103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
70dcf0b5f6
Undo a hack added in the last overhaul (which caused an extraneous byte
...
to be written to the target). Also, use the sc_min_dma_len field
to determine whether to use PDMA or PIO.
1997-04-28 15:59:20 +00:00
b3192632db
On alpha, sizeof (long) != sizeof (int) and sizeof (int) != sizeof (ptr_t)
1997-04-28 15:52:44 +00:00
ac6fbba3ac
On alpha size_t is not an int, ergo last argument to dma setup glue
...
function can't be a pointer to an int.
1997-04-28 15:43:47 +00:00
2b65c6c346
Delay turning off P_TRACED until the process is actually waited on. It can't
...
have any signals delivered while exiting, so this should be okay. Change the
test for a traced process in wait4() to exclude a process that was started by
the debugger; in this case, only one SIGCHLD should be delivered.
1997-04-28 13:17:05 +00:00
7c37cb4c4b
Compile the Dutch message catalog.
1997-04-28 09:00:20 +00:00
03a704030c
Added Norwegian libc error messages/signal names, donated by Stig
...
Venaas <venaas@nvg.ntnu.no>.
1997-04-28 08:49:31 +00:00
973c5ca8b5
Corrected ETOOMANYREFS message, provided by Matthieu Herb.
1997-04-28 08:36:21 +00:00
701f15db33
Reinstate P_FSTRACE, with different semantics:
...
* Never send a SIGCHLD to the parent if P_FSTRACE is set.
* Do not permit mixing ptrace(2) and procfs; only permit using the one that
was attached.
1997-04-28 04:49:27 +00:00
fbb54fd51b
meantion ppp(4) rather than README.bsd (inspired from PR#3548 from Martin Husemann)
1997-04-28 04:22:24 +00:00
8a33a13c65
Minor code cleanup.
1997-04-28 03:49:57 +00:00
5e34cc98aa
Fix several errors and remove out of date comments.
1997-04-28 02:59:44 +00:00
43a0dc8b74
Remove remnants of P_FSTRACE, which is no longer used.
1997-04-28 02:51:41 +00:00
ead5e1a6f7
When stopping a process being traced through procfs, wake up the *parent* (in
...
case it happens to be doing a WAIT.
1997-04-28 02:36:05 +00:00
e725c03060
When checking for init, compare against initproc, rather than comparing the
...
PID. No functional difference.
1997-04-28 02:29:52 +00:00
217c4e14ea
Fix several deficiencies, as compared to ptrace(2):
...
* Did not check for P_SUGID on ATTACH.
* Did not check for tracing of init on ATTACH.
* Did not turn off single-step mode on RUN or DETACH.
* Might have screwed up reparenting in some cases.
* Allowed anyone to detach the process.
1997-04-28 02:28:39 +00:00
36b2c99667
Add support for an ntpdate_hosts variable.
...
settings:
NO: don't run ntpdate on boot
DEFAULT:extract a list of hosts from /etc/ntp.conf
otherwise, a list of hosts to poll with ntpdate
1997-04-27 23:17:56 +00:00
547d95a029
Remove esp FLUSH when residual bytes are present in FIFO, the ncr53c9x
...
driver will flush when necessary. Doing the FLUSH here interferes
with DMA-enabled target selection.
1997-04-27 22:12:40 +00:00
94eaf1bb04
Implement target selection using DMA.
...
To allow a period of testing the variable `ncr53c9x_dmaselect' is used to
enable this feature (default is 0, i.e. the old behaviour).
1997-04-27 22:08:51 +00:00
70ce55d5d7
Update for changes in machine-dependent COMPAT_HPUX code.
1997-04-27 21:40:47 +00:00
97a6c32e58
Garbage-collect a bunch of _very_ hp300-specific code, most of which
...
doesn't work anyhow (due to current and future fundamental differences
between NetBSD and HP-UX device semantics). This can probably be shared
with other m68k ports now.
1997-04-27 21:38:57 +00:00
ba0a5d5c58
Bump version: Better SPU detection code
1997-04-27 21:18:31 +00:00
8b4cae0516
CPU -> SPU
1997-04-27 21:17:13 +00:00
3cb561ed9f
Don't define our own machineid values - pull in <machine/hp300spu.h>
1997-04-27 21:15:14 +00:00
fbad957c52
Update getmachineid() for new machineid values.
1997-04-27 21:13:55 +00:00
767517edcc
Don't even look for a Domain keyboard if we're not a 400, 425, or 433.
1997-04-27 21:12:43 +00:00
5b511796c1
Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425. Adapted by me from
...
code provided by Mike Smith. While I'm here, convert this file to use
macros from <machine/asm.h> rather than making assumptions about how
C labels are handled.
1997-04-27 21:10:06 +00:00
dbf4f7b71f
* Tidy PHY [sic] selection code in epsetmedia().
...
* epinit() had both explicit xcvr selection for 3c589 and a call
to epsetmedia(). The first is redundant; delete it, and EP_COAX_DEFAULT.
* Update comments to reflect 3c589 and 3c509B fixes. Fix typos.
1997-04-27 21:09:56 +00:00
cdb54b8d65
Update for new SPU options.
1997-04-27 21:06:29 +00:00
b27a863b02
Generate option headers for SPU type options, so that we may generate
...
dependencies on them.
1997-04-27 21:05:49 +00:00
772891accd
Use information provided by <machine/hp300spu.h> to determine if we
...
might have a physical address cache.
1997-04-27 21:02:34 +00:00
650df29d4d
These files depend on things in <machine/hp300spu.h>
1997-04-27 20:58:55 +00:00
18a931000e
Use <machine/hp300spu.h> to determine if we might have a physical address
...
cache.
1997-04-27 20:54:39 +00:00
544f501d29
Rewrite identifycpu() to be partially table-driven, and to be more
...
sane in general. Since we can uniquely identify each SPU type
(except for 318/319/330, because there _are_ no differences, really),
require that the appropriate SPU option be configured into the kernel.
1997-04-27 20:53:30 +00:00
d62e267a0c
Uniquely identify 345 vs. 375 vs. 400 and 380 vs. 425, useful when
...
looking for hp4xx-only hardware during autoconfiguration. Code
mostly from Mike Smith, with a few changes by me.
1997-04-27 20:50:01 +00:00
9d4c5c9106
- Define new machineid and mmuid constants.
...
- Rearrange slightly.
1997-04-27 20:47:23 +00:00
fc79829eab
#include <machine/hp300spu.h>
1997-04-27 20:43:37 +00:00
80ff0f0f2f
- Move a bunch of hp300 SPU-specific stuff out of cpu.h, and place it
...
in new hp300spu.h file. This includes the code that associates
model number with cpu/mmu/cache combinations.
- Define "mmuid" constants for several models, derived from code
provided by Mike Smith.
1997-04-27 20:37:07 +00:00
f5ccce44c8
srt0.s renamed to srt0.S via repository copy Magick - we want this
...
file to be preprocessed before it is assembled.
1997-04-27 20:29:43 +00:00
d25f63a7bf
What was I thinking?
1997-04-27 19:26:48 +00:00
dd33340fea
Indicate file handling failures by exit codes >0; fixes PR/3538 from
...
David Eckhardt <davide@piper.nectar.cs.cmu.edu>.
1997-04-27 18:34:33 +00:00
5b3e1d439a
"Slice" does not translate to "splitten".
1997-04-27 18:30:30 +00:00
5c869c4c5b
The delay loop needs 8 cycles, not 3, on the 68030; so use _that_ value
...
for the pre-calibration.
1997-04-27 18:14:34 +00:00
186a8bd2e4
Don't SEGV if a qualifier is passed without an argument. From
...
Geoff Wing <mason@primenet.com.au>, fixes PR #2700 .
1997-04-27 16:58:22 +00:00
65a1c6544a
Fix tyop (accidentally snippedl line).
1997-04-27 11:58:46 +00:00
1b80d8dd97
Add other isapnp id's for the 3c509.
1997-04-27 09:46:50 +00:00
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
89ea27100f
Update media selection, add 100Mbit info.
...
Add cross-references to parent buses.
1997-04-27 09:43:05 +00:00
bf37fc50d0
Rename the PROD_ID to PROD_ID_3C509 to make it possible to add other
...
product id's, e.g. for the 3c515.
1997-04-27 09:42:34 +00:00
a2e1f15ba7
- Replace the check for EP_BUS_PCMCIA in epsetmedia with a check for
...
EP_CHIPSET_3C509 and change it a bit so it works now with the 3c509
and still works with the 3c589.
- KNF
1997-04-27 09:38:50 +00:00
mycroft