16a062538b
Nuke unused includes, sort decls.
2000-10-19 15:31:20 +00:00
e05c79ba66
Regen.
2000-10-19 15:29:14 +00:00
5110b7e58d
Add Compaq IEAS.
2000-10-19 15:28:50 +00:00
23f6f01a0d
ca -> lsu
2000-10-19 14:35:41 +00:00
15e25fe73f
- ca -> lsu
...
- Hook in twe.
2000-10-19 14:32:20 +00:00
67fe5fbbb4
Update for lsu; untested.
2000-10-19 14:28:46 +00:00
66f3f07ca5
ca -> lsu
2000-10-19 14:27:53 +00:00
dc579413e1
Add DTYPE_LSU.
2000-10-19 14:27:20 +00:00
76e8f8edfe
ca -> lsu
2000-10-19 14:26:41 +00:00
e9b69699e0
Hook in twe.
2000-10-19 14:24:44 +00:00
9813a10184
Driver for the 3ware Escalade family of RAID controllers.
2000-10-19 14:11:30 +00:00
b3434771a3
El-cheapo disk driver for RAID controllers. If this bugs you, let me know.
2000-10-19 14:06:02 +00:00
f39b5cf92e
wrap long lines.
2000-10-19 12:25:04 +00:00
c9b9b0253d
%%<reg> -> %<reg>
2000-10-19 12:15:53 +00:00
5e2d2660fc
In ufs_makeinode(), set the new vnode type to VNON before calling vput().
2000-10-19 10:55:35 +00:00
0c497d25f4
Add wsmouse support.
2000-10-19 10:36:32 +00:00
1b3cb15ca9
Fix errors in mouse event handling;
...
- convert LMR bit pattern into RML since wsevent counts 0 for the leftmost
mouse button.
- found hardware reports mouse button state in negated.
2000-10-19 10:35:34 +00:00
ad74c7dbd6
- Put comment about wsevent structure counts 0 for the left most mouse
...
button with a bit coding improvement.
- signed char -> int to hold integer values. Contributed 16 insn savings.
2000-10-19 10:27:04 +00:00
d239df5374
Adapt for script change: don't assume Ent_lun_switch_entry == 0
2000-10-19 07:22:06 +00:00
8561c00a0a
Regen
2000-10-19 07:20:33 +00:00
67618a69ae
Move restore_scntl3 before the lun switch, to ease freeing of unused lun
...
slots.
2000-10-19 07:20:16 +00:00
5247e9db0b
Regen.
2000-10-19 05:52:15 +00:00
24477b4281
Add the ICS Advent PCI-WDT500/501 watchdog timer boards.
2000-10-19 05:51:34 +00:00
bc4dd913e7
#if 0 unused code.
2000-10-19 05:44:39 +00:00
d66f9f3321
add a cast to fix a warning.
2000-10-19 05:38:35 +00:00
88c611ff12
- remove an unused variable
...
- in db_setpcb(), update 'struct proc *p' each loop iteration. (found by
gcc warning).
2000-10-19 05:30:29 +00:00
1191037add
remove unneeded cast.
2000-10-19 05:28:50 +00:00
d11a1f9bae
kame 1.32 -> 1.33
...
in add_m6fc(), set interface list for all cases.
in response to a report from Hoerdt Mickael.
kame 1.31 -> 1.32
discard PIM register if the version of the inner packet is incorrect (i.e. IPv6)
(according to clarfication of recent discussion in the IETF pim ML)
2000-10-19 03:15:48 +00:00
edd876a35d
validate ICMPv6 too big message.
...
XXX too restrictive given frequent uses of sendto(2)
2000-10-19 01:14:13 +00:00
0b805455eb
Swap reft and light key.
2000-10-19 01:08:15 +00:00
27fcf101a1
prevent stack overwrite due to bzero() arg mistake. from msaitoh.
2000-10-19 01:07:42 +00:00
9288750911
memcpy -> bcopy, for sync with kame tree
2000-10-19 00:40:44 +00:00
44f6bd0d7f
When relocating, there's no need to copy the BSS area.
2000-10-19 00:16:03 +00:00
9d61e4d9a6
Account for the top-most 4 bits of obio addresses being zero on sun 4/100
...
machines, when inferring zs PROM device numbers from the physical address.
2000-10-18 23:55:11 +00:00
76afe54fae
add a clarifying comment.
2000-10-18 21:38:52 +00:00
23a03329ef
verify ICMPv6 too big messages based on TCP pcbs, and/or IPsec SA.
...
TODO: udp6, and sendto consideration. as pmtud is mandatory for IPv6,
it is rather important for us to support those cases.
TODO: more testing
TODO: kame sync
2000-10-18 21:14:12 +00:00
d7ca32a335
s/mtudisc_callback/icmp_&/ so that we don't feel conflict between IPv4 and
...
IPv6 counterpart. (or icmp4_&?)
2000-10-18 20:34:00 +00:00
f629a0ae67
Ops, add proper bus_dmamap_sync() calls for reselect switch operations.
2000-10-18 20:06:54 +00:00
9e8a83c2a4
count successful path MTU changes. good for debugging.
...
(there could be some discussion on when to increase the counter...)
2000-10-18 19:20:02 +00:00
ea9b5a9106
Restructure the Path MTU Discovery code somewhat to avoid
...
entering rtentry's for hosts we're not actually communicating
with.
Do this by invoking the ctlinput for the protocol, which is
responsible for validating the ICMP message:
* TCP -- Lookup the connection based on the address/port
pairs in the ICMP message.
* AH/ESP -- Lookup the SA based on the SPI in the ICMP message.
If validation succeeds, ctlinput is responsible for calling
icmp_mtudisc(). icmp_mtudisc() then invokes callbacks registered
by protocols (such as TCP) which want to take some sort of special
action when a path's MTU changes. For TCP, this is where we now
refresh cached routes and re-enter slow-start.
As a side-effect, this fixes the problem where TCP would not be
notified when a path's MTU changed if AH/ESP were being used.
XXX Note, this is only a fix for the IPv4 case. For the IPv6
XXX case, we need to wait for the KAME folks.
Reviewed by sommerfeld@netbsd.org and itojun@netbsd.org .
2000-10-18 17:09:14 +00:00
9d3f5d7fbd
Adapt for new lun switch script.
...
Implement SCBUSACCEL ioctl.
Snapshot of work in progress on tagged queuing: we can send/receive
queue tag messages. Infrastructure to manage multiple commands per
devices not here yet.
2000-10-18 17:06:52 +00:00
b66120e445
Regen
2000-10-18 17:01:46 +00:00
75246b83c0
Redo the target/lun sw in a better way, and handle queue tag messages.
2000-10-18 17:01:13 +00:00
9836ff3913
Looks like frame size isn't checked; just say we can do VLAN MTU.
...
Tested with a SMC9432TX.
2000-10-18 16:49:13 +00:00
8ec46d1679
Fix off by one error when using RETURN, WHEN/IF ...
2000-10-18 16:05:23 +00:00
26c411de58
Move APbus dependent unmapped DMA address stuff from bus.c to apbus.c
...
Support DMA mapping table with NEWSMIPS_DMAMAP_MAPTBL flag for APbus
(MAPTBL is not tested yet).
2000-10-18 12:47:37 +00:00
90c97a3741
GENERIC root filesys had mistakenly typed nfs. Let it wildcarded.
2000-10-18 08:27:19 +00:00
06700c02aa
move tcp syn cache parameters from in_proto.c to tcp_subr.c.
...
it makes more sense and helps INET6-only (INET-less) build.
2000-10-18 07:21:10 +00:00
b30ca78c9b
Packets have the FCS append so set M_HASFCS.
2000-10-18 05:43:13 +00:00
23c5cbac2e
add missing semicolon to typedef of mode_t
2000-10-18 01:43:18 +00:00
0628f0a87e
knf [from charles]
2000-10-17 23:38:55 +00:00
07f0a9daf8
add '-s' option which will cause the installboot program to recalculate the
...
16 bit sun checksum. This flag is needed when making iso 9660 images which
are bootable on both sparc and vax machines.
2000-10-17 22:11:22 +00:00
3fe32f0197
use __P() in prototype for non-ansi compilers.
...
From: Michael Shalayeff <mickey@lucifier.remote.dti.net>
(we don't ansify it for kame code sharing)
2000-10-17 21:46:42 +00:00
1eb3565937
allow INET6-less build.
...
From: smd@ebone.net (Sean Doran)
2000-10-17 21:16:57 +00:00
23c15f1578
Don't set P_SUGID if the calls to set{e,}{u,g}id(), setreuid(),
...
setgroups() did not result in actual changes. This has the nice
side effect that we don't needlesly allocate new credential and
resource limit data structures.
This is so that non setuid programs that call seteuid(getuid()),
don't end up setting P_SUGID, resulting in broken behavior [i.e.
non setuid ssh, doesn't read ~/.hostaliases...].
This is a good candidate for a pullup, if someone reviews it.
2000-10-17 20:53:45 +00:00
cecccb23b2
quiet chatty boot messages
2000-10-17 17:39:10 +00:00
f87b1573c3
Support ETHERCAP_VLAN_MTU by ignoring the EX_UPD_ERROR and EX_UPD_OVERSIZED
...
status bits. Tested with a 3c905-TX.
2000-10-17 16:16:52 +00:00
5cc13a273b
Support ETHERCAP_VLAN_MTU. It seems the chip doesn't check the frame size.
...
Tested with a NetVin 5000 and a WD8013EBT.
2000-10-17 16:14:42 +00:00
03251ccf07
Pass correct packet length to the upper layer.
2000-10-17 15:57:51 +00:00
d9781d7eb9
add new keyword "initvalue" on pwctl device.
...
if "initvalue 0", set the port initialy "off".
if "initvalue 1", set the port initialy "on".
otherwise keep initial value.
2000-10-17 11:37:20 +00:00
8130f0ec5d
Add a cis decoding function which decodes some CISTPL_FUNCE tuples for
...
disk and network functions.
2000-10-17 10:13:46 +00:00
7cc4fa0618
fix shpcic* iomem size from 0x4000000 to 0x1000000
2000-10-17 10:02:11 +00:00
c258b5a193
delete PMAP_NEW
2000-10-17 09:59:29 +00:00
8a526d9513
Remove sc_lance_dmam field from ioasic_softc structure. It was obsoluted
...
by the removal of ioasic_lance_dma_setup() made in if_le_ioasic.c 1.15.
2000-10-17 09:45:49 +00:00
f3d4ccd750
Have consistent #if's for machine dependent clauses.
2000-10-17 09:27:22 +00:00
77124c056b
Have zstty/zskbd/zsms attached appropriately with standard hardware
...
configuration.
2000-10-17 08:58:42 +00:00
1fd2521475
- efforts to merge TC Alpha and IOASIC DECstation, derived from Mattias
...
Drochner's work made in nisimura-pmax-wscons branch. Still a little
to do before useful for DECstation. MI softintr required.
- allow wildcard matchs to have zstty/zskbd/zsms in default hardware
configuration.
- abandon to check zs_ioasic_cnattach() return value; it doesn't fail.
- have zs_ioasic_cnattach() serial line parameters hardcoded inside, in
symmetry with zs_ioasic_lk201_cnattach().
2000-10-17 08:55:43 +00:00
f9a49b32bf
Don't touch a failed component at all. Thanks to Robert Elz (kre) for
...
noting the problem and providing additional comments.
2000-10-17 03:39:41 +00:00
a7e15e4935
be more friendly with INET-less build.
...
XXX we need to do more to do a working INET-less build
2000-10-17 03:06:42 +00:00
d839a91f5f
Add an IP_MTUDISC flag to the flags that can be passed to
...
ip_output(). This flag, if set, causes ip_output() to set
DF in the IP header if the MTU in the route is not locked.
This allows a bunch of redundant code, which I was never
really all that happy about adding in the first place, to
be eliminated.
Inspired by a similar change made by provos@openbsd.org when
he integrated NetBSD's Path MTU Discovery code into OpenBSD.
2000-10-17 02:57:01 +00:00
028cdb58b4
add '-s' option which will cause the installboot program to recalculate the
...
16 bit sun checksum. This flag is needed when making iso 9660 images which
are bootable on both sparc and pmax machines.
this addresses PR port-pmax/10929
2000-10-17 01:54:30 +00:00
6444136d42
cosmetic change.
2000-10-17 01:50:40 +00:00
1da5a95dc5
Oops, wdt_msec is a short, not a char.
2000-10-17 00:34:41 +00:00
0a2fa5320b
Back out rev. 1.83 -- it's causing problems with some pmap
...
implementations, so we'll have to spend a little more time
working on the problem.
2000-10-16 23:17:54 +00:00
4b0c3e182c
Fix a typo in an constant name that is currently unused.
2000-10-16 23:03:45 +00:00
a5e3251d5f
Register definitions for the Middle Digital, Inc. PC-Weasel
...
serial console board.
2000-10-16 22:59:24 +00:00
7eb3c0fb47
make the MAGIC check be endian safe when clearing the bootstrap.
2000-10-16 13:47:17 +00:00
d01f7f6e2b
correct memory size to be mapped. PR 11242.
2000-10-16 10:26:41 +00:00
c64069308b
Make changes relevant to changes in WWN defaults.
...
Also fix egregious bug where we would never decrement
the islocked recursion counter. I guess this means
that we don't recurse on this platform! All of this should
go away when we have real lock primitives to use in drivers.
2000-10-16 05:18:15 +00:00
c7c2783178
Change some of the WWN macros- eliminate PORT_FROM_NODE_WWN and make
...
sure we have a DEFAULT_{PORT,NODE}WWN and ISP_{NODE,PORT}WWN macro
as a requirement for all platforms.
2000-10-16 05:16:56 +00:00
ffdbddbd79
Add in commented-out hiwater measurement.
...
Remove egregious older bug which had us refusing to log into
fabric devices unless they were NL ports. Whuff.
2000-10-16 05:15:55 +00:00
298ec0ecd9
Clarify/cleanup how node and port names are derived from nvram. Remove
...
clause 2 of licence. Remember to print initiator ID (LOGINFO level).
2000-10-16 05:15:05 +00:00
7cc31292b3
Turn on 32 byte bursting for ISP
2000-10-16 05:13:13 +00:00
3607efd3d7
Remember to establish default PORT WWN. Add in some LOGDEBUG2 messages
...
for the dma mapping code.
2000-10-16 05:12:26 +00:00
8ddb5fd594
roll SBus f/w to latest released level (1.37)
2000-10-16 05:10:37 +00:00
59c8220584
DEBUG_FIND_COMPORT code. (by ngc@ff.iij4u.or.jp)
2000-10-16 03:32:44 +00:00
5b09e159e7
Add sys/proc.h so this compiles.
2000-10-16 03:18:04 +00:00
7088593e82
Hmm- probably really ought to put ses into sparc GENERIC, since sparc
...
machines are one is very likely to run into SES units (what with all
the D1000's && A1000s out there now). I'll do it in sparc64 as soon
as I get that running for myself.
2000-10-16 01:29:06 +00:00
c374cadf43
Get RELEASEDIR setting from /etc/mk.conf. Fixes misc/11104 by Markus Kurek.
2000-10-15 22:42:49 +00:00
4318834442
Don't trim off the FCS, pass it up.
2000-10-15 19:56:31 +00:00
cf67b6ff59
When discarding oversized frame, say how long it was.
2000-10-15 19:49:55 +00:00
b4bbac9584
add Ricochet GS USB modem
2000-10-15 17:53:17 +00:00
d7a216bb96
suppress warning on nd6_storelladdr failure. the failure could happen
...
easily when we have routing table with too many entries. sync with kame.
2000-10-15 15:39:11 +00:00
29fdeefaff
Don't try to handle SIOCSIFADDR/SIOCADDMULTI/SIOCDELMULTI if a vlan/vlanif
...
hasn't been configured (prevent a panic in arp_ifinit when setting an
IP addr with no vlan/vlanif).
2000-10-15 11:58:26 +00:00
7ac8ee6f59
By accident, a previously unused bit in the PTE got used as wired bit.
...
Because of this kvtophys() of wired pages did set the leftmost bit, causing
the pager to hang while swapping. This is now fixed by using another
free bit in the PTE as wired bit instead.
This fixes PR#11121.
Many thanks to Chuck Silvers that found what the problem was!
2000-10-15 11:00:38 +00:00
7bb188de0c
WSCONS_DEFAULT_TYPE is obsolete; use VGA_CONSOLE_SCREENTYPE instead.
2000-10-15 10:08:00 +00:00
339897211a
make this be endian independent. The installboot program now works correctly
...
on big endian machines as well as little endian machines.
2000-10-15 03:14:24 +00:00
b4ef973eab
IDE hard discs seem to work -- turn them on by default.
2000-10-14 23:46:40 +00:00
83666f01fa
Shuffle printfs around so they look right when we've got a drive attached.
2000-10-14 23:45:57 +00:00
a449e4af6d
Ensure that the IOC is attached before any other devices, mostly because
...
the UPC driver needs to know whether the system's got an IOEB in it.
The way this is implemented is a mess -- I need to get my mind round
autoconfiguration again.
2000-10-14 23:44:42 +00:00
7270db5ec0
Change to semantics of irq_establish: IRQs are now enabled by default, which
...
I think is the same as all other ports.
2000-10-14 23:41:01 +00:00
7a4d35b365
In lfs_truncate, don't overcount the real blocks removed from the inode,
...
when deallocating a fragment that has not made it to disk yet.
Also, during dirops, give the directory vnode an extra reference in
SET_DIROP, to ensure its continued existence during SET_ENDOP, preventing
a possible NULL-dereference there.
These two changes should close PR #11064 .
2000-10-14 23:22:14 +00:00
b885772956
The input packet has the FCS attached to set M_HASFCS before passing up.
...
Revove eh = ... since it's no longer used.
2000-10-14 20:06:02 +00:00
5d6a22ffea
Use VNODE_OP_NOINLINE.
2000-10-14 19:14:06 +00:00
3d26e06673
- Initialize zs chip in zscninit() so that kernel can use
...
serial console even if the PROM uses bitmap console.
- Remove zs_hwflags since news68k does not have keyboard nor mouse at zs;
check zschan address set in zscninit() to detect console device.
- Use BPS_TO_TCONST() to set baudrate in zs_init_reg[].
- Remove zs_get_chan_addr(), which is not needed anymore.
2000-10-14 16:45:49 +00:00
230e4ff333
Clarify some intrnames.
2000-10-14 16:23:33 +00:00
ca7bd5f302
Make sure wsmouseopen() returns ENXIO when no VSXXX mouse is attached.
2000-10-14 08:51:51 +00:00
1b5ed35b7a
Re-enable tt0 register temporary to map I/O space.
...
(for framebuffer support)
2000-10-14 07:19:24 +00:00
c8d4a6140c
Regen
2000-10-14 06:23:21 +00:00
30dbba4dd1
Add ATI Mobility M3 (both PCI and AGP).
2000-10-14 06:12:46 +00:00
6e67f82712
Fix wi_intr() to avoid touching card registers during insert/remove events,
...
when sharing an interrupt with other devices:
check sc->sc_enabled, and drop the interrupt if its' off.
Also check for IFF_RUNNING, on advice of Enami Tsugotomo.
2000-10-13 19:15:08 +00:00
86974d7235
Regen.
2000-10-13 18:16:53 +00:00
67c8e3701d
A bunch of scanners.
2000-10-13 18:16:36 +00:00
ec25ea9f3b
Position comment correctly wrt last commit.
2000-10-13 17:59:11 +00:00
6e3a9bc311
validate mbuf chain length on *_ctlinput. remote node may be able to
...
transmit a truncated icmp6 packet and panic the system. sync with kame.
2000-10-13 17:53:44 +00:00
65d3436a47
Make this compile without "options news5000".
2000-10-13 17:22:52 +00:00
831fce13ac
In mfs_start(), move the handling of outstanding I/O requests to before
...
the check for unmounting the filesystem.
Appears to fix kern/10122 from Hitoshi Matsunawa.
2000-10-13 16:53:53 +00:00
7bf589b1ae
There is no need to explicitly include <uvm/uvm_extern.h> for
...
<sys/sysctl.h> anymore.
2000-10-13 16:40:26 +00:00
764c5e3eea
Recognize HP 5300C.
2000-10-13 16:18:48 +00:00
8abfde6138
Regen.
2000-10-13 16:18:22 +00:00
54480a36e4
Add HP 5300C.
2000-10-13 16:18:02 +00:00
2898929f94
Revert previous since the finnish keymap is already present under
...
the name "sv". Note to myself: Read PRs completely before acting.
Note to Santa Claus: I want a mailing list that carries all follow
ups to PRs!
2000-10-13 12:53:23 +00:00
b5b3e28ce7
Add uscanner.
2000-10-13 12:31:10 +00:00
c49fc8469f
void cast for lint.
2000-10-13 03:53:26 +00:00
6572421763
make sure we don't share external mbuf between m and mcopy, in ip_forward().
...
should solve PR 11201.
2000-10-13 01:50:04 +00:00
07a9408ae6
Move ofwboot to 600000 hex. Should make loading better (less likely to
...
run into OF internals).
2000-10-13 00:19:30 +00:00
3a05d9ba7b
Avoid empty strings for vendor&product.
2000-10-12 23:11:04 +00:00
4ed4915295
Regen.
2000-10-12 22:51:42 +00:00
0b0fb8e466
Add Kingston KNU101TX Ethernet adapter.
2000-10-12 22:51:20 +00:00
87a8c94ed0
Sanity check the cursor position read from the 6845 and if clearly
...
off-screen, set it to 0x0. From dean@huxley.org .
2000-10-12 22:36:30 +00:00
6b7dd5a41a
add sunkbd.c and sunms.c; apparently these are now needed because
...
tty_conf.c brings them in.
2000-10-12 21:27:13 +00:00
6708aee34f
add missing kd_attach_input routine.
...
someone needs to clean this shit up.
2000-10-12 21:26:28 +00:00
5fd4c9fe04
Remove a '^G'.
2000-10-12 15:42:47 +00:00
06ab77c680
typo fix in comment (stallen -> stolen)
2000-10-12 12:42:52 +00:00
8a9e5b82d3
typo in comment (consifuration -> configuration)
2000-10-12 12:42:03 +00:00
38fd6528ac
Add finnish keymap, from Heikki Kallasjoki in PR/11186.
2000-10-12 12:41:22 +00:00
50159b60f0
Add support to boot on APbus machine (e.g. NWS-5000).
2000-10-12 05:34:29 +00:00
3a909c64a6
Use splnet instead of splimp in wi_ioctl.
2000-10-12 04:50:58 +00:00
0a5e7f9f3f
enclose offsetof macro definition with #ifndef offsetof ... #endif
2000-10-12 03:42:33 +00:00
4c00a9d6aa
Bail out initailzation on buffer allocation failure.
2000-10-12 03:29:59 +00:00
fc40c38df6
Minor fixup for a printf(). Noted by Robert Elz.
2000-10-12 03:28:49 +00:00
29780c8cd7
add Tulip (tlp) at apbus
2000-10-12 03:18:41 +00:00
3c201cca80
change the type of the apbus interrupt handler from void to int
...
for each driver to indicate the interrupt has been handled or not.
2000-10-12 03:17:25 +00:00
935577e7bc
Tulip driver for NWB-5852A, which is an APbus board with DEC-21140A chip.
...
without MII. It supports 100BaseTX only. Half duplex/Full duplex can
be specified manually, but there are no auto negotiation functionality.
XXX: It takes 34 seconds before sending/receiving packets on the wire
after initial setup. It is obviously a bug because the board
just works fine on NEWS-OS, but I cannot find what's wrong...
Once it starts working, it seems there are no problems.
2000-10-12 03:15:59 +00:00
31624ad662
use macro to access interrupt mask register.
2000-10-12 03:15:21 +00:00
f2c3050d29
change the type of the apbus interrupt handler from void to int
...
for each driver to indicate the interrupt has been handled or not.
2000-10-12 03:13:47 +00:00
be4c939451
change the type of the apbus interrupt handler from void to int
...
for each driver to indicate the interrupt has been handled or not.
add prototype of apbus_dmatag_init() function, which allocates memory
and initialize its member including bus space handle to flush DMA write
cache. Note that the allocated pointer must be freed.
2000-10-12 03:12:01 +00:00
655ba83924
Allow multiple interrupt handler on same interrupt event.
...
Clear interrupt mask for specified interrupt in apbus_intr_establish().
Add dma stuff; define apbus_dmamap_sync() to flush DMA write cache by
accessing the corresponding I/O port.
2000-10-12 03:11:38 +00:00
de22372491
Use 1MHz freerun counter for microtime().
...
Show address for bus error, and DMA address error.
should be panic, but only printf for now.
2000-10-12 03:10:37 +00:00
68f82490a3
Support scsi boot device for NWS-5000.
...
Support NWS-3700, which is very similar with NWS-3400.
Do not depend on modelid of idrom, which is useless in most cases.
2000-10-12 03:10:07 +00:00
ad