:36:13 +00:00
9ec14301ad
Remove unneeded #include's.
...
Approved by: Paul Kranenburg <pk@netbsd.org>
2003-02-06 16:20:05 +00:00
enami