0b87087d0c
"initialse" looks nice, but is not correct.
2002-09-04 01:12:03 +00:00
604d7cb2eb
implemented, not implementated; arbitrary, not arbritrary.
2002-09-04 01:07:12 +00:00
aae8095f40
completion, not completition; mark up errno; use \- instead of -.
2002-09-04 01:03:58 +00:00
c4beccd3bf
completion, not completition; use \- instead of -.
2002-09-04 01:03:24 +00:00
0822a37f3c
heavily, not heaviliy.
2002-09-04 00:59:44 +00:00
3c4b7573d6
initialize for consistency.
2002-09-04 00:47:12 +00:00
9b2aeac54a
Some more markup.
2002-09-04 00:41:40 +00:00
5f06c1dc25
file system, not filesystem; swappable with two ps, and mark up some paths.
2002-09-04 00:26:08 +00:00
3b79a9cb49
eg -> e.g.
2002-09-04 00:19:15 +00:00
a4aac7d5c0
tunneled with one l only.
2002-09-04 00:12:52 +00:00
b19f6de011
ispell.
2002-09-04 00:09:23 +00:00
3b81281107
tunneling and tunneled with one l only.
2002-09-04 00:04:20 +00:00
8e9d888f97
Support this device, which is evidently a rebadged GEMTEK WLAN which we
...
already support under another name:
wi0 at pcmcia0 function 0: NETGEAR MA401RA Wireless PC, Card, ISL37300PEval-RevA
wi0: 802.11 address <whatever>
wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
2002-09-04 00:04:03 +00:00
91d888cd38
avoid SIOCSIFADDR if there's an IPv4 address already.
...
the comment doesn't match the behavior, it seems that the code assumed that
there's only one IPv4 address on an interface. sync w/kame
2002-09-04 00:03:58 +00:00
a4e86e6cd5
Found the issue with the kinetic bootloader.
...
Seems that we assume that the dram blocks are sorted, and that the first/lowest address is also where the kernel is.
If the above is not true, then we're on a kinetic (probably should make a better way to indicate this) So search for all dram blocks < with starting addr lower than the first block and remove them.
Currently there's minimal performance gain (which is odd as the SDRAM is meant to be faster, I'm wondering if we need to prod some hidden registers to set timing information.
Note that I still get 16MB/s compared with 7MB/s on RiscStation and 93MB/s on my cats. I'm thinking that something else is seriously nasty on acorn32.
2002-09-03 23:00:40 +00:00
ec793cfe29
Unset PWD so that pwd is guaranteed to return a physical path.
...
This fixes PR 17313. Thanks to Ian Dall for providing the fix.
2002-09-03 22:03:48 +00:00
672ed5ea6a
Fix a few typo's in the kinetic support.
...
Seems that kinetic support doesn't work, it hangs after branching into the relocation asm code.
Time to start debugging this stuff.
2002-09-03 22:02:02 +00:00
2c1216208f
Replace mr with gtp device.
2002-09-03 18:55:47 +00:00
405cd45f89
Replace the mr driver with the gtp driver. From OpenBSD.
2002-09-03 18:54:41 +00:00
2f5aeb92d3
Use a different way to recognize tea5759 chips. From OpenBSD.
2002-09-03 18:53:40 +00:00
8531949548
When -r is given actually pass the file through of, and also enable if.
2002-09-03 18:35:11 +00:00
0007acff8b
Fix the PARTID for the original 79c970, from Dave Barnes, kern/18029.
2002-09-03 17:57:49 +00:00
6fcbc6b230
regen: Cabletron 22xx (AMD LANCE/PCnet Ethernet) addition
2002-09-03 17:42:54 +00:00
5c2a73c8d7
According to kern/17695, the Cabletron 22xx works with the NetBSD
...
Lance Ethernet driver attached to isapnp. Add it to the list.
2002-09-03 17:42:26 +00:00
0683880e19
* Add "getcache" and "setcache" commands to get/set basic cache
...
parameters (enables, really).
* Fix an error in the manpage.
* Shuffle some code to group things together better.
2002-09-03 16:56:05 +00:00
c9dafdb84c
Increase the default stack limit to 2M (from 512K on sparc and 1M
...
on sparc64).
2002-09-03 16:24:35 +00:00
df86ef5a9f
Split raidframe parity checking/rebuild out into raidframeparity, which is
...
called after quota so we don't end up with fsck and raidframe parity rebuild
taking forever after a crash/reboot.
While we are here check for raid[0-9].conf & raid[1-9][0-9].conf not
raid[0-9].conf & raid[0-9][0-9].conf
2002-09-03 15:35:51 +00:00
26ebf5f371
Several fixes hostap for awi driver:
...
- aging ang clear inactivity stations
- DTIM field in beacon/probe response.
- ignore IFF_PROMISC for hostap mode, since 802.11 has 3 address fields,
so that promisc mode is not required for AP function.
2002-09-03 14:54:00 +00:00
c0a8cbae7c
drop garbage packet (due to chip bug) before injecting it to bpf.
...
make sure to behave as IFF_SIMPLEX, some lance chips does not behave as
IFF_SIMPLEX (e.g. vmware in outgoing multicast case).
http://mail-index.netbsd.org/tech-net/2001/05/16/0001.html
2002-09-03 14:48:16 +00:00
42ebaa698b
don't touch free'ed memory. From: wang.zhong3@zte.com.cn, sync w/kame
2002-09-03 14:38:13 +00:00
4fc0806163
Ignore EINVAL returned from fsync(2) because it is the expected error code
...
if we try to use it on a pipe.
2002-09-03 06:17:26 +00:00
5a29cadda3
add back some cache flushes that are actually necessary.
...
any time we remove all access to a given virtual page,
we must invalidate the (write-through) L1 dcache.
pmap_remove() still had it, but pmap_kremove(), pmap_clear_reference()
and pmap_page_protect(VM_PROT_NONE) didn't and needed it.
fixes PR 18040.
2002-09-03 05:08:21 +00:00
bd93d53f7c
Add /var/run/utmpx, requested by soren.
2002-09-03 00:56:08 +00:00
4ca44777d6
Correct the printout of the partition start and size values.
2002-09-03 00:35:53 +00:00
ae8d1b60df
When breaking an loan due to a page fault, check to see if the other
...
kind of reference-holder (anon or object) is referencing the page. If
not, then the page must be removed from the pageq's.
Reviewed by Chuck Silvers.
2002-09-02 21:09:50 +00:00
57ec33c922
s/==/!=/ when checking for counter wrap-around.
2002-09-02 20:04:25 +00:00
acee215136
Add SIMCA (sitting in my chair amused).
2002-09-02 19:02:20 +00:00
f9ab2f4618
g/c a bit of DEBUG code which crept into the last commit.
2002-09-02 14:03:22 +00:00
c3eb6d5b68
Add a function which dumps the machine state following a nested
...
critical section fault.
Also, in the regular trap() handler, use &proc0 if curproc is NULL.
2002-09-02 14:02:03 +00:00
693ffb8185
Catch the case where a synchronous exception occurs during the critical
...
section of another exception. This is likely to happen if the kernel
stack is misaligned, has dropped off the bottom of the PCB, or has
otherwise gone into orbit.
In this case, switch to a safe stack, save as much of the machine
state as possible and dump it to the console.
2002-09-02 14:00:25 +00:00
f9fe8e4707
Go to splhigh() before enterring ddb(9).
2002-09-02 13:55:03 +00:00
efcfc3e1c8
Add experimental support of Host-AP mode for awi driver.
...
It works also with WEP enabled.
But aging the associated clients is not implemented yet, so that the number
of clients may increase unlimitedly..
2002-09-02 13:37:35 +00:00
89e1f79b11
Fix a typo, from Lubomir Sedlacik in misc/18147.
2002-09-02 13:05:24 +00:00
4bbf4d2f6f
remove one comment; warp some lines.
2002-09-02 12:54:40 +00:00
449ee49a3d
Decrease the vertical frequency.
2002-09-02 12:14:34 +00:00
45501e0df2
Regen.
2002-09-02 12:13:35 +00:00
89532d8b32
Introduce NO_PHYS_NETWORK as a define in the FALCON kernel. This define is
...
used to turn off the vlan, bridge and pppoe pseudo devices and the NETATALK
protocol.
2002-09-02 12:10:46 +00:00
84ccd9ee4b
call grfcc_probe() and viewprobe(), even when we are not the console.
...
This fixes a panic when using a serial console and wsconscfg.
(The monitors list wouldn't be initialized in grfabs.c)
2002-09-02 11:09:48 +00:00
2a7a3cc2f8
In the _EXCEPTION_EXIT macro, don't use r24 until we've finished
...
accessing the kernel stack, since a TLB miss on the kernel stack
will result in r24 being trashed.
Also clear the ES_CRITICAL flag just before returning to the
previous context.
2002-09-02 08:41:56 +00:00
ed2badbd21
make vers.c depend on ${SOURCES} and remove .PHONY tag for it, so that it
...
would only be regenerated if any of the input files changed
2002-09-02 07:33:11 +00:00
wiz