unwanted sideeffects in the RB_ASKNAME case. This fixes PR/46732.
No longer wrap MD cpu_rootconf(), as hp300 port stores reboot information
as a side effect. Instead call MI rootconf() from MD code which makes
rootconf() now a wrapper to setroot().
Adjust several MD routines to set the global booted_device,booted_partition
variables instead of passing partial information to setroot().
Make cpu_rootconf(9) describe the calling order.
passed to sysctl_createv() actually matches the declared type for
the item itself.
In the places where the caller specifies a function and a structure
address (typically the 'softc') an explicit (void *) cast is now needed.
Fixes bugs in sys/dev/acpi/asus_acpi.c sys/dev/bluetooth/bcsp.c
sys/kern/vfs_bio.c sys/miscfs/syncfs/sync_subr.c and setting
AcpiGbl_EnableAmlDebugObject.
(mostly passing the address of a uint64_t when typed as CTLTYPE_INT).
I've test built quite a few kernels, but there may be some unfixed MD
fallout. Most likely passing &char[] to char *.
Also add CTLFLAG_UNSIGNED for unsiged decimals - not set yet.
Export non-inline version of pci api for modules (_MODULE is defined).
Fix definition of pc_conf_hook and pc_conf_interrupt.
Switch to using inlines instead of macros.
Switch ibm4xx to use <powerpc/pci_machdep.h>
struct device * -> device_t
struct cfdata * -> cfdata_t
Use <sys/foo.h> instead of <machine/foo.h> if <sys/foo.h> exists
Explicitly include <powerpc/ibm4xx/cpu.h> when needed.
pci_find_rom(), pci_intr_map(9), pci_enumerate_bus(), nor the match
predicate passed to pciide_compat_intr_establish() should ever modify
their pci_attach_args argument, so make their pci_attach_args arguments
const and deal with the fallout throughout the kernel.
For the most part, these changes add a 'const' where there was no
'const' before, however, some drivers and MD code used to modify
pci_attach_args. Now those drivers either copy their pci_attach_args
and modify the copy, or refrain from modifying pci_attach_args:
Xen: according to Manuel Bouyer, writing to pci_attach_args in
pci_intr_map() was a leftover from Xen 2. Probably a bug. I
stopped writing it. I have not tested this change.
siside(4): sis_hostbr_match() needlessly wrote to pci_attach_args.
Probably a bug. I use a temporary variable. I have not tested this
change.
slide(4): sl82c105_chip_map() overwrote the caller's pci_attach_args.
Probably a bug. Use a local pci_attach_args. I have not tested
this change.
viaide(4): via_sata_chip_map() and via_sata_chip_map_new() overwrote the
caller's pci_attach_args. Probably a bug. Make a local copy of the
caller's pci_attach_args and modify the copy. I have not tested
this change.
While I'm here, make pci_mapreg_submap() static.
With these changes in place, I have tested the compilation of these
kernels:
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-eb NSLU2
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE GUMSTIX
HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321 IXDP425 IXM1200
KUROBOX_PRO LUBBOCK MARVELL_NAS NAPPI SHEEVAPLUG SMDK2800 TEAMASA_NPWR
TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sgimips GENERIC32_IP2x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC
As of Sun Apr 3 15:26:26 CDT 2011, I could not compile these kernels
with or without my patches in place:
### evbmips-el GDIUM
nbmake: nbmake: don't know how to make /home/dyoung/pristine-nbsd/src/sys/arch/mips/mips/softintr.c. Stop
### evbarm-el MPCSA_GENERIC
src/sys/arch/evbarm/conf/MPCSA_GENERIC:318: ds1672rtc*: unknown device `ds1672rtc'
### ia64 GENERIC
/tmp/genassym.28085/assym.c: In function 'f111':
/tmp/genassym.28085/assym.c:67: error: invalid application of 'sizeof' to incomplete type 'struct pcb'
/tmp/genassym.28085/assym.c:76: error: dereferencing pointer to incomplete type
### sgimips GENERIC32_IP3x
crmfb.o: In function `crmfb_attach':
crmfb.c:(.text+0x2304): undefined reference to `ddc_read_edid'
crmfb.c:(.text+0x2304): relocation truncated to fit: R_MIPS_26 against `ddc_read_edid'
crmfb.c:(.text+0x234c): undefined reference to `edid_parse'
crmfb.c:(.text+0x234c): relocation truncated to fit: R_MIPS_26 against `edid_parse'
crmfb.c:(.text+0x2354): undefined reference to `edid_print'
crmfb.c:(.text+0x2354): relocation truncated to fit: R_MIPS_26 against `edid_print'
1. Add some new source and header files.
(MAL(split) and RGMII(new) relations for EMAC)
2. Create dcr4xx.h. Its moved from dcr405gp.h. Also remove dcr405xx.h.
3. intr.c supports MULTIUIC with virtual-irq. likes to oea.
support 32-virq/128-hwirq.
4. multiple emac support.
5. WALNUT and VIRTEX_* includes arch/powerpc/conf/files.ibm4xx.
6. WALNUT pci uses arch/powerpc/ibm4xx/pci/.
1. Add some new source and header files.
(MAL(split) and RGMII(new) relations for EMAC)
2. Create dcr4xx.h. Its moved from dcr405gp.h. Also remove dcr405xx.h.
3. intr.c supports MULTIUIC with virtual-irq. likes to oea.
support 32-virq/128-hwirq.
4. multiple emac support.
5. WALNUT and VIRTEX_* includes arch/powerpc/conf/files.ibm4xx.
6. WALNUT pci uses arch/powerpc/ibm4xx/pci/.
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.
The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:
1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.
2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.
I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.
to ensure trap code will work (that is 0 upto ${endkernel}) and leave the
rest to pmap_tlbmiss(). Mapping whole physmem into the kernel wired way
too many TLB entries, see
http://mail-index.netbsd.org/port-powerpc/2006/10/27/0000.html
for performance analysis. While there, be a bit more descriptive in
pmap_tlbmiss() comment and use macro instead of numeric constant.
OK by Simon Burge
introduced ppc4xx_tlb_reserve() API.
* ibm405gp UART0 used to be linear mapped. The VA happens to be inside kernel
segment, giving us the possibility of multiple VA matches in the TLB. This
is considered "programming error" by 405 core and results in "undefined
behaviour". We now avoid mapping peripherals in kernel segment.
* Some boards used to map hardwired RAM size. We now use the real size as
passed in by boot firmware.
* TLB_NRESERVED is (finally) gone.
introduced ppc4xx_tlb_reserve() API.
* ibm405gp UART0 used to be linear mapped. The VA happens to be inside kernel
segment, giving us the possibility of multiple VA matches in the TLB. This
is considered "programming error" by 405 core and results in "undefined
behaviour". We now avoid mapping peripherals in kernel segment.
* Some boards used to map hardwired RAM size. We now use the real size as
passed in by boot firmware.
* don't call consinit() in obs2{00,66}_machdep.c because consinit() is already
called in ibm4xx_init() (but I'm not sure which place is good)
- generic soft interrupts (ie. use powerpc/softintr.c)
- interrupt event counters (using the ones from powerpc/cpu.h:cpu_info
where appropriate)
- cleanup ibm4xx_intr.h, move implementation details to intr.c
Convert all affected evbppc platforms.
OK by simonb@, some points discussed with matt@
