thorpej
12b0c2a20a
The Alpha console uses BOOTP for network booting, so the NetBSD kernel
...
should, too. Enable the BOOTP support in nfs_boot().
1997-09-13 07:42:01 +00:00
thorpej
27e54e6dc3
Prevent an extra newline from being printed if the root device is a network
...
interface.
1997-09-13 07:38:25 +00:00
thorpej
6b2d5c18a7
Correct a comment regarding the sense of the nfs_boot_rfc951 global.
1997-09-13 06:16:04 +00:00
thorpej
f784e8dc15
Apparently, new AlphaStation 500/600 firmware has the same problem with
...
PCI master aborts as eb164 firmware, so use the same workaround mechanism
on all system types (clear error register's master abort bit, and check
it after accessing configuration space), not just eb164's.
This also fixes a bug on eb164's - when making the Alpha port compile
again, I made an error that caused this to not be used on eb164 systems,
either. Thanks to Matt Jacob for pointing out this goof.
1997-09-13 05:58:07 +00:00
mjacob
f762783999
Wierd- well, what isn't with devices? Anyway, the type code for the ISP
...
chip on AlphaStation 500 is 2- which wasn't handled, and bad things happened
because the default case wasn't sane. Both are corrected now.
1997-09-13 05:18:30 +00:00
enami
b4ae3706db
Use the same indentation as other two place, sys_ptrace() and
...
procfs_control().
Ok'ed by Jason R. Thorpe.
1997-09-13 04:25:35 +00:00
phil
378e2bc162
Add Lennart Augustsson <augustss@cs.chalmers.se> to supporting cast.
...
Closes PR4106.
1997-09-13 00:05:22 +00:00
thorpej
4f7a116064
Add missing "break;" statements in the code that determines the
...
media setup by the Alpha SRM console software.
From Ross Harvey <ross@teraflop.com>.
1997-09-12 22:40:02 +00:00
phil
1507e4ad2c
Make endwin() save state so a subsequent call to wrefresh restores curses
...
and makes endwin()/wrefresh() act like a SIGTSTP.
1997-09-12 21:08:22 +00:00
mycroft
33aa7a562f
f before t...
1997-09-12 17:42:08 +00:00
drochner
8f33476972
Make console on multiport cards more likely to work (obvious bug,
...
fix still untested).
Closes PR kern/4095 by enami tsugutomo.
1997-09-12 13:31:10 +00:00
drochner
daf8124106
regen
1997-09-12 11:05:20 +00:00
drochner
e4c20d6210
another graphics chip...
1997-09-12 11:04:36 +00:00
drochner
d8f1d9401e
Adjust packet len in mbuf header for incoming broadcasts.
...
Closes PR kern/4087 (by myself).
1997-09-12 10:58:31 +00:00
drochner
a14fe6a191
fix an rc.conf flag check which was broken with the "checkyesno" changes
1997-09-12 10:36:04 +00:00
mycroft
a9155c5057
Set the status word as well, and remove a bogus comment.
1997-09-12 10:29:20 +00:00
augustss
78b5eb1f52
Create DMA maps on ordinary GUS (non-MAX) cards. Now it should work again.
1997-09-12 10:27:10 +00:00
mycroft
701aa39854
Oops; didn't delete two retval[] usages in setregs().
1997-09-12 09:59:53 +00:00
drochner
52157361c2
avoid to mount /usr twice if LKM load already did it
1997-09-12 09:53:08 +00:00
mycroft
cba224ed23
FPCOPROC is no longer used here.
1997-09-12 09:29:13 +00:00
mycroft
4e5b47eba3
fputype is defined in locore.s now.
1997-09-12 09:27:49 +00:00
mycroft
11393fe5b9
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC. Merge some of the
68060 floating point stuff from the x68k port.
1997-09-12 09:25:36 +00:00
mycroft
5933da103c
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC.
1997-09-12 09:23:18 +00:00
pk
27f2065c2c
Update syscall() and setregs() in the wake of the recent execve() changes.
1997-09-12 08:55:01 +00:00
mycroft
cd9a968cb7
Fix a test that should be on fputype rather than cputype.
1997-09-12 08:41:55 +00:00
mycroft
8a42aeac7b
GC old comment.
1997-09-12 08:35:15 +00:00
mycroft
8a8fa1ee59
Eliminate some uses of FPCOPROC.
1997-09-12 08:19:00 +00:00
mycroft
1192cdbe7e
FPCOPROC is already in the Makefile; no need for it here.
1997-09-12 08:14:06 +00:00
mycroft
30073771b6
Move definition of FPCOPROC into the Makefile, since it's always required.
1997-09-12 08:13:26 +00:00
mycroft
e9f392b0a9
Eliminate some uses of FPCOPROC.
1997-09-12 08:08:50 +00:00
mycroft
55582e5bc2
The FPCOPROC option no longer exists.
1997-09-12 08:04:12 +00:00
mycroft
49f0bbb105
Nuke Locore.c. It's way too out of date to be useful at this point.
1997-09-12 07:59:20 +00:00
mycroft
895a1eced4
Fix an error from when Locore.c was removed.
1997-09-12 07:56:37 +00:00
mycroft
50cfb2fcdd
Kill vestiges of Locore.c.
1997-09-12 07:55:17 +00:00
mycroft
982f24e698
Always initialize all registers in setregs().
1997-09-12 07:00:30 +00:00
mycroft
42c101eb00
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-12 05:48:08 +00:00
mycroft
25f153bb22
Add fe0.
1997-09-12 05:22:55 +00:00
mycroft
761c2e275a
Fix bogus comment.
1997-09-12 05:20:52 +00:00
mycroft
73b4fdacad
Initialize all registers in setregs().
1997-09-12 05:01:09 +00:00
jtk
6e0f2df205
minor mods:
...
* BIOS for NCR only needed to boot
* eliminate redundancy in APM description
* wordsmithing on driver inclusion in INSTALL kernels
1997-09-12 03:39:12 +00:00
mycroft
d0917c65e9
Add an ibcs2_setregs().
...
XXX Current implementation is a horrible kluge.
1997-09-11 23:07:25 +00:00
mycroft
99a6404735
Add an ibcs2_setregs().
1997-09-11 23:05:30 +00:00
mycroft
3f70f046fc
Fix wait(2) and waitpid(2) emulation; it's the responsibility of the syscall
...
stub to copy %edx to *status, and trying to do it here loses with some libc
versions.
1997-09-11 23:05:02 +00:00
mycroft
16a8787248
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-11 23:01:44 +00:00
phil
5388cd2717
Don't print some things if -f flag given.
1997-09-11 22:53:00 +00:00
chopps
44f6ba6c55
VM_MAX_ADDRESS is the user max address -- adjust
1997-09-11 14:01:07 +00:00
mrg
b23947b599
make a link to master.passwd.5 from passwd.5
1997-09-11 07:42:20 +00:00
scottr
0dc499822e
Document the reboot command.
1997-09-11 07:10:21 +00:00
scottr
4658336eda
Add a 'reboot' command with a single parameter specifying the boot flags.
1997-09-11 06:55:56 +00:00
pk
ae6bc354b9
Use the macro PC_ADVANCE(), if defined, to skip over a breakpoint.
1997-09-10 19:37:31 +00:00