b85a24ec4e
get rid of stray printfs (turn them into "lprintf"s)
1993-09-28 21:26:59 +00:00
fd156a97fa
New i386 code.
1993-09-14 17:28:06 +00:00
1c880d62bf
As of this revision, all known bugs have been fixed. Some of the fixes include:
...
1) fixed 3c503 lock-up if the thinwire cable was disconnected at boot time
2) 8013EBT boards now work (quite well!) in 16bit/16k mode
3) ED_NO_DOUBLE_BUFFERING flag now works
4) slightly higer performance (about 3%) with 16bit WD/SMC boards
5) support for WD8013WC (10BaseT) boards
Additionally, the probe code has been reorganized to be much cleaner. This
revision of the driver is 1.25. The release notes have been updated as well.
1993-09-09 09:40:56 +00:00
0535b6089e
Avoid clash of struct ns_addr with #define ns_addr.
1993-09-06 18:30:39 +00:00
4475f55d8f
Include systm.h to get prototypes (and possibly inlines) of *max functions.
1993-09-04 00:02:48 +00:00
9aed375ba3
tty XXstart() routines return void
1993-08-29 13:46:31 +00:00
62164fe535
Add find_isadev() and have sysbeep() use common defines.
1993-08-28 00:13:00 +00:00
225917bfe6
0.9 "official" patch 001:
...
(1) added support for ed1 in both generic kernels at:
device ed1 at isa? port 0x250 net irq 9 iomem 0xd8000 vector edintr
(2) brought if_ed.c up to DG's 1.19 rev.
1993-08-26 00:26:50 +00:00
4543c1ebfd
changes from 0.9-ALPHA2 to 0.9-BETA
1993-08-23 04:59:38 +00:00
e5ea45d312
there are some devices out there which use... NO I/O PORTS!
1993-08-08 09:54:23 +00:00
4a385c1228
with -Wall would bomb, on incomplete type 'selinfo'. bpfilter.h include
...
moved down, and select.h included.
1993-08-03 01:52:57 +00:00
4862b84c92
Add RCS identifiers (this time on the correct side of the branch), and
...
incorporate recent changes in netbsd-0-9 branch.
1993-08-01 19:22:24 +00:00
7b2afa7fe6
incorporate changes from 0-9-base to 0-9-ALPHA
1993-07-28 02:20:34 +00:00
8141ce5d83
kill damned RCS Log
1993-07-19 16:58:20 +00:00
886f6afa56
Reading file marks or writing end of tape return 0 bytes, AND THEY
...
DON'T SET THE ERROR BIT ON THE BUFFER UNLESS THE AUTHOR OF PHYSIO
IS STUPID!
1993-07-19 16:44:38 +00:00
331148c31a
Make these files GCC 2 happy.
1993-07-17 16:20:24 +00:00
2ee2073a53
scsi_switch had wrong entries for these controllers...
1993-07-17 11:00:09 +00:00
ba408056a6
Use splnet, not splimp.
1993-07-13 21:53:06 +00:00
6cc173695a
moved bfdttach point to same place as other drivers, from greenman
1993-07-12 13:13:41 +00:00
3be4221095
Change tty code to use clist interface, but with ring buffer implementation.
...
Also, fix a couple of bugs in tty.c and pccons.c, and some gross kluginess
in the hp300 stuff.
1993-07-12 11:36:53 +00:00
0daaa4f16c
Make splimp = splnet | spltty, and get rid of SLIP kluge for splnet and
...
spltty.
1993-07-11 14:03:51 +00:00
80dc38edb3
documentation error
1993-07-08 08:22:17 +00:00
1eacd36710
pccons.c now dynamically allocates it's "struct tty"
...
cons.c's "struct tty *cn_tty" wasn't used by any of the kernel, and goes away.
1993-07-07 11:00:23 +00:00
bab148ba4e
delete inclusion of rlist.h again. grr.
1993-07-07 06:52:39 +00:00
9bff90a5c1
added a timeout debugging mode to wd.c so that people can see how slow
...
their controllers really are. Look for the WDCNDELAY_DEBUG definition.
1993-07-07 05:50:35 +00:00
d670635e8b
ok, 5 second command timeouts..
1993-07-07 01:05:42 +00:00
ceec40c98f
clean up code for timeout/untimeout/wakeup prototypes.
1993-07-06 06:06:26 +00:00
86999439b2
number of changes:
...
1. controller reset code moved into one function, called from more places now.
2. more places now do timeouts. TIPCAT code turned on.
3. blew away the unused WDOPENLOCK test code.
4. delay is now done using WDCNDELAY repetitions of DELAY(25). Up to 2.5 second
pause accepted from controller (some controllers have some commands that are
actually this slow)
5. some of the old timeout code was really whacked.
1993-07-06 00:42:43 +00:00
2d53469109
get rid of extraneous inclusion of rlist.h
1993-07-06 00:31:52 +00:00
2cb34d6d65
added a missing {/} pair that barsoom seems to have taken out, but
...
which the standard 386bsd 0.1 driver did have. This is for a piece of
code in the bad block handling. found/fixed by hpeyerl.
1993-07-05 04:44:48 +00:00
3322c7b691
all timeout code now calls DELAY() so the timeout delays are the same
...
length on all processors. Where possible, the controller is reset if it
times out.
1993-07-05 03:20:57 +00:00
ed61b76822
increased the timeout inside wdcommand(). Some controllers impliment some
...
commands very slowly.
1993-07-05 00:08:27 +00:00
7e940b55e0
add support for David Greenman "ed" driver
1993-07-03 12:21:07 +00:00
d77e126ab2
add support for David Greenman's "ed" driver.
1993-07-03 12:19:36 +00:00
3c4b913d33
Fix a bunch of things.
1993-07-01 00:24:09 +00:00
f7dd4be020
Updated comments.
1993-06-30 04:13:34 +00:00
51ac6a0997
ANSIfications.
1993-06-27 06:27:29 +00:00
277c73694e
print "maddr 0xd0000 msize 65536" as "maddr 0xd0000-0xdffff" instead.
1993-06-20 07:24:53 +00:00
d1ed63195d
fix the divide-by-zero problem w/old disks. this patch is ws's "fault."
1993-06-18 20:45:35 +00:00
5a2b8d1abb
Fix typo.
1993-06-16 02:59:42 +00:00
94df11ad63
Make sysbeep() take a frequency, not a timer count, and add constants
...
BEEP_FREQ and BEEP_TIME which can be overridden in the config file.
1993-06-16 02:57:17 +00:00
528edf6037
Move definitions of TIMER_FREQ to timerreg.h, and fix value of CF for DELAY().
1993-06-15 21:37:14 +00:00
930a773dce
Clean up beep code a miniscule amount, add interrupt protection, and
...
make multiple beeps generate a continuous tone.
1993-06-15 20:34:54 +00:00
5592ad3fbb
Ignore interrupts if the device isn't open. This prevents stray interrupts
...
from hosing the works. What a stupid architecture.
1993-06-15 01:50:32 +00:00
925a429d35
Reduced bus-on time from the default of 11ms -> 9ms, to prevent floppy from
...
becoming data-starved during simultaneous fd & scsi activity.
1993-06-14 04:16:03 +00:00
f37ee25bb2
sigh. one day i'll finish this driver, meanwhile, one more fix..
1993-06-10 04:50:42 +00:00
f6779cbdce
minor silliness related to two or more controllers
1993-06-09 22:36:40 +00:00
f1b8c74730
make getc() and ungetc() be rb{un,}getc(), so getc() and ungetc()
...
don't conflict w/ansi prototypes...
1993-06-06 23:04:42 +00:00
8a05b36058
incorporate Bruce Evans' interrupt changes, as hacked by Rod grimes,
...
for patchkit patch 158. it appears to work well.
1993-06-06 04:14:01 +00:00
9d6a908bb7
patch from rgrimes to add delay to let data port stabilize, also
...
make "lpflag" unique to each driver
1993-06-05 22:58:29 +00:00
cgd